Magpul PRS Lite Review 

The reason the stock doesn't fit right is because the Radian end plate is a QD mount. Put a mil-spec plate on and it will be the correct fit.

Bravo for a pro/con review. I should receive mine today. I don't find the back and forth play of the LOP to be a problem. Pressure from the shoulder and recoil will always keep it solid forward. I also don't think the cheek riser play will matter. If anything, a rubber or nylon gromet placed under the front of the cheek piece will eliminate the play. Thanks for pointing out those area regardless! I'd be more inclined to buy products based upon honest reviews like this!

Transparent, thorough, and honest review. Very well done, sir. Subscribed.

Thanks Brad for being honest and producing the best PRS Lite review out there!

Thanks for the update and complete review. Great job on the review.

Thanks for the unbiased review. Ordered mine today. The small issues you discovered shouldn’t be too big of a problem but only time will tell. Gonna run this on my AA 308 SF piston rifle.

I'm about to begin a similar 6mm ARC build using the PRS lite. Thanks for showing the differences and how your install went.

Great review. Question on the blanked plugs at the rear. Are they for QD mounts as I can't find any info on that. I took mine off and the holes are too big.

Good review…does the lightweight version feel just as durable as the original? The cheek riser seems like it could be a bit weak / easy to break

Just received my PRS lite. Easy install on my Aero Precision AR 10. No movement at all on the extension. Cheek riser slightly flexes, so I wedged a small piece of neoprene rubber under the front edge and it cut down on the flex- did not totally eliminate the flex but “ no big deal.” Does not bother me at all. Very happy with the purchase.

Happy i came across this video, i didn't know i could get precision cut foam pads for this stock! Cant wait to get it in the mail

Thanks for the review!

I had play back and forth when I installed it on my PA10 Gen III. I just used a small piece of Velcro on the buffer tube where it is on a angle. I used the stiff Velcro. (Male part.) And I have had it out to the range a few times now. It is rock solid.

I like the look of these as well as the price point. I'd love to get one to try out on my 18" SPR build. Nice job on modifying it a bit to fit better. Love that camo pattern on that rifle by the way. I would prefer the easier adjustments of the PRS gen 3, but it's a good compromise. That Arken scope looks like a beast! Thanks for the great review on this stock....definitely will helps folks decide if they want to save a few bucks and get this version.

Brownells has this stock on sale for $85 right now. Best price I have seen for a PRS style stock.

I added a 1.5 inch by 1 inch piece of 3/16 inch thick neoprene rubber under the cheek riser. It really firmed it up. Like I previously said, I have no movement what so ever with the extension piece on my Aero Precision AR10. I'm very happy with it.

Very good info. Thank you

Is that an a builders set or cerakote?? looks really nice. would love to see a follow up once you have some rounds down range

Since tools are necessary to make adjustments, is the PRS considered a fixed stock/California compliant?

What’s the sense of having an adjustable precision stock if it’s not rock solid in any position. That’s just not going to work for me. I’m going to have to go with the gen. 3. I know it’s more money, and heavier, but the more ease of adjustment, and being more solid just means more to me than lighter, and less money.

I actually really really like these, running it on a 13.9 pin and welded build

Just got one myself for my DMR/SPR build, sadly magpul was out of normal buffer tubes so I got their " Enhanced Extension " , no big deal. I'll still be able to collapse as small as normal, but will have 3 more adjustment points in case I want to make the LOP longer. I suppose it actually will make more sense for my build as well once I get the barrel work done.

I can’t seem to find one of those rubber cheek pads online anywhere, where do you buy those? Thanks

Great review....I just installed one on my son's AR10 308 build today. Sadly, I got the same issue with the loose parts including the forward piece toward the end plate. What a shame...maybe Magpul can explain how to correct the sloppiness.

Any wobble or play in the stock itself ?

Just subbed you might be the only dude who did a review on this stock. Now do a video on the whole build. I like the look of that rifle. What scope and barrel length is that

Does it matter if I have mil spec or commercial spec buffer tube? On AR 15

Wish it would fit the Sig tread 308

You using a rifle buffer tube or a carbine buffer?

What's the name of the pad you put on the cheek riser? Thanks!

Great review! But, the music drove me nuts.

What is the scope mount on this build?

Yes to many issues with how they designed it and my fear is that over time those small movements will become more exaggerated.

Does it use standard m4 buffer tube or the longer A2 buffer tube?

so it don't use the normal holes on the buffer tube to hold it stable?

Thanks for a great review. But it would be much easier to hear the travel of the stock without background music though.

Will this fit a rifle length buffer tube???

Wanted one until I saw you needed an Allen wrench to adjust it

Do you think this will work for 5.56 and using a h2 weight?

Can I use this stock on a riffle buffer tube system ?

What Is The Name Of Leather Sleeve You Have On Your PRS AR 10

I just got my prs light and I have to say I’m not a fan. Even completely collapsed the only thing preventing the stock from sliding back on the carbine buffer is a single tension screw (I’m not talking about the adjustable part, I mean the entire stock moves) I’m using an aero precision carbine tube I don’t know if it’s an issue with the way the aero tubes are sized (they are supposed to be mil spec) but with moderate force you can pull the entire stock back about a quarter inch away from the castle nut. This method of attachment to the tube is sub par. A fixed stock should be way more secure than this. Personally I’d rather go with the regular prs and an a2 buffer.

After doing some investigation, for a semi precision rifle, buy the B5 CPS or the LMT DMR. Leave everything else behind.

You can save another pound and a half in weight by changing the Arken scope for a Leupold

Thanks for the info, Almost pulled the trigger on one, What a POS.Now I know why they are on sale. lol

Mine doesn't have any of those issues

Magpul always does that with new products. They tease them for seasons upon seasons until you don't care anymore and then they release it...

A cheap cheek pad is mole skin. When it gets worn just peel it off and replace it.

I think your end plate backward

Interesting design, but it doesn’t seem particularly well executed? That’s unusual for Magpul…

Why on earth do you need a 6-24 scope on that rifle?? 😂

That length adjustment screw is absolute garbage it breaks after a week. Put this on a knights armament sr15 and Daniel defense mk12 both broke and no longer adjustable. Absolute trash. Stock is best

A little play! Big deal

See you're problem is you're talking about the stock instead of using it.