Тёмный

Lowrance triple shot transducer fitting 

Cardigan Bay Fishing Adventures
Подписаться 6 тыс.
Просмотров 59 тыс.
50% 1

This is a how-to video on fitting the triple shot transducer. It came with my Lowrance Hook Reveal 7 unit. It is pretty simple and easy to fit. It has been tested and it works great. Hope you enjoy the video and hope it helps you out.
If you would wish to donate to the channel, you can do so through this link below.
I don't expect anything from anyone, but i have a had a few messages asking if people can donate which is seriously generous and appreciated. your an amazing army. Thank you for the support.
www.paypal.me/Cardiganbayfishing
Subscribe link here if you would like to subscribe. The support would be great, and highly appreciated. Thank you Dave.
ru-vid.com...
Lowrance hook reveal 7 this is not the triple shot model but gives you an idea of cost
amzn.to/3fy9H4b
Marine silicone sealant
amzn.to/3gYCrnd
Stainless steel screws be sure to get the size you want for your transom
amzn.to/32m3EfC
Stainless steel clam shell to finish off hole for wiring
amzn.to/2OsSnSA
If this video is help please consider subscribing to my channel thank you
music
ru-vid.com?q=ht...

Хобби

Опубликовано:

 

16 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@anthony_8122
@anthony_8122 3 года назад
hey man i like your vids, i just installed lowrance hook reveal 9with the tripleshot transducer bloody awsome unit bud
@C3BFA
@C3BFA 3 года назад
That's wicked I bet that screen looks huge the 7 looks big It really is a great I'm hoping this year to do a follow up vid of it on the boat showing how it reads etc
@nelsoncruck2458
@nelsoncruck2458 2 года назад
@@C3BFA still like it?
@C3BFA
@C3BFA 2 года назад
Yes it's a very good unit I think
@nelsoncruck2458
@nelsoncruck2458 2 года назад
@@C3BFA Hi some people said the transducer too long and easy to get damaged… in my case, my motor will also block part of the transducer although there should be still 2 feet clearance…. Any advice? Thanks? Trying to decide between reveal and garmin 7sv….. thanks
@C3BFA
@C3BFA 2 года назад
I found it ok on my boat and it's only 4ft wide. I have never used any other units but lowrance so can't comment sorry
@twotoned2774
@twotoned2774 2 года назад
Great video. I am glad you showed how to keep the transducer in the storage state to reduce the tension on the wire. My transducer is being delivered today and this video showed me everything I needed to know. Thanks.
@C3BFA
@C3BFA 2 года назад
I'm glad you found the video useful. If you have any issues drop a comment here I will do my best to help
@turgidterror1352
@turgidterror1352 2 года назад
Perfect video, thank you. Just finished installing my own Hook Reveal 7 Tripleshot with your help.
@C3BFA
@C3BFA 2 года назад
That's brilliant I'm glad it helped
@bizzo1896
@bizzo1896 2 года назад
Nice work mate! Really helpful thanks
@C3BFA
@C3BFA 2 года назад
No worries Sean I'm glad it helped thanks for your comment I really appreciate it
@bowhunter182
@bowhunter182 Год назад
One of the best videos on the install of the tripple shot transducer mounting. I know the instructions do say to split the difference in mounting it. I also watched a lowrance video and they said to keep the bottom of th÷ transducer flush to the bottom of the boat.. I guess you have to see what way works best! Thanks for a great video...
@C3BFA
@C3BFA Год назад
Thank you bow hunter I appreciate it. Yes your right every hull design is different mine worked spot on in this position it would still pick up the bottom doing 12 knots it did break up a bit after 12 knots. But make sure you leave room for adjusting up and down on the screws and don't glue it till it's set spot on
@shauncarling8464
@shauncarling8464 Год назад
Good instructional video, mate!
@C3BFA
@C3BFA Год назад
Thank you Shaun i appreciate it
@billmcquack3552
@billmcquack3552 3 года назад
thanks for this video, im currently doing mine >.
@C3BFA
@C3BFA 3 года назад
No worries Bill thank you for watching
@johnevans382
@johnevans382 3 года назад
What length is your boat ? Nice boat ideal size better launching it every time I had mine on mooring in cemaes bay and got engine stolen enjoying your channel just found it best wishes to you john
@C3BFA
@C3BFA 3 года назад
It's 15ft John thank you for your support I hope you enjoy the channel
@arciefan
@arciefan 3 года назад
Very nice video sir. I would encourage also for those looking for a transducer mount that is not only strong, but protects the weak portion of the transducer around the pivot area to check out Ry Tek Marine's video on you tube. I just got mine today.
@C3BFA
@C3BFA 3 года назад
Thank you it's been great and even reads at speed once the lockdowns are over I will be doing an updated video wanted to use it for a while to be sure but it's spot on
@ohpleasenotthesandal3139
@ohpleasenotthesandal3139 3 года назад
Hey man, I hit a stump a while back and it grazed my transducer, and ever since then my sidescan has one side that is just a bunch of random waves and my chirp sonar just has a big red screen, and it’s not showing any depth. I’ve replaced the transducer, performed a hard and soft reset and it’s still doing the same thing. If you know what might be wrong with it, any insight would be amazing thanks man.
@C3BFA
@C3BFA 3 года назад
I don't have a clue victor. If it's a new one it should work fine it dont make sense
@klukzgaraze
@klukzgaraze 7 месяцев назад
Hi man, nice vid! Ive made something like you yesterday, but now Iam thinking.. Iam using a 5hp engine, wont there be a problem with the sideview? Its next to it, so I hope, there wont be a shade, or something.. Didnt you have had some issues? (if you are using a gas engine). Thanks!
@C3BFA
@C3BFA 7 месяцев назад
Side scan works like a torch beam it's not 180 degrees so you should be OK. Yes mine had a gas engine
@klukzgaraze
@klukzgaraze 7 месяцев назад
@@C3BFA Allright, thank you 😊
@C3BFA
@C3BFA 7 месяцев назад
@klukzgaraze no worries
@wouterdijkman98
@wouterdijkman98 2 года назад
wil the motor not be in the way for the side scan?
@C3BFA
@C3BFA 2 года назад
No it's all fine used it loads. Actually sold this boat now I'm rebuilding a boat it's bigger and better
@sandyschaefer4948
@sandyschaefer4948 3 года назад
Our new Hook 7TS keeps saying on Sonar screen “STOPPED” Then again it says “Transducer Not Detected”. What could be the problem?
@C3BFA
@C3BFA 3 года назад
Hard to say is it in warranty ? Could be a bad connection / bent pin Or faulty transducer
@shirleyann3344
@shirleyann3344 3 года назад
Ours was doing the same thing. My step son found in some comments on some video someone said to make sure your cords on the back of the unit are pushed in super hard! That took care of it!
@C3BFA
@C3BFA 3 года назад
Thanks for your input Shirley
@Fishwish
@Fishwish 3 года назад
Ha ha my transducer install vid got about 100 views and that was that
@C3BFA
@C3BFA 3 года назад
No Idea why I'm getting so many views the channel is only small
@mattsmith6108
@mattsmith6108 3 года назад
Nice. Can you add a link to those wire brackets for me mate? I could do with a pack of those
@C3BFA
@C3BFA 3 года назад
I will do later Matt I'm about to heard out fishing and going live first time in three months due to lockdowns I'm about to leave now live around 6pm
@mattsmith6108
@mattsmith6108 3 года назад
@@C3BFA nice mate ill make sure I check it out. Are you doing it with the fish finder? Exciting
@C3BFA
@C3BFA 3 года назад
No shore fishing for coddling
@mattsmith6108
@mattsmith6108 3 года назад
@@C3BFA ah. Good luck pal
@JH-jb9gj
@JH-jb9gj 3 месяца назад
Are you sure it should be movable?
@C3BFA
@C3BFA 3 месяца назад
Yes. If you was to hit anything it will lift rather than snap
@patriotFPS
@patriotFPS 2 года назад
why not just take the cable over the transom rather than through it, it's just another avenue for transom rot.
@C3BFA
@C3BFA 2 года назад
You could do that but it's liable to damage being over the gunnel.
@patriotFPS
@patriotFPS 2 года назад
@@C3BFA I have never had issues. Id rather replace a cord than a transom.
@C3BFA
@C3BFA 2 года назад
I wouldn't risk it myself. I'm rebuilding a boat transom now and I will be putting wire through this transom Aswel and I feel it looks neater
@C3BFA
@C3BFA 2 года назад
Also no matter what you do there's holes put in the transom so one more small hole isn't going to make it rot any faster than it is already
@patriotFPS
@patriotFPS 2 года назад
@@C3BFA I fibreglassed a 1" glass panel on my 233 formula so I don't put holes in the transom.
Далее
СМОТРИМ YOUTUBE В МАЙНКРАФТЕ
00:34
Просмотров 977 тыс.
Fitting Your Transducer to Read at Speed
9:48
Просмотров 569 тыс.
Sonar Setup - Lowrance Hook Reveal Series Pt 2
18:53
Просмотров 111 тыс.
Lowrance Hook2 7 Triple shot  Installation video.
15:56
Просмотров 176 тыс.
The RIGHT Way to Install a Side Imaging Transducer
22:32