No video :(

Make A Cheap DIY Wheel Dishing Tool For Under $5!

Подписаться 489 тыс.

Просмотров 91 тыс.

50% 1

I show how to make an easy homemade wheel alignment gauge (dishing tool) for less than $5. This tool is used to check the dish of the wheel, or how well it is centered between the dropouts. It's an essential tool if you want to build wheel. Not everybody can afford a Park Tool WAG-4, or may want to spend that much for something they may use only once or twice. I made this from a piece of 2x4 board and a bolt. I used power tools in the video, but hand tools can be used also.
▶ Homemade Bike Tools: bit.ly/DIYBikeT...
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJThe...
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikegu...
▶SHIRTS
bit.ly/RJBikeGu...
▶WEBPAGE
www.RJTheBikeGu...

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 132

@RJTheBikeGuy 5 лет назад

For more bike repair videos hit the subscribe button ► bit.ly/SubRJTheBikeGuy

@derekpoosbug 5 лет назад

Just something I wanna toss in, make sure your board is straight and not bowed at all. The straighter the better.

@mikeh6286 5 лет назад

I just use two cups on a flat surface and rest the wheel on them. Then I stack some items up to the axle (inner surface). Then by turning the wheel upside down you can see how big the gap is and try make it equal. 👍 If I were building wheels frequently then this tool would save some time.

@luiscelada7644 4 года назад

that's brilliant, thanks!

@battistaverardi1240 3 года назад

Yes workes perfectly, thank you.

@ghidfg Год назад

genius

@Alexpicardo 4 месяца назад

Holy McMoly that worked !!!!!

@CedarPinesFieldGrove 5 лет назад

RJ you're the best! $60 for a tool(that I seldom need) at my LBS, $30 for a service I could perform myself, $5 to make a tool to enable a DIY job! Priceless!

@paulb2995 4 года назад

Basic dude stuff YT channels: Bikes- RJ the bike guy Cars- Scotty Kilmer Cooking- Adam Ragusea Keep the list going, all of us could use it!

@RJTheBikeGuy 4 года назад

I like Eric The Car Guy and ChrisFix for cars. SamuraiGuitarist for guitars.

@paulb2995 4 года назад

@@RJTheBikeGuy Eric is good too!

@boracay12 3 года назад

"Project farm"for incredible product tests . THE best .

@B_COOPER Год назад

@@boracay12we’re gonna test that!

@johng9971 4 года назад

I made the dishing tool, but was not happy with screwing the 1/4" bolt direct to wood. I lined the outside and inside with a couple of bits of scrap metal. Bits cut from a baked bean can were used - glued on. You could use thick brass, which would reinforce the tool at its weakest point. I then drilled a 1/4" hole through , and used two washers either side of the hole, and with a nut either side. I used my grinder to grind the end of the bolt to a point, so it is easier to see the gap. Didn't even spend 5$. The wood was scrap, the metal came from a can, and I used an old bolt. Works perfectly

@alonzocalvillo6702 4 года назад

Thanks to you ,I was able to make my own from scrap wood and use it when I laced my own rims.I also made my own truing stand , derailleur hanger straightener and bike stand all from videos.

@pinoyeh 5 лет назад

That $5.00 DIY dishing tool is great than the $60 cheapest tool you can get. I am going to make one tonight as I still have some 2 x 4's kicking around.

@pershorebikedoctor5974 2 года назад

Thanks for this. I took the basic idea and modified it a little to suit material I had laying around the workshop. It works great and cost nothing more than an enjoyable hour of my time.

@cup_and_cone 5 лет назад

Worth mentioning to use kiln dried lumber! Use wet pressure treated and when you re-use the tool in a year it will be twisted and hard to get it aligned straight.

@Hardi26 5 лет назад

Upgrade it with another piece of lumber so that it crossing the tool at one end. That it would become like a capital letter T. That way your tool will have always 3 points touching the rim and the screw to locknut.. So 4 points all together. This way, it won't matter how twisted the lumber is, or even whether you drilled the hole straight. Also screw wood screws to the ends of that cross beam, so that heads of screws would left stick out some millimeters.. They help you to guide tool when measuring, that your tool touch the rim with same spot on both side of wheel.. Also you can hang the tool on rim by those screws.. and measure no handed.. By only holding wheel And other hand is free to adjust the measuring bolt.. I did mine this way because I'm not good at precision in building things. And lumber I had was also not straight and good.

@tcrwild8422 8 месяцев назад

Great idea .. You can make your own alignment tool also for the hub centering i use a wooden yard stick drill a hole in the end to match your skewer thickness exact then place the skewer thru the hole at end of stick lay wheel flat on wood to get hub off ground spin the stick an this will reveal your hub alignment if you have wheels that ain't spinning proper hop in the wheel this will give you a better idea of where the problem lies easy method for gettin roundness back as this part van be a pain in the azz this way works better for me then a park dishing tool far as getting my wheels round as you simple spin the yard stick an it will reveal all at once

@MjPersonal 8 месяцев назад

I just love effective, easy-to-build tools! Why cough up big bucks for a brand name when this tool does the job just as well?

@BikeItUK 5 лет назад

Another helpful and money saving video great work as always. Thanks Andy

@RJTheBikeGuy 5 лет назад

Thanks!

@rustemkurtcu8920 5 лет назад

Thank you, this will be my third handmade tool 3rd. Grettings from Turkey. 😉

@RJTheBikeGuy 5 лет назад

First!

@dereksmith3632 5 лет назад

That was cool 👍

@DODOBC2476 5 лет назад

Insider trading.

@RJTheBikeGuy 5 лет назад

I know RJ The Bike Guy's wife...so...

@mattgies 5 лет назад

This is the one and only time I've given that comment a thumbs-up.

@Name-bf3zm 5 лет назад

dislike

@CykelSierra 5 лет назад

Very nice! My bike came out of the manufacturer with a messed up dishing. Now I can fix that! Greetings from Brazil!

@jptrainor 3 года назад

Nice. I think I'll make one. I'll use plywood so there will be less potential for the wood warping.

@AmazingChinaToday 2 года назад

Great idea, especially because this tool is rarely used by most bikers at home.

@hyper_focused_man 2 года назад

Very interesting! Really good that you mentioned alternate tools for the electrical you used in the video. I didn't know there existed these kind of alignment tools. Awesome. I should build one.

@AmmiHamzah 5 месяцев назад

i love rj the bike guy

@pixbyparis 4 года назад

Thanks RJ So Gonna make one of these up - fantastic plan and i love your channel. My go to for repair vids - thanks for them all :)

@ToomeyDuong 4 года назад

You are Great! Merry Christmas.

@crocodilecrox3758 5 лет назад

RJ saves my money. Love you man!

@GiGaSzS 4 года назад

Awesome diy tool, and probably better quality than any of cheap alternatives. One thing to improve only: I would ask someone with table saw to straighten the long edges so they are 100% straight and parallel.

@gleaminthecube2002 Год назад

Thanks RJ, just finished making one to your spec, works a treat 👍

@bleednate 2 года назад

Great video. Thanks.

@cormacdoolin9904 2 года назад

What is the purpose of cutting out the circle from the 2x4 ? Why not just cut a rectangle saves a lot of time..

@wherewelove 10 месяцев назад

Thanks, so great!

@ianvirco5897 5 лет назад

When i built Cycle wheels i used another trick, it was always a nuisance to keep taking the wheel out of the stand to check the dish, so i measured the distance over the lock nuts, divided by half and wrapped some tape round the hub so one edge of the tape was at half distance, then i could look through the valve hole at a spoke nipple opposite checking the edge of the tape was on the same alignment.

@pershorebikedoctor5974 2 года назад

Yes! I do the same. It's great for initial dishing and then there's only a 1 or 2 mm adjustment with the gauge..

@Jose-bm9rf 4 года назад

Gracias por el video buen trabajo Thanks for the video good work Best regards from Spain

@laszlo9285 4 года назад

God bless this guy.

@reassimilated 5 лет назад

Have you ever shown your face in any of your videos? I've seen the lower half in a couple of them. Reminds me of Wilson from home improvement lol.

@sahilmesa2914 5 лет назад

Great tool

@deltafour1212 6 месяцев назад

When using a Wheel Dishing Tool why do you measure on the lock nuts instead of on the cup of the hub? Wouldn't the cup be more accurate in terms of the hub being center with the wheel?

@andris2345 5 лет назад

Hey RJ can you build wheels? It would be great to see you building some sweet wheels

@Bikeops2021 5 лет назад

Awesome video it's so simple it would be silly not to make one, great to see you guys still using imperial sizes reminds me of my youth, damn metric system sucks! thanks for your time RJ..

@Bikeops2021 5 лет назад

@Yard Sale Dale Yeah I use both mate, imperial when I'm doing something on my own & metric when I'm working with young guns.. 😂

@sarangparmar9785 2 года назад

Now it's time for dit truing stand

@craig11152 5 лет назад

I would say to anyone who doesn't have the basic tools we saw.... jig saw, cordless drill, miter saw, etc to start acquiring them. One can't be a DIY guy or gal without tools.

@trekkie9942 5 лет назад

I've wanted to make one of these for awhile. Thanks!

@federicopresti 5 лет назад

I'm definitely making this! Thanks a lot, your videos are awesome.

@user-lg4xp4tv8y Год назад

RJ The Bike Guy, it is a great

@Carlos-the-cyclist 5 лет назад

Thank you RJ for this video. I will make one just to have

@1zanglang 5 лет назад

I made one myself. Great idea.

@that70sschwinn 5 лет назад

Very nice... a handy and inexpensive DIY tool...

@Humming3ird 5 лет назад

Hey how do you true your wheels? Any tips on how to do that at home or a homemade truing stand?

@RJTheBikeGuy 5 лет назад

I have a Park Tool TS-2 professional truing stand. But here is how to do simple truing without a stand: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f1SHmFBihKM.html

@sonnyjimm23 3 года назад

3:07 " if you live in a country that uses metric"....LOL so that'd be every country accept the U.S, Liberia and Myanmar. Made me laugh, appreciate your videos mate 🤙

@boracay12 3 года назад

I thought USA was the only one who does not use metric .

@VegasCyclingFreak 5 лет назад

Great DIY version of that tool and dirt cheap

@ARES1658 5 лет назад

Greetings from Perú !!!

@denishuber7758 5 лет назад

woodworking with RJ... interesting as ever... im gonna try that one...since i`ve learnd on my rear wheel how to actually true a wheel... it might be off to one side.. i can see it on the vbrakes...when engaged they not symetric to each other...i hope its fixable...

@RJTheBikeGuy 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H9awzivP36w.html

@tonysworkshop2558 5 лет назад

Thanks! I needed this tutorial 👍🏼

@roncooke2188 4 года назад

Interesting i notice you have plenty of handy tools and not only for bikes.What do you do when the wood gets worn and the bolt keeps dropping out may be new hole next size

@RJTheBikeGuy 4 года назад

Or make a new one.

@Ben.N Год назад

@ninjazzrhythm400 2 года назад

Is that a miter saw? Looks like a chop saw?

@nguyenhuuthien1961 4 месяца назад

TKS

@joxe3 5 лет назад

Amazing. Can I use it for a boost wheel?? Thanks for your lessons

@RJTheBikeGuy 5 лет назад

Probably.

@dereksmith3632 5 лет назад

I have a 60s stuck on headbadge covered with one pass of black spray paint, can I remove the thin coat without damaging the badge. I'm thinking about thinner but I'm not sure. Great vid.

@RJTheBikeGuy 5 лет назад

I don't know. Maybe a heat gun.

@dereksmith3632 5 лет назад

@@RJTheBikeGuy Thanks, I just got the pair, men/women, They're in great shape but were painted. I hope you have a vid on rebuilding coaster brake hubs. These are my first real restoration projects. Thanks again for your time.

@dereksmith3632 5 лет назад

@@RJTheBikeGuy You are the man, I used a hair dryer on the headbadge for 20 sec. Then slowly sanded it with 600 g. The bikes are Mohawk made in N.Y. thanks a million for the idea.

@RJTheBikeGuy 5 лет назад

@@dereksmith3632 Glad it worked!

@uiriybond 5 лет назад

nice idea. thanks.

@erdbeeren3241 2 года назад

Is a dishing tool really necessary? I mean if you true the wheel correctly, it should be in the middle right?

@trekkeruss Год назад

Coming in very late here, but a wheel can be true but out of center. That said, a dishing tool/centering gauge is rather a luxury item; it is not needed to guage centering. Turning a wheel around in a truing stand or in the bike will also show if a rim is not centered.

@TopseyKretts 5 лет назад

..Brilliant!....That's R.J...

@vanwilder1101 Год назад

Have you gone Metric yet RJ??

@carlobravo9531 5 лет назад

Thank you sir ,

@garcislife306 5 лет назад

I want to see your new bike videos

@Alion.147 5 лет назад

hello my friend, just a quick question please. In order to center the rear wheel, where should I put the screw ? at the edge of the hub, the axle, or the freewheel ? I hope you answer me as quickly as possible Thanks.

@RJTheBikeGuy 5 лет назад

On the locknut the makes contact with the dropout.

@MrJay_White 5 лет назад

if you use a power screw driver to screw the bolt up and down a lot, the friction will create a heat polishing effect in the wood that will give you good threading and good tension. this isnt a thing i "know" though. its a tip i got from elsewhere.

@bonzobanana1 5 лет назад

Another useful video although I think the screw needs a wing nut or something to make it easy to turn by hand. If you have folding bikes with 20" or even 16" wheels I guess you would use those wheels for the template. Not a lot of folding bike content on your channel by the way unless I've missed it.

@RJTheBikeGuy 5 лет назад

For the most part, folding bikes seem to be mostly regular bikes (often low end), that fold. So most of the stuff is the same.

@bonzobanana1 5 лет назад

@@RJTheBikeGuy Quite a lot of premium folding bike brands and issues specific to folding bikes. Hinge for example. Sometimes the hinges fail and parts are not available easily so a DIY fix is required. Dahon is notorious for bringing out yearly updates and not providing spares for older models. I accept that most issues are the same but I guess it would be nice just to see you buy a rough one and see you improve it.

@joekahno 5 лет назад

It helps to wax the bolt.

@Ravi-we7tm 5 лет назад

Nice bro it's useful

@IvansBikesBmws 5 лет назад

Good stuff!

@montanajones8393 3 года назад

Another great video but unfortunately with the lumber shortage this year...that $5 tool now costs $90. Ha, ha...what a strange world we live in presently.

@GibboTraining 5 лет назад

Here!

@gregbingaman2092 5 лет назад

Nice!!!

@colinc5283 Год назад

"I use inches because USA!" Proceeds to measure dishing in metric. Just joking around. Thanks for the good video.

@mixtemixte2545 5 лет назад

Hello RJ, Do You use multitools? Can You recommend some? best wishes

@RJTheBikeGuy 5 лет назад

I have a Crank Brothers multi tool. There are lots of different tools. Find a quality one you like.

@mixtemixte2545 5 лет назад

@@RJTheBikeGuy Thank You !!!

@sun27g Год назад

awesome...that's a mockery of paying for a high end wheel dishing tool 🤣

@ansh_thepro 5 лет назад

Niiiiiiice!!!😊

@TK-cp9fz 5 лет назад

RJ, you need a work bench. It'll make your life so much easier

@federicopresti 5 лет назад

I'm worried that the bolt might loosen up over time so I might glue a nut to the wood with epoxy or something

@RJTheBikeGuy 5 лет назад

I think it would take quite a while, if it all. But hey, you could always cut another piece of wood. I bought an 8 foot 2x4 for a couple bucks and only used 26" of it.

@federicopresti 5 лет назад

@Yard Sale Dale yeah that's a good idea

@shaun5427 5 лет назад

I aways use my thumb on the frame

@garcislife306 5 лет назад

More new bikes

@atelierunterderteck7583 5 лет назад

Good idea, but you should use a wider piece of wood. It won´t be stable for a longer time if you leave only such a little bit compared with the length of the tool. If it was 1 inch wider it should be fine, you had to use a longer bolt, that was no problem. The best solution would be to use hardwood or plywood.

@RJTheBikeGuy 5 лет назад

It's as wide or wider than the Park Tool.

@atelierunterderteck7583 5 лет назад

@@RJTheBikeGuy Yes, but the Park tool is made of metal. Wood does not provide the kind of stability metal does, especially if humidity changes. The danger is, that the gauge looses its alignment. You may avoid this by leaving a little bit more of material.

@RJTheBikeGuy 5 лет назад

Doesn't matter if it changes a little bit. It isn't going to change between measuring from one side to the other.

@DODOBC2476 5 лет назад

@@atelierunterderteck7583 It only takes a few seconds to flip from one side to the other. It won't change in that time.

@atelierunterderteck7583 5 лет назад

@@RJTheBikeGuy ...ooops, you are right. Sorry, I had a bug in my thinking :-)

@bitsabikes1687 5 лет назад

👍

@bitsabikes1687 5 лет назад

Got a question about dishing wheels. When/how to know to correct by spoke adjustment or by adding/removing spacers/washers from either side of a rear wheel?