Making a Leather Knife Sheath / With Fire Steel 

Just a hint for contact cement: apply to both surfaces with a very thin coat, then let both surfaces dry for several minutes. Once dry, press the surfaces together firmly. They will bond instantly and will require hardly any clamping.

Thank you for this bro. I need this for the Knife I created out of leaf spring.

Very nice work. ,a side note for you ,olive oil works great on leather ,I've been using it for 30 years and it's great. Thanks for the videos you take the time to make.

Never have made a knife. But after watching your videos. I think Im going to give it a try. Thanks

WATCHED BOTH VIDEOS, FROM THE RUSTY FILE TO THE FINISHED PRODUCTS HERE - YOU DUN GOOOOOOOD! - BRAVO! I BET YOUR WIFE LOVED HER HAND-MADE PRESENT! - I ENJOYED IT ALL, GOOD WORK, KEEP IT UP, LORD BLESS YOU BOTH!!!!!!!

I use a little piece of elastic for my fire steel lanyard. That way it can stretch around itself easily and stays secure in the loop. Nice job on that sheath.

I know this video is two years old but did anybody else notice the secret ingredient added to the water for making the leather supple??? Yep! dog drool! 🐕

Really enjoying watching your videos. Loved this one a lot as I wanted to learn how to build a sheath with a loop for my fire steal. Thank you again for taking us into your shop and sharing your passion.

I'm just so fascinated by your skill in craftsmanship. Watching the video teaches me to be more patient and precise in measuring.

Jesus! Look at that thickness of the leather.. Am loving this show Sir.! i'd love a cpl. sheath's from you for sure. Dam-it, am very jeoulos. Very very nicely done. Most Thank-you !!!!

I MAINLY REPAIR leather and sails, for myself, so use the original holes if i can, i use sailmakers needles which are pointed. i learned that you pre-drill for the stitching, and that grooving tool is great, i noticed your needles had rounded or BALL ends, much easier, as they wont pick up the first thread thro the hole. i like also your wheel spacer for marking stitch length, - i bought one some time ago, without knowing what it was for, but then figured it out, i knew it was something I could use somewhere sometime, - never too late to learn , - SAILOR 75 years old :) - THANKS I WATCHED your knife making video first, then searched for this link..... :)

Excellent job...instead of wet hand forming, use a Food Saver, and vacuum seal it for about an hour. Works great! I do that with all my sheaths and holsters. Saves time and works great!

Happy Wife... Happy life!!!! Good job!

I am very new working with knives and you have given me a lot the things I should be doing. Even better are the things you tell to everyone, very calm, and even shows the things that you show your mistakes. This is great and I watch every night!

Man it’s amazing the level of care and thought you put into everything you do. I know this sounds a bit dramatic, but they just don’t make nice sheathes like that anymore. You buy a mass produced knife with a sheathe it will have nowhere near the care that was put into this one. Thank you friend

Nice film, thanks!!! 😇😊

You make this look so easy.

Nice job ! For the firesteel loop, 'don't need to sand it for thickness, just put it back into the water and clamp it hard into the vise (more material = stronger) ;)

Yet another great video!

I really enjoyed watching you create the sheath.

Nice 👍🏽

Beautiful work buddy!!!!!!!!!

Real Craftmanship , and the riffs on the guitar was kicking goooooooooood play it again Art Craftsmanship :) Play it through your vedios please .

i'm homrless and have no resources {money} to support your channel, however, i want to thank you for your time and knowledge.

I like your idea, of the firesteel sheath, with, the knife sheath. I'm going to incoroporate it, into my next sheath, for my new, bone-handled knife.

As ever a great video. It’s always a pleasure watching you work.

Amazing knife and sheath, thank you for sharing this build with us! Know how hard it is to document and film especially when there are power tools involved. Thanks again!

Very happy to find your videos. Great narration, enjoying learning how to do this while watching your videos. Thank you

Very cool! Thanks for sharing the knowledge. Gonna try making my own.

Awesome work. Now I am off to make my own. Thank you

Wow! Lucky wife! Excellent video. I hope to make a knife like that for my wife one day. Cheers!

Learned a lot from your video my friend! Thank you!

Great job!. Love the video!

awesome thank you so much for sharing your knowledge I learned a few great pointers , it is appreciated

Nicely done , you answered all my questions on top it. Thank you

Beautiful knife and a beautiful sheath to go with it...I would gladly buy this very knife and sheath if possible...regardless,very nice work.you did a great job.your wife should be very happy with this level of craftsmanship

Beautiful work , again calming video

That's Beautiful....must love your wife a lot!

Great videos. Could you make a short one on the tools you use most and an explanation on how you made your forge. Keep up the great content!

Nice work! I've been getting into both knife making and leather work lately, and I'm learning a lot on RU-vid. Learned something from your video, so thanks.

Really enjoying your videos. This one was very helpful cor learning how to combine the fero rod loop with the welt.

Awesome video ... thank you!

Excellent Video and instructions..

I’m looking forward to making one with a swinger for my Laplander.

Great video thanks for posting

Very informative - thanks for sharing.

Great video brutha, very informative and detailed...make it look easy

Great looking rig!! really nice job on everything. Im new and really enjoying your vids and style of presenting so many things I enjoy as well. God bless, and thanks for your time and effort.

Awesome video man, I want to make one now.

Hey, I really like your videos. Between your calm voice, the music, and the video production these are very easy to watch. Suggestions for sheath making...use 1/8" or 3/16" shock cord (bungee) instead of the Paracord for the tightest hold of the fire steel. Also, I just tried something that I recently saw here on YT for wet molding and it worked great. Use a vacuum sealer like a FoodSaver for the best wet mold results. Leave the knife in the sheath for 10 to 15 minutes under vacuum. Remove from vacuum bag, remove the knife and let dry. You may need to massage it a little around the handle as the vacuum is being pulled. If one side of your bag material is textured, you will need to put something behind it. I used a double thickness of file folder material cut to the width of the sheath.

Beautiful knife and sheath. Maybe a little darker leather. Also try Snow Proof for leather or Obenauf’s Heavy duty LP leather conditioner. Both are great.

A wife that requests a loop fore a fire steel must be cool.

Simple mais efficace. Bravo

Love the video i am about to make myself a new sheath so thank you.

Great work. Thank you

Really like the video. Learned a little bit. Nice work.

Wow just came across this video and this is awesome! Amazing work and love the music and style of your editing! Well done sir!

Great looking sheath. Idk if u know or not but if your leather is wet when u mark those stitch lines it marks a little bit easier

Great job

Really enjoying your channel. Want to either make some alterations to my Mora leather sheath or a new sheath if it doesnt work out. One is a fire steel holder like you have shown, two is a front pocket that would carry a small stone and maybe a Remington oil cloth sachet. Is that possible? Have you ever done it? Cheers Stu NZ

Great video.

You did a great job

Now we'd like to see your wife out in the woods starting a fire with your knife and commenting on the night while she carve some cheese or a steak whatever she's going to do with it maybe she's going to make some pointy sticks for roasting marshmallows nice video I really appreciate it I'm ready to make a few of those myself the drilling in the stitching that looks like tedious but worth it so beautiful job you did congratulations

nice work, thanks

Excellent excellent job on this knife and sheath combo. You got a another thumbs up and new subscriber!

A couple thing you should invest in a beveller and when you stitch you should lock your stitches. Also it will help if you case your leather when you go to work with it. I would detach the loop so that you get the smooth side (buff) side on the outside of the sheath. It means more stitching but it looks better. Don't bother wet forming until you have sewn the sheath. Start out by folding the sheath after casing the leather then take the folded sheath and profile it on your sander so the sheath is symmetrical. then sew it up then wet mold it.

Nice Build Sir!

nicely done.

nice job

I have a 12 inch hunting knife and need a sheath,would you be interested in making it and how much would it cost?

Great job Dustin !

Very nice. Wish I could get my beard to grow like that. Maybe in the next video 😄

Great work once again, I am new to leather work so I did not know why you cut a separate piece of leather for the fire steel instead of incorporating it into the pattern of the sheath and then you only have one side to sew down. Is there an advantage to using the separate peice of leather? In any case fantastic craftsmanship, the knife looks great too I may try using an old file.

Safety, safety, safety. Wear safety glasses when using your drill press NO MATTER WHAT YOU ARE DRILLING. Any power tool really. Eyes are irreplaceable. It is when you don't think it can happen, it does. Stay safe.

Well presented. Great job.

really nice video, true craftsman . Keep up the trade and videos Thank you ................................................JS*

Great video. Thanks!

It is important to always wear a face mask when sanding leather. The dust will not leave the lungs. So too if one is sanding antlers or bone of any sort. Its serious busness. Nice product. Have found neatsfoot oil can go away much faster than some of the hide rejuvinator past products. Maybe use both? Anyway... Thanks for the video

I love the beautiful, warm light your films have. Is that just the light in your workshop or is it deliberate?

very nice my friend. love and respect from greece.

Do you have a shopping list for what a beginner would use to make sheaths. I am a novice knife maker and well this is a natural addition to that, I'd love to start making something like this.

Great channel man very well put together and thought out. Keep up the good work. What thickness is best for knifes sheaths?

If you don’t have a 4 prog punch I use to use a fork it’s better than that Tandy roller marker and yes I also cut off the ends of another fork from the same set for the corner markers than I drilled out the holes and sewed it but the sheath you did is awesome

Just found your channel and just subbed and am gonna give a go with a sheath and fire steel combo like you are making your wife. Great tutorial and video. Nice shirt btw, I was at Farm aid in 2016... as it wasn’t far from my house...small world! Tfs. Atb, Nikki.

great job and great video!!!

So did you glue up when the leather was wet?

John here I think she.ll be very happy nice

Very nice

you might try checking out. Armitage Leather Saddle stitch in detail .

Great video

Great Job, I noticed that you put it on your belt. Guess she's out of luck. Lol. How many hours for the Knife and Sheath? I can't imagine that you could manage a profit on selling them. Definitely a labor of love.

Seriously. I want one just like this one. How much would you charge?

great video!

Hey Dustin, I like your Chanel and love your knives. All the way out here from Cebu Philippines. But any chance you sell any of your knives? Would love to have one of your custom made knives.

Damn your good at leatherwork

Question? Were did u learn 2 do all of this stuff (Craftsmanship), writer did a little of this in HS back in the 60’s, that was pretty much it. @ 72yrs.old writer is still working, R U or R U retired. UR explanation of what’s being done helps immensely. Is this just a HOBBY or UR job, just asking-David E. Thanks

How much do you sell the leather sheath and ferro rod loop holder for ??

WOW! Nice work. To be honest, I'm not a leatherworker so I would have used my sewing machine for the stitching (it's a walking foot Consew). Why? No drilling, I may use different colors of polyester thread and the actual sewing goes fast and it looks uniform.

Very nice work

Great video man, really enjoy ur videos. Would you consider sharing the pattern of your wife’s knife? Was wanting to make a knife for my personal use and really like the design. Thanks