No video :(

Loose, Wobble Crank Pulley! Honda Prelude 😡🤯

Подписаться 52 тыс.

Просмотров 70 тыс.

50% 1

#WobbleCrankpulley #loosepulley #hondaprelude
Help support the Channel to grow
www.buymeacoff...
#automotive #cars #car #auto #carsofinstagram #carlifestyle #carporn #bmw #automotivephotography #instacar #carphotography #carswithoutlimits #photography #instacars #automobile #supercars #cargram #supercar #audi #ford #porsche#focused #mechanic #repair #utorepair #technician #carrepair #cars #car #wrench #wrenchlife #toyota #racing #carstagram #mercedes #carlovers #mechanic #s #luxury #diy #ferrari #turbo #carspotting #v #luxurycars #jdm #amazingcars #carcare #honda #autorepair #f #r #motorsport #bhfyp #engine #classiccars #autodetailing #volkswagen #carinstagram #instagood #mk #design #drive #detailing #sportscar #x #amg #otomotif #mercedesbenz #vehicle #technicalskills #automotiveindustry #womeninautomotive #womenwhowrench #womenintrades #womenwhobuild #womenempowerment #women #yesican #bethechangeyouwanttosee #panelbeatersunited #panelbeater #automotive #autobodywork #collision #autobodylife #garage #collisionrepair #automechanic #snapon #autorepair #automotive #auto #mechanic #car #cars #carrepair #autoshop #autoservice #repair #collisionrepair #autobody #autorepairshop #oilchange #autobodyshop #autoparts #bodyshop #carcare #mechaniclife #autobodyrepair #bmw #carservice #brakes #carsofinstagram #automechanic #collision #automotiverepair #tires #autorecycling #service #garage #carmaintenance #mechanics #engine #autodetailing #toyota #junkyard #audi #autorepairs #usedautoparts #vehicles #maintenance #mercedes #carrepairs #autopart #carparts #salvageyard #partsforsale #honda #partsforcars #autocare #performance #autowrecking #usedparts #ford #towing #dentrepair #salvage #mechanical #tools

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@snowuchiha1515 3 года назад

I love the guy asking all the questions lol it feels like I’m asking and you’re answering 😁 awesome

@jfGarage4k 3 года назад

I know eh. He wants to learn

@michaelanthony3216 3 года назад

I want to say thank you for this video! I have a 97 Accord that was infamous for throwing timing belts and noticed the pulley was wobbling a little but still worked. Last week this exact problem happened to me and after seeing this actually work it gives me hope it can be fixed. I'm going to give it a shot this coming week. Thanks again!

@jfGarage4k 3 года назад

Thanks! Love this awesone feedback goodvibes.

@michaelanthony3216 3 года назад

@@jfGarage4k I bought everything I need even a torque wrench today. Waiting on a new woodruff key to come in on UPS. My torque wrench only goes up to 150 ft. Lbs. Can I just set torque to 150 and over tighten just a bit and this work just fine?

@jfGarage4k 3 года назад

Ya dial in 150Ft lbs and after give a quarter of a turn should be set good

@michaelanthony3216 3 года назад

@@jfGarage4k thanks! Will do! I'll let you know how it goes!

@michaelanthony3216 3 года назад

@@jfGarage4k I finished it up yesterday and it worked perfectly! So far so good. I let the Loctite blue sit over night. Thanks again!

@sarahsmith4617 3 года назад

I like how you spin it then laugh lmao. That's when you that shi* is broken haha. Great video!

@USUCKER1990 4 года назад

Factory ass nigga your a g for knowing this shit 100

@juanlanda2441 3 года назад

Very common problem as the crank area where the balancer attaches is only half inch, and it spins . It should be tighter .i did a crank kit and replaced a new pulley and it still wobbles. Maybe i got a crank that already had issues. So my best bet was to either install a shim or epoxy the balancer to make the hole slightly smaller until it fits tight and then make sure to place locktight on the bolt and torque it to specification.also replace with a new keyway

@rosesbite 10 месяцев назад

One of the better videos I've seen on this issue

@IssaBuiltCivic 2 года назад

Thanks my guy👏 Crank pulley started wobbling after I hit 150 on the interstate with my buddy

@jfGarage4k 2 года назад

Hope you guys are okay? Could imagine crankshaft pulley looking like after?

@irisbaez1972 Год назад

PreludeOwner, that's not funny.

@TonioXenon Год назад

Mine started wobbling after I hit 125 in my accord sport. Too much sauce.

@project_ej2 3 года назад

I've got a 95 EG Coupe, with a B18b1 swap, and noticed some wobble on my crank pully with it running today. No weird noise. But definitely going to check that bolt.

@rudyv8320 2 года назад

I have the same wobble on my b18c1 today and I probably will change mine ASAP because it might be hitting the timing cover

@MA-fk5ot Год назад

Bro thank you, I couldn’t get the crankshaft holding tool to fit 👌

@jfGarage4k Год назад

Glad I could help

@SimplyDarknes Год назад

Noticed a rattling sound, popped the hood, 2.2L VTEC 97 Honda, and there's a wobble on the crankshaft pulley. It's a daily driver so maybe a one day fix? I'm a Chevy girl, this is my first Honda.🤣👍

@jfGarage4k Год назад

That crankshaft bolt probably super loose. Get it done before you lose it

@SimplyDarknes Год назад

@@jfGarage4k thank you for responding!!! Imma put it up on ramps and do it tomorrow, tighten the bolt.

@jfGarage4k Год назад

Your first honda, "Nice" make sure have a honda crank pulley holder ready to take out that stubborn crank bolt or what i use is this belt trick Pulley Holder, i made tons of this short videos on my channel check it out

@kevinnn7436 4 месяца назад

Hey bro I’m having problem with my crankshaft bolt it gets loose every 5-10 minutes sometimes if I rev the car it loosen up I bought a new bolt as well nothing work with that when I torque the bolt it keeps spinning to where it isn’t even tightening

@sheldonm3535 4 года назад

That’s crazy! I’ve never seen one can spin a crank pulley by hand!

@jfGarage4k 3 года назад

Hahah supa strong 💪 🤣

@vsaucehere2634 2 года назад

Such an easy fix if your lock on the crank shaft for the pulley is okay. Giving me hope

@Arykperry 3 года назад

That’s a harmonic balancer btw

@jgarcia690 4 года назад

Crank snout is still damaged it will give out again like mine

@jfGarage4k 4 года назад

We replaced it with a spare crank pulley kicking around the garage. Still running strong as we speak 💪

@NamTran-nl5mi 9 месяцев назад

hey man! just found out about this vid and it’s helped me to start fixing my own ludes harmonic balancer. I got a new pulley but it doesn’t fit like my old one, the diameter of the teeth inside seems to be smaller so it wouldn’t sit on properly, did yours fit on nicely? any help is appreciated!

@jfGarage4k 9 месяцев назад

Return the part and get another one. Im thinking they package the part wrong

@sammynavaIII Год назад

Thank you! Great video!!

@jfGarage4k Год назад

Thanks for checking it out.

@pojdiavaj1422 4 года назад

Your mechanic forgot to tight it to spec. 162# or more.

@raiderman28 2 года назад

Nice work.

@danielhuerta8817 5 лет назад

Same happend to my 93 ej1 civic

@Xjulienalay21X Год назад

anyone else’s pulley stuck between the engine and the engine bay? my pulley pulls out but hits the side wall before i can slide it down, so i have to just keep messing around?

@jfGarage4k Год назад

You need to Remove the Driver engine mount to lower the engine ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TMW_m9JlFTM.html

@poisondaddy 3 года назад

I lost the crank/balancer while driving yesterday and barely made it back home. Was wondering if you could damaged something since that fell off while driving. The timing belt looks like it slip a bit off to the side. What is your opinion??

@jfGarage4k 3 года назад

This happened to me before, That original crank pulley probably the hole in the center is bigger now it better to get a new or old replacement one. The crankshaft is a tough steel it should be ok its the pulley the one you need to replace that pulley is cast steel and put a new crank bolt while your at it. Timing belt slip a bit hmmmmm, the car start fine? Better to double check your timing marks and timing tensioner make sure the timing belt tight

@poisondaddy 3 года назад

@@jfGarage4k Thanks for the reply. I jacked it up and I inspected it. The place where you put the key to lock the crank to the pulley is kinda stripped too. Do you think i can get away without replacing the crank? Will the crank/pulley bolt be able to hold it well? The tensioner pulley is kinda sketchy. It doesn't have the spring the it attaches it to. I just got it a few months ago and I barely started messing with it.

@jfGarage4k 3 года назад

Can u send me couple pics of the crank and timing tensioner please. I have a Facebook page created (Jasmine Father garage) You can message me from FB and send me pictures please

@blazeaglory Год назад

Rubber in the ring detaching as well

@jfGarage4k Год назад

The rubber is part in the crank pulley. Replace the pulley with new ones

@jamirezxdetailing9277 5 лет назад

This mechanic messed up my 98 civic i rebulit everything and change every single thing on the car and when i ask him to change the water pump and timing belt he didnt put the ping right and it stripped everythibg and the bolt stripped the inside and tbe car is just there sitting 😪

@jfGarage4k 5 лет назад

Oh wow that's horrible, so what happened to the civic?

@jamirezxdetailing9277 5 лет назад

Jasmine & Father Garage i still have its just sitting there you have a fb i can show you

@raymondmerkson1393 4 года назад

Oh wow he wojld have to buy u a new engine the thing with those type of cases u would have to prove in civil court that his work was the reason

@ianjennings8372 2 года назад

1998 prelude with the same issue just not as severe. I was able to pull the bolt and get it loose. Key is half sheared but I can’t even get the pulley off due to the body being in the way. Do I drop the engine a few inches? Likely going to need a timing pulley for mine as well given the condition of the key. Any help appreciated!

@layneaube6074 2 года назад

did u end up having to drop engine?

@ianjennings8372 2 года назад

@@layneaube6074 yes but only a few inches with the jack bolt on the motor mount. Was pretty easy. Turned out that the crank was beyond saving without pulling the motor so I snagged up and h23 and a tunable ecu. It’s at the tuners getting finished up now. On the plus side my civic just snapped the timing belt. Here we go again lol

@Riddlemethisgaming 3 года назад

99 prelude here same problem...hope i didnt strip the crankshaft

@jfGarage4k 3 года назад

The crank shaft are solid steel they are strong. The balance pulley are cast steel this well give out before the crank

@Riddlemethisgaming 3 года назад

@@jfGarage4k Thats actually pretty smart engineering..well hopefully i just need a pully..this is the 3rd one..its like it wont sit on there flush and keeps slinging the belt

@jfGarage4k 3 года назад

Get a new keyway if this your 3rd pulley already.

@lahirushamal6899 3 года назад

My pulley also loose. I tightened and again it loose. Then I tighten again. Now ok. But why that happens. Loosing the pulley? 😑

@jfGarage4k 3 года назад

Thats probably why, Who ever installed it previously did not torque the crank pulley bolt in the right spec. Overtime its loosen it self out, make sure torque it to spec and to make sure in the future put a drop on blue lock tight on the bolt treads.

@lahirushamal6899 3 года назад

@@jfGarage4k thank you very much 🙂

@fokanerantsieng4642 2 года назад

Thanks for sharing. I had same problem and bought new crank pulley and same problem keeps on happening. The crank pulley bolt gets loose after a while. What do you suggest. Thanks

@vitocimino 2 года назад

I thinlnk whoever installed it last time forgot to torque the crank bolt. Keyway may have been in wrong too. Not 100% on that.

@GalenlevyPhoto 4 года назад

I hope you will reply. Please help. I have a 2000 Honda Civic ex with a broken crank pulley that is more looser than what you showed in the video. I don’t have an electric impact drill, how can I break it loose with a breaker bar with extension pipe? The crank pulley cannot be held since it’s loose. I wanted to take it off so I could see if it’s repairable. Thanks!

@jfGarage4k 4 года назад

U need to hold that crank prevent of spinning. You have 2 options 1st Put it on gear and hold the brake pedal, have another person to brake loose the crank bolt with a breaker bar. Another 2nd option, grab your self a longnose vise grip and clamp/lock the flywheel with this tool, this well hold the crank shaft in place for Not spinning. Hope this help out champ good luck

@GalenlevyPhoto 4 года назад

Jasmine & Father Garage thank you very much! I’ll try having someone hold the brake. It’s an automatic tho. I never even thought of the flywheel trick. Very interesting!

@jfGarage4k 4 года назад

If its automatic the brake pedal trick not going to work, clamp the flywheel is the best option for you champ. Good luck

@user-or4zm5py3h 2 года назад

Nice video! 👍👍

@alexisnieto1781 3 года назад

What’s the name of the tool u using too tighten the screw on the pulley

@jfGarage4k 3 года назад

Hey Alexis: That tool is a digital torque wrench

@userfr95333 4 года назад

did you just put the pulley with the old key?

@jfGarage4k 4 года назад

No, We got a good spare pulley with a old key and it fit nice and tight, so far its running strong

@userfr95333 4 года назад

@@jfGarage4k but you didnt take out the old one?

@jfGarage4k 4 года назад

The old key? NO we did not change it. it was stuck in good but it look okay its no damage or anything

@ryomensukuna1150 Год назад

Hi, i have a similar problem too, mine was changed the bolt to bigger size. I just got the car with the issue already. Is it dangerous to use or should I get crankshaft and replace it?

@jfGarage4k Год назад

Replace the Crank Pulley, key and the both same size what came out

@truckermoore65 3 года назад

Why didn't you show how the key way goes on?

@MrRobfell 3 года назад

Good job bro 👍

@jfGarage4k 3 года назад

Thanks! Love this awesome feedback champ thanks goodvibes.

@johnbarker7640 4 года назад

Is the crank shaft supposed to be splined to fit the pulley splines? Trying to fix one for a friend but I think it may have made the crank shaft smooth

@YuckFou0x0FFFF 2 года назад

There are no splines. Only a keyway and woodruff key

@SkywallGuttz 4 года назад

I swear the bubble on my tread knocked mine loose...

@jfGarage4k 4 года назад

Yes its possible.

@alcyon2sp 4 года назад

Your rubber dampeners are still intact. how ironic.

@jfGarage4k 4 года назад

Oh Ya I know! lucky it was just the crank pulley Not the crank shaft😥

@jactive1111 2 года назад

Great video

@brianbdpbdp5725 4 года назад

u skipped the whole putting the belt on again

@jfGarage4k 4 года назад

Hey thanks for the comments. Yes i did skipped it, its pretty easy to install the belt, i dint wanna record the boring part. alot of videos on here how to install the belts on H22.