Machining & Boring BIG Steel Tubes | Large Lathe Work

Подписаться 795 тыс.

Просмотров 872 тыс.

50% 1

This video is a job from our machining workshop to machine and bore the ends of 3 large steel tubes for a welding rotator drive plate. The steel tubes are approximately 3 metres (10’ feet) long and 325mm (13” inches) in diameter so we need to set them up in our 5 metre LZMT lathe machine. We first set up the tubes using our Tailstock chock and machine a band for the steady rest. Once the steady rest is setup we then remove material from the ID of tube end to suit the drive plate. We are using our Monkula Anti-vibration boring bar and will also be machining and facing down the tube ends to customers spec.
In this video we are using:
- LZMT CW6280D Lathe
- Monkula M6D-50-400-40 Anti-vibration bar
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
Song: Any Sign by Hunting for Sunsets
#australianmachinist #machineshop #machinist

Наука

Опубликовано:

15 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 945

@CuttingEdgeEngineering 3 года назад

Hey viewers thanks for watching todays video from our workshop! It was great to have a job that wasn't f*cking munted 😂 p.s. Our LIMITED COLLECTION hats & stubby coolers are back in stock. Grabs yours before they're gone again 😎👍 Official CEE Merch shop: www.ceeshop.com.au Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/

@timothyball3144 3 года назад

So this comment was posted two days before the video went live. I assume that means that the giggler had it edited and ready to go live on Wednesday? Sounds like a smart plan. No rushing at the last minute. You guys are doing RU-vid right.

@bronco1786 3 года назад

What kind of metal/tubing is that? It has a real loud "ring" to it when the chips are bouncing around inside when its turning... makes me think its some pretty hard stuff. ?

@statewidetfd4107 3 года назад

I think it's quite obvious on what you're making. Each of those pipes have the right diameter to fit inside each other

@kindablue1959 3 года назад

US'er here, had to look up 'munted'. Another thing I can call someone and most won't know I'm insulting them. lol

@mikesch7672 3 года назад

Love your channel and content. Was just curious if you'd like to see an 85' lathe with a chuck at both ends and 55' between the chucks. We have a family shop here in the states and bought the lathe back in the early 90's. Have some short videos turning hydraulic cylinder barrels for a customer. Want to say the cylinder barrel was about 60" Dia and 12 or 14 feet long.

@der8auer 3 года назад

This turned into on of my favorite channels lately. Very interested and fascinating stuff!

@CuttingEdgeEngineering 3 года назад

Hey mate thanks for the comment glad the vids are being enjoyed 😎👍

@stevenr8606 3 года назад

Dam Carl you're fast replying. Let Kurtis say something first. Oh I see, you're out of BEER again!

@Robinjo1o1 2 года назад

Mit dir hätte ich jetzt hier nicht gerechnet. Grüße

@shud259 2 года назад

Hi Roman :) grüsse aus der Schweiz *wave* war total überrascht dich hier zu sehen 😎

@Realtime1501 2 года назад

@@CuttingEdgeEngineering do you realise who this actually is Karen?

@nospin1394 3 года назад

Today’s video is the perfect example of what I’d like to ask because it showed some of the different sizes, shapes and colors that come off the lathe and it’s fascinating. Have you ever thought of putting the different castoffs in like a mason jar, put your logo on it, make it worth your time to sell and put it on a limited run in your store. Hell start with just two or three if anything? Its something tangible that you’ve worked on and that pretty cool. You have a good core viewership. Food for thought I know there’s a million other things to do. Cheers.

@TomokosEnterprize 3 года назад

I was working at a pulp mill in Northern BC. They recognized my machining love and soon had me regrinding the many outfeed roles. I believe they were 12 x 240 inch. Kind of a boring affair as once the setup was done there were uncountable hours watching the big lathe with the only changeups were to dress the stone once in a while. I was never allowed to sit down as well. It eventually drove me to going over to one of the 3 sawmills on site where I became a millwright. I had my papers by the time I was 19 and soon bored with that I joined the Canadian Navy. Lots of changeups as a Marine Engineer there eh. It is great to see you working with that new long bed lathe. I just plain love it eh ! You know how much I love big and hey my friend that boring bar is to die for, LOL. This one was great so I am off to see the sawmill roller and broaching. No better way to say goodbye to another week, eh my friend. See ya there bud.

@allisongahan159 2 года назад

Hello from John Gahan in Dublin Ireland. I am an 87 year old engineer with a start up story just like yours! Love watching all your videos!! 🇮🇪🇮🇪🇮🇪🇮🇪

@bruceintas 6 месяцев назад

Good on you John. Hope you still enjoy a wee nip of Tullamore Dew!

@dermozart80 3 года назад

It's Friday and my most favorite show is on! AWESOOME. Gonna grab a fresh coffee (in my CEE mug ofc) and then on to CEE. Have a nice weekend everybody!

@CuttingEdgeEngineering 3 года назад

Cheers mate enjoy that coffee and your Friday over there 😎👍☕

@awesome-iz6xb 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kfVsfOSbJY0.html 🤣🤣🤣🤣

@humancattoy7767 3 года назад

Thoroughly enjoyed every moment. The video quality is outstanding and the audio is clear.

@CuttingEdgeEngineering 3 года назад

Great feedback thanks mate!

@sidimahtar8237 2 года назад

صور لي ما خراطان❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️💘❤️❤️💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘💘

@rodfair5698 3 года назад

Karen, Kurtis, just wanted to say how much I enjoy your videos. They are extremely well made, easy to watch and easy to understand. Please keep them coming. Thanks again, Sincerely, Rod.

@CuttingEdgeEngineering 3 года назад

Hey Rod thanks for the great comment mate we appreciate that! 😎👍

@putinkhuylo 3 года назад

The Giggler keeps upping her camera and editing skills. Way to go!

@thomasphilyaw8593 3 года назад

It's amazing how you guys have made my Fridays more special. Either I don't have a life or you guys are that good... hopefully it's the latter. Love you guys

@CuttingEdgeEngineering 3 года назад

Will agree with the latter there mate 🤣👍

@craigsmith8217 3 года назад

It never ceases to amaze me at the brilliance of our ancestors who invented these machines.

@TomokosEnterprize 2 года назад

When it comes to big the machines that made these machines are the ones I love to see.

@haydnjenkins7607 3 года назад

My dad worked at a Engineering company after leaving the Army it wasn't his passion in life, but I remember the Smell of Aqueous oil on his works cloths, he worked to feed our family but his true Calling was a Chef, he had been a Master Chef With Warrant Officer Rank, I had a time working with him in the Hotel and Catering sector but my younger year I remember that Machine shop oil smell, anytime I walk into a machine shop that smell just flashes those memories into my mind, love the shows and the Star of the show is deffo the Doogie

@rogerpinette480 2 года назад

The truth is I really like your dog.I apprenticed in Vancouver as a machinist in 1963-67 and I have a St Johns therapy dog and she is a Boxer girl. My name is Roger Pinette and my dog was the only person that was allowed to visit me when I was in hospital for 4 months with Covid 19. By the way you have nice equiptment and really know how to use it.

@MajesticDemonLord 3 года назад

Ah, now my Friday is complete

@CuttingEdgeEngineering 3 года назад

Good to see your comment

@MrHungrySimon 3 года назад

For me, friday starts with CEE

@garybooska296 3 года назад

Im always amazed at your work a young person should see you in action it might inspire them to take this up for a trade ! Thank you for showing us how these things are done!

@dtimboggs 3 года назад

I must say Thank you for taking the time to read your comments and reply back to most of them. I know that takes time that could have something else being done? Still love seeing how happy the dog always is. As with most of the commenters here, my Friday morning starts with CEE

@thomasrappen5906 3 года назад

ohh, cold on Your site? Keep healthy, and THX a lot, good start into the weekend... I love the way Karenis doint the cutting, right balance between SloMo, and compressing... GRTZ to You...

@theoneandonlyowl3764 3 года назад

It's nice to see you get some straight-forward jobs along with the munted ones. Love the vids, great work both of you... and homeless, for just being there and entertaining as well.

@terryfromsouthcarolina4601 3 года назад

Impressive as usual all around. I loved the phrase "They usually do CNC work but this is too big to their machine". Back in 1974 I had a high school councillor tell me I was wasting my time taking a machine shop class because all the manual machinists would be replaced by robots. I'll take my chances I told him. Blithering idiot. Somebody had to make the prototype first. In my area there are companies screaming for manual machinists because it just costs too much to do a limited run on a CNC. Don't get me wrong there is a place for CNC but to purchase a machine big enough to do jobs you maybe will do is way too costly. You have to get production jobs to make the payment on that machine. This is where shops like Curtis's shine. Also this is where guys like Curtis shine too. Again great job on the machine work. Beautiful camera work and editing by the giggling camera lady. Homeless you are slacking off. I only saw you destroy one thing and that was a spider web. You deserved that sneeze. LOL! Thanks for the video guys. Until next week. Cheers! Terry from South Carolina USA

@chrisb4009 2 года назад

Your school councillor was right, you’ve only got a job because we’re training about 10% of the turners / machinists we did 30 years ago. Look at the photos form the 60’s of rooms full of men in smocks stood at lathes making stuff. It’s just not a thing anymore.

@chrisforgan731 2 года назад

@@chrisb4009 that is true to a degree. but every machine shop still has a manual lathe to make unusual stuff and tools for the various machines. a local harvester manufacturer still had manual lathes for the small and intricate parts, to make spares for the other machines. as well as 3 large cnc machining centers

@steamfan7147 3 года назад

Good times Kurtis, Interchangeable head bars are cool, saves buying all those tool shanks multiple times. I do alot of bore and key jobs in the 75-200mm range with fairly tight finish requirements. I use the through coolant feature for compressed air to keep the chips pushed ahead of the cut, so they don't run back through and botch my finish.

@michaelvangundy226 3 года назад

I was waiting for the shot of opening the shop door and letting Kurtis out. Hold up a cooler. Come on, time to go home.

@anthonythacker1817 3 года назад

It’s 4am here in the states and my Friday is complete

@CuttingEdgeEngineering 3 года назад

Morning to you mate have a good Friday

@northbetrue 2 года назад

Looking over at my Chinese mini lathe 7x12 while watching this video. It’s pretty much Fisher-Price my first lathe play set! You’re a clever guy, good videos, good instructor, monster machines. Nice work and thank you for teaching me a thing or two. Seriously your chips are bigger than my headstock 😬

@pollepost 3 года назад

Nice job. Reminds me of when I was a machinist-apprentice, making huge hydraulic jacks for aircraft maintenance. The sound of the cutting edge is so nice. Have a nice weekend you guys.

@CuttingEdgeEngineering 3 года назад

Glad you could relate and enjoy it mate

@terryfromsouthcarolina4601 3 года назад

I might have used some of your jacks. I was in aircraft maintenance in the Air Force for 13 years. Those jacks have to be right! Terry from South Carolina

@matthewgrimes1093 3 года назад

The dogs sad face when its time to go back into his little room.

@CuttingEdgeEngineering 3 года назад

Poor baby wants to follow his mummy 🤣

@xobotun_ 3 года назад

Yeah, part of me screams "Let him in, let him have fun with you!", and the other part looks with astonishment at the first part and says "It's a dangerous room filled with hazardous heavy machinery. Even I wouldn't want to stay near the thing when it works." So, thanks for the dog's (and yours as well) safety!

@gorillaau 3 года назад

How did the dog get his own office?

@hughmac13 3 года назад

Yeah that was tough.

@Blackforest123456 3 года назад

@@xobotun_ the problem are those thousands of sharp metal peaces laying on the floor everywhere during the working time.

@dieselhatz4247 Год назад

Been trying to catch up on your back catalogue, and doing very well, as each video is just a superb as the last, and still improving each time. Your work on those machines Carl, I mean Curtis, is nothing less than magic, you’d be revered as a wizard once upon a time, and Karen the time, effort and patience you have is saint like, quality uploads every time, seamless, wholesome and fun(ny). Can’t forget Homeless, lovely dog, knew a Jack Russell just like him, killed everything. Thank you all, and hope things just keep getting better for you!!

@CuttingEdgeEngineering Год назад

hey mate thanks for taking time to watch our videos, glad they are being enjoyed 😎👊

@ianmacpherson2409 2 года назад

Hey. Last night I was watching a guy who does machine work in Yorkshire England. He does trepaning on exotic round metal. His methods might look old fashioned, but a treat to watch. I found him by accident as I was surfing the net.

@garyjcsizmar4636 3 года назад

I love watching your videos and your puppy! I. Spent 45 years as a. Machinist and 20 of that was in the Marine Corp keeping everything from AC in the to trucks operational. Spent the last 25 years at a AC Depot. I am a convenient Mach operator at heart but loved CNC! We used a Cad Program called GIBBS just for on the floor programming. I love your set ups and just watching answers a lot of questions on how to do! Your videos bring back a lot of memories of many moments in my life.

@cali_nerd9122 3 года назад

Had to stay up just to watch this when I saw you were using the bigger lathe. Have waited for this Friday in more suspense than before lol. Thanks for sharing m8 I miss this.

@CuttingEdgeEngineering 3 года назад

Mate thats dedication thanks for waiting and watching

@gorillaau 3 года назад

He missed the opportunity to say Maybe we are gonna need a bigger lathe. :-)

@cali_nerd9122 3 года назад

@@gorillaau I was excited for the episode and thought maybe he’ll need a bigger lathe. Great minds think alike lol. Yes such a shame he missed on that opportunity lol.

@ChristophLehner 3 года назад

love the outtakes, at least i am not the only one, who has troubles forming a complete sentence in front of a camera :) great work as usual

@DirtForester 3 года назад

Friday morning, 5 am. Cup of coffee and recliner. CCE on the tube. A nice way to ease into the day.

@mixailzov2361 3 года назад

Мужик ты молодец!!! Ты не одинок в своей работе. На днях собирал цилиндр в 2 метра. Все операции делал как ты.👍👍👍

@Jimmypupkin 3 года назад

I have no interest in machining but these are some of the best videos on RU-vid! Wholesome content and amazing editing!!!!

@CuttingEdgeEngineering 3 года назад

Hey mate thanks for watching glad you enjoy the vids 😎👍

@Bobbywolf64 3 года назад

4:30am, but I'm not going to bed before I finish this vid. Time zones be crazy.

@CuttingEdgeEngineering 3 года назад

Priorities on point 😎👊💥

@jc-pj3nh 2 года назад

In one of the comments a viewer said a high school shop teacher said that manual machining was going to be replaced by CNC. When I set up my home machine shop by friend who was a trained machinist for years would not let me start out with CNC machines. He said to buy manual machines to learn on. He taught me safety using the machines I purchased. He said the best machinist started out using manual machines. You have to THINK about what you want the finished job to be. Your brain now becomes the CNC computer. I amaze my self with what I am able to produce and how I can accurately reproduce the same results. I am now a REAL machinist not a button pusher. Get a lathe and mill and your only limited by your imagination with what you can make or fix. Keep the videos coming. Thanks.

@jwdickinson643 3 года назад

you can tell the fur munchkin is VERY well and deeply loved. what a personality!

@CuttingEdgeEngineering 3 года назад

Definitely living his best life

@Hraethigaldur 3 года назад

Did you have any idea when you started this channel that it would be Friday's highlight for so many people? :) Thank you for making my life a little brighter this weekend.

@CuttingEdgeEngineering 3 года назад

Hey mate nah honestly had no idea it would take off like it has! We really appreciate all the great comments and viewer support 😎👍

@padderickpeak9493 3 года назад

every dog in australia must think their other name is 'oi' lol

@graememellor8319 3 года назад

or CU in the NT

@bubbleobill267 3 года назад

Mine does

@supersuppliers 3 года назад

oi-mate 'real name'

@ypaulbrown 3 года назад

@@graememellor8319 is that See You Next Tuesday?

@mattgraham1983 3 года назад

Or "get"

@peek2much3 2 года назад

I love how you both protect him from the shop hazards. Focus on his feet with all that burr and sharp steel chips. Very dangerous for him indeed. Great channel!

@wizrom3046 2 года назад

I've got a 7x12 minilathe, and learning stuff from you... Use a forklift and crane to load the stock in the lathe... Tick. Use a 5 metre tape measure to check the stock length... Tick. Boring bar as thick as my leg... Tick... Sheesh, I think I just broke my minilathe! 😋

@barillius 3 года назад

Never had an interest in this line of work but, damn... these videos fascinate me. Good on ya, mate! keep on keeping on!

@CuttingEdgeEngineering 3 года назад

Hey mate thanks for taking time to watch glad it's enjoyed

@unclebuzz6913 3 года назад

As sit here at 12:38 AM, having coffee as to fall back asleep. I am mezzmorized or in a frigging trance watching this video.. As I have no life. Just kidding, the rednosed pit, and the German shepherd woke my old ass up as to go out and do whatever they want to do as I am their human. Now my old ass is going back to bed... Another home run(it's a baseball analogy, great video) youngman God bless you and your loved ones Godspeed

@CuttingEdgeEngineering 3 года назад

Hey mate thanks for taking time watch at that crazy hour! Enjoy your Friday after some beauty sleep 😎👍

@edmedlin2936 10 месяцев назад

Love it. I understand everything you are doing and can apply it to my much smaller scale machine shop here. Also love your "can do" attitude. You just get it done right.

@tonyfnd 2 года назад

Love the channel and content. Absolutely love the dog. I think the best part is the outtakes at the ends of the episodes where your not reading a script or anything. Your just being yourself, swear words and all. Much more relatable. Thanks for the vids. Keep them coming.

@PB-wb2kj 3 года назад

Thanks fam, love seeing these videos. Has taught me a lot.

@CuttingEdgeEngineering 3 года назад

Awesome glad you get something out of the vids

@lopezgabriel6845 3 года назад

Exelente trabajo,Saludos desde México. El perrito es una fiera jajaja

@CuttingEdgeEngineering 3 года назад

Thank you

@ronaldziehlke9720 3 года назад

You know what goes well with my coffee on a Friday morning? One of your latest videos. Now my day is complete!

@StormyITO 2 года назад

I watch these every night before bad, the sounds of tools are very relaxing, especially the wrenches when setting up.

@paulmichaelfreedman8334 3 года назад

That dog remains an absolutely beautiful specimen.

@TheEvertw 3 года назад

Nice work, as always! At last a job without nasty surprises ;-)

@shaneschratt5123 2 года назад

That boring bar at 7-8 minutes is simply amazing. You’re hogging off some major material… between the bar and the inserts they make for some rapid removal…🤙🤙

@HKRXPRS 3 года назад

Thank you Curtis, your videos are the best thing in the world for putting my 2 year old daughter to sleep. We both really enjoy your videos though and hang out for every one of them.

@tristanhali8252 3 года назад

About time! Needed my CEE hit!

@CuttingEdgeEngineering 3 года назад

Enjoy mate hoping to have some bonus mid week vids soon

@graememellor8319 3 года назад

Homeless says "how can I be a safety officer if ya lock me up in the office all day"

@marinemike01 3 года назад

I thought that’s always what you do with the safety staff. Put them out of the way and where they can’t see the debauchery. 😂😂

@bronco1786 3 года назад

😆😆😆

@Stepinup 3 года назад

Hant yu ever sent yr safety officer away on a blind mission

@bigunone 3 года назад

@@Stepinup I refuse to answer that on the grounds it might incriminate me. Besides I believe the statute of limitations has runout! 🤣

@merr6267 3 года назад

I was a young engineer at a manufacturing company that has been mentioned in this shop before. They had demonstrated a new machine in front of the executive staff and other office folks, and shut it off a bit more abruptly than many expected. As things were wrapping up a 'very experienced' guy starts casually spreading the fresh sand around with his feet where the machine had been demonstrated. He told me to join in before the safety and enviro mental alarmists noticed the few quarts of oil that had spilled when a hydraulic line blew. By the time they came by, the machine had been moved to the wash bay, and there was nothing but clean dirt over the crime scene. Like you said, don't let the safety officers know about any of the fun. They'll write a policy, and an oversight policy, and eventually need 3 managers to ensure all the boxes are checked.

@johng8473 3 года назад

Videos just keep getting better. Camera and special effects are very nice. Thanks for sharing your shop with us. Curtis you do fine work.

@willemstreutgers1154 3 года назад

This is again a good one ! Camara work and comments as well as explanations of how and what is worth an Emmy award.

@CuttingEdgeEngineering 3 года назад

That's a hell of a comment thanks mate we appreciate it

@tonypinker2884 3 года назад

Well its definitely not just the machine, its all the shit you need to go with it that's mind boggling just to do the job....

@CuttingEdgeEngineering 3 года назад

Yeah definitely adds up!

@tiredoldmechanic1791 3 года назад

These tubes made me think of David Wilks. His last video was listed as part 1 of 3 and was posted in February.

@CuttingEdgeEngineering 3 года назад

Yeah I noticed he had no new vids for quite a while someone had commented that he had been laid off from his work but he is ok

@shaneward6689 3 года назад

I've been wondering if he's alright too , loved watching his work , dunno how to find out though

@awesome-iz6xb 3 года назад

Even though I am from the States, I really get into these videos from CEE. Nothing like pulling up a chair and relaxing with a Fosters and a Vegemite sammich. Of course a lil Colin Hay on acoustic playing low in the back ground never hurts either. Thanks for posting Kurt! Yeah, I go full balls to wall.

@CuttingEdgeEngineering 3 года назад

👏🤣🇦🇺 Straya mate sounds like you got it sorted

@awesome-iz6xb 3 года назад

@Miscreant Mil Here in the States you get what you get. Just lucky to get a Fosters.

@markfryer9880 3 года назад

@Miscreant Mil At the very least send the poor boy a slab of VICTORIA Bitter or VB for short.

@user-om5qd3nt7c 2 года назад

Всё как везде ,У нас инструмент ,станки попроще ,а работа та же. Удачи парни. Заказов Вам побольше ,да клиентов понадёжней. С приветом из России.

@joegee2815 3 года назад

Mugger: "hand over your wallet or I'll use this tube!" Kurtis: "That's not a tube..."

@markfryer9880 3 года назад

Kurtis would just pull his anti-vibration boring bar out of his back pocket. The Mugger looks alarmed! Kurtis: Now, this is a boring bar! I can club you over the head with it OR I can use it to Bore you out! Which is it going to be! Mugger: Yelps and starts running away. Karen: Are you going to chase him? Kurtis: Nah! Wot for? He's already shit his pants and been scared straight! Karen: How do you know that! Kurtis: Just looks at the brownish spots on the ground and looks back at Karen and just nods his head. Karen: Oh dear, how embarrassing!

@ke6gwf 3 года назад

And what do muggers do? They mug people! (a reference a few people might get lol)

@19672701 3 года назад

That was cool using the tailstock chuck lining it up for the steadyrest. Does that boring bar have media or some sort of viscous fluid in to keep it from vibrating,or is it just the girth? Great video,like the big machining.

@fernandoaraujo8792 3 года назад

Essa oficina é um sonho de qualquer torneiro mecânico...os tornos da aí é mais automatizado dos que eu trabalhei em 1991, eu ainda sou apaixonado por essa aí profissão.

@jc-pj3nh 2 года назад

That is one killer boring bar. In a past video you called that machine a watch lathe. Suppose you could really duplicate Big Ben, so your description is not too far off!. Fascinating video, am addicted to your channel

@Murphyslawfarm 3 года назад

G'day great video Karen as always and nice job for Kurtis because you did not need to fix it or clean it before working on it 🤣😂🤣😂. Love Homeless 🤘

@CuttingEdgeEngineering 3 года назад

Haha yeah this was a bit of a treat! Thanks from us all 👍

@peterhall6656 3 года назад

Kurtis - you are too young to remember Sir Les Paterson at his height. He memorably said in an interview with Parkinson I think: "Put it in and walk towards me girlie"

@alancunningham479 3 года назад

Gotta hand it to you,that live chuck and anti-chatter bar made the job a real bit of gravy.

@ivoryjohnson4662 3 года назад

Glad to see another production

@randydeboer832 3 года назад

Great work, Did you ever get the big lathe you bought months back up and running? Why was the inspector on time out? Have a great weekend.

@CuttingEdgeEngineering 3 года назад

Hey mate the big lathe is in progress got a few more things to do to it before it is ready. This job was sending sharp chips everywhere so he was out of the way for safety 🤣👍

@2xKTfc 3 года назад

@@CuttingEdgeEngineering When the inspector gets the heck away from a job instead of stating his displeasure that should tell you something :D

@ChrisR2517 3 года назад

That should sink a spy ship !

@Stepinup 3 года назад

I recon so ..shhhhh

@markfryer9880 3 года назад

@@Stepinup Just don't mention the spy ship. I did, but I think I got away with it! Shhhhhh

@foolshollowsportsmanclubgu2027 3 года назад

Torpedo tubes????

@howder1951 3 года назад

Another enjoyable job and like you said nice change from the repair jobs you've been getting. Cheers to all of you!

@CuttingEdgeEngineering 3 года назад

Hey mate yeah was a bit of a treat this one, nothing to clean or fix haha

@bobmiller7502 2 года назад

riveting a real page turner never boring, thanks 4 sharing,,xx

@GutterClown 3 года назад

What's with all the machining and metal work? This is now a doggo channel.

@CuttingEdgeEngineering 3 года назад

Doggo apologises for the interruptions of unnecessary machining and some Carl guy talking 😂

@BobOBob 3 года назад

@@CuttingEdgeEngineering At least people send Carl beer. That's not a bad role.

@MattysWorkshop 3 года назад

Gday, that was a nice simple easy job, the anti vibration boring bars are good thing and to be able to interchange the ends is a great idea, I wonder what material they are made from to reduce the vibration, there were decent size cuts you did and no sign at all of chatter anywhere, thanks for another very enjoyable Friday evening, have a great weekend, cheers

@CuttingEdgeEngineering 3 года назад

Hey Matty yeah this was a bit of a treat job, nothing to clean or fix 🤣 The anti vibe bar is a special combo has a chunk of carbide in the end of the bar to dampen the vibrations. Goes well. Cheers mate, Kurtis 😎👍

@rlaxton666 3 года назад

@@CuttingEdgeEngineering Seemed to have a fair amount of spring though, leaving a pretty decent scratch on the way out. I guess that is not critical in this case. Keep up the awesome videos. Definitely my favourite machining porn :-)

@Theprofessor1212 3 года назад

Awesome work as always!

@mikelooloo6997 3 года назад

Hi kurtis , this is Mike from Singapore been watching your video for sometime and I find it is very informative.been a machinist myself retired now.can’t wait for your part 3 of restoration of the milling machine.keep up the good work you doin great.

@molitovv 3 года назад

Your videos give us what Abom used to, please don’t start making meat rubbing videos.

@markfryer9880 3 года назад

Only after Homie has been well fed, otherwise.........

@boltonky 3 года назад

Appreciate another enjoyable video and the outtakes are always a good laugh and shows the effort that is put in to make the videos :) Have a great weekend/week

@descent815 3 года назад

Outtakes are the best! Great video!

@bentheguru4986 3 года назад

Nice & clean workshop suggests a lot about the company/operator.

@tomasvillarreal6810 2 года назад

I just love the fact no indication is needed with both self centering chucks. 👍

@geoffcrumblin9850 2 года назад

He does a great range of work for a one man show. Very impressive work, some great engineering innovation.

@handdancin 3 года назад

the chips in the tube as its rotating make a really awesome sound

@clintonmiller4917 2 года назад

Love this channel. I’m a newbie from USA, NJ Great content

@eggsaladsandwhiches 2 года назад

I’ve seen men envy a lot of different things. Never expected I’d have lathe envy. Great work as always.

@markfryer9880 2 года назад

Careful Joe, lathe envy can lead to hobby machining, a very expensive and never ending hobby.

@garethharris8286 3 года назад

That is a next level quality boring bar

@lezarathustra 2 года назад

discovered the channel yesterday, having a great time with all the eps, and the security officer is the best - luv it!

@jackhammer4248 3 года назад

SELF MADE!! Best part of this story 💪💪 Your wife is good at getting the right content as well 👍 Luv the outtakes 😂

@lampadophoros 3 года назад

A tedious job, done beautifully! And ….that is one mega boring bar! Thanks

@sawboneiomc8809 3 года назад

I know for a fact this is gonna be another great video worth staying up for!....

@dededex9394 2 года назад

Always great and satisfying seeing you repairing the caterpillar parts.

@Driving_fire_truck 3 года назад

Curtis, as always, you are at the Olympus in terms of responsibility and quality of performance !

@alexrutter8880 3 года назад

5:40 the best camera angle to date!!! Outstanding!

@dystopianlucidity4448 3 года назад

The best part of Friday mornings for me, coffee and Cutting Edge Engineering video! Be expecting a package to arrive soon that I had made for y’all! Love the vids!

@CuttingEdgeEngineering 3 года назад

Hey mate! Glad you can enjoy your Friday mornings with the vids. And thanks for sending us something will keep an eye out. Cheers!