🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
My flying buddy (Dave) has recently got into 3D printing planes for FPV... and of course he started with one of the biggest you can find, the Titan Avenger! 😅 This really cool 'predator' like model has a 2.2meter wingspan and has an all up weight of approx 3kg with 2 x 7,000 4s2p 18650 in parallel. We knew this wasn't going to be the easiest to launch so we gave it full throttle and a good hard throw! As you can see it looks great in the air and it can really shift when it needs to. Dave was flying quite fast everywhere (like me he doesn't enjoy flying economically or at cruise throttle) and I think we worked out he could stay in the air around 1hour flying like that... god knows how long it would stay in the air if he tried to fly efficiently. The only problem he had on the day is landing. We knew this would be the most tricky part. It's on a narrow rough road, or in the bushes. Landing in the bushes put too much stress on the fuselage part where the wings join it and did a little damage on both landings. Next time it will be a road landing with something on the belly to protect it (wheels, skids etc).
The footage in this video is from the O3 air unit on my Zcon and from the Walksnail avatar pro vtx on the Avenger. However, Dave hadn't updated the firmware so the footage couldn't be stabilised in Gyroflow. The fixed camera on the ground is a Runcam 2 and it really didn't handle the bright sky very well.
Thanks for watching, if you have any questions about the Avenger feel free to ask, but remember it's not mine and I might not know the answer... but Dave might show up to answer if I can't 😃
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdamGaCoffee
🔵 Follow me on my Facebook page for updates, build logs, random pictures & vid clips that don't make it to RU-vid: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/BanggoodFPV
✅ RMRC ► tiny.cc/RMRC
✅ AtomRC ► tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► tiny.cc/Amazon-FPV
✅ HobbyKing ► tiny.cc/HobbyKing
========Avenger Setup========
-Titan Dynamics - Titan Avenger ► www.titandynamics.org/3dhanga...
-3D printer used ► tiny.cc/FlSun-V400
-Filament used ► tiny.cc/LW-PLA
-Motor ► tiny.cc/T-Motor-700kv
-ESC ► store.tmotor.com/goods-903-AT...
-Servos ► tiny.cc/EmaxMGservo
-FC ► tiny.cc/Matek-F765-WSE
-GPS ► tiny.cc/220GPS
-Control link receiver ► tiny.cc/TBS-Nano-Rx
-Battery ► 2 x tiny.cc/ZOHD-7000-Lion
-Digital video transmitter ► caddxfpv.com/collections/walk...
On Dave (flying the Avenger):
-TX16s Transmitter ► tiny.cc/Radiomaster-TX16s
-Crossfire tx ► tiny.cc/TBS-Crossfire-TX
-Walksnail Avatar goggles ► caddxfpv.com/collections/walk...
========ZCon Setup========
In the Air:
-56" Ritewing ZCon Twin ► Only available if you email Chris at Ritewing directly: ritewing@hotmail.com
-DJI O3 Digital transmitter and Camera ► tiny.cc/DJI-O3
-Sandisk 256gb V30 Micro SD for onboard 4k60f recording ► tiny.cc/Sandisk-256gb-V30
-2 x TrueRC Singularity antennas on the O3 ► tiny.cc/Singularity-72mm
-Matek H734 WLITE Flight controller (Running iNav6) ► tiny.cc/MatekH743wlite
-2 x Badass 2310 1680kv motor ► tiny.cc/Badass-2310-1680
-APC 6x4e and 6x4ep ► tiny.cc/APC-6x4
-Hitec HS225MG Servos ► tiny.cc/iiww8y
-2 x Little Bee 50a BLHeli32 ESC ► tiny.cc/LittleBee50a
-Tiny GPS Rx ► tiny.cc/220GPS
-TBS Crossfire Nano Rx ► tiny.cc/TBS-Nano-Rx
-Prodrone 868 tuned Dipole antenna ► tiny.cc/Tuned-dipole-868
-2 x 4,000mAh 5S in parallel ► tiny.cc/5S-lipo
-Red COB LED's ► tiny.cc/COB-LEDs
On me:
-DJI V2 Goggles ► tiny.cc/DJI-V2-Goggles
-TrueRC Omni Stubbies ► tiny.cc/TrueRC-Stubby
-TrueRC X2Air's ► tiny.cc/DJI-X2-Air
-Sandisk 64gb V30 Micro SD for goggle DVR ► UK Link: tiny.cc/SanDiskV30UK - USA Link: tiny.cc/SanDiskV30USA
-TX16s Transmitter ► tiny.cc/Radiomaster-TX16s
-Crossfire Micro Tx V2 ► tiny.cc/TBS-Crossfire-TX16s
15 май 2023