Thank you 💜 😊 most definitely, they would love something like this. I never was a skull person before I started making these but now I love them. Thanks for watching
I love this mold. I need to try one like this! I tend to get bubbles on the back of the head at the base and the eyes. This turned out really cool! I've been doing clear with alcohol ink in this mold lately. I haven't tried any holographic inserts yet either.
Clear with alcohol ink in this mold sounds amazing 😍 I'll have to try that soon. It's so deep I bet you can get some really cool effects with the inks in it. Definitely try the holo inserts if you can. They're so fun and easy to use. Thanks for watching 🤗
Thanks Rose 🤗🌹 I had never made a skull before. I can't wait to make some more. I bought a cricut to add vinyl decals to my artwork. I need to learn how to use it 😅 thanks for watching 🤗 With your ashtrays do you add a metal plate in the center to help with the heat? I have someone asking for an ashtray but I have never made one before 😅
No way, that is so cool. I love to hear that. Keep it up. Ive heard from others, These sell really well for them too. A lot of people collect skulls. And it's nice because the molds aren't an arm and a leg so you can get several molds.
Awe thank you so much 😊 I appreciate you. I have an etsy shop where I sell glitters here's the link if you want to check out my etsy shop www.etsy.com/shop/NaptimeCreations206?ref=search_shop_redirect
Ive watched a ton of your videos using holographic inserts and I still don't understand how they work. Like how are they able to give the holo effect over and over?
Holographic is actually a micro texture. The silicone rubber takes on the micro texture from a diffraction grating sheet as it dries. Then your silicone mold is Holographic. Adding it to your resin Creations, the resin takes on the holographic micro texture from the silicone mold as it dries. Making your Creation holographic as well 🤗
Hi, sometimes the codes only work on certain items. My codes only work from let's resin off Amazon not from their website. Molds- naptimemold Other items- 10naptime
Very cool! I was wondering since you pour in multiple layers & since the holographic is reusable could you pour it more shallow & place the film on it? I was wondering if it would give a more 3D layered look? Or would that work?
Thank you, unfortunately no. It only works on the last layer. If you pour over it at all the holographic effect disappears because the holographic is actually a micro texture and pouring resin on it takes that holographic micro texture away
Bonjour et merci pour le tuto c'est génial.j'aimerai savoir comment s'appelle la feuille qui donne tous ses reflets et où en trouver merci bonne journée
Hi Tish! I just want to say that all of your videos, but *especially* this one and the purple glitter skull, are my absolute favorites! So much so that I now have two of the skull molds, the set of the Let's Resin transparent dye (love that Sky Blue!), and the set of holographic powders. I've already poured my first skull using the blue holographic powder and black-tinted resin (so sparkly!), and I'm now working on my second one, trying for the pretty clear blue. I also ordered the holographic insert from your link above, but I couldn't wait for it, I had to start pouring right away! 😄 I do have a question, though - how many drops of the transparent dye did you use per 4 ounces of resin? I did four in mine (plus one drop of Brea Reese's Iridescent Liquid Glitter), but I was trying for the pretty blue color you have in this skull here. Thank you for all of your creations - I'm so glad I subscribed! ❤
Awe thank you so much, that makes me so happy to hear. Im so glad you are making these too. They're so fun to make. I need to make some more soon 😊 For the sky blue resin dye in 4oz I would only do 1 drop. 😁 Thanks for watching and subscribing. I appreciate you
Very cool. I've just recently started making resin castings and I'm having issues with small bubbles. I've heard that the resin should be warm, like 70 degrees, to avoid this. Also, can I use a vacuum chamber, or will the resin begin to cure in there?
Thank you and thanks for watching. To avoid bubbles completely you need a pressure pot. I don't use one, the resin I use has hardly any bubbles it's a 2 to 1 ratio casting resin. The temperature of the resin has nothing to do with bubbles its more about the viscosity of your resin. This is the resin I use if you want to check it out. Discount code NAPTIME20 will save you 10% www.theepoxyresinstore.com/products/crystal-clear-epoxy-resin-for-decorative-casting-and-crafting-liquid-diamonds?variant=47321785996
Great video, I haven’t started resin yet, getting all the moulds, resin tints and glitter together lol. I was wondering if you could after pouring the first half if you could add the holographic silicone then, remove, and pour the rest and use the silicone hologram again?
Thanks so much and thanks for watching 🤗 you are going to love working with resin you can do a lot of cool projects with it. To answer your question, that wouldn't work. You can not pour over the holographic layer at all or it will disappear. The holographic effect can only be added on the last layer. The holographic insert silicone mold is reusable over and over the holographic effect stays on the silicone mold.
I love this so much Tish. I love skulls, but I haven't made any yet. I like that mold a lot and I think I'll order one. How long did you wait in between the layers? I didn't see any lines. 💜
Thank you 🤗 I think this mold is 14.99 not bad at all. I want to make more and add a rose to it. I think that would be pretty. I waited 24 hrs between layers 🤗💙
Thank you 😊 I buy it from this etsy shop www.etsy.com/listing/1198566193/holographic-silicone-inlaysinserts?click_key=db2583b6a27c8a7820507c90fa50701bb5fab47b%3A1198566193&click_sum=cb40ee01&ref=shop_home_feat_1&pro=1&sts=1
Skull silicone mold used in today's video is from @LET'S RESIN Discount code naptimemold will save you 10% www.amazon.com/dp/B09H2BYT1P?maas=maas_adg_EC1E393ACD9F9FA0F85AF58F8644CB15_afap_abs&ref_=aa_maas&tag=maas
Thank you so much 🤗 I'm not sure if that window film would work. I tried it on a crystal and couldn't get it to lay down flat without a ton of airbubbles. It's much thicker and less pliable than these silicone inserts.
So sorry I forgot to add the link to the description box. Here's the link www.etsy.com/listing/1198566193/holographic-silicone-inlaysinserts?click_key=847c9fe109389a3fe3ade86e13084c4625217f7d%3A1198566193&click_sum=170a3451&ref=shop_home_feat_1&bes=1&variation0=2558729163
Can I buy the holographic Silicone Inlays on Amazon somewhere? I did a search but I'm brand new to this and trying to come up with a list of things I'll need to make my very first epoxy resin mould. I've only been watching videos where crafters have been using resin and currently do not have any of the products I need to do this. Perhaps someone can help me come up with a list of all the supplies I'll need?! Thank you.
Hit the more button next to the title of this video and the description box will open with direct links to everything. This project is more advanced. I would try making a keychain or coaster 1st before trying this project if you have never worked with resin before. You can't get the holographic inserts off amazon. I buy them off etsy www.etsy.com/listing/1198566193/holographic-silicone-inlaysinserts?click_key=df10b0b172a85f2d7087819539bbda5fd5bacb71%3A1198566193&click_sum=51a16be6&ref=shop_home_feat_1&pro=1&sts=1
Etsy, her shop will be back open in a few weeks. She just moved www.etsy.com/shop/MoxieAndSoulResin?fbclid=PAAaaVaxxJze5pKbEpkS__GiF_BQHULzX9Pb6NAIOZEGIBMk3kcER0KlNMwOs
It depends on what I'm making. I mostly use liquid diamonds for projects like this. But it's not good for thin projects like bookmarks, thin earring molds etc. It's a 2 to 1 ratio epoxy I also like the let's resin brand epoxy it's a 1 to 1 ratio and its good for thin applications but it has more bubbles than liquid diamonds. Liquid diamonds has no bubbles.
@@naptimecreations you're amazing. Thank you for taking time to respond. I had searched up tutorials on using holo inserts and found your vid (my favorite I watched. ) & am so impressed with this piece. Had to follow ❤️