Look what I found inside this pw50 engine! Finally fixed! 

i picked up one for 250 $ a year ago. going to work on it this fall. came with extra parts. my kid is gona love it.

IT LiVES again!!!! Thank you, it was the reeds. Cleaned them up and turned them over

Awesome!!! I received a yellow pw50 for free with another bike purchase, I assume it's early 80's. It won't start. It has an aftermarket carb, which is probably crap but seems fine inside. Still won't start. I was thinking about pulling it apart and checking the reeds. Hopefully it fixes mine. If it starts after that, I'll invest in an OEM carb and maybe rebuild the top end

Good stuff . Got a 2000 model for 300.00 compression is 32 psi, gonna check that Reeeeeeeeed. Thanks and congratulations on your victory over the Rock sub scribed.

Gota love the way you refer to the bit of debris as a rock.😉

Nope it just ran out of gas meng. This took me back to my son , 15 years ago man. I made sure that he had me beat so it was his 2nd birthday. ! Mine was my forth. I had a blast I built up a sick crf 150 f it’s a 04 model . I did springs and upgraded to 25 weight maxima or torco . Ordered a power jet Mikune

Couldn't help but laugh that it sat not running for years due to a rock in the reed, and first startup after repair you didn't put a filter on it. Lol. Did the "break in" kill it?!

Man now you got me thinking its reeds, i did the top end on my sons old p dub and it was good the first couple rides but now its back to taking a ton of kicks to get it running. His compression is 90 and the cylinder is a cheap chinese top end, its questionsble. Anyways thanks for the idea your kids bike sounds good!

Thats so weird i had the same exact issue and wondered for the last 2 years how it got in there or where it came from! I cannot believe this has happened to another person😂 i thought it was just murphys law for me

Hey brother, I’m restoring an early 90s model pdub for my daughter, was just a pile of parts when I got it. Now I have it running and I’m doing the cosmetic stuff.. I see how the gas tank and front fender mount, but can’t figure out mid/rear fender.. am I missing parts or do you have to buy mounting kit or something?

Was it flooding when you tried to start it

Quick question: the tiny tube that runs from my PW50s oil pump and connects to the carb on the side was leaking and falling out. I found a way to make it so the tube no longer falls out and stays in place, but then oil starts leaking from little crevices in the carb itself, almost like the bike isn’t accepting the two stroke oil or something. Any ideas why this may be happening?

the vapor looks mint

Hello sir I bought the same one but after some years there was no spark but sometimes, there is . If you could make an video about I would be grateful 🙂

Boy that is one heck of a dinky little bike when its fully assembled. This looks like half of dinky. What would that be called? 😂

Nice 👍

that's a boogie may of came out of the last owner nose i think.