In this video I fabricate a custom stainless steel exhaust for my 1990 Mazda B2200 minitruck, it consists of the eBay stainless steel exhaust header into a 2 inch 5 ft long stainless steel pipe that's bent somewhat using a very cheap pipe bender. Then a stainless reducer being used to expand the diameter to a 2.25 inch roughly 9 3/4 inch long piece of stainless steel pipe into a Flowmaster delta 40 2.25" in 2.25" out stainless steel muffler. That goes into a 3 foot long stainless over axle pipe into a 20" long pipe then a 45° bend pipe (although I would recommend using a 60 degree bend or a 90 degree bend for better clearance of the leaf spring shackles) into more pipe that I don't know the length of because we didn't measure it we just cut it to the length I wanted for appearance. the muffler is clamped on both the in and out ports of it and the back of the over the axle pipe is clamped to the rest of the exhaust out with all other connections being welded. the materials that I bought were, stainless steel two bolt flange (1x), 5 foot long 2 inch stainless steel pipe (1x), 5 foot long 2.25 inch stainless steel pipe (1x), 45° bend stainless steel pipe (1x), 3 foot long 2.25 inch over axle stainless steel pipe (1x), 2 inch to 2.25 inch stainless steel exhaust reducer (1x), Flowmaster delta 40 2.25 inch in 2.25 inch out stainless muffler (1x), step 2.25 inch exhaust clamps (3x), and stainless steel exhaust hangers (2x).
muffler: www.holley.com/products/exhau...
#minitruck #b2200 #exhaust
11 ноя 2022