Can the frequencies (eg 457.045) on the Harxon radio be configured/input on the Harxon unit itself, or does it need to be connected to a computer program to change?
@@e38surveysolutions59 hello did you try this one from emlid store store.emlid.com/products/reach-rs-cable-2m-db9-male-connector?variant=47253642150193
Yes, we use a DB9 to USB C cable that connects to the DB9 of the included data/power cable of the radio. We include that cable with the radio when we ship it out. That's on the base side of things. If you're referring to receiving corrections with the RS3 there is a built in UHF Radio that will pick up those corrections from the radio so long as you have the UHF antenna(e38surveysolutions.com/collections/emlid-reach-rs3/products/emlid-uhf-antenna ) attached.
Sir, Thank you , could you please send me a link of the DB9 to USB C cable?Same as your cable, I want to try just like your video @@e38surveysolutions59
Yes, you can use an RS2 as a base with this radio. You would need another radio to receive corrections from it with an RS2 however, since it doesn't have the 450MHz receive-only radio that the RS3 has.