Making a MINIMALIST Wallet || INHERITANCE MACHINING

Подписаться 398 тыс.

Просмотров 552 тыс.

50% 1

Welcome back to the manual machine shop! In this video I’ll be making a popular everyday carry item, a low profile minimalist wallet. This will be a pretty simple wallet design including a money clip, but the machining process is anything easy. I’ll start this project like I do every project, at the drafting board, where I’ll put together a pencil drawing of the build to come. The wallet itself will be made of easy to machine 360 brass, and the clip of brushed 304 stainless steel. The body includes a fairly complicated engraved geometric pattern and to help with the engraving process I’ve created a fixture plate made of 5083 ATP (aluminum tooling plate). This project is very heavy on the vertical milling machine, but I do make one brief (and welcomed) visit to the metal lathe.
#inheritancemachining #machineshop #hobbymachinist
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
And a special thanks to my "Micrometer" level patrons!
Kyle Wellman, Chrisi, mason, Paul@MountainAshMetalwork, Albin Karlsson, Alexander Wedrup, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Jacob Lamon, Nic Vulcano, Erik Frolka, Luke Brandenburg, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Paul Cox, Unknown, Merik Karman, ryker321, GrimmSaber7619, Braden Kerstin, AC Machining & Engineering, drowe1974, Joseph Merkt, Giannis65, Tusai András, Phillip Dimond, Fred Townroe, danny crawford, Trevor Bartlett, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Leonardo Asayama-Lucena, Matt.E, Simon Fox, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Austin Hadden, Sam Williams, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, John Hughes, Jim, mark petovic, Mantikor ., roh_behr, Evito, Mo SoDak, Gmoney Official, Ben Fisher, Wes, William Ackerson, Jack Fountain, Squall, Adam Caddock, Jarrett, JustPaul, Jakob Meixner, Googleminer, Dylan Scheirbeck, Phil John, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, The Big Red Machinist, Conner Bean, Ludvig Eriksson, Matze Tatzae, Adam Knowles, Saul Cervantes, Bruce Lindley, Roxan Darveau, Nathan J Conrad, Erik D. Radzius, Kilian Dauda-Board, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Patrick Bentley, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, Philip Zielinski, ???, Kevers (Adventures'N Moore), lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Benjamin Dubriske, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Esti-Mari Du Preez, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze
TIMESTAMPS
0:00 Intro
0:56 Pencil to Paper
3:07 An Onslaught of Side Projects
4:34 Turning a New Leaf. Er...
5:14 Making Sense of it All
7:41 Shimmering Gold in a Sea of Blue
10:06 Turn it Down a Bit
12:17 Rigidity, Rigidity, Rigidity
13:48 Overkill
15:08 A Less Elegant Approach
16:57 Test Drive
17:25 Surprise
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Making a MINIMALIST Wa...
© 2022 Inheritance Machining, LLC. All Rights Reserved.

Наука

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 981

@InheritanceMachining Год назад

I think the best part of all this is going to be Jake's reaction when he see's this video. He has literally no idea! 😂 Next video release will be Nov 25th. See you then!

@bendover5546 Год назад

Hope he loves it! Actually I'll like to buy one without the pattern.

@moron_with_a_voron Год назад

i just doday recived my first cnc mill (a makerdream evo one pro) since a manual mill ar lathe wouldnt fit dowm my stairs and it really opens my eyes since im now able to do projects like this 😍

@Fritz-der-Tuftler Год назад

great looking minimalist wallet if you want the brass 2 tone you could fill the groves with something like nail polish then sand it flat to make the design pop even more

@elan116 Год назад

where is the video

@jakesto 5 месяцев назад

What is your brother's middle name? I thought for a sec we had the same initials, JHS, but on second thought I think that's an A.

@JonathanShaheen Год назад

The only downside of this channel is that the content is so binge able but also so high quality that it understandably takes time in between episodes. I could watch your methodical approach all day. Makes me want to get back into tinkering

@SystemX1983 Год назад

We should insist on a 24/7 livestream of his shop 😉, as a bonus he'd have free surveillance from his viewers... nobody is ever breaking in there unseen 😂 Jokes apart, I stumbled upon this channel a week ago or so, his voice is as precise as his machining, just perfect 👍

@BZEDAKING Год назад

Exactly!

@kaidensim4592 Год назад

I've watched almost all the videos 3 times in 1 week🤣🤣

@technovelodos Год назад

I'm jealous of the person who discovers this channel in 5 years time - they'll have months of content to get through.

@victorperim3221 Год назад

Couldnt have said better.

@LobsterBisque13 Год назад

This might be my new favorite channel on RU-vid. The editing and voiceover is great, regular uploads, and a refreshing topic. This channel is going places, and I’m looking forward to it!

@InheritanceMachining Год назад

Woo hoo! Thank you very much!

@nekomancer8471 Год назад

couldn't agree more his videography is sweet and his asmr voice godly

@joeschmoe76 Год назад

Same here. Great quality content but more importantly great machining!!

@SuffolkFarmer Год назад

Agree completely 👍👍👏

@izakbaxendale806 Год назад

It's just the perfect mix of story and machinery

@StuffMadeHere Год назад

I noticed that you are using a drilled and reamed hole for locating the card fixture on the rotary table. Although a reamed hole is very accurate diameter, they generally are not accurately located. This is because the hole location will be set by the drill, which even with a spot can wander quite a bit. The reamer will follow wherever the drill went - which is by design. Its why reamers are long and noodley. If you want a hole that is accurate diameter and location you’ll have to use another process like boring. BTW not trying to nitpick. You clearly sweat the details so I thought I’d sweat some details too ;) Very cool build. I like the rotary table work to make the pattern.

@InheritanceMachining Год назад

Taking a break from integration hell, I see? Good point I hadn't really considered. If some features end up off a half thou or so I think it's completely acceptable for a wallet. But good to keep in mind when it matters. You've got me second guessing the ~200 holes I made in a fixture plate though 😂

@StuffMadeHere Год назад

@@InheritanceMachining Agree its totally fine for this application. Where it really gets bad is deeper holes. I've had a 1/8" drill wander by 100 thou over a couple inches. That is admittedly an extreme case though - I've heard it depends a lot on how symmetrically the drill is sharpened.

@InheritanceMachining Год назад

@@StuffMadeHere Damn... was your drill made of cheese by chance? You just got me curious on how gundrilling works without drifting. Seems pretty universal that chip evacuation is a HUGE factor for straight drilling in all types. I imagine that's why you always see folks pecking away at holes. More than I do at least. Probably not a bad habit to get into

@matthewlramsey Год назад

Would a mill address the wandering issue? Wondering if a set of undersize ground mills followed by reaming would be a good practice? Or do you just need to rough drill and mill with enough rigidity to both locate and take to final size?

@StuffMadeHere Год назад

@@InheritanceMachining My understanding is that a gun drill is an entirely different tool. Basically the gun drill has a built in "guide" on the end of the drill which reliably centers it in the existing bore combined with an external guide to constrain the drill from wandering. Sort of a hybrid between boring and drilling. Without those constraints - and a lot less stiffness due to the flute cutouts - twist drills are able to meander through the material without much resistance. I was told when I was learning that the evenness of the grind between the cutting edges on a twist drill was critical for getting straight holes.

@kristapsliepnieks9949 Год назад

In all the movies with deep character introduction and tragic endings, I've never felt what I did just now, when I see the tap break. And the relief when you managed to get it out. Oscar winning stuff right there.

@Nicholasmonge Год назад

“After 2 hours and 2 minutes this part is finished.” Sums up his sense of humor and attention to details. My new favorite RU-vidr.

@henk6172 3 месяца назад

And yet he still forgot another line (at 9:58 two lines down from the top left)

@winters6975 Год назад

seening your videos makes me so happy

@DancingMachine1 Год назад

As an experienced machinist I feel the need to give advice. But watching your videos it's clear that you want to figure everything out yourself, and you are honestly doing an exceptional job.

@Penggu_ Год назад

I have watched all of your videos in a day and a half. Great work man. I wish I had a grandfather like yours or a machine shop I could pass down to my future family

@InheritanceMachining Год назад

Thank you!

@AustinSteingrube Год назад

I was absolutely certain this was going to turn into an ad spot for Ridge Wallet, lmao! Thank you for your incredible videos. They are a wonderful treat to watch ❤

@nefariousyawn Год назад

I can't believe he didn't get a sponsorship from ridge wallet.

@InheritanceMachining Год назад

I didn't even know what that was before now 😂 Thanks!

@winulff7082 Год назад

I was anticipating this for almost 19 minutes. A nice segue like, "But if you don't have a traditional machine shop, you could easily buy a Ridge wallet with this 15% discount code, and get yourself or a loved one a nice gift for Christmas". Missed out on a fitting sponsor. Oh well, guess i will just support the amazing channel by rewatching some videoes again.

@camronsavell Год назад

This really feels like an old, established channel. It is shocking how new this channel is in reality. Excellent everything. I can't wait to see more videos.

@liamrafle3506 Год назад

I am a manual machinist myself and the way you work brings me so much joy, I love seeing people passionate about machining and your presentation is amazing! Beautiful work and a great setup for the rotary table!

@InheritanceMachining Год назад

Thank you so much! There's a lot of capability in these old machines. Just takes a little longer 😉

@DG-ms5dz Год назад

I’m new to metal working stuff. But there is no way he was manually milling, with that preciseness has to be a cnc right?! Right?!

@liamrafle3506 Год назад

@@DG-ms5dz not at all, I am a manual machinist, the only difference is it can take longer, there are levels of precision you need cnc for but you are gonna be talking sub tenth (.0001") stuff, with time and practice you can make this stuff for sure

@thataintfalco7106 Год назад

This channel is so calming and a great thing to watch when you need something to chill or calm down with

@HalfWolf2 Год назад

How is scout doing a perfect impression of my face when that tape broke smh

@HalfWolf2 Год назад

(Thanks a lot autocorrect, I meant tap-

@rickseiden1 Год назад

I think the most impressive part of this video was the drawing. Doing that by hand, and so painstakingly neat and accurately was amazing to watch.

@ErikS- Год назад

12:45 - "I know it is not gonna be visible, but that doesn't mean it can't look good in hiding" - Nice one! 👍

@MrPureCoffee 10 месяцев назад

This is BEYOND awesome! Wow that is some talent, skill, art, technical all wrapped into a Genius! Whew!

@HeavyIronRestoration Год назад

I suppose now is a bad time to point out there may be a small missed line in the pattern? 😅 Absolutely amazing work as always, Brandon! I just couldn't help myself being a fellow "as good as I can possibly get it" type of person as well!

@InheritanceMachining Год назад

Thanks! There's actually an extra line 🤦‍♂️ 😂

@briansavage932 Год назад

It's insane how much I look forward to your videos. I only wish they were longer! Or there were lots more of them. I could watch this while working at my desk all day.

@InheritanceMachining Год назад

😁 Give it enough time and the old ones will be worth rewatching. Thanks as always, man!

@opieshomeshop Год назад

I had a comment all lined up and ready to go until you said you made that as a gift. In my mind, there is no better gift than something hand made from heart and soul. Those by far are the best gifts ever!!! Great job. 😀💯👍💪🎁💝

@20vK Год назад

Same here and I couldn't have said it any better than you have

@InheritanceMachining Год назад

Making gifts is the best! Especially when you know the recipients will appreciate that fact

@NyksWyldMynd Год назад

When that 256 tap snapped off, I winced so hard!

@evilotis01 Год назад

really enjoying seeing the emergence of your own design aesthetic over the last couple of videos. between this and the bolt-action pen, you really have an eye for some elegant-ass looking pieces of hardware

@InheritanceMachining Год назад

😁 I'm definitely starting to work my way into my own aesthetic. Thanks as always, Tom!

@evilotis01 Год назад

@@InheritanceMachining you're most welcome :)

@MatthewMenze Год назад

I love how that turned out! That royal blue against bronze could pretty easily be achieved with titanium and two steps of anodizing. I'll email you some of the multicolor titanium anodizing I did for some parts at home. Titanium is a pain to machine, but I think the engraving could be done pretty reasonably, based on my own misadventures with Ti in the home shop. Also, I remember in a previous video you had a tapping jig in the background, wouldn't those tiny holes have been the perfect test run for that machine? (or just using the tap in your mills chuck after drilling) I really like that pattern, it gives me some ideas for an aesthetic I am slowly planning around on my motorcycle.

@InheritanceMachining Год назад

I ALMOST tried my hand at titanium on this one! I do have that tapping jig that I used before, and probably should have used here. I was thinking I'd lose the feel and be higher risk of snapping the tap. I was wrong 😂

@MatthewMenze Год назад

@@InheritanceMachining that's been what has held me up from trying my tapping jig out. Gotta love taps for being so useful and stressful at the same time. I love working with titanium, but machining it is definitely...challenging. I find if you can incorporate it into your project without needing many/any machining ops it's pretty fun. On the bright side it reacts to abrasive operations pretty much the same as normal steel (IE, use them if you can). Drilling it is slow and best done with throw-away bits in my experience. But hand forming it under dull red heat feels almost identical to working steel. On balance I feel like it's under appreciated at the hobbyist level. Most of the barriers to working with it come down to being aware of a few constraints it has different from other metals. If you jump into anodizing it, let me know...I've had some fun with that, and with a few tricks and considerations it's pretty easy. You should have a few examples of what I was able to do at home as a first try sitting in your inbox.

@Chiaros Год назад

I love the story to your builds. Dinner at a sweetheart's house, brother's birthday, grandpa's machine shop and teachings. Really adds character.

@Dash41198 Год назад

Nice to see the hammer make an appearance, too!

@Sebastian-ed5kt Год назад

one way of holding the brass in the fixture: superglue just put it in the oven when it's done and you should have a clean and warpage free part

@NickFajardo Год назад

to avoid the oven, you apply painter's/blue tape to the work piece and the holding surface. Then apply the CA glue directly on the tape.

@Thoron_of_Neto Год назад

That's quite a neat wallet! The brass and brushed stainless is a pleasing combination and the finish pattern is beautiful, even with the little swoosh on the corner. That's a wallet I'd happily pay good money for!

@jangrewe 8 месяцев назад

Being more of a CAD & 3D Printing guy, i am absolutely astonished by the precision folks like you are able to achieve *manually*. But what always completely blows me away are your drawings. And the humour and puns are also top notch. Thanks for being awesome! 🤗

@johndaltrocanto Год назад

I love the stark contrast between the wholesome cooking channel music and the grimy reality of machining

@fallenangelrising7831 Год назад

Dude, I was so excited when I saw this project. I made myself a "minimalist" wallet a few months ago and it's so satisfying the way my cards click into place, the weight of it and peoples reactions when they find out that I made it. Would've been clutch to have a machinist help, but my sheet metal donkey skills were enough :D Great work!

@InheritanceMachining Год назад

That's awesome! Someone was telling me once about a wrist watch they machined and casually wore to an interview. Long story short the guy ended up getting a job because of his craftsmanship. Also "sheet metal donkey skills" has me dying 😂

@JodyGates 7 месяцев назад

Breaking that tap caught me off guard and got a legit LOL... well edited.

@Valisk Год назад

Beautiful design and execution! Eat your heart out Ridgewallet!

@ktm3315 Год назад

Love your Voice and your cutting with the chilled music in the background it makes me realy relexed. Thank u for the videos

@remainingrex9471 Год назад

11:00 congratulations, you've carved multiple phallic shapes into your new wallet. Jokes aside, this is extremely aesthetically pleasing

@lukedumoulin6049 Год назад

Watching that tap crack was relatable I did that one one of my first projects in college

@AlwaysBolttheBird 6 месяцев назад

Haven’t seen anyone freehand the technical drawing in a long time. Everyone I see uses CAD. Brings me back to high school when I took Technical Drawing Class so thanks for that

@racingprincipal Год назад

WOW! The craftmanship is beyond impressive

@InheritanceMachining Год назад

Thanks!

@paulodeoliveira3368 10 месяцев назад

Seeing you work on your drawing board brought back memories when I first started studying, shortly afterward I was using CAD..

@naplesnola 9 месяцев назад

I love that "Cockxagon" Pattern. Really pretty, as always your drawings are a joy to watch.

@SalahEddineSTM Год назад

Nice to see you drawing and making the real project, good job

@lindkvistandreas Год назад

i had the same experience.. after sorting and organizing (somewhat) the workshop in a tidely manner, i really urge for this everywhere in the house, at work and in life..

@poldiderbus3330 6 месяцев назад

It's so nice that you show your faults and the side projects, which often seem to build on each other in a fractal manner! For me it seems like you are showing off my reality in the shop.

@marcusFZ6 Год назад

Outstanding work and the finished product is ace. I did swear out loud when you broke the tap as well. You did a good job getting the broken section out without making the hole too big for the same size thread.

@sdfgsdfg3789 Год назад

I really like the handmade drawings. you wouldn't believe what kind of automated drawings i have to deal with at work.

@InheritanceMachining Год назад

Oh I've seen some pretty bad ones haha

@threeriversforge1997 Год назад

As soon as I saw that hand wiggling so very much, I knew a snapped tap was in the offing. Those tiny taps just love to break! If there's one tool you need to add to the shop, it's the Big Gator tap guides. The drill guides are great, too, but those tap guides are a real life-saver! Can't recommend them enough, and they're made in the US!

@bcwrangler Год назад

lol....I bet he makes his own!

@jimlaxdal9023 Год назад

All i can say is WOW thats impressive I’m sure your brother will treasure that forever 👍

@InheritanceMachining Год назад

Thank you! He was flabbergasted!

@MrIlovemetals 6 месяцев назад

I came across this channel 2 days ago(11/24/2023). The only downfall is that you don't have 1000 more videos to watch. But thankfuly, there's still more to go till im caught up to date. Thank you for making this channel and sharing with us your love for machining!

@StarfallSabersForever Год назад

I felt that tap break deep inside my soul. Been there and NOT been able to salvage it. Glad you were able to back it out!

@InheritanceMachining Год назад

😂 That's a mistake nobody wants to make. I got lucky for sure

@matt55346 Год назад

One of the best things here: no CAD, computer or cnc... Just wonderful craftmanship.

@InheritanceMachining Год назад

thank you 🙏

@loaiel-hoshy3532 Год назад

I clicked the subscribe button as soon as I saw that gorgeous drawing. As magical as solidworks is, nothing can surpass the beauty of drawing on paper with a pencil

@gilbert4351 4 месяца назад

👏😂... "Extra delicate when cutting these threads...". Ahh hell... A lot of us may know that feeling I'm sure....

@markstephenson9027 Год назад

This video will blow this channel up

@ShamankingZuty Год назад

I really don't like workshop videos that are narrated, but your voice is so calming and informative while not overshadowing the sounds of the shop which I love so much. Your channel has quickly become a favorite of mine; thank you so much for all your hard work and dedication.

@InheritanceMachining Год назад

It's been my pleasure. Thank you!

@MyDeadMonster Год назад

I enjoy seeing such attention to detail. I’ve never seen anyone with such drive for this, it’s awesome.

@bcwrangler Год назад

This channel is like Clickspring....Awesome!

@Weasel8904 9 месяцев назад

Literal art Brandon, well done 👏

@dannyl2598 Год назад

WOW! That is amazing. I pick certain people to aspire to for a quality that they possess. You are my aspire to in regards to attention to detail. Thanks.

@InheritanceMachining Год назад

Thank you so much!

@slonismo Год назад

I love your videos and I love that you have closed captions

@N.Cognito Год назад

There is something soothing and calming about watching your videos. I'm super happy I found this channel.

@rpower1401 Год назад

Very nice piece. As soon as I saw that tiny tap I knew what was coming lol Nice save.

@InheritanceMachining Год назад

😂 Thanks!

@kefler187 Год назад

One of the finest RU-vid machining channels in existence in my opinion. While I love hobbyist machinist channels, this and a certain pantsless crowd watching channel I won't name ;), are the pinnical of RU-vid machinist channels. Edit: Make that 3, there is another one run by an Asian guy that's absolutely fantastic as well :)

@InheritanceMachining Год назад

Thank you 🙏

@adzbeatz9618 Год назад

You nailed it!!!!.....It's pure passion for keeping up with old school machining methods

@clydebalcom3679 Год назад

I don't know what to call the pattern either. Technopunk? All I know is that I like it.

@InheritanceMachining Год назад

I like that

@jonturn7 Год назад

Wow! Everything is stunning, but that pattern is awesome! Amazing work.

@InheritanceMachining Год назад

Thanks!

@destinykid10_evo15 Год назад

Dude just made a ridge wallet from scratch I’m impressed (that would’ve made a hilarious sponsor for this video)

@casiothestrong Год назад

I love you using of the old school drafting table. Everyone just uses cad now. This is so refreshing. 😊

@greg2337 8 месяцев назад

2 hours for engraving?! You're making me love my Okuma more and more. That wouldve been 2 mins for a CNC machine. You have the patience of a saint

@AatroxSuppMain Год назад

The part of me that loves templates/blueprints is ready to die happy seeing those pencil plans

@aserta Год назад

Mighty bite clamps would've been perfect for this op. As is, "chef's kiss" outcome.

@TheShaggyRifleman 5 месяцев назад

I personally wouldve put Jake's initials on the spine of the clip / wallet and continued the pattern in the brass onto the clip and made the look seamless. Aside from that, this is top notch. 😊

@aimDiego Год назад

Keep it blue? Fantastic! You could heat paint it! I know it would look so cool

@owievisie Год назад

It's amazing what some people can do with conventional machines, love the 180 degree radius

@jerrysanchez5453 Год назад

This might just be the coolest wallet on youtube.that precision though

@InheritanceMachining Год назад

😁

@LerrySanders Год назад

RU-vid ads have broke me because I thought this was an ad for ridge wallet and I was going to rage quit the video. The wallet turned out amazing and I cant believe you did it all by hand. crazy good.

@InheritanceMachining Год назад

haha I had honestly never heard of Ridge wallet before making this. Now it's all my ads show! 😂 Thanks

@spykedenterprises Год назад

Watching old school engineering drawings on a drafting table is just too cool.

@ninjaStalker069 Год назад

I have say, the milling of the brass with the blue marking fluid was mesmerizing.

@mysterjd34 Год назад

This channel is about to blow up

@nagynorbert26 Год назад

I have never seen someone do something like this manually, instead of a cnc which is definitely simpler and way faster.

@forgeperformanceand4x4 Год назад

I would absolutely love to see that in a few years with some patina on it.

@nickbell3546 Год назад

The amount of time it takes you to manually calculate each dimension and dealing with fixturing/jigs makes me REALLY appreciate CNC machines. Great work!!

@InheritanceMachining Год назад

You and me both 😂 Thanks man!

@grahambird1570 2 месяца назад

Loved every second of this !

@unclewes8850 Год назад

i actually gasped when that tap broke.

@aguycalledlucas Год назад

Yeah, me too

@shawnmrfixitlee6478 Год назад

wonderful work , more entertaining than Adam booth .. your all manual no CNC.. brotherly love great gift .. ENJOYED

@savagepatty Год назад

I’d be thrilled to get something like that, so I’m sure your brother will love it

@SheldonMorris08 Год назад

Can across your channel a few days ago, you are very skilled and I truly appreciate your attention to every detail, your videos have been a good to watch.

@InheritanceMachining Год назад

Much appreciated!

@youssif9 Год назад

Inheritance Machining your channel is awesome. Great content and i always learn something! Dont change anything! Also thank you! nice to take a break and chill.

@InheritanceMachining Год назад

Thank you so much and my pleasure!

@elluisito000 Год назад

It's amazing that you werr able to carve that pattern without a cnc. Well done and as usual thanks for sharing 👍

@InheritanceMachining Год назад

Thanks Luis!

@ymworkshop6111 Год назад

Good job! I prefer, I'll put blue in the grooves.

@penpal222 Год назад

Absolutely in love with your channel, please 🙏 never stop!

@InheritanceMachining Год назад

No end in sight! 😁

@bdude92 Год назад

You are soon to become one of the youtube machinist greats amongst the likes of ToT

@caffebun Год назад

Only took a couple classes of conventional mill and lathe and went straight to CNC, but I know how hard it is to do what you did. Amazing skills ♥️

@TheKingMJackson Год назад

Easily the best DIY channel on RU-vid

@manishkumawat3939 Год назад

i only subscribe because he design by hand, loves old school work.

@BadYossa Год назад

Immediately thought of James Webb telescope when I saw the thumbnail! Really enjoying your RU-vid journey mate 👍

@InheritanceMachining Год назад

Now I see it too haha thanks!

@j.behrens7332 Год назад

Since I watched the first video on your channel I'm absolutely amazed about the efford, precision and passion you put into your work.

@InheritanceMachining Год назад

Thank you 🙏

@JM-yp8du Год назад

This is why I love this channel. You show us your mistakes, which shows us you're human, and then reaffirm your skill by doing something incredible, like hand-machining a design into brass! Most other channels I know would resort to a CNC, but the care and attention demonstrated by calculating and cutting everything by hand makes this project truly special.

@InheritanceMachining Год назад

I appreciate that a lot. Thank you!

@joshuatilley1887 Год назад

This looks very much like the James Webb space telescope!

@wayne6737 Год назад

Gerday mate. I'm not a mechanistin the slightest, unless you count a battery powered drill. That's me, but I was watching Adam Savage doing some lathe and milling work. Even he himself told us that he was a learner on these as he was a model maker who played with heavy machines during Mythbusters. I got to thinking what a true expert could do. In searching I came across the vid where you mounted a gague on your lathe as your scale for the cutting table (sorry not knowing proper names) in thousandths and was impressed so here I am now having found a really amasing channel for information. I'll never get to use that info as im now 70 and disabled but to watch, well its so much better than some Thi woman duilding cubbyhouses in the forest or instantly digging a swimming pool in an afternoon. Looking forward to watching you doing what I thought impossible. Thankyou for your time and information as well as education. I will at least be able to help my sons with things needed. Friendship & the freedom to enjoy it. Peace out. Wayne PS:-Bourn in 53 so was part of the "Peace love dove, heavy freeky far out and power to the people. Yep, Hippie. Worked for local TV station QTQ9 Brisbane so when I tried to join army, was rejected as I worked in a protected industry. Became a long haired hippie for the women, wow what a memory that one. Bye again

@valny2369 7 месяцев назад

this one was a pleasure to watch

@Zardwark Год назад

Brandon should sell the original drawings for his projects, they are works of art.

@christurnbull8099 Год назад

Thank you for allowing us to live vicariously through your shop. I have utterly no need for a mill or lathe, but by golly these videos make me want one

@InheritanceMachining Год назад

Nobody every really has a "need" for a mill or lathe. But its fun to come up with reasons for having them 😁 Thanks!