LSE90.com BMW LS swap Tutorial - Part 1

Подписаться 7 тыс.

Просмотров 98 тыс.

50% 1

In the first video of this series we meet up with Michael Page, owner of www.LSE90.com as he walks us through a complete LS swap in a 2006 E90 BMW utilizing his mount system and a Holley Terminator X setup!
Common Terminator kits for the swap and GM Throttle body
Holley Terminator DBW with trans control - amzn.to/3ms9GmA
Holley Terminator DBW for manual trans - amzn.to/3uuPjs4
6 Pin GM DBW TB - amzn.to/2R4Ni7g
Split loom brand we use - amzn.to/2PGHxfN
walbro 450 pumps - amzn.to/3rWVUK6
fuel line kits - amzn.to/3fUj5Cx
Threaded IAT sensor - amzn.to/3dK9X0k
Fbody Water Pump - amzn.to/3uCcEYL
thermostat housing - amzn.to/39Xp4CL
Fbody a/c compressor - amzn.to/3fX6deI
Fbody a/c manifold - amzn.to/3uy8wJ6
T56 Slave adapter to AN - bit.ly/2PQx9lJ
Everything filmed on this GoPro
gopro camera - amzn.to/3g166Px
External Mic - amzn.to/3d2eZGm
GoPro Mic Adapter - amzn.to/3dILsk4
Music Used:
Music by Joakim Karud / joakimkarud
NCS: Music Without Limitations
NCS Spotify: spoti.fi/NCS
Free Download / Stream: ncs.io/ark
Ship Wrek & Zookeepers - Ark [NCS Release]

Авто/Мото

Опубликовано:

22 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 330

@Genesislights 3 года назад

You guys make it look easy like Sunday morning ...my goodness.

@e85johnson68 3 года назад

I see buying a cheap 3 series in my future and doing this! Thanks for the video!

@bigbird2240 6 месяцев назад

Love that you are saving and making these old cars good again

@MeezusChrist 4 года назад

glad i found this, im saving up to do this to my e36 right now

@SloppyMechanics 4 года назад

Nice work mike thanks for all the tips!

@rallyroad3369 3 года назад

Hey! I just bought your Terminator X Max flex fuel harness for my E90 M3 LS3 swap. Looking forward to getting that set up. Keep up the great work.

@hekthic 3 года назад

I have the same car and I think I'm going to do this now as my project car!

@JoeSmith-zg7in 3 года назад

Wow that was quick.great job.

@Sumayyahguest 4 года назад

great video and I'm so glad you guys are doing this. I would love to put an LS into a 1 series.

@straightsideways4834 3 года назад

I want to do that to my 1 series too but I’m concerned about the weight distribution. Do you know what it will be after the ls swap? I love the 50/50 rn

@Hennysgarage 2 года назад

@@straightsideways4834 look up the weight difference in the engines. It’s not that much.

@iEffecthegame 2 года назад

@@straightsideways4834 if it’s an aluminum block with a t56/tr6060 it’s about 20-30 more pounds than an N54 manual car

@Darkeiser.7 4 года назад

I MUST do this!

@NeunundSechzig1 4 года назад

Great Video Greetings from Germany

@sofuzzywuzzy 4 года назад

Need to remember to watch this series for my E61. I'm sure there's a bit that'll overlap.

@Darkeiser.7 3 года назад

Got my car home today! Starting to tear it down! I'm planning on doing pretty much the same 6.0 but with the 799 heads.

@riley42945 2 года назад

hey how did it go starting the process today

@hughmongous6613 3 года назад

From the day I got my e60 I've wanted to do a ls3 swap. But so far I haven't seen any that maintain all the factory features. One day! That has been my dream since 2008.....😔

@adrenaline4life233 3 года назад

I love these cars. Drove an 06 BMW 325i for a year and want another. They're cheap, so if I could buy one and then get an LS Swap, that would be sick. I love V8's too so I'd get the best of both worlds

@alanpaulick7815 Год назад

Well done guy's

@ItsJoebie 7 месяцев назад

Wow, you got me daydreaming about finding an M3 with a blown motor and doing some sort of turbo LS swap... thatd be insane, you make it look so easy! I've got a 2011 328i that ive replaced the engine in (replaced blown N52 with a junkyard N52) so i know my way around the e9x like kinda decently. Such a solid platform! Great videos, very educational, thank you.

@lse90garage 7 месяцев назад

Go for it! So many guys have completed this swap in the driveway or garage with minimal issues.

@007-K2 7 месяцев назад

I have 07 328i and have just recently also started day dreaming about ls3 swapping it..Senior in Highschool BTW..got big dreams for 2024..Hope u get that swapped soon💯

@jakfrost6764 7 месяцев назад

@@007-K2I’m class of 23 graduated I plan on doing this also in 2024 what’s your Instagram

@jassom1270 6 месяцев назад

How much did the new engine run you?

@ItsJoebie 6 месяцев назад

@@jassom1270 it was years ago but i think it was like $2k for a motor with 80k miles.

@Dat550go 3 года назад

Thank you my guy. You just revived a dream of mines. Quick question tho: is the process the same if I were to do this to a 07' 335i coupe?

@lse90garage 3 года назад

Yep almost identical!

@elijahboles2963 3 года назад

Aye man big fan of your channel and I was just tryna get a hold of you to see if we could partner up and see about doing an ls swap in my 2006 bmw e90 325i

@lse90garage 3 года назад

email me sales@lse90.com

@nilotheking 4 года назад

fucking finally!!!!!!!!!!! been searching lse90.com on youtube every other week for a while now

@bobbywarrior1434 5 месяцев назад

Hello Mike amaxing swap, question can you keep the original automatic transmission that comes with the e90 , 328i , do you need extra modules o programming, thanks

@jesusnieto6911 2 года назад

How did you get fuel to the motor? Or how did you connect the stock tube to the ls fuel rail

@oggeracing2015 3 года назад

Did you manage to get the ac compressor working ?

@e60stevan Год назад

any different in the e60? if not would a e60 guide be possible soon? also. for terminator x max, if im going from auto to manual do i need to buy the transmission option for x max? without the transmission options you save a few hundred so im wondering if manual swap will involve having to spend more for a transmission optioned x max.???????

@allanturner6219 2 года назад

Hey bud I'm wanting to swap my 2011 328i e90 with you kit just want to make sure it'll work

@anthonylee9924 3 года назад

I have a 2011 335i I tried finding the wiring on newtis. Looking at ordering you kit and doing it to my car. The motor just blew up in mine.

@e85johnson68 3 года назад

You should film the process if you do. I have a 335 as well, I probably would never LS swap it, but buying a cheap 3 series and making a drag/street car would be really fun. For my 335, I've always wanted to M series motor swap with a supercharger, I think it would make a great combo.

@anthonylee9924 3 года назад

E85Johnson I plan on trying to filming it. I was thinking about buy a built n55 for my car but and LS motor can hold more power than a n55 block can. The most anybody has really got out of an n55 was around 900whp and that is not going to last long.

@josephellison4484 11 месяцев назад

I would like you ask you do a doing a LS swap to 04bmw 530i what the first thing do first or if I can even later in it first doing anything of this just would like to get sum ideas

@cookumtwo3901 3 месяца назад

Wonder how much different this would be compared to an e70 swap 🔥 I’m kinda interested

@bryanattinson4546 4 года назад

Hello, did you mention what you did regarding the fuel system in any of your videos, i watched them all and i May have missed it. Currently doing the swap myself

@lse90garage 4 года назад

Bryan part 4 covers the entire fuel system upgrades Mike and Frank did. Enjoy!

@21lokko 3 месяца назад

I have the same car. This is the eventual plan.

@isaacplaysguitar5269 Год назад

would this swap work on a 330i of the same year? I know the intakes are different so is there any sort of wiring i’d have to do? Just curious.

@sors1599 3 года назад

I got a 2006 330xi that I bought back in 2012 and it’s been garaged for the last 5 yrs I sometimes think about selling it but after seeing it I always Chang my mind I think I would really enjoy it if I had this swap how much does a swap like this cost I’m located in AZ

@notadoctor2598 10 месяцев назад

$1000 plus a donor engine/transmission plus labor.

@aaronthemartialmechanic893 2 года назад

With the Camaro t56 is the stock location for the shifter ok or can it be relocated to the front

@anvldiy28 Год назад

what did you mean by the windshield wiper issue? I just bought a manual swapped Z4 and the auto harness is still in there. is there something I should terminate together to get my windshield wipers working correctly?

@justinstandafer-rd6yk 2 месяца назад

U guys make mounts for 2007 bmw 530xi for ls swap with 4l80 transmission.

@Saltygarage 3 года назад

When will the CAN conversion box be available on the site ? Did you end up getting the cluster to work

@lse90garage 3 года назад

Can Boxes are being produced right now, they’ll be available end of this month/beginning of next. We will announce when they’re available.

@zacharypowell5574 2 года назад

Have you guys tackled any e46 swaps?

@joepaquette7435 3 года назад

How did Franks motor do on the factory BMW fuel system while NA? I wont be boosting mine and should only be around the 450 hp range. Just looking at some cost cutting if possible. Would a 335 pump system be a sure thing for plug n play if I have to bump it up?

@lse90garage 3 года назад

It was fired up on the stock pump but never driven hard on it, he swapped in the radium setup with a single 450, when he went turbo he wired the second pump.

@f32msprt4 Год назад

Quick question What should I get to swap into my 435i?

@fatkat311 Год назад

Any of you watching installed the 4L80? I’m assuming the shifter solenoid that allows you to put the car in gear would need a 12 V signal from the brake switch? Is the shift solenoid wire found in the DME box? I haven’t purchased a subscription to new tis yet. I figured somebody watching has done this.

@lse90garage Год назад

Email us at hangmanenterprises@gmail.com We have a schematic for adding a relay that lets it work properly but I can’t share it here

@djjerzy609 2 года назад

Does the drive by wire wiring from the bmw work the same if using a stock LM7 ecu and harness?

@lse90garage 2 года назад

No it is not. we highly encourage ppl not to use a stock GM harness. Everything is based around a Holley Efi

@gtojohnny3242 2 года назад

I've done a few LS swaps now but never a BMW, going to LS swap my wife's 06 bmw 325xi and Ill be ditching the AWD system and converting to rwd only with the swap but my question is would the mounts from the video work on a XI or will I need XI specific mounts?

@lse90garage 2 года назад

Www.lse90.com offers x drive specific mounts, so no issues swapping those cars.

@user-mq7mm3fy6i 3 года назад

Great tutorial If i want to start a project What will be my best car to start with? The 318/320 are cheaper then the 325 Is there much of a different regarding the swap?

@E9X330 2 года назад

Not really, but a 325/330 will have better suspension and brakes stock

@aombarbor 7 месяцев назад

Link for Holley is broken can i get a new one with manual trans please

@dontellsmith7890 4 года назад

Hey brother, I’m in San Antonio and I have a F10 550i, I want to Lt swap it

@TeyronP 2 года назад

Just joined the fb group and subscribed to the channel. How much more difficult is it with a 6MT, N54 xdrive?! I’m assuming I toss the front axles out?

@lse90garage 2 года назад

You disassemble the axles and leave the stubs in the spindle. Mike sells xdrive specific mounts.

@TeyronP 2 года назад

@@lse90garage Thank you! looking to transform my engine bay asap! My n54 got 165k on it don't see it lasting much longer!

@Supramax82 Год назад

What type of LS motor did you use? Thanks from Norway 🙂

@zackarybentley2217 4 года назад

I know I didn’t hear anything about it in the videos or maybe you just forgot to mention, did y’all have to cut/ shave the firewall or the transmission wall?

@lse90garage 4 года назад

With the T56 or TR6060 you don’t have to, if you run a 4l80 you’ll need to do some cutting or hammer some clearance into the tunnel mainly for the connector on the trans. So far with the glide it looks like minor massaging so that we have more room for the linkage connection.

@joepaquette7435 3 года назад

Anyone heard of fitting a "shaved" truck intake manifold under a stock e92 hood? I'm in the parts collection phase, and would like to use as many parts from the doner as possible. Thanks folks.

@lse90garage 3 года назад

Fits under the M3 hood, doesn’t fit under the stock one

@lucianosenisi4323 3 года назад

Would the can conversion box you mentioned work for other engine swaps

@lse90garage 3 года назад

it is setup to get the data from a holley, so any holley controlled engine yes

@socomsfinest1184 Год назад

Can this be done to a 2010 bmw 328i ? Also how much do you think it will all cost for me minus the price of the car. Thank you. I also want to say I would love to see the entire build when it's completely done.

@lse90garage Год назад

Watch the other videos, we cover both questions

@tilescape 4 года назад

I've been thinking of doing this on my E60 - do you happen to know if your kit will work? Thanks!

@brianrodriguez4100 Год назад

Lmk if you’ve found anything I have e60 been looking into buying all parts don’t know what engine or anything to do😅pretty new to ls engines

@tilescape Год назад

@@brianrodriguez4100 These guys just released a engine/trans mount kit for the E60 platform… check out their website for more details. Mine arrived last week… haven’t dove into it yet. Michael Page is the man, he developed the kit. Good luck!

@gas_burner_garage.5242 2 года назад

I have 2008 /328i /E90 and I’m very curious on where did y’all get the motor mount brackets from ???????

@lse90garage 2 года назад

We make them bud. www.lse90.com

@layne335is9 Год назад

Where are you guys located? I have a 2012 335is with DCT I want to do this to. I have a 6.0 motor already.

@linden203 4 года назад

I want to do this with my f30 335, but I want a boosted ls. Is there any way fo maintain the stock zf?

@CompBuilt 4 года назад

What’s your ig man I want to do the same thing with mine.

@LawBreakerGaming 6 месяцев назад

my 06 325i doesnt start got me strongly considering this

@lse90garage 6 месяцев назад

Do it brother!

@Ginajenns 4 года назад

😎

@wilsullivan4036 4 года назад

Can y'all put the link to the wiring in the description?

@lse90garage 4 года назад

Wil Sullivan www.newtis.info/

@ssdwired3163 2 года назад

I'm stuck at guibo for a 330i 2006. Otherwise, I'd buy your parts now. secondly, I need this street legal.

@brandonclary5474 3 года назад

Which terminator did you get was looking on holleys website and there was like 6 to choose from?

@rallyroad3369 3 года назад

It depends on which LS you start with, which injectors you are using, and if you need DBW or Transmission controls.

@Leekautorepair 2 года назад

I have a throttle cable setup. What setup should I go with for the drive by wire

@lse90garage 2 года назад

You should remove it and use the bmw DBW pedal and a Holley lol.

@jgazda9742 3 года назад

one day i will LS swap a bmw

@randymarrero8331 3 года назад

Looking to do the swap on a e60

@coooooool12342 3 года назад

Open towed shoes in the shop is risky business haha.

@lse90garage 3 года назад

coooooool12342 shhhhh...OSHA Would have a field day with us.

@chriswahl6249 3 года назад

If I am using a th400 I can totally skip the wiring for the clutch switch trickery, right?

@diduck6878 3 года назад

Need wireing for passing gear

@FStan-co8vv 4 года назад

Would those engine mounts work if the base car is a manual 6 cylinder diesel (which has a very strong gearbox afaik) and the LS is mated to the original gearbox with an adapter kit (running on a standalone ofc)? I doubt it but hope dies last. Also, I understand that if I run the car on 2 ecus I can keep the standard features of the car (air conditioning and stuff), is that right? Thanks!

@lse90garage 4 года назад

The simplicity of a full gm drivetrain is a lot of the benefit of this swap. You can check on real oem to see if the subframe is the same and compatible with the mounts.

@FStan-co8vv 4 года назад

@@lse90garage If I were to use a TR6060, would that require a custom driveshaft?

@lse90garage 4 года назад

Watch all 3 videos we’ve posted first, so far the questions you’re asking are directly covered in the series. If you have questions after video 3, feel free to ask. Thanks.

@FStan-co8vv 4 года назад

@@lse90garage All right, I'll watch the rest of the videos.

@user-vx9pi7pr3q 11 месяцев назад

What cluch plate i need for my 2007 e90 n52 moteur whti 6 seppd gearbox

@VRRich 3 года назад

Is this possible using a stock gen 3 harness without having to purchase a terminator setup .

@lse90garage 3 года назад

If you build a manual pedal or make stock dbw stuff work, buy a pwm module for making the bmw fan work. Terminator is 100% worth the additional cost.

@em2attic 4 месяца назад

My concern is would all the wiring stuff work on a M3 to keep all the oem stuff working as it should just like on your Non-M setups?

@lse90garage 4 месяца назад

Few people have swapped M chassis cars, yes. Mike offers M3 mounts as well

@em2attic 4 месяца назад

@@lse90garage bet, i like the sound of that!!!

@gabrieldewraj3502 3 года назад

Are these e90 swap principles also applicable to the e92?

@lse90garage 3 года назад

Yes, almost identical

@davidw4278 3 года назад

Best part of the video starts at 14:00

@dr.prince9664 3 года назад

how much would something like this cost from buying all the parts and a new engine and labor for getting it put it

@lse90garage 3 года назад

collin Duffey around $13,000 parts and labor.

@favoritos721 Год назад

Where did you buy the motor mounts?

@lse90garage Год назад

www.lse90.com

@elevatedperformance 3 года назад

How is it doing on a e90 M3 ?

@AlecTheStar 4 года назад

Will the swap kit work with a right sided drive

@lse90garage 4 года назад

For any questions regarding Mike's system please email hangmanenterprises@gmail.com and he'll get back with you as soon as possible.

@DAWNMOWER Месяц назад

Is it possible to do this with a 320i?

@jfboosted 3 года назад

how would fueling work? You still run the same fuelpumps that are in the car?

@lse90garage 3 года назад

Covered in the next parts of the series, you have a few options depending on your hp level

@jfboosted 3 года назад

@@lse90garage I also emailed you about the LS motor mounts I was wondering if I can use the ls motor mounts with an adapterplate to mount it onto the Gs6-53bz bmw manual transmission

@E92_pandemwidebody 3 месяца назад

I have a l86 6.2 building at this moment to put in my e90 just want to know if the same starter will work for mine ??

@lse90garage 3 месяца назад

Gen 5 starter is basically the same as the short LS starter and will clear fine. They are interchangeable

@E92_pandemwidebody 3 месяца назад

@@lse90garage thank you 🙏

@E92_pandemwidebody 3 месяца назад

You know where I can get the bracket for the AC compressor ?

@305tyrone4 3 года назад

Would this work for the 2008 bmw 328i?

@lse90garage 3 года назад

Yes

@younggeli6829 3 года назад

I need sum tips on swapping a LS in my E92 any body got any tips ? Got the car for stupid cheap and wanna do something crazy on it

@lse90garage 3 года назад

Whole series here bro, that walks you through it, not sure what other tips you might be referring to. Let us know

@hustlementality8292 3 года назад

How much does something like this cost i just bought a 328xi 2008 with 100,000 thinking of a Ls swap but not sure what direction to go

@lse90garage 3 года назад

Checkout our cost breakdown video on our channel

@Alex_Brown97 4 года назад

How much of a difference does it make if its a 328XI vs 328I

@lse90garage 4 года назад

If you have an x drive car the front subframe is different

@GamingWitRad 2 года назад

How much would this cost for you guys to do? Parts and labor in 2011 328i sport

@lse90garage 2 года назад

We tell everyone to expect around 10-15k in parts and labor depending on engine and trans selection, we are currently doing a E91 wagon with a 6.2 LS3 and T56 that is coming in around $16,500 total.

@kevincarey4219 4 года назад

Hello Matt I was wondering if your can bus converter would work for a e38 swap thanks .

@lse90garage 4 года назад

E38 PCM?

@kevincarey4219 4 года назад

@@lse90garageSorry a e38 ls swap will it work for me to get gauges to work

@lse90garage 4 года назад

Mike will have to chime in but I’m almost certain his controller is specific for the E90 chassis setup, if you email us at hangmanenterprises@gmail.com he may be able to assist further

@theodorecendejas1343 Год назад

Would this be possible for a f30 335i

@SFGPUMP 11 месяцев назад

Where can I find a list of everything like EVERYTHING needed to swap my 2008 328xi? Tired of searching for all these problems on this n52

@lse90garage 11 месяцев назад

There isn’t one. Too many combinations exist for the swap. The Facebook group is a great resource to start with

@SFGPUMP 11 месяцев назад

@@lse90garage alright thanks I’ll try and find a group to join

@lse90garage 11 месяцев назад

@@SFGPUMP we have one facebook.com/groups/450961372349986/?ref=share_group_link

@pinoysi06 3 года назад

Sick swap man🔥🏎 would this be exactly the same wiring process for manual Bmw n52?

@lse90garage 3 года назад

Almost identical except no brake mod needed for the stock stater button

@soccerplaye9r 2 года назад

How much would you charge for full swap 2006 bmw 325xi n52 to a Ls swap?

@lse90garage 2 года назад

You can reach out to us Via email and we can go over specifics and pricing, hangmanenterprises@gmail.com

@toddfrazier3844 2 года назад

I just got a 2010 bmw 325i with the 3.0 and the engine is bad. I want to put a 4.8ls in it. Can you send me a web link for everything I need for the swap

@lse90garage 2 года назад

Giving you a complete list practically impossible with all the variations available for the swap. My best suggestion is to watch our cost breakdown video and make a list of the major components that you need as well as watching the tutorial videos 1-4

@moisesmaldonado5942 3 года назад

If i do the ls swap can i use my bmw 6 speed transmission .

@lse90garage 3 года назад

Yea there’s an adapter you can buy, it’s pretty pricey but doable for sure

@brandonjohnnygonzalez208 2 года назад

Did you guys use the stock rear end ?

@lse90garage 2 года назад

Yes we do, either stock with our adapter and a sonax companion flange or swap to an 8.8

@Txlonghorn017 4 года назад

What trans is he running? 6l80e?

@lse90garage 4 года назад

t56

@sors1599 3 года назад

Can anyone help me? I have a ‘06 330xi I want to swap a v8 into it I need info on what and where to buy everything I need

@warrend4245 3 года назад

Facebook has an e90 ls swap group

@7beast298 3 года назад

What exhaust manifolds did u guys use?

@lse90garage 3 года назад

gen 5 camaro/g8

@isolation2843 4 года назад

What oil pan and headers are being used?

@lse90garage 4 года назад

That information is directly covered in both videos

@applebuyer958 4 года назад

did you use stock transmission

@lse90garage 4 года назад

Stock T56 from a 98-02 fbody. It’s covered in the later videos what transmissions work.

@MrJinwright 2 года назад

Can you use a Speeduino instead of Holley?

@lse90garage 2 года назад

All of the support and products Mike offers is based off the Holley system, sure you can use other systems but there will be no support on our end, you’ll need to be knowledgable enough to work through it.

@leonmullings2550 2 года назад

Have you guys ever did a e46 swap

@lse90garage 2 года назад

Unfortunately we don’t mess with the older chassis cars, love them, but we don’t offer any products or support for them currently. Drift HQ is a great source for them.

@JaayMagnum 9 месяцев назад

Could you also do this to e90 335i ? N54?

@lse90garage 9 месяцев назад

I think so, I’d have to check…………….

@nickrutland3268 Год назад

How come you used a 6 pin TB and not an 8 pin…. Like if i was going to use a factory 8 pin one?

@jonsanchezperformance 2 года назад

Just want to confirm pin 41 from the cas needs 12v switched in order to initiate the start up sequence like normal. So to do that tap into pin 4 on the break switch and run a wire to pin 41 on the cas? For us stand alone guys

@fatkat311 Год назад

Did you ever figure this out? I’m assuming you cut pin 41 and take the wire and run it to the brake switch… At least this is the way I understand it

@jonsanchezperformance Год назад

@@fatkat311 if auto, the car just needs coding to start using the break pedal no wiring needed

@fatkat311 Год назад

@@jonsanchezperformance Which ECM are you using? I may need to do something a little different because I’m using the Terminator. I don’t see anything in the settings to allow for that kind of programming

@jonsanchezperformance Год назад

@@fatkat311 it’s through the CAS module within the car. CAS Coding.

@fatkat311 Год назад

@@jonsanchezperformance oh… got it.. makes sense..