Тёмный

Mahlkönig EK43 | Maintenance cleaning 

Mahlkoenig
Подписаться 4,9 тыс.
Просмотров 29 тыс.
50% 1

WARNING:
The instructions shown in this video are meant to support qualified technicians and trained staff, only. Only parts that comply with the original appliance specification may be used for repairs. Mistakes in opening or assembling the machine may cause injuries and/or damages and malfunctions.
If the machine gets opened by an un-authorized person, the manufacturer’s liability and warranty expire.
WARNUNG:
Die in diesem Video dargestellte Anleitung richtet sich ausschließlich an qualifizierte Techniker und geschultes Fachpersonal. Fehler beim Öffnen oder Montieren der Maschine können zu Verletzungen und/oder Beschädigungen und Fehlfunktionen führen. Bei Reparaturen dürfen nur Teile verwendet werden, die den ursprünglichen Gerätedaten entsprechen.
Mit dem Öffnen der Maschine durch eine nicht autorisierte Person, erlöschen die Haftungs- und Garantieansprüche gegenüber dem Hersteller.
Hemro International AG
Länggenstrasse 34
8184 Bachenbülach
Switzerland
Phone: +41 44 864 18 00
Fax: +41 44 864 18 01
E-mail: info@hemrogroup.com
Homepage: www.mahlkoenig.de

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@averagedave1953
@averagedave1953 Месяц назад
Hi there, seeing you using UH1 84-201 (705172) lubrication on the shaft and spring instead of UH1 64-62 (105168). Is this the new revision that is not being aware of?
@MahlkoenigGrinders
@MahlkoenigGrinders Месяц назад
Here is what we use in the factory www.mahlkoenig.com/products/kluberpaste-lubricant?srsltid=AfmBOopQFbmjvTYKiTYYTY87cu__fxcyaQFwF0SDsX2bmGMUnwYDdAWm
@Pinjulama1998
@Pinjulama1998 7 месяцев назад
Hello. How can i get that magnet to take that steel circle out? Some staff put the circle one first and it is stuck there
@MahlkoenigGrinders
@MahlkoenigGrinders 7 месяцев назад
You could try a long pair of needle nose pliers and carefully remove it. Hope this helps!
@carlarodrigues4227
@carlarodrigues4227 3 года назад
How often you should do this cleaning? And what is the name of things white thing you pass on it?
@MahlkoenigGrinders
@MahlkoenigGrinders 3 года назад
We recommend cleaning your grinder once a week to maintain a good coffee quality. The white grinder cleaner is called GRINDZ and is available through our Mahlkönig dealers. 🖐😀
@Sardariii
@Sardariii 3 года назад
Great
@iCrispytostone
@iCrispytostone 8 месяцев назад
What does it mean control the fine adjustment
@MahlkoenigGrinders
@MahlkoenigGrinders 7 месяцев назад
To control the adjustment of coffee fineness
@АртёмЧацкий-э9в
can you suggest the oil for the machine? is there any specific features that i should know?
@MahlkoenigGrinders
@MahlkoenigGrinders Год назад
Be sure to use a food safe lubricant. I’m the factory we use this www.mahlkoenig.com/products/kluberpaste-lubricant
@helena4950
@helena4950 3 года назад
How much isn't?
@MahlkoenigGrinders
@MahlkoenigGrinders 3 года назад
To get a current price information we would kindly ask you to contact your local Mahlkönig dealer. You can find the closest dealer through the dealer search on our website.
@averagedave1953
@averagedave1953 4 месяца назад
Do you have torque specs for the screws?
@MahlkoenigGrinders
@MahlkoenigGrinders 3 месяца назад
Just make sure they are sufficiently tightened
@陳均安-d8k
@陳均安-d8k 2 года назад
Hi , May you suggest the proper tools to remove the bushing and spring from motor shaft in 3:25 ?
@MahlkoenigGrinders
@MahlkoenigGrinders 2 года назад
We would suggest a quality pair of long nose pliers.
@陳均安-d8k
@陳均安-d8k 2 года назад
@@MahlkoenigGrinders Thank you.
Далее
How To Clean the MAHLKONIG EK43S Coffee Grinder 🧼
10:20
У КОТЕНКА ПРОБЛЕМА?#cat
00:18
Просмотров 745 тыс.
Women’s Free Kicks + Men’s 😳🚀
00:20
Просмотров 1,2 млн
Mahlkönig EK43 | Burrs exchange
5:19
Просмотров 2,4 тыс.
Mahlkönig E65S GbW | Maintenance cleaning
6:27
Просмотров 32 тыс.
Mahlkönig - EK43 保養清潔
6:16
Просмотров 658
Mahlkönig K30 cleaning
24:11
Просмотров 1,8 тыс.
How to align the EK43 burrs
16:55
Просмотров 11 тыс.