Making a $30 HDMI Camera Monitor

Подписаться 572 тыс.

Просмотров 211 тыс.

50% 1

My Shop: www.scottyujan...
All music by Cameron Luck: tinyurl.com/ca...
My Instagram: / scottyujan
All links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you for supporting my channel!
3D Printed Design STL: tinyurl.com/di...
♥ Support my Channel ♥
• My Shop: www.scottyujan...
• Paypal - rotf.lol/paypalme
• Coffee - rotf.lol/coffeeme
⚙ Project parts ⚙
5 Inch Monitor
• Amazon: amzn.to/2ZhgwkS
• eBay: rb.gy/yhdhcy (cheaper on sale)
4x and 1x AAA Battery Holder (Variety pack)
• Amazon: amzn.to/3icfwpn
• Amazon: amzn.to/338Seuo (on sale atm)
• eBay: ebay.us/vyl0bB
Buck Converter Step Down Module
• Amazon: amzn.to/35fkw97
• Ebay: ebay.us/6hteIg (cheaper)
Toggle switch
• Amazon: amzn.to/338RXaB
• eBay: ebay.us/siutCW (cheaper)
Tripod Mount 1/4-20 Nut
• Amazon: amzn.to/337aXq7
• eBay: ebay.us/lRH7dQ
• Lowes: low.es/328A5NW
30 cm HDMI Cable
• Amazon: amzn.to/2R7o4lx
90 Degree HDMI Adapter
• Amazon:amzn.to/2FlpR3D
• eBay: ebay.us/ZxYAvt (Cheaper)
----- Tools Used: -----
3D printer used in the video
• Ender 3 Pro: bit.ly/3kcSKz0
Coping saw
• Amazon: amzn.to/2GEWtGu
• This is the same one I used except I painted the handle on mine white :P
#DIY #Camera #Monitor

Хобби

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 493

@marissacui6766 4 года назад

My favorite design is the duct taped one

@Nathansomething 4 года назад

Same

@hariharanrajaraman7151 3 года назад

ting VLOGGER

@xthyabx289 Год назад

same

@integza 4 года назад

Is really rare to find such a great quality channel with such few subscribers Also I actually need a monitor for my camera ahaha

@Tsukay. 4 года назад

Hey Integza and Scott I love your content !

@ScottYuJan 4 года назад

thank you so much man! your content is amazing. i really appreciate the shoutout!

@MR_Rabeel 4 года назад

Im here because of your story

@lliaolsen728 4 года назад

Well thanks to you both because now I'm here and subscribed. It was the quote in the cat pic that really got me. 😅

@Matteogambitta 3 года назад

that's true!

@StormBurnX 4 года назад

I love how much in your house you've customized to be so simple white - not just the drill of course but even just looking at your desk there's a lot of thoughtful consistency there!

@Mamelukkikala 4 года назад

Well this is funny, well edited and usefull material. I'm pretty sure that youtube will be your career if you keep making videos with this amount of quality.

@ScottYuJan 4 года назад

Thank you so much. I would love that. Hopefully someday! haha cheers!

@christianumipig5877 4 года назад

I'm telling you right now, you're gonnna be a big thing dude! A niche DIY artisan with modern tech interests and videos in the style of Camera Gear and Videographer/Photographer bigs like Potato Jet, Jason Vong, Peter McKinnon, and all the other big youtubers :) Can't wait to see where you go!

@ScottYuJan 4 года назад

Christian Umipig thank you so much! this is like the nicest comment i’ve ever gotten haha cheers!

@mzzmdrn 4 года назад

Everbody calm down. His channel is growin' & developin'. Go SYJ !

@delta1inc654 4 года назад

Came here for the 24 things 3D printer, good content here as well.

@ScottYuJan 4 года назад

delta1 inc thank you so much. glad you enjoyed it!

@johnjarvis9519 4 года назад

This is incredible, the quality of content your making is astonishing. Please keep it up, you're inspiring so many people. After buying a 3d printer a while ago out of pure intrigue, your videos have motivated me to get it back up and running, and I actually found my first customer for my prints!! I'm also in Vancouver, making pieces for sculpture for a local artist. Much love!

@ScottYuJan 4 года назад

That's awesome, john! congrats on your first client, that sounds like a fun gig, and glad you're getting back into 3D printing. 👍

@marissacui6766 4 года назад

THAT TRANSITION AT 6:52

@Darthreya 4 года назад

That was awesome! I went and rewatched it after you pointed it out :D

@lliaolsen728 4 года назад

Yeah I like how it goes in and out and in

@majorredbeard 2 года назад

That 3D Model to 3D Print transition was great! Nicely done!

@MinecraftCreations 4 года назад

The quality of these videos are so insane. The pacing, the camera-work and the way you tell a story is so cool. Subscribed and looking forward to more of your amazing content!

@jsonslim Месяц назад

4:00 that's amazing how you did this acrylic bending! I dreamed about making an enclosure from such plastic, but you give me the motivation!

@alfff96 3 года назад

You do deserve some more credit. The idea isn't revolutionary, but the execution is pretty good and video edition is super fluid, feels like water flowing. Great vid!

@rexthethoughtfult-rex4337 4 года назад

Dude you’re hecka cool! Just subscribed! #PRE-1MILLIONSquad 😊

@dphiljoe4201 4 года назад

*dab

@SunnieSnell 3 года назад

same

@Inventorsquare 4 года назад

Serendipity. I came back yesterday to see if you made a new video. Love them. The transition from 3D model to the 3D print was MAJOR sick. By the way, you should set the acrylic on top of some scrap material before drilling into it to minimize flex. Something like that can hang off the edge of table to fit. My vote goes to the acrylic case because it has a better process for mass production.

@ScottYuJan 4 года назад

I'm so glad you noticed that specific transition because that took forever to line up the two shots and I was worried I was wasting my time since it's only for like a 1 second moment haha thank you for the kind words, you have some great videos! super helpful stuff. cheers man!

@Inventorsquare 4 года назад

Scott Yu-Jan You rock dude! It really is impressive editing, and thanks! Cheers!

@TinLeadHammer 2 года назад

@@ScottYuJan Don't you worry, your viewers see everything. Awesome video!

@chrisrundell7486 4 года назад

Man, your channel is amazing. I found you while looking for mods for my 3d printer, and stayed because I loved your content and how amazingly put together it is. Also, a cool idea for a future project may be a mini vacuum forming machine. They are super cool and can replicate any object in thin plastic almost instantly

@raphaelvillegas2654 4 года назад

Wow your editing skills are awesome i stumbled upon your vid where you customized your 3d printer then watched all your vids i wish you'd upload more vids like this in the future do remember us when you hit 1 millions subs cheers!!😁

@EstheticAnts 4 года назад

Got my ender3 yesterday, watched your video about 15 times already. Please do a part 2, I learn more from you then I do in school #mood

@jessicahayes4846 2 года назад

I loved the acrylic handmade version. I did this and ended up using a tool to bend the acrylic which worked out great. I wired up a different battery option but it works great. Thanks for the videos. Would love to see more 3D Printer Projects, like something just off the wall and unheard of.

@hhkk6155 8 месяцев назад

Clear case electronics look cool every time

@aimanshahrir2253 4 года назад

I kid ya not, you're my idol man!!! I enjoy watchin all your videos. Like, you can make anything out of something thrown at ya. Love to see more from ya, SYJ!

@vishanl06 3 года назад

This man deserves so many more subscribers. His videos and content are all so high quality im surprised that he's only at 50k subs.

@NeilioMan 4 года назад

White Label Drill Problems go for the Red Label next time. Awesome Video!

@raidzeromatt 4 года назад

Wtf is this drill? Did he 3d print that shit?

@IcyHell77mNRW 4 года назад

@@raidzeromatt its called "DEB-randed" , its a niche brand ... :D p.s. i am just kidding .. he sprayed it white ;) very "Diresta" of him .. ;)

@OliveDoctor 4 года назад

Dude, your videos are pure gold! Please keep it coming! Love from Brazil.

@VaultTecAi 2 года назад

The hand-made one like you said offers some uniqueness to it which I like, always been a fan of clear electronics it just looks cool. But the 3d printed one looks a little more fit and finished ofc.

@FleaMarketSocialist 2 года назад

*Props for _Goodwilling_ this DIY. Respect.

@passtheboxfox5374 3 года назад

I am honestly a sucker for transparent tech, i feel like we need more of it!

@CallMeSwal 3 года назад

5:12 I love the way you showed the circuit here!

@porfiunratitomas5429 Год назад

The handmade one its the pretiest, the 3d printed one the most practical and the duct tape one its just the best

@thiagosannafreiresilva4366 4 года назад

That CAD to 3D printer transition was slick, hats off!

@BloodyIron 3 года назад

I love both designs! I think the methods for the hand made one really makes this a lot more achievable for those without a 3d printer too!

@xraydog2011 3 года назад

Those cuts were dope with the 3d modeling and printing

@AAvfx Год назад

You're very talented , an expert in many fields. It's a pleasure for us.

@ArtyBicardi 2 года назад

My mind is blown with your level of geniouse! I don't know you but I'm genuinely proud of you I know you're meant to do great things in your life time!

@reedceniviva5756 4 года назад

always cool to see what can be done with 3d printers but really cool to see a seperate way to go about the same project

@ChChelis Год назад

The handmade one! I met you by newers vids and the refining is diferent: I mean the quality only improved from a already really good place, but now you seem like almost a wizard, with all the organizing and white tools... so is very nice to see this "improving" you by older vids. Really a fan getting more passioned about your channel!

@camelicreations4912 Год назад

The fact you have white batteries is amazing to me, you’re the best

@alecc.5610 3 года назад

Dude! Your channel and content are such high quality. Only watched two videos so far, but it's giving me inspiration for my own projects. Keep it up!!!

@Marvel3DUK 2 года назад

I like both designs but the clear acrylic one its defiantly better Love the videos

@Akidsperspective1 2 года назад

This is so well done! Filmmaking and great actual advise 😅👌

@mattcero1 Год назад

Dude! Great video. I actually almost bought a $145 Esee field monitor but at the last minute went camera HDMI out to the HDMI in of my 24" Dell monitor right on my desk and am totally happy with focus check with manual lenses. My vision isn't that great and even with a 5" field monitor on my camera, 52" away, it would be hard to see and adjust for focus checks. The only drawback is while in HDMI mode, I can no longer use this monitor as an LED light and that function will be missed as it's my key light and I use MS Paint full screen with a white pallet for it. Thanks dude, from a fellow Seattle-ite.

@Jossy.mp4 Год назад

I like the design where its taped to the camera

@BurakBuu Год назад

Oh man! 1:18 that Transition was 🤌!!

@talawas 4 года назад

You earned yourself a subscriber. I'm not even into DiY or 3D priting but I find these videos still interesting. Insane quality on vids. Hope you will get more subscribers.

@ScottYuJan 4 года назад

thank you so much. i'm glad you enjoyed my content :)

@Kato414 Год назад

Your work reminds me of some of the things I admire about Tom Sachs’ work. My favorite part of this video was the cat picture annotation at the end. That could’ve been trash, but you’ve imbued it with meaning from a personal experience. That’s art, my man. My favorite kind.

@capthowdy126 2 года назад

i recently just learned that there is special bits for drilling acrylic from adam savages youtube channel. the tips are alot more pointy, bits like ur using in the video as soon as it breaks through the other side the leading edge trys to pull the bit through without cutting so it causes it to shatter or break the acrylic.

@ScottYuJan 2 года назад

I’ll definitely look into that. wow thanks

@DamnAwesome 3 года назад

The hand made one looks wayyy cooler!

@ewhyte8059 3 года назад

You sold me on the Applesque 3-D printed version! Oh yeah when drilling holes it’s always prudent to drill a pilot hole with a bit much smaller than the one you’re going to finish up with.

@Jopoiato 3 года назад

Dude, your videos are amazing, the cuts, the composition, the transitions! Keep the good Job! Incredible!

@Abhyuday_rai 2 года назад

A 3s lithium ion removable pack would be a great idea. Like a modular battery that charges with usb type. Using one of those trigger boards

@fordtoy2000 2 года назад

The 3D printed one was dope, but that hand-made one looks a little more attractive as see-through and it is something viewers like myself can strive toward. Thans for the video.

@bartfransen9979 4 года назад

i first watched your video on how to upgrade the Ender 3 pro and did almost the same upgrades. But on the start screen I came across a video of you and had to watch it through your great edit skils and nice explanations !!! Keep it up and you will reach 100k first then 500k and then 1 million, good luck and I'll keep watching your videos !!!!!

@59KYHighlander 2 года назад

suggestion on mounting that screen. Get a 1/4 20 threaded rod and run it up through the housing you made. That is the standard for camera mounts. Then use a barrel nut in 1/4 20 to mount to your tripod and then mount the camera on top of the housing where your rod comes out. Rod straight through so you have strength and don't damage camera.

@0candlestick0 4 года назад

next year this dudes gonna have like 200k plus subs, gotta give it to the hand made one, i subbed for the 3d printer video but the hand made one makes me think about the old n64 controllers with the see through purple plastic and i love it. 3d printer one also looks dope. you could probably make that into a business tbh

@bobmay5892 2 года назад

Apart from me learning something, you are great entertainment.

@pattimaclaughlin8059 3 года назад

Very cool. Loved the hand made one...just cuz there is NO WAY I could do that. But it was fascinating to watch. I needed a monitor for my camera. It's hard to see deep space through my view finder. But I need something weather proof. Thanks for the video!!

@PolntBlank 4 года назад

Love the drill all white, i peel my labels off everything and paint also. I like your style

@nord7556 4 года назад

Came for the tutorial, subbed for the storytelling skills! 🤩 Also, can I plug in any power bank directly or I'd need specific converter? Is it possible to use old phone's lcd display?

@ScottYuJan 4 года назад

thanks! and yes you can use any power bank as long as you use it with a usb to micro usb cable. You technically CAN also use an old phone's display but it's a LOT harder and costly. you would need to find a compatible controller board for that display and those can be pretty pricey and bulky sometimes. Also not the easiest thing to find too. good luck!

@pocketmage124 4 года назад

I can see you going far with such creative and entertaining content! Awesome once again. I haven't regretted subscribing for even a second!

@RestoreTechnique 2 года назад

Brilliant content, so well made, a pleasure to watch ✌️

@miliohm 4 года назад

I really love the way you edit the videos

@jsonslim Месяц назад

5:32 lol, it happened with me sometime exactly like that, the second time I thought the same thought - "this time I'm not going to be electrocuted" - it was one second before it hit me again :D

@jordainewisdom 3 года назад

I’ve been watching some of your videos. I like your editing and your ideas. Can see that you put a lot of time into these

@AdmiralSym 4 года назад

That was a super slick transition from 3d model to print bed damn dude!

@masterpig5s 2 года назад

Yes Thank you Someone’s gone and done. I thought it was possible but this dry runs and proves it

@TelevisionCrews 3 года назад

Definitely you are a genius. I had no choice but to subscribe after watching just the first 50 seconds. Looking forward to watch more videos from you!

@elporongolo8376 2 года назад

This editing is so good keep doing this forever plz

@drug2 2 года назад

This is absolutly Brilliant :) Awesome made, great quality of videos and all infos and parts are listed. This is just perfect

@ChrisThedudenurse 3 года назад

Dude your editing is really good. I really enjoyed this video.

@samionurzaim 2 года назад

I am like "How come I didn't think of this". Thanks for the idea.

@kzdaniux4448 4 года назад

Watching your videos makes me want to make my own RU-vid channel. Best wishes and luck.

@AcridDragoon 2 года назад

stumbled across your channel with the mac mini video and I'm just in absolute awe of your skill. keep it up!

@matthieuzglurg6015 2 года назад

hey, just so you know, there is accesories made for cameras like your Fuji that only have a tilt screen and not a fully articiulated one. If all you want is check composition and focus, well buy a mirror that you plug into the hotshoe. You can even do it yourself for even less money ! (Though it cost like 10 bucks off amazon so definelty check if that's worth it lol)

@Tgspartnership 2 года назад

good trick, using the cooker to form the acrylic

@MaRcO_PoLo_2020 2 года назад

@1:29 thank you for giving us. Other views of options. Great video! Keep up the good work.

@Ridu172 2 года назад

This is exactly what I was looking for and its crazy how amazing your content is!

@eggsandwhichian 10 месяцев назад

creativity? Handmade. more sleek and professional? 3D printed. My fav, handmade. its transparent and thats badass.

@ClaudioBOsorio 2 года назад

I'm just gonna say it. It's hard not to subscribe to your channel it's very fun to watch. +1!!

@originalsuki 2 года назад

wow. Such a solid effort on this video, I'd feel foolish not subscribing. Just great.

@snithereens 2 года назад

Your video transitions are dope! esp from the small monitor to main playout! Keep it up. Just subbed.

@connorseay6839 Год назад

I love your humor

@jonathangustafsson2768 4 года назад

Nice video dude u are just the youtuber I was looking for. Keep the diy videos coming :D

@thamomentum 3 года назад

YO this guys videos are on anther level ! Scott! good stuff man, so glad to see a fellow Canadian with a growing channel - and as much as I am an avid 3D printer/builder, the handmade one from acrylic looked freaking dope!

@embeddedsystemsguy 3 года назад

"Buy To Build, Not To Consume" Love this quote.

@TechTune 4 года назад

Another very nice video from SYJ, keep making the amazing content!

@maxdiver7250 4 года назад

The end of the video with the cat is awesome ! I really like the delivered message. Keep the same spirit 😉

@rogerlai3197 6 месяцев назад

Love the handmade one !!!!

@damondarnell 3 года назад

They are both sweet man good job. I just started learning Fusion 360 to try and start designing my own parts and prints.

@beard-monster 3 года назад

This was awesome. Didn't know you could bend acrylic like that. :)

@grivb7771 Год назад

Found one of your videos by accident, it's amazing!! ✨

@alexkrauchanka7660 3 года назад

Love every single video, that attention to details! But dude, what is this sick song at 7:53?! Can't find it anywhere!

@BrianLough 3 года назад

The acrylic one was awesome!

@simoneblax 3 года назад

Man you need to become famous on RU-vid. I'll start recommend you to everyone. Amazing video quality, great personality, wonderful storytelling. Man keep going! You're unbelievably smart 🤯 edit: I couldn't watch it till the end before writing the previous text, I prefer the 3d printed. More stable, clean and professional. Nice tip heating the front plastic of a paint, never thought about that! Again, great, great, absolutely great job. Hope to see more of your videos.

@fezii9043 4 года назад

This is a top-notch video, very VERY well put-together

@sjicho 3 года назад

You're too talented bro. I''m glad I stumbled across this channel.

@StitchyX8 4 года назад

Channel is super creative and the edits are super polished. Great job!

@luiscamara1 4 года назад

WHAT THE HELL ARE THESE TRANSITIONS. Dude... You're gonna go far!

@ZB. 4 года назад

So glad to find this channel. I love your ingenuity!

@FffjjjaAa7 Год назад

I like acrylic for its looks, but it has holes which is not functional. Maybe you could make combined version based on acrylic with 3d printed parts added for holes and secured with threaded inserts. It should look cool.