Тёмный

MAKING A DRAUGR SILICONE MASK PART 8!!! 

Creature Flesh Masks
Подписаться 1,3 тыс.
Просмотров 4,6 тыс.
50% 1

SUBSCRIBE TO JOIN ME IN CREATING MONSTER MASKS AND PROSTHETICS! FOLLOW ON INSTAGRAM / creatureflesh -------------------------- LINKS TO THE TOOLS AND MATERIALS I USE (paid link)--------------------------
UK LINKS:
Sculpting Tools:
Stainless steel carving tools-amzn.to/3SWjvdk
Wooden dotting tool- amzn.to/3IkkNKe
Magnetic tool rack- amzn.to/3V5y94C
Metal clay ribbon tools- amzn.to/3InLf5O
Wooden clay, ribbon tools - amzn.to/3IoloL0
Naphtha solvent- amzn.to/4c3aA2G
Mini slow cooker- amzn.to/3wFeD4W
Oli based Clay:
Monster clay (soft) - amzn.to/49Cxdci
Monster clay (Medium)- amzn.to/3TkHRPd
Monster clay (hard) - amzn.to/3IklvHo
Chavant (soft) - amzn.to/48CQ4D2
Chavant (medium) - amzn.to/3IkyCsj
Chavant (hard) - amzn.to/3P5n4wP
Moulding and Casting:
Fibreglass- amzn.to/3V2gFWI
Paint brushes- amzn.to/3v5ZyJ3
Mixing sticks- amzn.to/3TktP09
Large mixing sticks- amzn.to/3wIAxo0
Small Mixing cups- amzn.to/49XH64d
Large mixing cups- amzn.to/49Cy4d0
XL mixing tub- amzn.to/3TkZxub
Paint mixer- amzn.to/3V2KSF5
Vacuum chamber- amzn.to/49Oi33A
Air drying clay - amzn.to/3IrUce8
Painting:
My favourite Airbrush- amzn.to/3SZWVRe
The BEST!! Airbrush compressor- amzn.to/49FKdOG
Iwata tool kit- amzn.to/3v2trtK
Iwata needle- amzn.to/3wBDCpQ
Airbrush cleaning kit- amzn.to/3wEGN01
Nitrile gloves- amzn.to/3TiQZEa
Hair punching:
Hair punching needles- amzn.to/49Z3RVk
Polystyrene head- amzn.to/432rdqY
US LINKS:
Sculpting Tools:
Stainless steel carving tools- amzn.to/3DlNuEa
Wooden dotting tool- amzn.to/3DjuqpZ
Magnetic tool rack- amzn.to/3NVRnod
Metal clay ribbon tools- amzn.to/3K3wTsu
Large clay ribbon tools - amzn.to/46CW7XY
Clay ribbon tools - amzn.to/4915EcU
Oil based clay:
Chavant clay medium - amzn.to/46TyZFa
Chavant clay soft - amzn.to/45DVego
Chavant clay hard - amzn.to/3rS7LPI
Mini slow cooker-amzn.to/44uQl9S
Moulding and Casting:
Vacuum chamber- amzn.to/3FwiWjX
Fiberglass - amzn.to/46BxB9L
Resin - amzn.to/46Ysi40
Full face respirator - amzn.to/3Q2Zssi
Large mixing sticks - amzn.to/48YMe8B
Mixing cups - amzn.to/3tHoVjx
Large mixing buckets - amzn.to/402np7A
Disposable brushes - amzn.to/48XNAQR
Air drying clay - amzn.to/46FLJyv
Platinum silicone:
Best mask making silicone - amzn.to/46CUcTi
Mould making silicone - amzn.to/3tCT9UF
Prosthetic making silicone - amzn.to/400xHVX
Painting:
My favourite Airbrush - amzn.to/44SKo6c
The BEST! Airbrush compressor- amzn.to/46YwwcH
Iwata tool kit- amzn.to/3pTgcZU
Paint mixer - amzn.to/3FmjwRw
Hair punching:
Hair punching needles- amzn.to/3XXpTTG
Hair - amzn.to/494xOUj
Polystyrene head - amzn.to/3Mb4im1
Curling wand - amzn.to/46Bya3n

Опубликовано:

 

28 июн 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@MUSICBYDUBBS
@MUSICBYDUBBS 5 лет назад
Awesome work again dude!
@BOXCARARTZ
@BOXCARARTZ 4 года назад
These videos are gold thank you so much
@creaturefleshmasks
@creaturefleshmasks 4 года назад
Thanks!
@KOllectivebykellyodell
@KOllectivebykellyodell 4 года назад
amazing videos thank you
@chrisscott1083
@chrisscott1083 5 лет назад
Thank you so much for being willing to share and teach. I truly appreciate it. Your tutorials have really helped me a great deal and the knowledge is priceless. Do you recommend using liquid fiberglass or just getting the sheets of it for making the mold for the mask?
@creaturefleshmasks
@creaturefleshmasks 5 лет назад
+Chris Scott no worries chopped strand fibreglass is what I’d recommend
@thewazir9064
@thewazir9064 2 года назад
Iam indian ilike yours work
@leticialeite3107
@leticialeite3107 3 года назад
Muito bom , cool 😎
@ablack9431
@ablack9431 4 года назад
Brilliant video, may I ask what was the silicone you used for the test pull please as this is a great idea.
@creaturefleshmasks
@creaturefleshmasks 4 года назад
+G Black thanks! It was still a platinum silicone but it had a higher shore hardness so not as soft as the silicone I’ll be using in the final pull. You could use an rtv silicone that’s cheaper for a test pull but it will have some shrinkage, should determine wether the mould works if not though. Hope that helps
@Justimight
@Justimight 3 года назад
First off I absolutely admire how you go into step by step and make it clear to listen too Secondly Could this mask wearable? What i mean is if the method for the silicone used here was to be done again but with better material Would the mask be wearable? Or is the other method mandatory?
@creaturefleshmasks
@creaturefleshmasks 3 года назад
Thanks! Yea it’s totally wearable when cast with a soft platinum silicone. If you watch the later videos you’ll see the final result
@chrisscott1083
@chrisscott1083 5 лет назад
Awesomeness. Thank you so much for the information. I have one more question regarding the scale you use to measure with. What kind of gram scale is it? What is the weight limit on your scale? I should probably rephrase by saying where can I get a gram scale at for measuring and what is the weight limit on the one I should buy?
@creaturefleshmasks
@creaturefleshmasks 5 лет назад
Chris Scott I just use kitchen scales I think they have a limit of 5kg. Iv never needed any more than that
@chrisscott1083
@chrisscott1083 5 лет назад
Question: What kind of resin would you recommend for brushing over the armature? Or would you recommend fiber glass?
@creaturefleshmasks
@creaturefleshmasks 5 лет назад
+Chris Scott I use a gel coat for the initial layer followed by a general purpose resin with fibreglass. You could go for a polyurethane resin but they’re a bit pricier
@makeupmaster1
@makeupmaster1 7 месяцев назад
Where was the separator!😢
@chrisscott1083
@chrisscott1083 5 лет назад
Hello again, I am in need of more information, for example, what type of gel do I need and finally, what kind of gram scale do you use? I ask because I unfortunately live in a state that is very backwards and for me to go in to purchase the items and to ask where they are, they look at me like they are totally clueless or like I'm crazy. So all of the details I can get would be very appreciated. Today I searched for a gram scale at several places that should've had one and all of them didn't have it or they didn't know what kind I needed. So if I can get the brand name or how many grams it can handle, that would be helpful in finding the right one that I need to use. And knowing what kind of gel you are speaking of would be very helpful as well. And if I would have to use something else other than fiberglass, is there something else that I could use with the risen and whatever the gel is?
@creaturefleshmasks
@creaturefleshmasks 5 лет назад
+Chris Scott the gel coat is a polyester resin, it’s designed to capture detail before you apply the fibreglass and resin mix. I use about 500g to 1 kg of gel coat but it all depends on the size of your project. If your in the US try a company called brick in the yard.
@thewazir9064
@thewazir9064 2 года назад
Who silicone used in this mask please tell me sir
@monkpool
@monkpool 2 года назад
I remembered he said Gel 10, Gel 25 and Gel 00
@godfrey7960
@godfrey7960 Год назад
Why does the paint peel off when it dries after I finish my work, what is the reason?
@creaturefleshmasks
@creaturefleshmasks Год назад
Are you painting with silicone?
@godfrey7960
@godfrey7960 Год назад
@@creaturefleshmasks Yes, when I draw with it, it peels off after drying when I touch it
@godfrey7960
@godfrey7960 2 года назад
Why did you stop posting videos?
@creaturefleshmasks
@creaturefleshmasks 2 года назад
Covid had an impact plus moving workshops among other stuff, but we’ve got a new video on its way!
Далее
MAKING A DRAUGR SILICONE MASK PART 9!!!
6:59
Просмотров 3,5 тыс.
3D Printing Molds for Silicone Masks!
11:16
Просмотров 156 тыс.
skibidi toilet 76 (part 1)
03:10
Просмотров 13 млн
TESTING SILICONE CASTING AND PAINTING!!!
23:25
Просмотров 2,5 тыс.
Making a silicone mould using the brush-on technique
35:29
I sculpted a GIANT MONSTER and scared my friends...
17:43
MAKING A DRAUGR SILICONE MASK PART 7!!!
8:52
Просмотров 3,2 тыс.
DRAUGR SILICONE MASK FINISHED!!
16:06
Просмотров 2,6 тыс.
Make a Silicone half mask Mask $74
22:30
Просмотров 22 тыс.
Make Your Own Optical Lenses
24:29
Просмотров 462 тыс.