Lowbrow Customs - Motorcycle Handlebars 101

Подписаться 106 тыс.

Просмотров 154 тыс.

50% 1

www.lowbrowcustoms.com/motorc...
Todd walks you through the differences between dimpled and non-dimpled handlebars. He talks about what to look for when picking a set of bars and how to determine if a handlebar will be right for your bike. Todd also goes over why there are two different size holes on your new set of grips and some inexpensive throttle tubes.
00:30 - 2:35 - Dimpled vs Non-Dimpled Handlebars
2:36 - 4:31 - Cable and Brake Cable Length
4:32 - 6:36 - Grips, Why there is two different hole sizes, installation help.
6:37 - 8:44 Riser Info, Difference between Risers and bars with built in risers.

Авто/Мото

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@dont.ripfuller6587 17 дней назад

I don't need any handlebar info, I'm just stopping in to say Lowbrow is the shit and thanks guys for doing what you do! 😘

@amyshilling7412 5 лет назад

I"ve been in the industry for 10 years and this is the first time that this has been explained in a way that is completey "dummy-free". Thanks Todd and LowBrow!

@TheAftHole 4 года назад

These videos are more help than you guys can imagine. Thanks a bunch!

@qazwsx1212zzzzzxxxxx 4 года назад

Just got a 2019 883. Todd is the "ONLY" person who has explained how my new bars might fit....."TIPS" AWESOME!!!!

@jerryswope1797 2 года назад

Lots of good information that first time builders like me. Been riding for years but now I'm building a scoot from scratch. Once again Thank you .

@phillipternullo4934 4 года назад

Excellent video Todd ! You really covered some points that could save some real headaches. Or even injury .

@jpgrinter5566 4 года назад

Todd you legend ! Finally someone tells us the centre to centre measurement for Harley triple tree spread ! 3 1/2 inch. Thank you Dude !

@BoiseG 7 лет назад

Good info and definitely saved me a headache. Subscribed.

@dbwaggoner 5 лет назад

Thanks Todd, I will check out the site next.

@sandrariver9376 7 лет назад

I only watch these because Todd 😍

@troy7978 4 года назад

Todd's the man

@ryanmoore2779 3 года назад

Todd’s a True Wizard! Thank you Todd

@djbaar3301 6 лет назад

Excellent cover all video!

@anthonygiannini2350 5 лет назад

Thanks for info man! Keep up the great stuff! Subed!

@roberymcgoff1904 4 года назад

In 1971 I bought a 64 Bonnie not knowing a think about it could have used Todd in those days. Mort

@Iowawalrus 6 лет назад

Very thorough.

@ecrusch 2 года назад

Todd is the coolest!

@blackcat9volt 7 лет назад

Thanks, as always, for the education. Can you do a similar discussion of springer forks, their special qualities, problems, and accessories?

@lowbrowcustoms 7 лет назад

blackcat9volt I'll look into what we carry and what we can talk about and see if we can make it happen, cheers - mikey

@samnewman7264 Год назад

Very informative 👍

@jaimepatriciosanchez6418 2 года назад

You are a mix between triple H and Paul bostaph bro 🤘🤘... your look is cool Thank for your video!

@miamimotogroup5371 2 года назад

Very helpful video

@michaeluresti3027 4 года назад

Good info from todd

@cantnz 4 месяца назад

Thanks Gandalf the grey!

@anthonyhayes1202 2 года назад

Murdock 10" pullback slims with moto or mid bend bars are unbeatable. Period

@harrylionelharrisiii2135 6 лет назад

Thanks.

@Ask-me2 3 года назад

I love this guy

@michaelmitchell5909 4 года назад

Awesome store and people...

@journeybus7785 3 года назад

Very informative brother man, preciate the tips. Sub'd

@chrissmith7669 3 года назад

Looking to swap the “mini apes” on my 2020 with some lower ones. Just a drop of about 4” like the other softails have.

@emilior7240 5 лет назад

What a cool guy... i just got my first bike in a long long time 30 plus years I would say, and I love the feeling of riding it. It’s got ape hangers and even though I like them I kind of want something lower but aggressive My bike is a 2004 Suzuki Volucia 800 What do you recommend? I want something badass

@pedrothomas4944 Год назад

you very smart looking young man great info thanks

@justinreedflynn 5 лет назад

Todd's cool

@daveco1270 3 года назад

I swapped the handlebars out on my CB750 for the first time last summer. Creating the switch wire holes with a hand drill and a dremel was a huge pain in the ass but I got it done. Do people really call and complain that the grips they ordered are different sizes? That's funny (and embarrasing). Sounds like something I would've done when I first started.

@lowbrowcustoms 3 года назад

all the time, everyday...

@ELMARQUESO 3 месяца назад

What's the song at the beginning!!! Sounds badass

@lisar3006 4 года назад

I got a 2002 FLSTC that had ape hangers on it I have only owed Shovelheads. I went to swap out these bars n and it turned into a dog and pony show. I just want some nice stock handlebars but all four sets I have don't work. Sorry I ever bought the twin cam I have two I am selling the Road King so I can tract down a good Evo.

@michaelduffy2375 4 года назад

Nice bars. How would I lower the diameter of my bars? Grips too big.....

@andyhamilton6715 4 года назад

Who's that opening song by? That's a killer groove!

@dry509 4 года назад

Like your jacket. What brand? What bike do you personally like? Thanks.

@Mad1Mullen 3 года назад

What would be the torque for the rabbit bars ?

@triumphguy9031 6 лет назад

Ca. Y all do some stuff for the new Brit bikes . Luke triumph speedmaster

@moorda9431 8 месяцев назад

Jack Wylde reviewing handlebars

@jmcelroy4872 4 года назад

Why i bought my bars internally wired

@yohon1550 7 лет назад

How bout a video on risers that dont slip or how tos on how to stop apehangers from moving . I have seen some bagger clamps that have built in set screws, I need something like that for a softail that clamp where the top clamp is expose chromed and nice.

@Bladsmith 7 лет назад

Does your handlebar have knurling?

@yohon1550 7 лет назад

Yes they do but they slip, I have 18 inch aps when I hit a bump, or when I try to push the bike around with the bars there is to much leverage. I would drill and pin them but all wires are inside the bars ,. This is a common problem I have read countless complaints. There are a number of micky mouse solutions out there but I would think some would make a set of risers or top clamps with a set screw built in. They do make top clamps with set screws but only for baggers that the clamp is hidden. I want one that chrome and looks nice.

@Bladsmith 7 лет назад

Hm. Perhaps you could slip a piece of sheet metal inside the bar to protect the wiring while you drill two holes on it, then drill and tap short holes on the inside of the clamps to fit a small length of threaded rod? I don't know what exactly you meant by pinning, but this should do the same thing with nothing visible.

@yohon1550 7 лет назад

baggernation.com/item.php?iid=75 This is what I want but chromed. been looking for a long time. nobody makes them, someone should.

@andrewbull3537 4 года назад

Any chance of a free lowbrow customs poster /sticker???? (could hurt asking),cheers ,take care on the road

@Dawgoalie2 4 года назад

i just purchased a new bike and the guy i bought it from put 24 in width handlebars on it. It is comfortable but i felt like slow tight turns seemed a bit more difficult than should be normally. He gave me the stock handlebars with it, however I am not sure if i should put those back on or not seeing how much of a difference it would really make. The new bars have an 8 in rise to them and the height is definitely comfortable.So do you recommend me just getting used to the narrow bars or would swapping it back to stock be better even though they are much lower? thanks

@Ask-me2 3 года назад

I mean with you .... Sorry

@davidcook9616 Год назад

Harley had sportsters in 1952??

@lowbrowcustoms Год назад

Yeah the K model. Bottom end is the same as the Ironhead and was the original Sportster

@nastynotch8314 5 лет назад

Yep.... I’m the cutter :(

@puntmedias Год назад

Am I the only idiot that called the number?

@BillRiccio 7 лет назад

0:17 the sub button is in the opposite corner

@lowbrowcustoms 7 лет назад

thats weird cause my phone and computers its on the right side

@lowbrowcustoms 7 лет назад

bottom right hand of the screen there is a little LWBRW logo that says subscribe, there is a huge one on the left from youtube...

@BillRiccio 7 лет назад

i watch on a regular desktop pc and i saw no logo annotation pop up on the screen, oh well whatever!

@lowbrowcustoms 7 лет назад

super weird... Next vid I'll make sure who it ever it is says "hey man hit that subscribe button below and point downward in all directions ahahah" Cheers man hope all is well and thanks for the feedback! Take care. - Mikey