Make Your Own Engine and Transmission Mounts 

How to make your own engine and transmission mounts on a custom Jaguar XJ6 Rock Crawler... and any other thing you might want to make mounts for. * Vote for Us HERE: www.onxmaps.com/offroad/app/build-challenge#build-vote Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout: www.onxmaps.com/ #onXbuildchallenge #onxmaps #bleepinjeep #bleepinholygrail * Like this video? Here is the Whole Series: onX JAG Build Part 1 - Offroad Meets Luxury: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HbEGBIjKRRw.html onX JAG Build Part 2 - JAAAAAG: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UMKkY3e2VHg.html onX JAG Build Part 3 - Calling Out My HATERS: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sxlqDcCT3FI.html onX JAG Build Part 4 - Cutting up the Truck: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pha2_toXdjY.html onX JAG Build Part 5 - Dodge Dominates Rock Crawling: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VtmXo0WHKjU.html onX JAG Build Part 6 - 1st Gen Dodge No More: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IiipeeMd4wU.html onX JAG Build Part 7 - I Cut Into the Gas Tank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vu7lfDWmUKc.html onX JAG Build Part 8 - What Will $6500 Buy Ya: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1MH-2PVCBUE.html onX JAG Build Part 9 - Ian Visits the BleepinJeep HQ for OnX: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IziBr2c2d-w.html onX JAG Build Part 10 - Jag on Dodge: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Hqph0MpiWPo.html onX JAG Build Part 11 - How To Set Up Leaf Springs: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aOhrp49BsOo.html onX JAG Build Part 12 - Make Your Own Engine and Transmission Mounts: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tlEI0d44W1w.html * Get 20% OFF ONX GPS Maps: Enter code “Bleepin20” at checkout Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discounts/ * If a BleepinJeep video has ever helped you consider returning the favor by: • Supporting us on Patreon here: www.patreon.com/bleepinjeep • Becoming a Member here on RU-vid: bit.ly/2wGeSec • See what we recommend on Amazon here: amzn.to/2kc6Syn • Buying a T-Shirt Here: www.bleepinjeep.com/store • Or Just leaving a kind comment on FB here: facebook.com/BleepinJeep * *This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.*

When you get this finished, I want to do a little unauthorized driving of this rig.

Salute lunch lady! She rocks! ! !

YES!!!! New episode!! The wheel lugs tips were fun, don’t get me wrong, but I’m dying to see the marriage of this jag body and dodge frame ❤❤❤

22:50 Nice to see your Plasma Table is still getting lots of use! Those cutting slats have grown a little bit, but look like they have a few miles left. Thanks for the shout out!... We discontinued that original design, but do still have a round tub option along with the roll arounds that you mentioned. Your Jag build is coming along nice, lots of custom tabs and brackets to make. I can't wait to see the rest of the progress!

For the zerk fitting on the cross member , point it down and drill a hole in the skid plate so you can have access to the fitting.

I've welded in a puddle before 😆. Looking good 👍🏻. I put that floor winch in, 1000% more convenient.

You are a craftsman. Your rigs usually can go through anything out there

Now that is a proper lunch... Wow...

Nice job guy's, man this Jodge is really comin together. Cant wait to hear it fire up. Goin to vote right now. Can't wait for the next video.

Hey Matt, first off I enjoyed meeting you and Hope at Jeep Invasion 2022! I watch your videos on my TV, so don't have the option to comment there... I was really hoping to see the Jag go all the way on the vote, and voted several times for y'all. However, now I'm voting ABP (anybody but paul) his head is big enough already 😁 Anyway, I'm looking forward to seeing your rig completed!! And hope to catch up with again someday! Keep on Building!

Great video Josh and Matt and 😱 Tuscany Chicken! 💕🤤 Mamma mia! Great job Hope👏👍🍗🇮🇹

man lunch looks great.

It makes perfect sense to me.. 😊

Rigs coming along great, beautiful lunch served with a lovely smile, can't ask for more, thanks for sharing ,all the best to yous and your loved ones

LUNCHLADY❤ Love Hope's SMILE❤

911 still makes that plasma table dust catch, and they also have two or three other configurations as well. I have a set of their plasma stencils, and they are very handy.

ive watched the start to the other 2 onx builds an your frame cut is for sure the best one

She's coming along

I know I'm not an expert, but I really think you should have boxed in both sides of the frame of the engine and transmission and a little bit further back to keep from torque twisting. Those motor mounts seem a little sketchy. Keep up the great content! I've been watching you guys for years! Thank you!

31:29 - 😂😂😂😂 Idk who would even hate on chicken tenders, that sounds delicious!

My tape measures all show tenths (.9 as well). They are all Stanleys, the only brand I buy. I'm a machinist and we work in tenths (.1) all of the time.

Great video.

The infamous words it’s kinda good. I enjoy fabrication and your videos show what you can do without billion dollar sponsors.

Love watching y’all. How many days since last accident? Haha God Bless 😊

You guys are awesome.

I only watch for the lunch break.

It really looks like an 80's backyard slop together junk I would of seen when I was a kid, and I am fine with that. Good job!

This is awesome, and of course bonus points any time the lunch lady is in a video. I really don't get how fab rats has so many votes already.

It makes more sense than you know. ✓

It's only as cobbled together as most Sema projects

29:15 my new favorite noise 😎 I’m gonna make it my phone ringer

Hahah planned obsolescence on a trigger. those sneaky little computers.

It’s gonna draw quite a crowd at sema! Mostly people wearing crocs but they’ll be all over it

I keep voting for you guys. Every day if I remember…

I got my trigger replacement on Amazon...lol

I think when everyone's vehicle's are all together, find out what each vehicle weight's. With that motor y'all might be heavier than Robby's Delivery van .

Im happy when my wife makes me toast. What an AMAZING wife you have!

🤘😎🤙 Your going to have so much room for activities with that big ol 4 door Sedan cabin on there.

All hope's meals look well balanced and yummy!

Give me all the tedious content! I gotta get through the work day with something!

watching the weld on an oled monitor it feels like i do need my hood on lol

after this one complete, put the holy grail square body on the yota frame and build a crawler out of that..haha..

sorry dude im going with clint builds it with rory, never was a limey lover except for triumph tr6 cycles /dirt

You guys rock!!

Lol. You're worried about how to access the grease fitting on a bushing that will never ever spin, since it's now a stationary trans mount and not a control arm bushing.

To bad you didn't make this a longer video with more things getting completed.

Couscous might sound fancy, but it is not. It is bleepin yummy though!

Can you explain why you put the bushings on the end of the transmission cross member?

Man U guy got a lot of time to finish the sema build………y’all lucky bc most peeps have only 20-30 days to start and complete a build 🙌🏻

Chicken tenders and fries yummy 😊

you could just use water soaked frozen rags

do you not foresee any problems with rubber mounting the engine and solid mounting the transmission??

This isn’t just a SEMA car it’s a SEMA car with a $20,000 budget which is pretty insane.

Was that a wishing well Solvent tank?

😎

Matt, please make sure the killer dowel pin has been addressed in that engine! Hate to see it destroy itself on the trail.

what blade is that on the chop saw

I'm not familiar with diesel engines, but why do they weigh so much? I'm curious about why the need for the extreme weight. Thanks!

Skid plate 😂

flat paint will dry quicker than gloss but it has zero protective qualities due to being so porous. the glossier the better. people found this out the hard way when flat painting cars were the rage. they found the best way to have a flat finish that was protective is to paint the car in gloss then finish with flat for looks.

Not for nothing but do you really need a grease zert on the transmission crossmember? Once its mounted it doesn't move. There is no real flex there so don't think its going to matter. That said I think you guys build is the best one out of the build challange vehicles and yes I vote every day for you guys...🤓

What the heck is a coosecoose?

When you are welding, It would be nice if you could film through a welding mask some times so we can see what you are doing through your point of view.

You should toss that ac compressor back in and turn it I to an air pump

13:27 Content cleaner?!! Freudian slip much???

0 sugar?

thats just backwoods powder coating lol

I want to come work with you for the lunch ladylies food mmmmm mmmm good

A thousand-pound motor in a rock crawler. What is this backward world?