Тёмный

Make it Shine! Liquid Chrome Pen on Jewelry (and Legos!) 

Sterling Kisses
Подписаться 4,7 тыс.
Просмотров 12 тыс.
50% 1

Here I try a Molotow Liquid Chrome Marker on costume jewelry and a Lego Knight! I also go into details of what worked to protect the surface and what didn't.
More jewelry at www.SterlingKi...
Music: / nicholas-damario
Twitter @SterlingKisses
Facebook: / sterlingkisses
Instagram: SterlingKisses

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@nathanhilderman867
@nathanhilderman867 Год назад
I was a little worried when you pulled out lacquer finish. You need to be very careful when airbrushing with lacquers because if they get in your eyes you could severely damage them. There are a couple of model painters on RU-vid who went color blind because they didn’t wear an eye shield
@SterlingKisses
@SterlingKisses Год назад
Thank you for sharing this. I'm going to pin your comment here so people can take the proper steps to protect themselves if they decide to use an airbrush with it.
@ChubbyBunnyStudios
@ChubbyBunnyStudios Год назад
Do you think dipping the item in the coating and letting it drip dry might work?
@SterlingKisses
@SterlingKisses Год назад
@@ChubbyBunnyStudios I like the idea. I'll have to try that!
@chrisstephens6194
@chrisstephens6194 7 месяцев назад
Do you think it would be suitable to repair the chrome emblem on my steering wheel?
@LeftyPem
@LeftyPem 6 месяцев назад
Thank you for this review. Had to dig through a lot of very poorly produced ones to find yours, which was well explained, thorough in experimentation, and professionally written and edited.❤
@SterlingKisses
@SterlingKisses 6 месяцев назад
Thanks for watching! Hope it was helpful.
@kianamay573
@kianamay573 7 месяцев назад
Hey man this was very helpful and thorough! Thank you for what you do!
@thewiseman80
@thewiseman80 9 дней назад
The new molotow chrome mirror ink is awesome once applied you have to have to leave it 3 to 4 weeks before touching it. once you wait about that time, the mirror chrome finish stays. if you touch it when first dried it will dull.
@SterlingKisses
@SterlingKisses 8 дней назад
@@thewiseman80 I guess that makes this video obsolete! That's awesome to hear though. Can't wait to try it.
@Yukiokoba
@Yukiokoba 4 месяца назад
Ooh! As a doll collector this will be an amazing marker to use to touch up or color jewelry to make it shiny, I think since most of my dolls are for display only I wont have to worry much about smudging. I do wonder however if the pigment stains other surfaces. Thanks for the cool video!
@dogeeatsveggies
@dogeeatsveggies 4 месяца назад
very helpful video!! I've been looking for a good top coat for my chrome pen fixes on my bag hardware 🥰🥰🥰
@sibiriantigertigress
@sibiriantigertigress 10 дней назад
Ich hab das Liquid Chrome auch und nutz das Future, jetzt Pledge, fürs Finish. Das mit dem Alclad muß ich auch probieren
@kaylemathewcomendador6964
@kaylemathewcomendador6964 6 месяцев назад
Found a good protective coating for that chrome pen? Neat! It dulling easily is quite the recurring problem for most people that want to restore chrome items easily with that pen. So neat to see a way to coat it without dulling it. And have you heard of a chrome paint called “MIRROR” by Stuart Semple before? I’ve heard it’s pretty good too and doesn’t need a air brush, but regular paint brushes instead.
@Valeszable
@Valeszable 5 месяцев назад
Gel nail top coat with uv light might work as well
@angelrose9117
@angelrose9117 3 месяца назад
Super cool! Thank you 😊
@mamawama1856
@mamawama1856 8 месяцев назад
日本ではアルクァッドのトップコートは手に入らないので私はタミヤの角瓶のx-22クリアとエナメル溶剤を1:3の割合で希釈して使用してます。エアブラシで吹きかければほぼ光沢を失わずにトップコートが可能です。
@NateWithWho
@NateWithWho 6 месяцев назад
I wonder if the candy ink finish would give it a color chrome.
@trillmitchell
@trillmitchell 5 месяцев назад
Use molotow clear coat. U use it on canvases and models it still shines
@busterscustoms
@busterscustoms 8 месяцев назад
Do yourself a favor try Zoet Chrome pens better finish at a quarter of the price
@3dprintingtoday
@3dprintingtoday Год назад
I just wanted to ask for your resin 3D print casting video for jewelry can you use a vacuume chamber?
@SterlingKisses
@SterlingKisses Год назад
Hello, sorry, but I don't think I understand the question. I use the vacuum chamber for degassing investment and casting.
@3dprintingtoday
@3dprintingtoday Год назад
@@SterlingKisses after the vacume chamber where do you put the investment? What is the cheapest way I can do this?
@SterlingKisses
@SterlingKisses Год назад
​@3D Printing Today after degassing, the investment is poured into a flask that contains the parts we want to cast. One of my earlier videos, "casting jewelry part 2" goes into more detail. You have to use jewelry investment. Regular plaster won't take the heat required for burnout. Riogrande is a good place to look for tools and supplies.
@3dprintingtoday
@3dprintingtoday Год назад
@@SterlingKisses what are links to the cheapest needed items I’m 15 so it’s hard to pay so much
@maurizior.4873
@maurizior.4873 8 месяцев назад
How to remove chrome marker from Lego-type plastic? Is there a thinner? Thank you.
@dogeeatsveggies
@dogeeatsveggies 4 месяца назад
thank you 🥰🥰
@t1mmy13
@t1mmy13 11 месяцев назад
Can you polish the lacquer? 🤔
@SterlingKisses
@SterlingKisses 11 месяцев назад
That's a good idea. I don't think it's damaging the liquid chrome when it's applied, so polishing the lacquer might restore the strong mirror finish. I'm not sure how to go about polishing the lacquer though.
@Krueger_ai
@Krueger_ai 11 месяцев назад
Would putting the chrome marker and the alclad 2 lacquer varnish on a lego knife handle prevent the chrome from chipping off?
@SterlingKisses
@SterlingKisses 11 месяцев назад
Yes, I think it would hold up well with a couple of coats of the alclad
@Krueger_ai
@Krueger_ai 11 месяцев назад
@@SterlingKisses nice. How much do the markers and the lacquer varnish cost?
@SterlingKisses
@SterlingKisses 11 месяцев назад
@@Krueger_ai I don't think it was much more than $25 total.
@tallnrough68
@tallnrough68 7 месяцев назад
It takes a long time to fully dry
@weskercarr6622
@weskercarr6622 2 месяца назад
Make a video with Gold now on legos
@SterlingKisses
@SterlingKisses 2 месяца назад
That's the plan!
@kianamay573
@kianamay573 7 месяцев назад
Do you have to use alclad lacquer or will any lacquer work for keeping the mirror shine?
@SterlingKisses
@SterlingKisses 7 месяцев назад
I didn't test any other lacquer so it may depend on the brand. Someone else here in the comments mentioned using Tamiya x22 clear gloss with success.
@kianamay573
@kianamay573 7 месяцев назад
@@SterlingKisses ok thank you!
@teabagNBG
@teabagNBG 7 месяцев назад
is there a way to use a brush or a airbrush with the liquid chrome? i only see them in availible as marker..
@SterlingKisses
@SterlingKisses 7 месяцев назад
Yes, they sell refills for the marker that you could pour into an airbrush instead. Or you could open the marker and pour out the liquid if you can't find the refills.
@livefootagetube
@livefootagetube 2 месяца назад
The main question here is can it be touched after it dries I have not came across a chrome paint pen yet that will not tarnish after it has been touched I suppose the chrome paint pens are good for model cars that are just going to be in a display case but if you actually want to touch the item once in awhile with your hands all these chrome paint pens will tarnish unfortunately let me know about this one if it tarnishes when touched
@SterlingKisses
@SterlingKisses 2 месяца назад
@@livefootagetube it still smudges and loses its reflective surface if touched, even after a month drying. There is a focus in my video on how to apply a protective coat over the paint while retaining the reflective surface.
@serenityjewel
@serenityjewel 29 дней назад
The entire video is on how to fix that problem. The. Entire. Video.
@vegeth1985
@vegeth1985 Год назад
Hi i dont have understand fornorevent tue opacity at touch I need to buy this alclad II product? Thanks
@SterlingKisses
@SterlingKisses Год назад
The Alclad will help to protect the surface finish. Otherwise the mirror finish becomes dull when touched. Alclad II was the best product I found when testing.
@Roii000
@Roii000 Месяц назад
Can you add this to clothing?
@SterlingKisses
@SterlingKisses Месяц назад
@@Roii000 probably, but I don't think it would stay reflective.
@117lun
@117lun 8 месяцев назад
I only used Refll bottle with Mr Hobby 400 thinner and Tartar pick to paint the large surface with NO penstroke ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lIX1u7l3NPs.html
@SterlingKisses
@SterlingKisses 8 месяцев назад
Great technique!
@stampjunkvdberg3119
@stampjunkvdberg3119 7 месяцев назад
You needed to pump cuz there wasn't much liquid coming of your nib.
@mikeperry8144
@mikeperry8144 Год назад
🤦 "Promo sm"
Далее
Airbrushing with a Molotow Liquid Chrome Pen Refill
6:58
ОНА БЫЛА ПЕВИЦЕЙ🤪
3:13:12
Просмотров 1,1 млн
А я с первого раза прошла (2024)
01:00
RARE LEGO COLORS you DIDN'T know EXIST...
9:14
Просмотров 327 тыс.
I Made a Cozy Campfire for One of You
8:11
Просмотров 123 тыс.
PAINT Vs. PAINT PENS
17:50
Просмотров 366 тыс.
Lego is expensive, so I made my own out of clay
13:10