Make AMD Ryzen 5000 Series FASTER QUIETER & COOLER With Curve Optimiser

Подписаться 120 тыс.

Просмотров 39 тыс.

50% 1

#undervolting #undervolt #amd #ryzen5000 #ryzenmaster
Make your AMD ryzen 5000 series CPU FASTER QUIETER & COOLER With Curve Optimiser.
Your results may vary - and don't run it on the hottest day of the year!
Getting more for less is a rare thing these days, so getting more performance with less heat or energy is a pretty good proposition!
Today we are looking at the hottest day on record (In the UK) and trying to maybe reduce temps in the PC and not lose performance. So we install AMD Ryzen Master software
www.amd.com/en/technologies/r...
and use the curve optimiser to automatically try and dial in some more tailored settings for our combination or motherboard, cooler and processor.
YOU MAY NEED TO RUN THIS A FEW TIMES!
As we see in the video, the results in the recording were actually WORSE than our previous settings, so if at first the settings don't seem that great, try running it again. Some background tasks and other things like ambient temps and even humidity can have an effect on the results.
Overall though with the settings i have had it kept the mighty 5800x under control and with lower temps means lower fans speeds and we also were in an undervolted situation so in regular windows tasks we are saving energy and therefore a small saving in the monthly bills!
Let me know how you get on in the comments or on the discord.
Cheap Windows 11/ 10/ Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesun...
Discount code: MIKESUNBOXING 7.5% Off
Computers & Gaming Playlist: • Computers And Gaming
PC How To Playlist: • PC How To
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
RU-vid membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshirt.co.uk/mikesu...
North Americas: shop.spreadshirt.com/mikesunb...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com/shop/mikesunbo...
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus.energy/rose-gro...
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.mention-me.com/m/ol...
Pay For Items Monthly: www.shopabunda.com/?ref=mikes...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlink.com/589.html
www.premiumcdkeys.com/mikesun... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.com/?rfsn=261416...
Get in touch with us:
Email mike@mikesunboxing.com
RU-vid / mikesunboxing
Website www.mikesunboxing.com
Discord: / discord

Опубликовано:

8 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@mikesunboxing Год назад

Cheap Windows 10/Office/Steam & Game keys available from our affiliate link: www.premiumcdkeys.com/mikesunboxing Discount code: MIKESUNBOXING

@daveaitken92 Год назад

Cheers Mike! Hadn’t spotted this one being added to Ryzen master. Will check this out for sure.

@mikesunboxing Год назад

give it a go, it isn't perfect and results wary wildly but could be fun to try it

@altaporro Год назад

Excellent video. Never would have known about this, thx. I was pretty clumsy with my 5700g install, so kind of worried about the paste. Throttles on cinebench now on a cool day. But this helps a lot, thank you so much!

@mikesunboxing Год назад

Glad it helped

@Senrab46 Год назад

Interesting tutorial and surely undervolting adds durability to the cpu. So you gain performance without damaging the unit. I will have to see what can be done on my R5 3600. Thanks for reviewing Mike and Kath👍

@AuDiGo6 Год назад

Third gen ryzen doesn't support PBO2.

@Disslikeinator 7 месяцев назад

No Support bro

@kevinchristian3984 Год назад

great and informative test. One thing to note, is that the number in the Curve Optimizer setting is not the raw milivolt number, but rather a kind of multiplier, where 1 count equals 3-5 mV. so when it shows -27 you're actually offsetting the voltage by 81-135 mV, hence the massive difference in temperatures.

@amcdonald7479 Год назад

Thats interesting thanks for the info friend. My offset on a little ryzen 5600 came out -30. The results on cinebench are just over 12k multi now. Ive gained over 300 points. I also run at least 9-10 Oc cooler under load than before. Isnt -30 a bit high though? I ran the test twice to be sure and first was same. I got that offset while running pbo +200 and it sits at 4.645ghz ish and barely moves.

@xenooseater6124 Год назад

@@amcdonald7479 this isn't with the stock cooler is it

@amcdonald7479 Год назад

@@xenooseater6124 nah I through a 360 radiator on it. Overkill I know but an investment as compatible with my planned AM5 build planned for AM5 2nd gen releases .

@damird9635 Год назад

Same here, even without pbo curve optimization, 4650mhz is top for r5 5600, temps are not problem with decent cooling.... Difference between 4450 without any tuning and 4650 after many hours of tuning, hit and miss is.... Only visible in benchmarks,.in gaming, real situations etc - none. Temperatures are not an issue even with a stock cooler.

@amcdonald7479 Год назад

@@damird9635 Probably fair. I just find since I did the curve with a 360 coolcer on it the temps and cost factor are impressive. Then again not ever cpu is made equal there is a silicon lottery in there. My curve maxed without an issue I cant take it any higher, I current have an mmo running and 3 youtube windows open in 1440p and my temps 25oC.

@uglybob7505 Год назад

Interesting video, havent messed with Ryzen Master in aaaaaaaaaaaages. Some great results there from the undervolting, wonder what my 3600 can muster. Thanks Mike and Kath.

@mikesunboxing Год назад

Try it, although you might need the manual bios version of the video due soon for the 3600

@girenloland Год назад

I run my old 3600 bronze sample balls to the wall of what I could do for two years. 1.31V at 4325mhz all core. No problems at all. I swapped it for a 5600x now. Sold the 3600, and the new owner runs it the same settings without any issues... No degradation from when i bought it new. I also won the silicone lottery with my 5600x. That one I run at 4800mhz all core. (Gold sample) Can go higher when testing, but i don't want to go higher because of the voltage has to go higher than I'm comfortable with

@daddyb1483 Год назад

Many thanks: I hadn't used a Ryzen before, so it told me exactly what I needed.

@mikesunboxing Год назад

Glad I could help!

@j.williams1774 Год назад

Thanks for the informative video.

@mikesunboxing Год назад

You bet!

@pweddy1 Год назад

I saw your watch band and thought it was an ESD bracelet! HA HA HA!

@kennpng4733 Год назад

Thank you so much, Im glad i found this video. Last time i saw a video about under volting 5000 series was too technical and i cant follow everything. Im glad this video exist. Now my 5800x run cooler from 89-92c (default) to 75-79c with 14944 score on cinebench

@mikesunboxing Год назад

Glad it helped

@89MTN Год назад

thats still quite high

@michaelthompson9798 Год назад

I luv a good undervolt 🥰👍😇. No euphemisms 😝! It’s strange how overclocking was the thing to do on your pc before …. Now with hotter weather and soaring energy costs many over the past couple years have been looking at the unblocking route to gain performance 😆👍

@mikesunboxing Год назад

Very true!

@REALLYRANDOMREVIEW5 Год назад

facts i have a old Z97A and i5 4690k That was purposely built for over clocking Now its in a Box and Ryzen Getting Underclocked lol

@mikesunboxing Год назад

@@REALLYRANDOMREVIEW5 Lol!

@chris_hertford Год назад

Excellent video Mike! Any follow up vid for 3000 series? I've seen lots about undervolting cpu / gpu but not even dabbled yet. I always considered these amd utilities as bloatware but actually a decent tool. I'll be trying this with my 5800x, I've a 3900x in another machine but that looks like needs manual tuning.

@mikesunboxing Год назад

yes on the way

@arendar79 3 месяца назад

Back in 2019(20) I built my pc - ryzen 2600 on asrock b450m hdv; then I upgraded motherboard to asrock b450m pro4, cpu to ryzen 5600 and cpu cooler - cooler master tx3 evo to deepcool ag400; I watched lots of your videos to do all this upgrade. Now I'm happy with undervolt: -27 all core. You are doing great job. Thank you Mike

@mikesunboxing 3 месяца назад

thanks, very kind of you to say.

@thaluska7 Год назад

great video, thanks for it. I would like to ask what cooler you use for the r7 5800x in this test? Also how you got the power of the package be only max 110w without changing it in PBO? In default when I run cinebench r24 it will run on my r7 5800x 142w on package and temps go to 85C. I got it little byt down but need to do curve opt per core (got only -25 for all except primiry and secondary core, this needs to go down to -15 for now) and also needed to adjust PPT to 115w TDC to 90A and EDC to 100A to get lower temps. but still hit 80C. also without the limit of PPT the CPU always took 142w on package when running cinebench r23 ( multi core test). also with this setup I got only 4,4 GHz on all core in CBR23 in multicore test. thank you

@mikesunboxing Год назад

cooler was probably sahara ex360 i think at the time, not sure what other tweaks were done sorry it was a while back now

@jamestierney5568 Год назад

Need to be careful here. It's not running at full or high system load that's the problem. It has been noted that random crashes/lockups occur at low system load or background tasks.

@surfx4804 Год назад

Interesting. I did mine via the bios and testing with a little utility called CoreCycler (which uses prime95), I'll check out Ryzen Master as that looks like a quick way to get to a decent point without rebooting after each change. OCCT also will test for such errors, but I have found CoreCycler the best at finding more infrequent issues. So if your undervolt has some instability I would check it out. My own 5800x is a bit all over the place with individual core undervolts between 0 and -30 and it took a lot of testing to dial it in, even then it only supports a +50Hz clock increase as to go higher means even less undervolt, and I want more all core boost than single core Hz. PS. My 5800x can get 16k in Cinibench R23, so you probably have more to go (or are running other stuff in the background) - oh it could be temps and mine was probably on a cold day.

@mikesunboxing Год назад

mine is under performing for sure and still gets quite warm. but i keep on changing settings and the weather goes from one extreme to another

@surfx4804 Год назад

@Juri V It was totally fine and I ran it like that for well over a year as I got the CPU in April 2021. You have to put the work in the testing and back off when any error. I found other testing methods did not spot errors that Corecycler could with an overnight run. So, before I used that then yea, I found some instability when testing with OCCT. I now have a 5800x3d that I undervolt using a tool called "PBO2 Tuner" and get -30 on all cores and rock solid so far. The CPU runs at 4.45GHz all cores under full load. I did this as I managed to get a 4090 GPU but want to wait for AM5 CPUs to settle down and prices to fall on motherboards etc.. or see what 14th gen Intel is like.

@surfx4804 Год назад

@Juri V The only slight risk if you don't push it too far is if the PC crashes and windows gets some corruption. Generally, you take the undervolts a little at a time so you can find small errors rather than crash. I am not sure what Ryzen Master is suggesting so can't advise on that. Also the 5800x will always run hot and spike in temps even if you just think of running something. What you are really concerned with is temps under load that then mean the CPU does not boost as much.

@DieTabbi Год назад

@surf is there any manual or tutorial for cyclecore? My 5900x shutsdown in some games and I want to find out which core it produce. Even a reset cause shutdowns. All after playing with undervolting :-(

@surfx4804 Год назад

@@DieTabbi I did a reply but it does not seem to have posted> Anyhow there are a couple of youtube vids out there you can see people using it. In a nutshell see the readme.txt, and you need to edit the config.ini file. There are really only two settings to make in the ini file: 1 - "runtimePerCore" use 1m for quick checks then when all seems fine go to 3m and for an overnight set of runs try 6m 2 - "coresToIgnore" use this to ignore cores you know are fine, it helps when just sorting out the cores that are failing by reducing test times

@patricklebel1141 Год назад

Good video! 👍 Definitively something I planned to do for my mining rigs, as I have upgraded 2 video cards. I got a 6800xt and a 6700xt for really good price, and combined with cpu mining too, that will be something that should help on the temp side. Still too hot over here to start the work, so that will be something I will do this fall.

@mikesunboxing Год назад

hope it helps save a few $$ and keep things a bit cooler

@TranceHistorian Год назад

Ahh you're the reason why I paid £400 for my 6600XT 2 years ago, woow 😒😒😒🤣

@hollisnelson5925 Год назад

Hi Mike, did I hear you say that the Curve Optimizer updates it's settings in the BIOS so they remain in place? I don't believe my current version (which doesn't have the Optimizer) does that. I currently have to run the Ryzen Master every time I restart my system. If that is the case I'll update my version immediately.

@mikesunboxing Год назад

pretty sure that is the case, if not make a note of the undervolt setting and apply it in the bios

@Daniel-vx5vc Год назад

This detailed video was quite helpful. I recently bought a PC that has the same CPU. I'm in a much cooler room (22C) than you were and out of the gate with a fresh Windows install Cinebench is driving the CPU to nearly 90C with just 1 pass! This PC is liquid-cooled and the seller claimed that it did not have issues, so I've reached out to them to resolve this. I'm assuming they did not adequately liquid-cool it. Thanks for the video!

@mikesunboxing Год назад

sounds like it isn't properly installed

@Daniel-vx5vc Год назад

@@mikesunboxing It's an MSI pre-built (the Aegis ZS). It's possible they made a mistake during assembly but I'm wondering if it's a lack of enough coolant.

@mikesunboxing Год назад

@@Daniel-vx5vc This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@markpoint1351 Год назад

hey mike great video and thanks for the info(much needed)!!! sorry for missing the stream this past weekend... was having an off day and didn't feel like being in the same chat room with that john sulivian punk!!! look forward to you next stream with no bullying buy the punk b!!!

@mikesunboxing Год назад

Hi Mark, sorry to hear that, we didn't see any of that occurring in chat and if you can provide us any approx timestamps, we will go in and take look, as we don't like to hear about anything like that happening ;-(

@markpoint1351 Год назад

@@mikesunboxing hey mike, i believe the incident happened 3 streams ago(last stream i watched i remember not wanting to see his name)... can only remember i was talking with someone at the end of the stream about pc stuff for our son's. then john decided to knock down on what was being discussed.... i did stand up for myself and asked if he felt like a big man for saying what he did... he stopped his banter but his comments just made me uncomfortable... he was making fun what was to be considered to be common knowledge about hdmi vs dp... me coming from the console world, you could say its "new" info for me and felt like he was just being high on his horse... i really do enjoy your streams mike and the MUB community and thank you for taking the time to address this...

@mikesunboxing Год назад

@@markpoint1351 I'll keep an eye on it in future streams and if it happens again, he will be warned

@markpoint1351 Год назад

@@mikesunboxing thank you mike for the professionalism :) ... this is something most youtubers wouldn't do... gentleman and a scholar you are

@woofaki5550 Год назад

Nice video :) Are 5700x and 5800x that similar?Cinebench23 score is very close.

@mikesunboxing Год назад

they can be quite similar in some setups

@Jwebbplayz 3 месяца назад

I seen your thumbnail and got excited to use curve optimizer for the streaming pc but then I saw ryzen master … lol, I thought it was a bios vid.

@mikesunboxing 3 месяца назад

we have done a version of this in the bios for curve optimiser

@Jwebbplayz 3 месяца назад

@@mikesunboxing sweet! I need that

@DigitalDemonicDavros Год назад

I actually got a hint from ETrchnics and changed the voltage and it went shhhh

@IRQ1Conflict Год назад

Happy with my undervolt on my 5800x. -26 all core.

@mikesunboxing Год назад

damn!

@OlettaLiano Год назад

Hi, Mike. I've never been a fan of Ryzen Master, and here's why. I just ran Cinebench R23 Multi-Core for 10 minutes on my manual overclocked 3900X and got a score of 18517 with a max CPU temp of 72c. Then I ran Cinebench R23 Multi-Core for 10 minutes with Ryzen Master's Auto OC and received a score of 18603 with a max CPU temp of 76c. 86 points isn't worth the extra 4c in my opinion.

@mikesunboxing Год назад

yes it is a "safer" option for those a little unsure what needs to be done, seasoned pros will be able to dial in much better settings

@TranceHistorian Год назад

Neither have I, always use BIOS. Don't like Ryzen Master and always discourage people from using it.

@illz11226 11 месяцев назад

Is there a way to make new mater ryzen settings be applied upon pc startup? Or will i always have to open ryzen master app to apply my undervolt settings?

@mikesunboxing 11 месяцев назад

you could transfer the setting to the BIOS, that would do it, the reason it doesn't auto run is because if you screw up the settings windows will always try and load them

@philp2088 Год назад

What version of Ryzen Master do you need to download, as i cant find relevant one for Ryzen 3600 with curve optimiser?

@mikesunboxing Год назад

the latest version has it in if your platform supports it

@operator2618 Год назад

so did you have PBO precision boost overdrive enabled and forced in bios ?

@mikesunboxing Год назад

i leave it as either off or auto, never on

@DannyDoDar Год назад

I'm having issues with my 7600x on the X670E Steel Legend, with bios update 1.24. Windows 11 - 21996.1 I have a 280mm AIO, Liquid Freezer II Rev 3, and I have ensured 3 times that its functioning properly and is more than adequate cooling. BUT still no matter what, it cant get the temps down the same as what would usually be expected with these specs, and thus its thermal throttling and hitting max temps (95c). I'm getting around 12200 - 12400 in cinebench r23, when the expected result stock, even with a shitty air cooler should be in the range of 14k+ bench result. I've got this niggling feeling that its something to do with the bios, but I wouldn't know, because when I first set the PC up 3 days ago, I updated the bios with USB before I even installed windows. I really want minimal risks with installing BIOS updates, or roll backs for that matter, but I'm still wondering, does anybody else have this issue, or have had issues with low stock benchmarks on my board, and whether or not its worth rolling back my BIOS and if so, to which one. Specs: 2x G.Skill Trident Z5 Neo RGB 16gb DDR5 6000 CL36 EXPO x670e Steel Legend Ryzen 5 7600x Zotac 3060 TI Twin Edge OC Arctic Liquid Freezer II 280 A-RGB SN850 1tb NVME Windows 11 - 21996.1

@mikesunboxing Год назад

definitely get the newest bios then test again, if you are unsure if the BIOS update worked correctly update it again to be sure

@PaulJohn01 Год назад

I never knew there was a Windows store version of cinebench 🤔. Would you need to do this maybe as the seasons change and temps go up/down or just run it once and leave it alone ? Just built a new system, will start it up tomorrow for the 1st time so i think i'll run cinebench today and see how my old/current PC does then see tomorrow how much better the new rig is. Same GPU for the moment.

@mikesunboxing Год назад

i would dial it in and leave it if it was stable, with energy prices as they are any potential saving is a good thing

@PaulJohn01 Год назад

@@mikesunboxingCool ( no pun intended ) . Just ran Cinebench on old/current system i7-4790k, 1105 single core, 4655 multi core, i do have it overclocked, tomorrow i'll test on new system.

@proletariaRt Год назад

Hello from Greece. Very nice video!!! What about my 7 5700g ? Can i try it ? As you may know , here in Greece, right now the temperature is 37c in my hometown,so the cooling of our cpu is always a deal...Thanks

@mikesunboxing Год назад

not sure actually give it a go, it might be just what you need right now

@uglybob7505 Год назад

lol sounds like a Daft Punk song when you say FASTER QUIETER COOLER lol

@PaulJohn01 Год назад

Oh i was thinking of Bigger Harder Better 😁😁😁😁

@mikesunboxing Год назад

i was thinking the same when writing the title and thumbnail

@JoseSouls Год назад

10/10 comment bro

@MrGamelover23 Год назад

@@mikesunboxingdo you know if there was any software that does something like this for GPUs as well? Because that would be amazing.

@beefchrist Год назад

Hi Mike - I wonder if you can help - when I run the Curve Optimizer and apply settings, on reboot it gets stuck in a boot loop and won't open windows (11). I can remedy this by resetting BIOS, but obviously it then won't have the settings applied. Any ideas what this could be? It's the 5900x

@mikesunboxing Год назад

It might be applying a too low voltage maybe manually up it a little

@tcirit Год назад

I have the same problem with my 5900x.

@razmanrhoads2078 Год назад

Whats ur recommendation for safe oc config?do it from bios or just using ryzen master?

@mikesunboxing Год назад

ryzen master will give the best safe results

@mvpgoku7720 Год назад

Nice video mike! Very informative

@mikesunboxing Год назад

Glad you liked it! thanks for commenting

@BuckyKat9999 Год назад

Literally did this with the new 5600x, its works wonders! Did think my system was going to explode at one point though!!

@PaulJohn01 Год назад

My new 5600x system get's turned on for the 1st time tomorrow !

@TranceHistorian Год назад

@@PaulJohn01 how's it been running?

@PaulJohn01 Год назад

@@TranceHistorian Very well so far. I actually got the 5600x cheaper than i could get the 5600 🤔🤔 It's the Philippines and we have weird pricing. I did buy a custom air cooler but temps seem fine. It cost about 180 dollars and i don't see a need to get an AM5 CPU anytime soon.

@mrmaxin53 Год назад

Mind sharing your test numbers? Max hertz, temp, and power draw?

@iparzzz Год назад

70 is hot bro. Mine max at 65 playing warzone on ultra graphics. I have 5600x

@TheRoamingHistoryador 2 месяца назад

Hello. I followed your tip on your video using the Ryzen Master but on the part of changing the value from -19 to -27, it restarted over and over when I entered my profile password and loads up. I'm still waiting for the third attempt to open my profile for the third time. Should I revert back to -19 just in case?

@mikesunboxing 2 месяца назад

yes lower it a bit to regain stability

@TheRoamingHistoryador 2 месяца назад

@@mikesunboxing thanks for this help. When I tried to lower it, I turned off and pulled the power cord out, and performed clear CMOS. Then I turned on and checked my BIOS if there were settings that changed to default. After this, I proceed on loading Windows. Upon loading Windows, I proceed to Ryzen Master and revert back to -19. I wonder how to stop the start-up prompt of the Ryzen Master upon loading to Windows, because this automatically prompts me to use it although I'm not opening it during the Windows loading.

@XENONEOMORPH1979 Год назад

always look for the sweet spot mukka.

@mikesunboxing Год назад

Definitely

@REALLYRANDOMREVIEW5 Год назад

under volt helps speed the CPU up ? im confused . i guess it makes sense cooler, quieter, wise but how more performance ? im going to try it out Today but will it still be good for a Crap 3800 not sure why i even went this CPU its never been good enough for what i needed not sure its worth getting the 5800x is worth it either now but defo try this out today hopefuly Thanks Mike, & Kath

@mikesunboxing Год назад

it works on the principle that one of the trigger points for frequency throttling is the thermal sensor, less voltage means less heat generated so in theory higher boost clocks and maintained longer. all chips are slightly different so some react better or worse depending on the quality of the chip

@REALLYRANDOMREVIEW5 Год назад

@@mikesunboxing thanks Mike not got round to it today but will try it out on the 3600 see if i can get anything extra outa it

@Chuck_vs._The_Comment_Section 10 месяцев назад

I have the "Control Mode" option in the basic view, but the "Curve Optimizer" option is not displayed. - Do I need a special board / a special Ryzen processor for this function?

@mikesunboxing 10 месяцев назад

what board and processor do you have

@Chuck_vs._The_Comment_Section 10 месяцев назад

Ryzen 3600 + MSI B450 something.

@Chuck_vs._The_Comment_Section 10 месяцев назад

However, I have long since solved the "mystery". The FAQ provided by AMD for the Curve Optimizer states the following: _Is it supported on all AMD CPUs?_ _No, the Curve Optimizer feature is only supported on the CPUs listed below:_ _Desktops using AMD Ryzen™ 5000 processors._ _AMD Ryzen™ Threadripper™ PRO 5000WX processors_

@jamesmiscellaneous Год назад

MUST OPTIMIZE! Said every computer enthusiast.

@cyberlogic3102 7 месяцев назад

Do i have a good chip if i can run 4.85GHZ all core at 1.241v. I have a 5600x

@mikesunboxing 7 месяцев назад

if it is stable that sounds pretty good

@asifkadodia3822 Год назад

Does Ryzen master app needs to be open every time after optimization is complete?

@mikesunboxing Год назад

yes or transfer the settings manually to the BIOS

@mariodroid7 9 месяцев назад

Unfortunately this was not stable on my 5600x. The curve optimizer set it to -28 and my pc rebooted while gaming. I set it to -25 and then -20 and ran OCCT and it still gave me errors so I had to disable it.

@mikesunboxing 9 месяцев назад

sorry to hear that

@lxs7646 24 дня назад

When i open the application its show the ryzen master does not support current processor i have ryzen 5 5600H processor what to do 😢?

@mikesunboxing 24 дня назад

5600h is a laptop processor so won't be supported, we have done a video on laptop processor tuning

@Free-Palestine170 Год назад

Hi can I do this with an HP pavilion that has a locked BIOS Can I use the computer while the optimizer is running

@mikesunboxing Год назад

not sure to be honest, worth a try

@LONGTRANGBILL Год назад

Great video and subject! Unfortunately I bought the 5800x3d.. and it's not applicable.

@mikesunboxing Год назад

Sorry to hear that NOT :-)

@namikazeminato7173 3 месяца назад

I didnt have the basic view in the ryzen master, plss help

@mikesunboxing 3 месяца назад

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@zdelix11 Год назад

I did that and my temp never went above 65C..so im wondering is my cpu working properly or my cooling is too good?? I have 5600g with AMD cooler that comes with it.. max freq. Is 4.449,voltage 1.311

@mikesunboxing Год назад

that sounds pretty good for the stock cooler, if the benchmarks look about right i would not worry too much about it and just enjoy it

@zdelix11 Год назад

@@mikesunboxing i did it again just out of curiosity.so the temp is perfect but around 54% completion i just get random reboot.im thinkin the voltage is too low, i already have offset on -0.5..idk it just intrigues me now.btw tnx for taking the time for reply

@T.Lspitz 7 месяцев назад

I just did this with my 5700x. With only curve optimizer running and overclock still set at auto without adjusting anything its running a -26 all core with CO. I ran cinebench r23 with RU-vid playing in the background and got a CB score of 15,631. How is my 5700x scoring better than his 5800x?

@mikesunboxing 7 месяцев назад

more tasks running in the background and maybe better quality silicon or cooling

@T.Lspitz 7 месяцев назад

@mikesunboxing oh i see. That would make sense. Quick question: Will curve optimizer automatically undervolt each core to optimal levels or do I need to undervolt little by little till i find the sweet spot AFTER having curve optimizer already enabled?

@makiwa Год назад

Thanks Mike..... But my Ryzen Master doesn't have the Curve Optimiser...??? R5/5600X.

@mikesunboxing Год назад

hmm it should have? might need an update or re-installing

@makiwa Год назад

@@mikesunboxing Hi Mike. Yes, my bad. I was still using a version I downloaded ages ago! But great informational Video. I'd never seen this mentioned elsewhere! Definitely worth a "Share"! "Baie dankie".... Almost pronounced like "buy a dunkey".....lol.

@mikesunboxing Год назад

@@makiwa Thanks 🙂

@techsenseindia Год назад

What's the stepping of this 5800x B0 or B2 as B2 Stepping 5800x has already optimised by amd i have 5800x with B0 and horrible temprature spikes and running 90+ in no time as soon as started multicore cine bench r23 what to do now please help me out can AMD give me rma for the thermal issues?

@mikesunboxing Год назад

the details in the video should enable you to reduce temps quite a lot, although all core cinebench loads will also generate a lot of heat

@techsenseindia Год назад

Can AMD accept the RMA Request if generate on the basis of high thermal issue overheating amd thermal throttling and abnormal behaviour of their perticular defective product?

@macabrecreation1067 6 месяцев назад

hello, I have a Ryzen 5 5600. I optimized mine and Ryzen Master set set it to -27 my max temp is 72.9 max power package is 95.20 I tried it to -30 my temp and power is much lower, max temp is around 54 max power package is 65 but my core clocks are not reaching 4.6 it's only maxing on 4.2 any idea why is that? and what should I do to reach 4.6 at lower cpu temp and power

@mikesunboxing 6 месяцев назад

might need to manually set the multiplier, but if the performance is the same or close i wouldn't bother

@macabrecreation1067 6 месяцев назад

@@mikesunboxing how do i do that? btw, im apparently optimizing PER CORE and see the difference

@mikesunboxing 6 месяцев назад

@macabrecreation1067 6 месяцев назад

@@mikesunboxing thanks a lot 😊

@lifeisbeautiful7361 Год назад

can i use this method for ryzen 5 4500?? on desktop

@mikesunboxing Год назад

i don't see why not

@ProjectGamerYT 10 месяцев назад

I'm missing the "curve optimiser mode" on mine, any idea why?

@mikesunboxing 10 месяцев назад

Maybe need to update the bios

@tarantulamadness6191 5 месяцев назад

5000 series and up.

@ProjectGamerYT 5 месяцев назад

@@tarantulamadness6191 I have a 5900X

@DieTabbi Год назад

Ryzen master give me -30 for all cores but the power goes up tp 1.45 mV. I got more fps and bit less temperatures. But where is that undervolting? I thought to get around 1.2 to 1.3 mV maybe loose some fps / ghz but much better temps? Did I something wrong

@mikesunboxing Год назад

ryzen master is a bit conservative on voltage, you might be able to reduce it more

@nef1ss Год назад

@@mikesunboxing what should i do if i want to decrease voltage and temp? I Choose - 25 and voltage not descrease

@mikesunboxing Год назад

@@nef1ss This is maybe easier to advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@magnusnilsson9792 Год назад

Didn't do much for my 5600, actually lost about 600 points in CB R23, but idling went down from 11W to 4W.

@mikesunboxing Год назад

a little power saving, that is a good thing, what about max temps? A little lower also?

@magnusnilsson9792 Год назад

@@mikesunboxing Don't know about temps, they are still below 40C

@joseluisgomez1723 Год назад

I have a 5600g with Biostar b450mh can i do this with that ?

@mikesunboxing Год назад

not sure, worth a try

@beernon Год назад

Hi Mike! Can I use this one as well with my 3500x? If so, how? 😂

@mikesunboxing Год назад

no you need the video released shortly after, the quick and dirty undervolt

@cristialecu7300 Год назад

Hello srry for question it's better choice all cores or per cores?

@mikesunboxing Год назад

depends what you are doing single core or per core will give slightly better results

@cristialecu7300 Год назад

@@mikesunboxing thanks so much

@mikesunboxing Год назад

@@cristialecu7300 No problem 🙂

@mqcapps Год назад

Question....what's the difference between auto oc and per core?

@mikesunboxing Год назад

you can set individual speeds for the core manually some core OC better than others, auto will try and find a balance across all cores

@mqcapps Год назад

to thanks

@mikesunboxing Год назад

@@mqcapps No problem 🙂Have a great weekend

@mikegibson4500 11 месяцев назад

Will this program work with 5800x3D?

@mikesunboxing 11 месяцев назад

yes but not to such a great extent

@martinrakovicky1189 Год назад

How does PBO wotk with optimizer?

@mikesunboxing Год назад

you don't really need it as the optimiser works out what the chip is capable of

@mikep9418 Год назад

I find Ryzen Master is very temperamental with regards to whether or not it wants to install. It often chucks up errors for no apparent reason, requiring editing of the registry to get it to work. Not worth the hassle for most people.

@mikesunboxing Год назад

be interesting to see if others agree. don't think i have had any issues with it, but i could in the minority

@LauraKnotek Год назад

@@mikesunboxing I never had issues with it either.

@mikesunboxing Год назад

@@LauraKnotek Thanks fort the info 🙂

@LauraKnotek Год назад

@@mikesunboxing You're welcome, Mike.

@amcdonald7479 Год назад

So I ran this with pbo +200 on and let it run the 40min test. Im actually mind blown. Im hitting a few points over 12k in cinebench multicore now with a little ryzen 5600 on a 360 AIO.......Thats faster than an 8 core I9 9800X in multicore. waw what a difference. Im also running everything on full load at least 9 Oc cooler than before. The offset it wanted scared me a bit but its not had a problem in 48 hours of heavy use. -30 offset it chose btw waw. I honestly thought running this on a 6 core with such a heavy duty 360 AIO on it wouldnt be worth bothering with. Boy was I wrong. This CPU now under load sits at 4.645ghz steady while running cooler.

@mikesunboxing Год назад

that is an awesome result, well done

@inoaleria Год назад

settings pls

@sgoaty Год назад

Is per core not the way to go with this?

@mikesunboxing Год назад

If you have the time to work out the settings it will give a better boost

@scyzorpl Год назад

Hi very interesting and i need to do this to my R7 5800X cuz it loves to be HOT 😂 but in any chance do you have setting that i can do manually PPT TDC EDC ?

@mikesunboxing Год назад

all cpus behave differently so manually entering some other processors results is unlikely to be a good choice, maybe a starting point but then you still need to dial it in

@scyzorpl Год назад

@@mikesunboxing Thank You Mate for your reply yeah so gonna have to play with the settings

@WilliamAndrewPhilipBodie Год назад

Mike's How to is Worthy of a Support comment. Like & a share 🙂

@mikesunboxing Год назад

bless you kind sir

@WilliamAndrewPhilipBodie Год назад

@@mikesunboxing You did not show the 3 cat's Saturday. they are for closing bags 😛

@mikesunboxing Год назад

@@WilliamAndrewPhilipBodie They were probably chilling outside as it does get very warm in here....

@WilliamAndrewPhilipBodie Год назад

@@mikesunboxing No the 3 plastic cat's (for closing bags) that i did sent 😀

@mikesunboxing Год назад

@@WilliamAndrewPhilipBodie I'm sure they were shown

@keibohow69 Год назад

while running cinebench what were your effective core clock speeds?

@mikesunboxing Год назад

not sure sorry i'll take another look

@grichard1585 Год назад

It's funny that you Brits think 30c (86f) is hot. But thanks for this video, I just got the 5600x and was thinking of installing Ryzen Master.

@mikesunboxing Год назад

we aren't used to it, so when it gets suddenly hot, it is a shock to the system. we are used to the rain and cold though

@keith38able 5 месяцев назад

you show results for a ryzen 7 where is the ryzen 5 testing

@mikesunboxing 5 месяцев назад

didn't have one on hand at the time

@DavidWilliamsnz Год назад

Can you do this with mobile ryzen cpus?

@mikesunboxing Год назад

i am not sure to be honest, i'll try it on my 5500u and see

@DavidWilliamsnz Год назад

@@mikesunboxing would be awesome to know and I’ll give it a go later too

@JTKGAMING14 11 дней назад

I have a 5800x and amd sets it to -30 but its lie. It will not be stable on most. And can run for hours if not a whole day befor crashing. I dont think its the top end thats the problem

@mikesunboxing 11 дней назад

is that a factor of -30 or minus 30 millivolts?

@JTKGAMING14 11 дней назад

@@mikesunboxing -30 there is other videos on how its unstable

@tiz6581 Год назад

My 5800x always runs at max speed. At idle I get temperatures up to 70 degrees but in games it’s not worse.

@mikesunboxing Год назад

ouch! motherboard overclock?

@tiz6581 Год назад

@@mikesunboxing no nothing but it seems like my 5800x runs at 100 percent at idle. idk what the problem is.

@mikesunboxing Год назад

@@tiz6581 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@tiz6581 Год назад

@@mikesunboxing thanks for the advice

@sudZAYNsu 9 месяцев назад

14,600 for 5800x is low I guess. I got 15,600 but temperature got upto 88 degree.

@mikesunboxing 9 месяцев назад

yeah i have way too much crap running in the background.

@sudZAYNsu 9 месяцев назад

@@mikesunboxing Which cooler did you used with 5800x ?

@user-nb9kl2gk9w Месяц назад

everytime i open ryzen master after optimizing it restarts my pc

@mikesunboxing Месяц назад

that means the settings are too aggresive, dial it back a bit

@user-nb9kl2gk9w Месяц назад

@@mikesunboxing how when i cant access ryzen master, + i did 4ghz and 1.2V on a amd ryzen 5 5500

@mikesunboxing Месяц назад

@@user-nb9kl2gk9w This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

@kaisersolo76 Год назад

Please Use HWInfo64 - HWmonitor aint the best for Ryzen not accurate.

@Original_Andy Год назад

Would it be possible to do it on my R7 3700x?

@mikesunboxing Год назад

not with ryzen master, it doesn't support the automation of it at present, you can do it manually though we did a follow up video on it which should be out if not i'll release it on Friday for you

@Original_Andy Год назад

@@mikesunboxing I’ll be looking forward to that video then, thanks :)

@mikesunboxing Год назад

@@Original_Andy Will be going out on Monday now, sorry

@Original_Andy Год назад

@@mikesunboxing its all good, I’m not in a rush