Maintaining Your Baitcaster Reel: Part 3 - Assembly

Подписаться 72 тыс.

Просмотров 64 тыс.

50% 1

In this video I show you how to completely disassemble and reassemble your baitcaster. Don't forget to check out the first and second parts of this series for complete cleaning, maintenance, lube, etc. of your baitcaster reels.
Thank you for your support!!! Please comment, rate and subscribe!!!!
As always, thank you for your continued support. I appreciate you guys and gals!!
For Business Inquiries ONLY: james.loduca@gmail.com
If you're looking some great deals, check out these links:
Check out Oliver C. Joseph - Dodge-Ram-Chrysler-Jeep here
bit.ly/ocjTJ81
----------------------------------------
TJ81 CODE FOR 20% OFF
BioSpawn - goo.gl/3uNZGe
-----------------------------------------
Shop Karl's Bait and Tackle
gokarls.com/TJ81, so go and check them out.
------------------------------------------
15% OFF Entire Order + FREE SHIPPING on Orders $60+ At Cal Coast - Use Code TJ81
CalCoast.Tackle...
-----------------------------------------
Get $10 off your FIRST Mystery Tackle Box Subscription (Valid for NEW Subscriptions ONLY) - use code TJ81 - mtbfish.com/TJ81
_
15% OFF Entire Order at Al's Goldfish Lure Co. - Use Code TJ81
bit.ly/alsgoldf...
-----------------------------------------
Shop TackleFreaks Here
bit.ly/2u7Ixvf
-----------------------------------------
Use coupon code: TJ81 for 15% off
NuTech Lures - goo.gl/bJxu1c
-----------------------------------------
Power Team Lures Code TJ81 for 15% OFF (I receive 0 kickbacks from that code, it's strictly to help YOU)
goo.gl/NieTc8
-----------------------------------------
Jekyll Baits - Use Code TJ81 for 15% OFF (No commision): jekyllbaits.com/
-----------------------------------------
Okuma Rods and Reels.
Okuma.TackleJun...
-----------------------------------------
Check out Gaslight Vinyl here:
bit.ly/Gaslight...
-----------------------------------------
Nautic Sport - Code TJ81 20% OFF
nautic-sportin...
-----------------------------------------
Connect Scale (Affiliate Link)
Use Code TJ81 For 15% OFF
connectscale.ta...
-----------------------------------------
Check Out YoloTek Charging Pole For Boats
goo.gl/jWfnPc
-----------------------------------------
Fish Monkey Gloves - Use Code TJ81 for 20% OFF goo.gl/eXEphq
Subscribe to TackleJunky81: bit.ly/TackleJu...
And follow me on Twitter: / tacklejunky81
Facebook: / tacklejunky81
Instagram: / tacklejunky81
#ReelMaintenance #Bearings #HowTo #DIY #BassFishing

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 212

@jpound8910 8 лет назад

There's not a better set of videos on the web for disassembly, cleaning, and reassembly of a baitcaster. Good Stuff Brother.

@TackleJunky81 8 лет назад

+Jason P (bafishaholic) Appreciate the comment Jason!

@JoostMoree 9 лет назад

The set-up of this video and the level of explaining is great. But what enjoyed me in particular is the following. I'm Dutch and thus as a not native speaker used to speak BBC english. This is an example of an American speaker I can understand 100% !. Thumps up!

@TackleJunky81 9 лет назад

+Joost Moree Appreciate the comment and thank you for watching!!

@Flukemaster 10 лет назад

OK. I just finished all three. These are awesome. They are by far the most in deapth videos that are out there. Great job James. One question. Do you ever take the handle appart and lube it up?

@TackleJunky81 10 лет назад

Thanks Gene, really appreciate the comment buddy!! I answered this on messenger but wanted to put it here as well in case anyone else has this question. I believe the bearings in the handle are sealed, in which they require no maintenance. From my understanding, once they go bad you just replace them. All I do is put the drop of oil behind the knobs as you see in the video. A lot of my reels are 4-5 years old and the handles are just as smooth as they were when I bought them.

@robertbrandywine 10 месяцев назад

Insert a pick into the hole in the end cap and lift it off. Underneath is a screw. Remove that and you'll see a bearing on each end of the handle shaft. These bearings are 8 x 5 x 2.5 mm.

@kaitlyn4058 4 года назад

Thank you so much for these videos. My old Pflueger Patriarch finally got its first real cleaning! It’s more than 10 years old and feeling better than ever.

@garymccraw1466 7 лет назад

I Clean Reels For about 5 years for other People. Thanks for your Tips

@markbroda3783 9 лет назад

GREAT videos on taking apart a reel, cleaning, lubricating and then putting it back together! I followed your steps to complete both my JM Carbon and JM Signature and they are SMOOTH beyond belief now. I did notice there were a few extra washers under the handle on the Signature, but I had my schematic and easily found what order they went on. The only areas I had any "problems" (if you'd call them that) were putting the smaller gear with the white piece back on, in the correct way, but there is only one way and you darn well know when you get it. The other was learning that when it's time to reassemble make sure the casting trigger is not "Down" (engaged). I just couldn't get things to fit nicely until I got the trigger back up (I had it down from greasing it). Thank You so much for putting these vids out here. I never had the confidence to do this until I watched them and now I'm sure to get years of happiness out of reels that I really like!

@TackleJunky81 9 лет назад

Hey Mark, really appreciate the comment man. It's comments like this that make me want to continue what I'm doing. It's amazing how much smoother you can make your real than how it came from the factory. I prefer to oil some things that they grease and then they over grease on top of that (which is just to get through the warranty stages) but it kills performance. You're correct on the extra washers, the Morris has a 14-lb drag system compared to the 10-lb system on the reel in this video. Like you said, most of these parts can only go on one way, just take your time, keep your schematic handy and you'll do just fine...plus you get the satisfaction out of doing it yourself. Thanks for watchin man and good luck this season!!

@TackleJunky81 10 лет назад

@Ryan Strong...no reply button. It sounds like you have the metal washer below the main gear on backwards....kind of looks like a saw blade, try switching it and see if that works.

@bassfishinglover638 10 лет назад

Ya, I been a subscriber forever! I have aatched that vid countless times but I aas happy when you came out with this one, helped me more due to the better quality! And I ended up buying thay quantum stuff and the swabs and shimano grease because you said so!

@TackleJunky81 10 лет назад

Hey bud, glad I was able to help you. Yeah, those first vids didn't have the best quality and that was another reason why I redid them. I've tried many different lubes and that Hot Sauce and Shimano grease are definitely the best in my opinion. Thanks for your support bud!!

@raybuttigieg1343 3 года назад

Excellent work. I really enjoyed this series of videos. Thank you.

@TackleJunky81 3 года назад

Thank you Ray!

@matthewlaborde9942 10 лет назад

great job james I went through step by step on how to clean my baitcaster reel this video helped me soo much great job!!!

@williamraftery9734 6 лет назад

G'Day mate! I've just watched all three vids and read all questions and replies. Best how to I've seen 😍 I've allways serviced all my reels using whatever grease available. I've even used axle grease which only slows things down a tad. Living out in the sticks has its disadvantages hey 😂 I've ALLWAYS disassembled and placed parts in order so assembly is no problem. Thanks for the vids and many thanks for speaking clearly so us Ausies can understand you 😍🇦🇺✝😂

@FishingThePNW 10 лет назад

man, you just put out 3 videos of youtube gold. good job man! hopefully one day i'll talk myself into trying this haha.

@TackleJunky81 10 лет назад

Haha, thanks Elijah!!! Means a lot bud!! In the beginning just take your time, take a lot of pics, get out your reel schematic (if you still have it) and you'll be fine bud. Thanks for watchin!!

@martinquintana4406 6 лет назад

Great video and you are an awesome instructor and you made my life a lot easier doing my own service on my reels. Aloha from Kansas.

@TDD23 7 лет назад

Dude you just saved me so much money! my gf put.my bait caster in the sand and it's all in my gears! now I know how to clean it! thank you so much

@TackleJunky81 7 лет назад

My pleasure!

@t1hawver 10 лет назад

And now I need to go back and clean my reels again... Thanks for the awesome walk through!

@TackleJunky81 10 лет назад

Haha, no problem bud! Hope it helps some of you guys out. Thanks for watchin!!

@franklinriley 9 лет назад

Many thanks for taking the time to make this video. Was a huge help in learning how to do this for the first time.

@TackleJunky81 9 лет назад

No Problem bud! Always happy to help out, thanks for watching!

@keithtyson9512 5 лет назад

I have watched many videos on reel , and bait casting maintenance. You sir, are an excellent teacher! Thank you for creating these videos. I have subscribed, and look forward to studying more.

@TackleJunky81 5 лет назад

I appreciate the comment and thanks for watching!

@TeamRippnLipz1 10 лет назад

Great video James.. This is pretty much what i do... I am very OCD about my reels and how i like them.. I love overhauling my reels and making them perfect

@TackleJunky81 10 лет назад

Thanks brotha!!!! There's nothing like the satisfaction of doing it yourself and seeing how smooth we can make them. TRL!!!!!

@TeamRippnLipz1 10 лет назад

TackleJunky81 Exactly!!! Thats my point EXACTLY DUDE

@imitationreality 3 года назад

I noticed I had a broken line guide and got the part free from the manufacturer but I was nervous as hell to take it apart even though I'm pretty mechanically inclined. The two pressure washers needing to face each other was clutch! The diagram for the reel doesn't show those details. You're the man!

@TackleJunky81 3 года назад

👊💪

@trainersunited4901 8 лет назад

awesome set of videos, getting ready to clean my reels for the first time myself this year. these videos are deffinetly helpful for newbies.

@TackleJunky81 8 лет назад

+Joseph Cramer Thanks Joseph!

@mdc1942 9 лет назад

great video, I just tried finding a parts breakdown online. I have a Quantum GMTi 1070 burner that the spool thumb release sticks on regular, but releases OK on "flip". Again, thanks for an exellent video, even when your daughter broke in to complain that Michael was making too much noise. Brings back memories, My Michael is now 40. Good times.

@TackleJunky81 9 лет назад

Thanks buddy, you're thumb bar may just need some grease on either end. Hopefully it's a simple fix for you. Yeah the kids are sure growing up fast. My youngest, Michael, is becoming quite the fisherman. I put together a video on here that has a clip of him casting in the beginning, with some pics throughout the video. Check it out if you have the time. It's called Good Times with my Boys.

@lanzi655 8 лет назад

Very detailed. I like the way how you have done it. Just payt one and since your video I am not more scared to do it on my own. Thanks. Good work.

@TackleJunky81 8 лет назад

Thanks Rolf!

@talltimber4577 4 года назад

I enjoyed hear your children in the background. Reminded me of when my where young. Enjoy it you will miss it!

@ChaBarry 8 лет назад

Thank you sir. I was able to reassembled my Quantim Smoke reel all thanks to you.

@TackleJunky81 8 лет назад

+barry cha you're welcome Barry!!

@plantcitychuck2551 7 лет назад

you covered it all.best video i have seen yet on this subject.great job

@06SCOOTY06 10 лет назад

Great video, I'm going to grease & oil all my reels now. I have 18 reels, so I think I'm going to be real busy after my B.A.S.S. Tourneys are over this year. Thanks again for the video!

@TackleJunky81 10 лет назад

Your welcome bud. I do 20 or so myself. It takes me a couple months to get through em all, but there's nothing else to do in the winter time so may as well get the reels ready for spring!!

@ChikuyoTea 9 лет назад

That was a very serious cleaning and i felt like u making an art or something. Anyway, u making a great job of it. i'm new to baitcasting reel and i want to learn how to do a maintenance on my canean since i got a secondhanded and quite dirty one. Seeing how u do it make me scare a bit since i really bad with small things. Maybe i only can do basic cleaning and if i want to do really good cleaning, i have to sent to shop or someone that good of doing it. Anyway, great job and thank you.

@TackleJunky81 9 лет назад

Thank you for the comment. It's not as hard as it looks, but if you want to send it to a shop let me know, my buddy does it for a living. Thanks for watching!

@Flukemaster 10 лет назад

First!!!! Sorry man I had to do it. :)

@TackleJunky81 10 лет назад

Haha!!! I'll attempt to get first on your next vid, but your fans are pretty fast!!! Thanks for watchin Gene!!

@c.shoefish 5 лет назад

Pretty much exactly the way I do my reels except I actually use Yamaha Marine grease with REM oil or 3 in 1 oil. My dad and grand father been doing it like that for their reels forever so I figured I'd carry it on. Never had an issue....I do really like that oil bottle though, need to find me one.. awesome in depth series.

@TackleJunky81 5 лет назад

Appreciate you watching, Chris! 👊💪

@jamesdisbrow2157 2 года назад

Thank you for the great informative videos. I am new to this so I will definitely follow your tips and advice on how to do this. God bless.

@TackleJunky81 2 года назад

My pleasure! 👊

@bassfishinglover638 10 лет назад

So I finally did this in my silver max, it is 10x smoother than stock! Thanks ao much! Tommorro it is the qualifier, accurist, and citica

@TackleJunky81 10 лет назад

That's what I like to hear man!!! Good job!! I have vids of the Pro Qualifier on here as well, quality isn't as good but it's another detailed walk through. Either one will help you out! Thanks for watchin!!

@angler_nut692 10 лет назад

Nice job ! Great series

@TackleJunky81 10 лет назад

Thanks man!!

@basshooker689_3 8 лет назад

Jim, nice series on bait caster pm. Very well done!👍

@TackleJunky81 8 лет назад

+BassHooker689 _ Thanks bro!

@brandonreynolds3884 Год назад

Great job explaining 👏 👍

@TackleJunky81 Год назад

Appreciate you watching! 👊

@teamestaves1333 8 лет назад

Man ur a life saver!!! Awesome vid thx

@denelvo 9 лет назад

You could run grease down the bead of the gear cover to seal better. Keeps fine dust out. Also, one-way bearings like silicone grease, it helps the rollers grip the shaft when it's doing its anti-reverse thing.

@TackleJunky81 9 лет назад

denelvo Whatever works for you. Thanks for watching.

@jville533 3 года назад

You know kids dad, they've got to, and are going to finish what they've got to say. I actually go a chuckle out it. Its all good

@noochievarner6327 10 лет назад

great video man!

@TackleJunky81 10 лет назад

Thanks Noochie!!

@anthonymctaggart8572 10 лет назад

Excellent and very informative buddy, will use for sure. Thanks

@TackleJunky81 10 лет назад

Thank you and thanks for watching!

@chasebjjlarkinlarkin9877 4 года назад

Thank you soooo much with my bait caster 🙏🙏🙏

@TackleJunky81 4 года назад

My pleasure!

@cotaloc619 10 лет назад

Great videos James, you do a great job at these!

@TackleJunky81 10 лет назад

Thanks Dakotah!!

@PeterPan-vl7bu 9 месяцев назад

Oh Yes!,nice job thank you!👍

@TackleJunky81 8 месяцев назад

Appreciate you! 👊

@NCTORO 9 лет назад

Thanks I understand now how it works.

@TackleJunky81 9 лет назад

NCTORO You're welcome!!

@basserman87 10 лет назад

Dad.... Make Micheal shut up!!! Lol nice video. Definatley will use this later

@TackleJunky81 10 лет назад

Haha, yeah, they like to butt in the vids every now and then!! Thanks for watchin bud!!

@chantamayo5184 5 лет назад

Its my firstime cleaning my reel and I almost broke it Lamao. thanks for information!!

@TheMada1234567 9 лет назад

finally a guy who gets me ! :) i loved the vid man thumbs up bro

@TackleJunky81 9 лет назад

Adam Chinsiejen Thanks Adam!!

@larrymelling2315 7 лет назад

Excellent videos !

@TackleJunky81 7 лет назад

Thanks Larry!

@VJTrey1 8 лет назад

great video!

@TackleJunky81 8 лет назад

+VJTrey1 Thank you!

@trevabbie 8 лет назад

Great Video!

@matthodgkiss427 8 лет назад

if it weren't for your video my reel would still be apart! Thanks! i subscribed

@TackleJunky81 8 лет назад

No problem! Thanks for watching!

@guslianov 8 лет назад

This is very helpful, but i have some problem when every finish Maintaining (with different baitcaster type), it seem not smoother than before, the part is always put at the right placed, and i use lube at the gear part only, and oil for the bearing. but this video is awesome bro. (Y)

@TackleJunky81 8 лет назад

+Uyung Guslianov I appreciate the view and comment bud, thanks for watching Uyung!

@howabouthetruth2157 8 лет назад

GOOD JOB.

@TackleJunky81 8 лет назад

Thank you!

@howabouthetruth2157 8 лет назад

( PLEASE PARDON MY CAPSLOCK. OLDER LAPTOP. KEYBOARD NOW ONLY TYPES WlTH CAPSLOCK ON. EVERYONE THlNKS l'M ElTHER CRAZY, STUPlD, OR "SHOUTlNG".....LOL.) YA KNOW, l FORGOT TO MENTlON THE LAST TlME l WATCHED THlS 3-PART VlDEO.......l LEARNED FROM A VETERAN REEL-TECH......ON MOST OF THE BETTER MADE REELS, THE AFTER-MARKET BEARlNG UPGRADES ARE NEGLlGABLE, BUT THOROUGHLY REMOVlNG ALL THE FACTORY GREASE & OlL, AND RUNNlNG THE BETTER, LlGHTER LUBES, LlKE YOUR DOlNG.......lS WHAT'S REALLY lMPROVlNG THE PERFORMANCE OF THE REEL......AND YA SAVE "50 BUCKS" ON "BEARlNG UPGRADES". WHAT YOU JUST DlD HERE & SHOWlNG HOW "FREE & FAST" YOUR REEL SPlNS.......PROVES HlS POlNT. BUT OF COURSE BEARlNG UPGRADES DO HELP MANY REELS THAT "REALLY NEED" A PERFORMANCE BOOST BEYOND STOCK..............TlGHT LlNES!!!

@springguntunes 9 лет назад

Thank you for the tutorial and thank you for not saying "uh" a dozen times too. :-)

@imzaazmi 9 лет назад

Thank you so much... It's awesome video....

@TackleJunky81 9 лет назад

+azmi osman No problem! Thanks for watching!

@lenniparssinen4049 7 лет назад

thanks for the videos.

@TackleJunky81 7 лет назад

You're welcome!

@fishingtackle77 10 лет назад

Nice video

@TackleJunky81 10 лет назад

Thanks!!

@randywitterstaetter4309 9 лет назад

Hey man great video best one I have seen by far. I clean all my reels annually and learned some things that I wasn't doing. Hopefully I can improve on what I was doing already. I was wondering about the anti-reverse bearing. How do you know how much oil to put on it once it is degreased? I have always heard putting too much oil on them will make them slip makes me a little timid to mess with it. Also after you rinse the bearings with water, do you vibrate them again in fresh degreaser and rinse again or just blow out? How long do you use ardent cleaner before changing it out with fresh cleaner? I have been using that stuff for awhile but have always sprayed it on and cleaned the parts. Going to try soaking them this year. Sorry for all the questions fixing start the process of 20+ reels just wanted to make sure that I do it all properly. Once again thanks for the great videos and you have a awesome channel with tons of great info.

@TackleJunky81 9 лет назад

Hey buddy, appreciate the kind words. As far as how much oil to put on, I only put just a few drops and then wipe the Ardent swab like I showed. After about a month's worth of use I took a few reels apart to check things out and there was never any oil running down the drag washers, it all stayed in place. I feel that's a good amount, and they were ran all year like that with no issues. It's something you've got to keep an eye on until you have the amount to use down. Once the bearings are rinsed in water I just blow them out. I clean about 20 reels and I change it twice with that amount of reels. As long as you wipe off some of the grease before you soak the parts it doesn't get too clogged. Don't be sorry for the questions man, that's why I'm here and feel free to send me a message anytime either on here or Facebook. Good luck and appreciate the comment!!

@ryanstrong5182 10 лет назад

hey man, i took my reel apart and greased it up and stuff, but when I push the button, i spin the reel but it doesn't engage or pop the button back up. Any thoughts?

@samuelhamad9794 7 лет назад

Really great videos. Thank you for making these. I followed your steps exactly on my Shimano Chronarch 201E5, and at the final stage once I tightened back down the drag star/handle/nut, the whole reel locks up. Can't turn the handle, can't click the spool release button. Any idea why this might be happening?

@samuelhamad9794 7 лет назад

Nvm! Anti-reverse bearing was upside down. Now everything is working properly, and smooth as ever. Thanks again!

@jackmanjls 10 лет назад

TJ, Big bass season coming up in MN and getting prepared. Lately I've been reading diff articles on lubs to use with reel cleaning. It seems like there's been several mentions of Corrison X and Reel X. Several of the users swear by it. I know you like the Hot Sauce but do you have any experience with either of the X products? The X products have a molecular bonding that seems like it's impervious to the elements, mainly rust.

@mikerobinson4698 3 года назад

I've been cleaning my reels since the 90's. I don't go all out like you did but you defiantly did somethings that I've never done. I had a Quantum EX500 reel before I started/knew how to tear down and clean. I did my best to get grease up inside on the big gear but my drag started to fail. I finally decided to tear into it and found the drag washers were oily probably from the grease I was improperly forcing into the reel. I was told they should be dry. I ordered new drag washers. I used hot soapy water to degrease everything and reassembled the reel. I got another 12 years out of that reel before Quantum/Zebco stopped making parts or they sold out of there inventory for that model. I've heard that most new reels drag washers require oil or grease now so how does one know what is to be used on the washers or if they are to remain dry? I was just talking to my fishing partner earlier this evening about the bearing and if you can oil them or if they are sealed bearing. His reply was he read somewhere that some reels have shielded bearings. If that's true, are shielded bearings maintenance free? I've never degreased any of my bearings, just wipe off and re-oiled. I've already cleaned and lubed 6 out of my 9 tournament reels so any changes I do will have to wait another year. A old fishing video I have talked about maintenance of reels and it stated, gears get grease, bearing get oil. You state in your video on the side plate that the one way clutch bearing which you degreased, you apply oil to. I figured since that contains roller pins and has a sleeve that surrounds it, it would also need grease for smooth operation, not oil. Can you explain why you choose oil to apply on the one way clutch bearing?

@TackleJunky81 3 года назад

Hey Mike, carbon washers can be ran dry if you want more bite, but a fingerprint of grease is what I usually do with all my drag washers. Spool bearings are only oiled and should never be greased, but the other bearings within the reel are greased and really don't require any maintenance. I degrease them to make the reel feel a bit smoother, but once you remove the grease you have to maintain them. I've noticed over the years that a greased one way bearing can and will slip especially in colder weather...I haven't had any issues oiling them.

@olivierlessard2670 6 лет назад

Awesome video!! Thank you! I only have red sauce... an I use that one for everything or shimano grease is a must?

@lespaulguitarist92 6 лет назад

got a question.. why do you grease the paper washers?? i thought they were suppose to grip the metal ones so you'll have proper drag?

@uldricdaigle3400 7 лет назад

OK.just find your videos todays watch them all .Great videos .Can you tell me where you get the oil your using .YOU DID A GREAT JOB ON THOSE VIDEOS WILL TRY TO DO MINE NOW .....ty very much for charing

@TackleJunky81 7 лет назад

Usually Bass Pro or Tackle Warehouse.

@carnufiasfishing8444 6 лет назад

I have a question & i know it might sound dumb but will this work for a Black Maxx baitcaster & Lew's Mach Speed Spool 2 . Like the channel & just became your new subscriber.

@AnubhavAnkitGeorge 5 лет назад

Very nice tip sir, I m from india and here I go for snakehead fishing 3-5 days a week for 2.5-4 hour. Sir my baitcasting which is Abu Garcia black max and Kastking Royale Legend. Both are now not so smooth I did oiling and greasing too. How and what reel part I do have to change or to get it as smooth as they were in new. Those are not more thank 3 year old reel. Plz respond me sir.

@danielhenderson6250 7 лет назад

when I put mine back together the handle is really tight, how do you put the star drag back on properly?

@TackleJunky81 7 лет назад

Depends on the reel. Some screw on and others you have to hold in place until you get the handle on.

@armandogzz661 8 лет назад

Excelent video, muy detallado...

@TackleJunky81 8 лет назад

Thank you!

@armandogzz661 8 лет назад

Hola, tengo un reel ardent 100 que no se como remover el spool para darle mantenimiento.

@JoeNajorFishing 7 лет назад

I hope I'm not asking a previous asked question. Can you explain how you vibrate the parts? I know you mentioned that you use a hair trimmer? How does that work? Thanks in advance.

@TackleJunky81 7 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DvUq-lmGq_0.html

@JoeNajorFishing 7 лет назад

Thank You very much. Love the channel.

@Glennmc7 Год назад

Do you have any liquid solution for soaking and cleaning old grease on gears.

@ethan7575 6 лет назад

I have like three extra washers

@zacktucker4779 6 лет назад

my handle was lose afterwards

@christianowens9474 7 лет назад

You're are truly awesome at this. I have a quick question, my reel has sort of a buzzing sound when i spin it really fast and let it fly. Is this normal? It's a Bantam Curado(Shimano in other words)

@TackleJunky81 6 лет назад

I'm sure it's just bearing noise. Nothing to worry about.

@skubadoobie 7 лет назад

Was wondering if you could help me. I bought a used pinnacle that was seriously dirty, was used for salt water fishing. I cleaned it, greased it, oiled it up. Followed your vids as much as I could, mine had a few less bearings and washers. Long story short, after I engage the real when I spin the handle it doesn't pop back into position. Besides my trouble your vids have been an immense help. First I had a dirty real that felt sticky, now I have a smooth clean real that doesn't function. If you have any tips, thanks

@TackleJunky81 7 лет назад

skubadoobie I believe you have the metal washer that's under the main gear upside down...flip it over.

@ameerihsan3241 7 лет назад

Awesome video.but i have one problem. I assembled my reel properly, but when i wanted to put the side plate back on (the side with screws) the shaft couldnt turn. How to fix this?

@newhunter621 5 лет назад

Do/will you service other reels? I have a Quantum baitcaster and Lew's baitcaster I would like to have cleaned and tuned up.

@TackleJunky81 5 лет назад

I don't, but my buddy does. Look up Trey Harpel on Instagram.

@newhunter621 5 лет назад

@@TackleJunky81 ok. Thank you!

@skeeterboy77 5 лет назад

newhunter621 shoot me an email... nitroman77@gmail.com

@newhunter621 5 лет назад

@@skeeterboy77 email sent. Just saw this response. Sorry sir.

@straightupjacked 10 лет назад

What reel was that. Whatever it is it is a sharp looking reel.

@TackleJunky81 10 лет назад

That's the Bass Pro Shops Rick Clunn Signature Series Reel...it's been discontinued for a few years now.

@straightupjacked 10 лет назад

I'm gonna see if I can find one, haha. Thanks for replying man.

@Sphelpsx 9 лет назад

well done mate, very nice, informative video, definitely will come in handy for many people, how do you like those BPS reels?

@TackleJunky81 9 лет назад

Thanks man!! I have recently sold all of my reels to switch to a different company, but it wasn't because of any quality issues with Bass Pro. They make a solid reel for sure and one I would definitely recommend. Thanks for watchin!!

@Sphelpsx 9 лет назад

have you ever tried okuma before? i have the helios, and it preforms flawlessly, although i did throw 68 huddleston swimbaits on it for a while, that was too much for the reel but it still preforms outstanding, and for a $200 reel that's pretty good, smooth like butter and cast a mile, i'd like to try the helios air next, only 5.9oz, that's pretty good

@TackleJunky81 9 лет назад

I have not. I have a couple spinning reels coming in from Okuma to try out, but no bait casters.

@Sphelpsx 9 лет назад

you won't be disappointed with okuma, trust me

@robblowe8525 5 лет назад

I have an old Abu Garcia ultra mag and I took it loose and I can't get it to work any info would help

@troylowther3411 4 года назад

Good videos however sometimes there are bearings in the handle knobs.

@ethancarter1924 7 лет назад

I broke my reel when I took it apart and I put it back together and the drag won't work

@rousefire 5 лет назад

How tight do you screw the star drag down ? I just did my Johnny Morris reel and destroyed a fiber drag washer . I have no idea how I did it unless I screwed the star drag down too tight .

@TackleJunky81 5 лет назад

Just till you feel it's snug...you have to tighten it down to a certain point to get the handle back on. No clue how that would destroy a drag washer...

@dedwards0117 8 лет назад

Thanks for the videos! Why do you grease the drag washers?

@TackleJunky81 8 лет назад

+DisplayName01 To ensure a smooth drag.

@BigBassin 10 лет назад

ok, I did all these steps and put it back together.. but when i turn the handles the spool does dont move yet the worm gear moves? help please

@TackleJunky81 10 лет назад

When you push on the thumb bar and then turn the handle does the spool engage? If not then the washer with the teeth that I mentioned that is under the main gear is probably upside down. If that is not the case then is your drag all the way loose? Check those things first and then get back to me if you have any further issues.

@lynnstephenson7432 10 лет назад

Great video. Do you oil brass bushings on reels that do not have bearings?

@TackleJunky81 10 лет назад

Thank you and yeah I will put a drop of oil on a swab and then wipe it around the bushing.

@lynnstephenson7432 10 лет назад

Thanks for the response. I have learned a great deal from watching your videos. They gave me the knowledge and courage to service my own reels. Looking forward to seeing more. Regards, Lynn

@TackleJunky81 9 лет назад

That's great Lynn, glad my videos helped you out. Appreciate you watching!!

@jville533 3 года назад

TackleJunky, where did you get your oil applicator bottle. I got my hot sauce oil and grease yesterday and the oil tube applies way to big of a drop of oil when applying it to the tiny bearings on the reel.

@TackleJunky81 3 года назад

That's what my oil came in.

@jville533 3 года назад

@@TackleJunky81 I found some of those bottles at the Hobby Lobby today, thanks anyway.

@ericramos9187 7 лет назад

Do you oil or grease that tiny bearing on the outside of the reel in the left hand corner next to the spool when opened?

@ericramos9187 7 лет назад

Because my lews tourn. Mb has a extra lube port on the brakes and it looks like Grease brand new out of the box?

@robstan2772 8 лет назад

great video. thanks for the help. what do you do to a baitcast and spinning reel when you first get it? In terms of lube/maintenance as I have read factory is not good for long term.

@TackleJunky81 8 лет назад

Some I'll fish with for a little bit until they feel dry and others I've cleaned right outta the box. Depends on the reel and how it feels

@robstan2772 8 лет назад

Thanks again for your help. Good info in your videos. Tight lines.

@robertblackburn7740 5 лет назад

So ..how much do you charge to do a reel? My fingers are not that nimble anymore.

@TackleJunky81 5 лет назад

I only do my own, but a buddy of mine does it for a living. Thkustoms.com or you can hit him up on Facebook...Trey Harpel.

@backwoodsmedic1142 2 года назад

I know this video is older, but can Hot Sauce grease be used in place of the Shimano? Will it negatively affect performance?

@TackleJunky81 2 года назад

Not that I've noticed. I used to use it for everything in the past, but I didn't want it to dye the drag washers red.

@backwoodsmedic1142 2 года назад

@@TackleJunky81 Thank you! Your video gave me the courage to tear mine down.

@robertbrandywine 11 месяцев назад

30:00 Don't the teeth point at you on one side of the shaft and away from you 180 degrees around? I think the specification should be the teeth need to be pointing clockwise or anti-clockwise depending on whether the reel is left-handed or right-handed. Also, you just dropped the rachet down on the shaft. You have to engage the rachet with spring-loaded arm (pawl return) beside and under it, otherwise your thumb bar won't pop back up when you crank the handle. This video shows the interplay: ru-vid.comOy7z28E3w7w Overall, though, a great series of videos!

@zzzdom8601 8 лет назад

You Prob just saved me from spending 100$ thanks

@TackleJunky81 8 лет назад

Thanks for watching!

@ej1295 9 лет назад

Do you store the reel with the drag loose or tight?

@TackleJunky81 9 лет назад

+Efren Tumbaga Loose so the washers have a chance to expand.

@bigpoppaproductions5986 3 года назад

could u send a link of the reel price and would u recommend it ? i have a $150 total.

@TackleJunky81 3 года назад

shopkarls.com/shimano-slx-baitcasting-reel If you become a member you can get that reel for 80 bucks. It's a free 30 day trial. If you choose to do that please go through this link gokarls.com/TJ81

@malakimetcalf7281 7 лет назад

OK I done everything and my drag star like when I tighten up the tension it stays against the plastic and doesn't spin fast it just stops but when I loosen a lot it spins smooth any thought please

@TackleJunky81 7 лет назад

Not sure what you mean?

@1sayisuggadaddy 8 лет назад

Do you service other people's reels? If so how do i get a hold of ? thx

@TackleJunky81 8 лет назад

+john clark Hey bud, I don't but Trey Harpel does and you can contact him on facebook or his website threeltuningandcleaning.com

@1sayisuggadaddy 8 лет назад

Man really wish you did after watching that video. .awesome video btw.

@TackleJunky81 8 лет назад

I get asked that all the time. I spend about a few hours per reel...that's how picky I am...and there's now way it'd be worth my time to do someone else's. Trey does great work and he's a good friend of mine.

@ethan7575 6 лет назад

My reel is nothing like that and I don’t know how to put it back together

@ethan7575 6 лет назад

But then again it is a 40 dollar baitcast reel from Walmart

@jonpatrickpowers3044 8 лет назад

When I turn the Handel my main gear doesn't spin. Please help

@TackleJunky81 8 лет назад

+Jon Patrick Powers Was this reel taken apart?

@vanhaskonari 8 лет назад

What is difference between hot sauce grease and shimano grease?

@TackleJunky81 8 лет назад

+Kanki To be honest I'm not sure on the difference between the 2, I use the Shimano on parts that i don't want the red dye on.

@vanhaskonari 8 лет назад

+TackleJunky81 I see. I'm going to service my baitcaster for the first time and these videos show me that it's not so difficult. So huge thanks to you! :)

@TackleJunky81 8 лет назад

No problem bud!