Тёмный

Lower Control Arm Replacement .Chevy Cobalt 

Gabriel Auto Technician
Подписаться 8 тыс.
Просмотров 59 тыс.
50% 1

On This Video We showing The Procedure How To Remove And Replace The Lower Control Arm Replacement. On A Chevy Cobalt
I Appreciate the calls that lots of people Throughout the USA makes to my phone number, thanking me for record and upload my videos, it makes me feel proud, that I am helping people to save or to make some money.
I am making my videos with lots of love and with the meaning of helping you people.
Thank You For watching my vids.
Thank you for all the comments.
Here Is This Link If You Like To contribute. Thank You.
www.paypal.com/paypalme/Gabri...
If you found this video and it was useful,
Please Like It, And Subscribe To My RU-vid Channel.
/ gabrielautotech
So you can help me,
And I can upload more videos.
Thank you.
Thank you for choosing our services.
We always do our best to serve you better and fix your car properly.
Your Friendly Expert Automobile Repair Technician.
With more than 40 years working in the auto repair field.
I am working on cars since they have contact points ignition
and carburetors when most of the built cars came with no air conditioning.
We Are Here To Help With All Your Auto Repair Needs.
We have the knowledge and the tools to do the job right.
Gabriel Auto technician
413 Highway 100,
Laguna Heights, TX.
956 346 3484.
Auto Repair Shop.
Auto Air Conditioning Repair and Recharge
Brakes,
Tune-Ups,
Radiators,
Shock Absorbers,
Water Pumps,
Timing Belts,
Oil Change,
Fan belts,
Struts,
Suspension,
Transmission Service,
Computer Diagnostics,
Paint and Bodywork.
Iron Welding.
Thank You for your like on our page @
/ gabrielautotech
Subscribe To My RU-vid channel@
/ gabrielautotech
/ gabrielautotech
www.yelp.com/biz/gabriel-auto...
business.google.com/b/1158464...

Авто/Мото

Опубликовано:

 

17 янв 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@user-lw8jk6nv7l
@user-lw8jk6nv7l 3 года назад
Nice video, I was good with having to drill and grind my old video but was too lazy to have to pull the control arm, but apparently it's easy af, good job!
@jonathanryan2915
@jonathanryan2915 2 года назад
Wow, I thought there would be more to take apart, thanks for this video
@Jean-ei5ws
@Jean-ei5ws 2 года назад
good video, i need to do both control arms on my gf 08 cobalt. wish me luck, its a canadian car so rust everywhere underneath the car
@jimmartell3813
@jimmartell3813 2 года назад
This is a very good video very helpful thank you.
@bustownbc2787
@bustownbc2787 3 года назад
Good video very helpful
@chrishouse5753
@chrishouse5753 11 месяцев назад
just like my pontiac G5 . WHen creaking sounds going over bumps - likely LCA bushing? I don't see obvious loose parts on the ground.
@jimmartell3813
@jimmartell3813 2 года назад
It don't look like you pust the bracket on correct on the front bolt that holds the control arm to the frame the bolt was not seated.
@rubenmina1154
@rubenmina1154 3 года назад
This is the most detailed video ever for replacing the lower control arm. Great work guys. I am just wondering what are the tork specifications. Please let me know.
@TheAntz29
@TheAntz29 3 года назад
what is the exact parts number of left lower arm in Adelco brand? Thanks for the answers
@juangonzales1731
@juangonzales1731 2 года назад
How would I how if my 2009 cobalt LT has control arms with the sport appearance package or not
@simonriddick
@simonriddick 3 года назад
I will have to do this on my 2008 SS they've been nocking for a long time.
@Cjtheboss
@Cjtheboss 6 месяцев назад
What are the trogue specs
@harrywillisdick8660
@harrywillisdick8660 5 лет назад
The busing bolt it stuck and won't come out I unscrew the bolt about 99% but it but come out.
@RatiousMax
@RatiousMax 3 года назад
Hey man just wanted to say thanks for the great video this saved me a bunch of money and time since I live 2-3 hours from the closest auto garage, great video :) keep up with the great content.
@jackstraw5527
@jackstraw5527 3 года назад
Did you do both sides? I did the passenger side yesterday and it went fine, but the rear bushing on the drivers side seems completely unaccessible to the nut
@GabrielAutoTech
@GabrielAutoTech 3 года назад
Glad I could help
@ciphercode2298
@ciphercode2298 3 года назад
Good video,slot of commercials
@michaeltraenkner348
@michaeltraenkner348 5 лет назад
The kit comes with a grease fitting. I'm not seeing where this should be used?
@GabrielAutoTech
@GabrielAutoTech 5 лет назад
Some ball joints are sealed, so don't worry.
@michaeltraenkner348
@michaeltraenkner348 5 лет назад
@@GabrielAutoTech I appreciate the feedback. Seems there was a cap on the port, but I'm glad I kept asking questions.
@fockwulf1
@fockwulf1 5 лет назад
8:50 You can see it sticking out from under the joint. I dont know of a sealed joint on any year or make of cobalt
@michaeltraenkner348
@michaeltraenkner348 5 лет назад
Ended up being a cap I didn't see. Good news when he took for inspection shortly after, they completed the job.
@michaeltraenkner348
@michaeltraenkner348 5 лет назад
@@fockwulf1 that I believe is the upper
@rumbletumblestumble
@rumbletumblestumble 2 года назад
i can tell that car is not from michigan.....you would be dropping that cradle to get that subframe bolt out....
@chancesmall7026
@chancesmall7026 3 года назад
How you not stripping bolts just ripping them out and hammering them lol
@jimmartell3813
@jimmartell3813 2 года назад
he put a new bolt in that holds the ball joint.
@1cooksnmrcs
@1cooksnmrcs 3 года назад
Why? Did the Lower Control Arm needed to be replaced? What was the matter?
@bakedveal2624
@bakedveal2624 3 года назад
Control arm itself was probably fine. But it's usually easier than replacing the bushings or ball joint separately. Bushings need pressed in/out and the ball joint rivets need ground/drilled/chiseled out. Fully loaded control arms are cheap enough and quick.
@1cooksnmrcs
@1cooksnmrcs 3 года назад
@@bakedveal2624 Was the a steering problem? or car shaking while driving?
@bakedveal2624
@bakedveal2624 3 года назад
@@1cooksnmrcs Shaking and popping is more likely.
@1cooksnmrcs
@1cooksnmrcs 3 года назад
@@bakedveal2624 Thank you
@JCGible
@JCGible 11 месяцев назад
Try changing one thats all rusted to hell. The bushing bolt can be a nightmare. 🤬
@sugar-maple
@sugar-maple 4 года назад
I'm working on this on a 2008 Cobalt. My problem is that the cage around the nut on top of the rear bushing is busted. Anyone have any suggestions on how to get the bolt out? I can't figure out how to get anything on that nut.
@cyhazlett4037
@cyhazlett4037 4 года назад
Daniel Fricke I just did this on my 2008 cobalt...my bolt was busted off in the cage..too get into the cage cut the plate off in front of the cage with a dremmel tool...it’s about the only tool that will fit in there. I didn’t cut out the whole cage plate I just took a corner off it so that I could get my hands in there. Then I cut off part of the nutt cage too get the old bolt & nut out...put new nutt, control arm & bolt in.
@cyhazlett4037
@cyhazlett4037 4 года назад
Daniel Fricke Mabe cut the cage plate corner off with dremmel tool then jam a flat head screw driver in there beside the nut then try un bolting the bolt.
@cyhazlett4037
@cyhazlett4037 4 года назад
Daniel Fricke you can get new bolt,nutt, nutt cage, at Chevrolet dealer parts department. That’s what I had too do.
@jackstraw5527
@jackstraw5527 4 года назад
You can get a wrench in from the back. Crawl under the car
@jackstraw5527
@jackstraw5527 3 года назад
Never mind, the drivers side is fucked it’s impossible to get to
@charleslobster3592
@charleslobster3592 5 лет назад
I was looking this up online and it says on a difficulty scale of 1-10 this is about a 7 or 8. Can anyone explain here? Looks like guy took up 4 bolts or so and the arm came out. Put the new one in and put the bolts back...im pretty amateur tbh. I’ve only ever worked on 2 cobalts and a accord. I’ve replaced a timing belt, starter, alternator, radiator. Just some basic stuff but my only guide used was RU-vid. Just trying to figure out if this is in my realm of capabilities
@billlangdon193
@billlangdon193 5 лет назад
Pretty easy if the back bolt comes out. If you bust the cover on the capsulated nut it will just spin in the frame, not fun. Also it will sease in the bushing on the same bolt. Again not fun. If either of these things happen you go from a couple hour job to a couple days. Take your time use plenty of lube a few days before you start and pray.
@scooterp7009
@scooterp7009 4 года назад
Yes, pray; definitely pray!!!
@shivur5073
@shivur5073 4 года назад
I'm looking for some tips on how to take this out when every single bolt is seized (: I'm on day 1 right now
@scooterp7009
@scooterp7009 4 года назад
Kyle, first pray for God’s grace and guidance. Next, soak them for hours or even overnight with penetrating oil. Heat them carefully with a torch on low flame. Resoak with penetrating oil again, and then try to get a big breaker bar on them and apply pressure working it in both directions, back and forth slowly increasing force until it breaks free. Then don’t forget to thank God for answering your prayer. I hope this helps, it worked for me.
@les6556
@les6556 4 года назад
@@shivur5073 Invest in some penetrating fluid and spray it generously on the bolts. I can do these in my driveway in 30 minutes per side with hand wrenches.
@israelsanchez4024
@israelsanchez4024 4 года назад
No me gustó que le cortaron al vídeo en varias partes
@GabrielAutoTech
@GabrielAutoTech 4 года назад
Es Donde youtube hace dinero, para no cobrarnos.
Далее
НУБ ИЩЕТ ЖЕНУ В GTA SAMP
22:34
Просмотров 162 тыс.
Replacing lower control arms 05-10 cobalt/g5
10:27
Просмотров 10 тыс.
SYMPTOMS OF A BAD CONTROL ARM
2:06
Просмотров 446 тыс.
Chevy Cobalt wheel bearing / hub assembly replacement
25:08
Chevy Cobalt Lost Communication With TCM Fix u0101
5:41
ЭtО LADA NIVA VIS | #ТаКоЙоБзОр
0:22
Просмотров 171 тыс.
СЛОМАЛИ ДЕФЛЕКТОРА НА BMW X5
0:32
heavy equipment
0:26
Просмотров 3,2 млн
Чуть не загорелся 😂
0:57
Просмотров 1,1 млн