You bet! Thanks for the kudos. I try to be as creative as possible, each project is usually a first for me...so there is always plenty of 'on the fly' thinking happening LoL.
That’s wonderful, email me a pic OK, I will be sure to include you in this months Maker Awards. Same goes for anyone else who made a project. Makingmakersdiy@gmail.com or through Facebook @MakingMakersDIY
Thanks a ton for showing us the how to! your instructions are so clear and the cut is just perfect. You made our day with the plan! keep creating more!
Thank you first of all for sharing... I love the design. I plan to build this but add wheels (heavy duty) to create daybed(mobile) in the sunroom for easier cleaning. Let me know if you have recommendations/ modification.
This is awesome, really appreciate the plans shared, cut list etc...just started to build the same and can you pls clarify the below, 1. You cut 2x6x8 into 3 pieces (2 were used). What was the size? 2. You made holes to 4x4 (vertical ones) to join, what size of the bit you used? And what size of wood you used to close the hole? 3. What size of the nails/screws you used for pocket holes? 4. There are items missing in your required list. You may want to add them so that we can be ready when starting the project (wood glue, clamps, all materials for staining etc)
Fun World, so happy to hear from you and that you want to build one of these. My intent when making this video was to show how something like this could be done, I can see that more step by step w/ details may help you guys. Do you think I should make another video? I was using what I had laying around, so for the inset holes I used a bit the matched the 1in dowel rod I had on hand. But you can use whatever just make sure it is larger than the screw head and you should be fine. For the 2x6 question, thinking off the top of my head, 1 piece was used per side, minus the front. If there is a mistake in the cut list, let me know and I will update. For Kreg pocket holes, I use Kreg pocket screws...which were 2.5” in this case I believe. Hope that helps. Will check back tomorrow to see if u have any more questions
One concern that I have is with the threaded eye bolts on a build this heavy. The ones you used from Lowes (Hillman brand) have a straight load capacity of 320 lbs. At an angle of 90 degrees that capacity diminishes to 25%. I would therefore recommend using a shoulder bolt with a nut through the 4x4 (they have a capacity of 2000 lbs and more)
Nice project. I've been thinking about making one for my outdoor covered "cabana" type structure. Two questions: 1. How much would it weigh? I plan on using dried douglas fir for the 4x4s, 2x pine for the rest, painted. I also don't plan on leaving it outside all winter. 2. What to use to cover the mattress? I built some swings for that spot over 15 years ago and the fabric is still doing good.
Hi Bruce, I can’t remember weighing everything but it is heavy and sturdy. My swing is under a covered porch so no need to protect it, I am sure you can find some outdoor furniture covers that could fit. Let me know if you need anything else. Best of luck with your build!
Mike, this is an awesome plan. making one right now will keep you posted. Planning to hang on 2x6 on my Pergola (hope it's not too heavy). Mind tell me what kind of rope did you use?
Sure, it was marine rope. I think there is a pic on the last page of plans that can help you type the right terms/size in Amazon. If you don’t see it, just email me makingmakersdiy@gmail.com good luck Justin!!!
This plan looks really great. I am planning on making this. What is the diameter and lenght of the wooden plug you have used to plug in the holes? Also what size and kind of screws you have used on the top portion of 22 inch 4x4 ( for the two screws)?
Hey RS, good question. My latest plan for a different yet similar design had some details that may help. Check out the second to last page of this www.making-makers.com/wp-content/uploads/2021/04/MODERN-PORCH-SWING-4_27.pdf
This was an awesome video! Great job on everything and thanks for making it and the cut list! Have you had any issues with the eye bolts on the swing bending? I'm wondering if it would be better to extend those 4x4's out and run the eye bolts vertical?
Thanks Jason. No bending issues at all but check out my crib mattress porch swing video. There I used a verticals eye screw placement which works great too. Let me know if you have any other questions!
Hi Making Makers, Great build and lot of thanks for detailing out all the steps for the beginners like me! I have one question for u! 1/2- in x 6'-in eye bolt comes with a nut , right? Why do we need to buy extra Hex nuts? Do we use it somewhere else? Do we need to do anything extra [like locking nuts] from preventing those nuts to come out? Any idea on how many adults [or lbs] this swing can hold? Thanks again. Great effort!
@@MakingMakers I was referring to eye bolts that goes into ceiling. Can I use this eye bolt instead for ceiling? www.lowes.com/pd/National-Hardware-1-Count-1-2-in-to-13-x-7-84-in-Galvanized-Uncoated-Steel-Shoulder-Eye-Bolt-with-Hex-Nut/1000390687 Also could you please let me know the length of 1/2-in eye screw that goes to side of the bed. [is 4'' enough?]
Just saw this question, 4in is fine. For the ceiling it just depends if you are going straight into joists or to a block. The Lowe’s pic is more for a block but that might be what you are going for. If going into ceiling, you would want like an eye screw. Hope that helps. Sorry for any delay.
The swing looks perfect! My husband and and I are about to dive-in to make one! Could you repost the link to the cushions? It was broken. Did you use a standard twin mattress and cover it with a waterproof cover first?
Hi Sarah, thanks for letting me know about the link...I will find an updated one and send you as well as update the description. So excited you and your husband are going to make one. We used a standard twin. You can just use regular twin sheets or you can first put down a cover. Totally depends on how messy your husband is JK LoL.
This is driving me nuts...I admit I am spacially challenged...so...here is my query...When you attached the back 2x6 across the base you attached it on the outer edge of the 4x4....what did you do about the 2 inch gap that was between the 2x6 and the base of the bed....I just can't seem to grasp where that gap went to on yours....sorry about what may appear to be a stupid question but this is baffling this old man...thanks...Butch
Not a stupid question, I was agonizing about the 2 inch gap as well. The video skips over that part. Turns out that gap works well for my standard twin mattress and doesn’t look bad.
I want to build a swing with no beam. Just two posts and a short L shape at the top to hang the swing. I found an L pergola extension but not sure if can handle the weight and it won't bend. Any ideas?
Hi Storm, sorry for the delay. Can you shoot me an email with the link to the product (pergola L extension). makingmakersdiy@gmail.com. I will take a look. It certainly is an interesting idea, I would have the same initial concerns as you. Good question and thanks for posting.
Hi Pappa, thanks for the reminder. I keep forgetting to show that in slow motion. It is in the video but I can do a quick tutorial video on just the knots and post. Stay tuned! Thanks again
Hi Matt, sorry for the delay. I check my makingmakersdiy@gmail.com inbox regularly so if you have any follow-up questions, hit me up there. As to your rebar question, that goes with the 'modern porch swing bed' plans. I see you are posting under the original one I made that doesn't use rebar. I may be misunderstanding your question or have a typo in a plan. Plz advise, thanks Matt!
Jason, great question. It is a standard twin mattress. I touch on that point briefly in the newest video I posted today found at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html Regarding the cushions, we got them off Amazon...they are legit... here is the link www.amazon.com/dp/B07J5S2KGL/ref=cm_sw_r_fm_api_i_u-lOEbT4WEPYC?fbclid=IwAR07-P7EKoSgXSXq6SgPrQ3KOcF8vh8Qu81X3jUt0AN_gV0mw6yo1EViXwY
Hi Muhammad, I made mine out of pine/fir and finished with stain & shellac. Since it is in a screened in porch it is holding up just fine. If ur swing is going to be pretty exposed you could do a few things. You could use cedar wood, I don’t see why you couldn’t use Pressure treated (PT) wood...although as it dries it might twist on you. I made another swing for my front porch that gets some rain and the outdoor paint I used is working fine. Just my 2 cents...let me know if you need any more help! Can’t wait to see it.
Maybe I missed it. I looked at the PDF. I didn't see the dowls, or the size of the wholes. On the top posts, 3 holes went in the bottom and 2 at the top but, looked like different sizes and different screws.
Hi Downing, thanks for your question. I tried to reply earlier but I don't see it here. I often use the Kreg drill bit to create insets that I can then use various sized deck screws in. The Kreg bit is 3/8 so just use 3/8 dowels to hide your screw holes. Hope this helps, modify any way you like. Cant wait to see pics, if you have any more questions, email me at makingmakersdiy@gmail.com. ~ Mike
Thanks for the kudos Diana! The bed is solid, so no worries there. Pay attention to any printed hardware (chains, hooks etc.) limitations. Should say on the side of whatever you buy. Also be sure this hangs from a strong mounting point like a beam or joists. If unsure, a handyman could do it. If you make the porch swing bed, send me a pic ok! Makingmakersdiy@gmail.com
Hi Devin!!! Thanks for your interest in that. Happy to report I generated a cut list for this, I am pumped others would look to make something like this. Check out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html
I took a look at your material list, approx how much did this cost you? I am assuming price will vary depending on location and resources available. Thanks!
Hi Tammy, a trick I like to do is go to (for example) Lowes.com and start shopping...keep adding the items in my list and click checkout. From there you can can see the total + taxes and you can email it to yourself. Then just remove the items from the cart. Just my two cents.
Hi bass, I lightly sanded everything and used dowel plugs for screw holes...I can’t remember if I used wood filler...I am thinking maybe I didn’t since I was going to stain. I’m sure you could though.
Hi John, since this project is under cover I used regular pine/fir and applied stain and finish. So far so good. If I was making one that was exposed to the elements a lot more, I probably could have used cedar, redwood, or pressure treated. if you check out my crib mattress porch swing video, I used the same wood as the twin project but painted with an all season white paint that has really impressed me so far. Just some things to think about, hope this helps and good luck with your project John!
93BB, I got you. Here is a video that should answer your question, but you can also get the cut list and materials pdf off my website www.making-makers.com Let me know if you have any problems!
Hey Marky Mark! The clear stuff was denatured alcohol...it thins the shellac and helps prevent brush marks. Totally optional. Good luck to you and the Funky Bunch!!!
Hi David! Thanks for the comment, I just put out a video that includes the cut list. That should help you out! Go to ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html
Hi Miral, good question. I may have answered this question but can’t quite remember the answer. Scroll the comments to see if it’s there. If I were to guess right now, around 120-130#. Hope this helps! If you build it, send me a pic to makingmakersdiy@gmail.com I would love to see it! ~ Mike
@@MakingMakers it helps alot, thank you for the prompt reply. My concern is what you addressed. Multiple friends over and having 2 or 3 people sitting on it.
Hey Jon, thats a good question...nobody has asked me that before. Nope, wouldn't change anything...the twin and crib porch swing beds at my house have held up great. If I think of anything, I will be sure to reply-back.
Here is a link to the video I learned the knot from. So far, no slippage whatsoever...love this knot. If a maker out there knows the name of it, by all means share! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Eoompd1GFjE.html
James, great question. Yes, I used these: Kreg Paint Grade - Solid Wood Pocket Hole Plug(s). They definitely sell those at Lowes and Home Depot...about $6 for a small box. For other projects when I didn't have pocket hole plugs around, I simply used a 3/8” dowel rod and a Japanese flush cut saw (same saw shown in this video used to cut larger dowels). Hope this was helpful, let me know if you have any other questions James!
@@MakingMakers thank you. I made this swing out of cedar for a friend. it is beautiful. Had to purchase a kreg pocket hole plug cutter to make cedar plugs. they do not make cedar anymore.
Hi Nicole. Thanks for the question. Provincial I believe. If you need anything else, shoot me an email, I respond faster on there. Makingmakersdiy@gmail.com
Hey Rakesh, so glad you asked. Released a new video that tries to answer some of your questions, check it out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html while the video is not a full-blown plan, it (combined with the video) should help folks make this project. Once my CAD skills improve enough, I will be sure to put out detailed plans. Hope that answer is helpful. What is something you would like to see made?
Hi Ethan, Thanks for the Like. I made a part 2 that should answer your questions. If not, hit me up. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html
Floyd, I appreciate the feedback. You can find the measurements in the video I posted today! Check it out, would love your thoughts. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v79uvOtF-wE.html
Hi Mike, great video and I’m trying to follow it to get a bed swing done. Quick question though, what exact screwed eye bolts did you get and what weight rating should these be!?
