Making a NEW Cylinder Barrel for CAT D10 Dozer | Part 1 | Machining & Welding

Подписаться 782 тыс.

Просмотров 536 тыс.

50% 1

This cylinder barrel has seen better days, it’s cracked and worn out, we need to make a new one! This is from the blade lift hydraulic cylinder off a Caterpillar D10 Dozer. The trunnion mounts are worn out and need to be reclaimed, we also found cracks around the trunnion that go all the way into the barrel plus the barrel end has had a failure and been incorrectly repaired. In this part 1 video we show the process of disassembling the barrel in the lathe by machining out the welds that hold the barrel end, trunnion and head flange to the barrel. We then attempt to remove the ends by heating to expand and shrinking the barrel with cold water. We also machine up the new stand offs and reclaim the trunnion mounts by welding and machining to suit the bearings. We also give the head flange and trunnion a sand blast so all our parts are ready to go on the new barrel. Stay tuned for Part 2!
In this video we are using:
- Hafco TM-26120G Centre Lathe
- Hafco TM-1740G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
To see more follow us on online here:
TikTok: vt.tiktok.com/ZSdHhtN4h/
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
#australianmachinist #machineshop #machinist

Наука

Опубликовано:

9 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@CuttingEdgeEngineering Год назад

Nothing like a simple reclaim job turning into a full barrel rebuild 😂 not to worry, we'll get it done and can't wait to show you what the honing machine can do in Part 2! 😎👍 Grab a F*CK OFF TRAIN mug here: tinyurl.com/f-ck-off-train Official CEE Merch shop: www.ceeshop.com.au Follow us online here 👇🤳 linktr.ee/CEEAUS

@Mr.Avuncular Год назад

My favorite late Thursday early a.m. video now I can check this out and kick back and watch Curtis work 😁

@denyadroid2713 Год назад

the whole video was hiding his fingers... be careful!!!

@CuzznRickH14 Год назад

You make it look so easy. Thanks for sharing. Hello from Malta, Texas.

@Murphyslawfarm Год назад

Lmfao a simple job for Kurtis

@Bristoll170 Год назад

Thanks as always team for another GREAT Friday night beer accompaniment 👍. Cool to see George is still alive and kicking....Flying 🤔... with Homey of course as well. Karen, you could be a movie director with these brilliant creations you put together for us on the outside world to watch. Take care guys. Cheers Pete' N.Zealand 👍

@RWJP Год назад

Ooh that little manoeuvre with the fork lift to tip the scrap barrel onto the end of the fork was just superb!

@hughobrien4139 Год назад

That move all by itself just won the whole damned internet for me today! This young man is one heck of a craftsman!

@leebrooke1831 Год назад

Looking to see if anyone caught that, Kurtis’s expertise in the machine shop extends to everything. Just so cool to watch a true jack of all trades who is the master!

@richardmeyer418 Год назад

I'm watching this late, and raced into the comments to mention it. Seems like his other fans are impressed by the same things I am ... 😉

@kennethgilbertdds7249 Год назад

19:00

@reckless8404 Год назад

Exactly! 😂

@MajesticDemonLord Год назад

I've been to the Gym, I've had friday night takeaways, now it's time for just under an hour of pure machining Zen.

@CuttingEdgeEngineering Год назад

That's how it's done! Nice one mate 👍

@ai-d2121 Год назад

On the other side of the globe it is exactly the same in reverse, video, breakfast and to the gym. Perfect morning. Except for the gym. But at my age ( 58 today) one need to stay in shape.

@markthompson9914 Год назад

@@ai-d2121 same here only I was well Tom dick 🤮 yesterday so today it’s just a chill day and a CEE video 😁✌️🇬🇧

@alvarogeorgenobregeorge69 Год назад

Hi everyone, Greetings from Brazil .

@tomahoks Год назад

I've been to sick bed. Not Covid-5000. Hurts everywhere.

@BaronVonBeef Год назад

Just thought I'd mention how much I appreciate the explanations you give, as someone who isn't a machinist and has never operated these kinds of machinery it's very helpful 👍

@ValiRossi Год назад

In this supply chain constrained world, you are rockin it.

@Uli_Krosse Год назад

I hope that customer was overjoyed when he could simply swap his broken cylinder for your refurbished one and be ready to go just like that. Again, great damage analysis. Grinding off the paint to find that crack underneath is diagnostics taken to the next level. Very impressive, even if it is just another day in the workshop for you. As usual, a great weekend to everyone here! Including you, of course.

@CuttingEdgeEngineering Год назад

Hey mate was definitely a bonus for our customer we're hoping to expand our fleet of exchange parts over the next 12 months.

@Uli_Krosse Год назад

@@CuttingEdgeEngineering That sounds like one of your typical ideas. Practical, useful - but not exactly cheap ... 😁

@Molb0rg Год назад

@@Uli_Krosse he has the space, he has the means, he has clients - I think it is an excellent idea, and it like investing in gold, so it not like money are lost, I guess it better than bank account.

@Uli_Krosse Год назад

@@Molb0rg Of course it's a good idea. They know what they're doing, that much is very obvious. I just wanted to pull his leg a little, that's all.

@SeanBZA Год назад

@@CuttingEdgeEngineering Time to grab the parts off of the scrap pile then and rebuild. you should know what moves, and what is common to get beat the hell out of as well.

@ferolcat2009 Год назад

This job not only shows the skills of excellence that Kurtis has but also his business brain. When customers can get a replacement part on the spot and don't have to wait for a repair it leaves a great impression because no one likes down time which equates to lost revenue. Building up a stockpile of ready to go exchange parts will increase business potential due to increasing CEE reputation as not only a reliable and first class repair shop but also able to offer many replacement parts emmediately.

@billtheunjust Год назад

I love when you have a part in your stock to give the customer a quick turn-around. Excellent customer service!

@aaronpreston47 Год назад

I got worried that you sandblasted your freshly machined surfaces, the tape blended right in. Reminds me never to doubt you Kurtis. Now you three have a great weekend!

@nathanmiller5209 Год назад

3 mins in and already im impressed Kurt, your description and of the spec and damages show you know your product, also having a replacement fleet for exchange shows you are a organised company making it easier on yourself and your customer,the question is how does only one man and woman do it all lol ?

@CuttingEdgeEngineering Год назад

We work very hard 😅 but also very efficient as it is just the 2 of us handling everything, Kurtis gets all the jobs sorted and I get all the business stuff sorted. We love it

@dickensider6049 Год назад

Got Friday off here in Green Bay, WI (due to it being Veterans Day) so decided to stay up and wait for the latest video. As always, great video. Keep up the awesome work! Happy Veterans Day to the brave men and women of our military!

@CuttingEdgeEngineering Год назад

Hey mate we call it Remembrance Day here, respect to all those who have served and fallen! Thanks for taking time to watch the vid 👍

@iancraig1951 Год назад

Yeah lest we forget

@aerialrescuesolutions3277 Год назад

@@CuttingEdgeEngineering Remenbrabce day, that is a great title for this day.

@dickensider6049 Год назад

@Cutting Edge Engineering Australia…I actually do know what Remembrance Day is as I born and grew up in the Cayman Islands…a British Overseas Territory. It’s been 20 years since I lived in Cayman so didn’t remember the exact date. Thanks for the reminder…make sure to wear your Poppy in acknowledgment and honor of the brave men and women of the commonwealth . P.S. Heading to Cayman next Friday after not being able to visit for almost 3 years due to you know what. My youngest 3-year old daughter will finally get to meet her paternal relatives. So excited to be heading home to see my family and friends!

@jbonegw Год назад

It absolutely blows my mind how throughly you know all these equipment’s, their components, the functionality and tolerances. Not only that but how to use all the machines in your shop. 🤯

@alexanderSydneyOz Год назад

Honestly, it is worth watching these videos just for the pleasure of listening to someone who is 100% confident about every single, tiny, intricacy of every job. It's quite a rare sound; not unlike enjoying music, oddly. I can well imagine the customers feel similarly

@michiel1362 Год назад

Kurtis will be gathering lots of new clients this way by showing his workmanship up close

@dirtfarmer7472 Год назад

I wonder how much studying he does that we don’t see

@dirtfarmer7472 Год назад

I’m a skeptic always have been, don’t pay any attention to my skepticism

@629Justme Год назад

Yeah. Eventually we will have to ask him how many talents - welding especially - that he is proficient in. We now have to add forklift skills competitions to his list.

@Loopy_Boat_Skipper Год назад

I love how you can reclaim worn out parts rather than tossing them in the bin like most places seem to do.. great job

@aserta Год назад

Oh... plenty of shops reclaim them, what you see tossed out is the garbage results of that. You can reclaim them only so many times when your work is subpar, so when someone who actually knows what they're doing looks and finds the signs of "yeah, that's cooked" they'll toss it out. I took my dozer in for a few repairs and got some scrap tubes for less than scrap for that reason, as explained. You either do it right, like CEE does, or you'll cost your customer in a few months.

@teamtrembleoutdoors4870 Год назад

I hope your customers know how lucky they are to have someone with your knowledge and skills at their fingertips.

@hot_wheelz Год назад

Friday afternoon is here again and my CEE fix has arrived just in time. Thanks Kurtis and Karen, hope you both have a great weekend.

@BigJamesinDC Год назад

The amazing work, the vastness of the shop, the pup, the woman, even wild birds are flocking, and in one flex we now know why - this man is clearly forklift certified

@Servant_of_Christ Год назад

You are a wizard with that forklift! Blessings from Sweden 🇸🇪

@w.o.o.d.y Год назад

Another genius metal working operation by Kurtis, brilliant as always. Picking up the old pipe with the forks was the coolest thing you've ever done on camera Kurtis !!!!!!!!

@emiliosolis5056 Год назад

Did you see him pick up a coin with the forks?

@629Justme Год назад

Yeah. Eventually we will have to ask him how many talents - welding especially - that he is proficient in. We now have to add forklift skills competitions to his list.

@robertlafnear7034 Год назад

I'm a welder not a machinist and with that I'm always amazed at how the lathe cuts through those tough welds like butter and the inserts just do what they are doing without breaking ....... 🤔 Love your shop ! Thanks for posting these. 😁

@OriginalMomo Год назад

This is exactly why a good visual inspection is necessary before you start. Good catch, Kurtis!

@kempy666999 Год назад

Thanks for yet another fantastic video - a perfect start to Friday 👍 As always, great camera work, editing and machining. What was impressive though was the forklift action tipping over and picking up the barrel on the fork (and not dropping the head flange in the scrap bin! 😃 👍). Looking forward to seeing the new honing machine in action next week. All the best from the UK, Paul

@CuttingEdgeEngineering Год назад

Hey mate glad you liked that forklift skill, was trying to impress Karen and it worked 🤣👍

@kennethwhite7829 Год назад

Yes both of them do awesome job's.. every body needs to throw Mrs Kurt some love with out her there would probably not be a video...

@bryanoftexas Год назад

The failure mode talks are always the best, so interesting hearing how stuff failed or why you shouldn't repair things a certain way because it'll lead to x, y, or z issues. Great video

@CuttingEdgeEngineering Год назад

Thanks for watching and the feedback glad you enjoy it!

@ibTeeMac Год назад

Love your in-depth descriptions of the parts to be worked on. Really adds to the overall watch. Cheers from Vancouver Island.

@athendemosh8001 Год назад

Beautiful part of the world

@dustinpendergast Год назад

Watching from Victoria!

@ibTeeMac Год назад

@@dustinpendergast What beautiful weather we are having eh. Cheers with a FatTug IPA. One of my favs.

@dustinpendergast Год назад

@@ibTeeMac love me a Fat Tug! Beautiful weather we are having!

@t.a.7970 Год назад

Must be Friday again. This is the best show on internet tv.

@CuttingEdgeEngineering Год назад

Cheers mate glad you enjoy it!

@mikeweagle5523 Год назад

Good morning CEE, Kurtis your skill at finding Flaws in a piece and explaining the cause is amazing. I know you would likely hate it, but you would be a great teacher. I know your channel is already followed by many people hoping to get into machining/welding/ engineering. Thanks to Karen's skill in editing everything is easy to follow and very entertaining. Thank you both for taking us along Have a great weekend.

@ronniewilliz153 Год назад

They are a great team.

@deckum23 Год назад

Picking up the barrel with the forklift like that was pretty damn impressive.

@cyberherbalist Год назад

Wow, that was pretty darned clever getting that trunnion off!

@mdouglaswray Год назад

Always good to see things being reclaimed. That trunnion looked rough at first, then brand new! Also, though I love the outtakes, I'd love to see a full-length real-time job with all the cursing left in. LOL.

@DonDegidio Год назад

Hi Kurtis and Karen, Appears Homey was looking for a new toy to destroy. 🙂 Can't wait for Part 2 to see the new Sunnen honing machine in action. You both stay safe.

@nicollamzon9892 Год назад

Forklift skills are top-notch. Great video as always!

@UncleManuel Год назад

Just another example of Kurtis pivoting his skills so that the situation didn't barrel out of control. ... And that was the pun for the day. You're welcome! 😁😇🤟

@onebridge7231 Год назад

Great 1am, can’t sleep and Curtis comes through! 🤗

@CuttingEdgeEngineering Год назад

This might put you to sleep mate hah

@onebridge7231 Год назад

@@CuttingEdgeEngineering As a another famous Aussie YT creator says, “Uhm Yah Nah!” aka Destination F*cked. I’m a subscriber from Minneapolis, Minnesota, USA and your content gives me a great look into my dad’s work life before he retired. He was a Master Tool & Die Maker. I unfortunately went into finance. 😖 Really enjoy your content mate and read the comment from another video where the Student and his class is learning a lot from your shop. 👏👏👏

@ziggyman77 Год назад

How close you get to gigantic moving/spinning parts with your tooling gives me the heebie jeebies. I know it's fine, your work holding isn't gonna move. But for some reason the danger light goes off in my brain. Great video as always.

@CuttingEdgeEngineering Год назад

Definitely don't want to get complacent and i'm always respecting what this sort of machinery can do, it won't give you a 2nd chance that's for sure.

@randytravis3998 Год назад

would it be swarf or would it just be a smear ..I have a little lathe and my fingers stay back .. heard stories about hoodie strings and machines ..

@MoMonde Год назад

I know you have a hate/ hate relationship ship with trains, the industry I worked in for 34 years. It’s the same ratio there, you get one opportunity for safety, choose wisely!

@josephvella3688 Год назад

I have been a long time subscriber. You are absolutely amazing at what you do. Seeing how you work and do things I would feel more comfortable using a part from you that has been reman'd opposed to OEM. You are a master at your craft. Camera woman does a phenomenal job and editing is spot on! Keep killing it!

@buzzroadguy Год назад

Seen you do a lot of cool stuff but I love the fork in the barrel lifting trick. Nice driving.

@chriskirkemo2522 Год назад

Excellent work sir! I really enjoy the deep dive on explanation of what the parts are used for (with visuals) and the in depth failure analyses you undergo, and of course…the technical execution. You’re first class, man. Enjoy the day.

@mrushizha Год назад

At last, the new Sunnen honing machine is gonna make its debut! Can't wait for part 2.

@johndehoog5567 Год назад

i am always impressed when parts are salvaged and remanufactured. That approach is so counter culture to the current attitude of build it cheap and just throw it away when it breaks. The best part is the customer wins, the machine shop wins and the environments wins. But the best best part is that the whole process is so meticulously done and recorded!

@jackreed3445 Год назад

Great video yet again. I was holding my breath when you were cutting the trunnion weld loose and getting close to the tube bore. I have seen metal fail when it gets close like that. George is still supervising from above and I hope he doesn't leave any droppings on the machinery. Have a wonderful weekend all! jack

@robertklein9190 Год назад

It's Good Luck when he leaves a deposit.

@thebear5454 Год назад

It's amazing to see how much hidden damage you can find when you know what to look for. Field engineers need to look closer to prevent serious danger. Nice rebuild Kurtis.

@an04ker Год назад

Explain what they need to look for?

@blindbob4115 Год назад

It’s good for the environment to reuse old parts where you can, great skills Kurtis as usual

@MattysWorkshop Год назад

Gday Kurtis and Karen, for what these cylinders done they hold up extremely well, I’d hate to think what an OEM replacement would cost, definitely need to be sitting down to get that quote, I’m keen to see the new honing machine do it’s thing, awesome video as always mate, have a great weekend, cheers

@randytravis3998 Год назад

got some parts for the wife's trail Blazer I swear the price on parts have doubled in the last year .. I priced a plasma table threw a company they wanted as much for it as I paid for my 1st house over 20 years ago .. and it was only a 4 feet by 8 feet table .. home use ..

@MattysWorkshop Год назад

@@randytravis3998 I know what you mean about the cost of things going up, I got the latest catalog from Hare and Forbes today and my lathe has going up by almost 2k…

@CuttingEdgeEngineering Год назад

You're not wrong, need to be sitting down when you get any OEM prices 😂 We're looking forward to showing what the new hone can do it's definitely a fancy bit of kit after all the years using the old vertical hone.

@hannahranga Год назад

It's that special yellow paint, it's very expensive. That said some things are very reasonable. Their batteries are good value if the size suits your 4x4. Irc coolant isn't bad either. Then again I've got a painful relationship with the LR parts department.

@paulvolz720 Год назад

More Aussie machining. Always a pleasure to watch!

@nicomeier8098 Год назад

Always impressed with the thouroughness of your work.

@thabangsephuma4046 Год назад

I like how the sound matches what's on screen even when the action is sped up a bit.

@DrDungaz Год назад

I do not know why your post attract my attention but safe to say it makes my day more enjoyable. You three plus the birdlife epitomises the great Aussie family. keep the good work going. P.S I did some driving in Tom Price during some upgrades to Marandoo mine and Tom Price mine. great to see big equipment repairs. Cheer Arthur.

@CuttingEdgeEngineering Год назад

Hey mate thanks for watching glad you are enjoying the videos 👍

@JonDingle Год назад

A lot of work in this type of job and as usual, the high standard of skills is clear to see. Another epic video by CEE!

@twodeepupyours508 Год назад

Your quality of work is always so impressive

@kkloikok 7 месяцев назад

Forklift operators amaze me with their dexterity with a giant machine

@SpocksBro Год назад

What makes this wholesome is to see his lady getting to contribute to what seems to be the family business by taking over the RU-vid video production which I'm sure must be generating good money by now considering the high view count. I could be wrong but her editing seems to be inspired by Casey Neistat's videos. Either way, great job and also pets and birds!

@alanfenwick9307 Год назад

Great "two-for" when you were removing the trunnion mount! Thank you K, K and H, excellent work as always and very therapeutic after a very less than ordinary day.👍

@froggyhopper1 Год назад

Another 36 minutes well spent relaxing . Thanks Mate.

@CuttingEdgeEngineering Год назад

Thanks for watching 👍

@radketim Год назад

Nice to see a milwaukee tool addiction isn’t just an American thing

@schlaznger8049 Год назад

I know you guys are busy but you need to take a trip to the beach with Homey. Please take us along. From Texas

@lbm1970 Год назад

Hi, I don't miss a single video of you! I can't wait to see new videos! About this video above, I was looking forward to seeing the sandblast, but you guys cut it out! It's very pleasant to see sandblasting at work, I really like watching restoration videos and sandblasting is a "therapy", lol. Next time, don't cut this part, please! A big hug from your fan here in Brazil.

@andrewwilliams3394 Год назад

Kurtis, i can tell you are a master craftsman by the way you don't over tighten nuts ,bolts, capscrews chucks etc, i have seen other repair shop videos where the machnist/mechanic reef on nuts etc with a wrench and a length of pipe, if nuts were meant to be done up that tight wrenches would be 3 feet long those guys are absolute cowboys. Keep up the good work, regards from a Limey machinist now living in British Columbia Canada.

@bigvideoenergy Год назад

I like how he's actually smart af and knows what the part is. So many blokes don't even know what it's used for but try and weld it.

@mikeboring1293 Год назад

Man when I watch you do your thing I’m in amazement, you got a gift for machining. Love the out takes, so funny FU train 😂

@georgedragicevic5618 Год назад

Impressive detective work involved in diagnosing exactly what caused the failure

@hughobrien4139 Год назад

Hold the phone! I had to stop the video after seeing that material handling job on the reunion removal. Didn’t know material handling could have that level of craftsmanship. Damn fine job! Moving from west Texas to central Oklahoma some 25 years ago I heard a term spoken often and haven’t seen very many moves made that fit the term. Now I have! This one wins the internet today for me! “That was neater than a skeeter’s peter!” Now I’ll go back to watching the rest of the work. I won’t be forgetting that one!

@colinwood2687 Год назад

It always find it amazing how these inserts handle the hard welds without breaking. Any way brilliant job on the dozer ram👍🇬🇷

@Paddington60 Год назад

Great stuff Kurtis, looking forward to seeing the new honing machine at work. Good job on the shot blasting Giggler! Thanks Kurtis, Giggler, and Homey

@estudiom142 Год назад

ONE Bannananan in diameter !! Personal signature!!

@notapplicable2515 Год назад

"Oh, the bottom fell off" is classic!

@berrieds Год назад

Brilliant stuff as usual. Love you guys 💗 P.S. Can't wait to see the new Sunnen machine in action!!!

@Arachnikadia Год назад

Another educational video. I love watching you work. And the bloopers are hysterical 😂😂

@SouthShallowBay Год назад

This is one of the few channels that I go-ahead and prelike the videos before I watch them cause I already know I'm going to. 🤘

@CuttingEdgeEngineering Год назад

Wow, thank you!

@stevecadman137 Год назад

Oh you f#$^ng smartarse with the pick up the detached barrel with the fork! Class mate!

@THEREALISTICWELDER Год назад

Thanks guys. Your videos are the best part of my Friday morning.

@Aleks_Mechanics Год назад

Notification Squad Have a nice weekend!🔥🔥🔥

@CuttingEdgeEngineering Год назад

Right on time!

@paulsomero Год назад

watching you tip that barrel onto the fork and then slip it into the bin was so satisfying.

@gregwaters944 Год назад

I am impressed to see the depth of inspection you do before each job, shows the workmanship that you do before each job goes out the door.

@stianaslaksen5799 Год назад

You are such a wealth of knowledge. Really enjoying to watch.

@CanandianPeriod Год назад

Enjoy all your video's Kurtis. Never seen a lift cylinder this big rebuilt. Looking forward to seeing the new Sunnen Hone in action !!

@mjm7187 Год назад

Always informative and entertaining you two. Outstanding video editing Karen. CEE is the best start for Fridays. A small crochet hook works great for pulling out swarf in tapped holes.

@htownblue11 Год назад

“Karl’s” out takes at the end are always comedy gold. Keep up the good work Curtis.

@destrygriffith3972 22 дня назад

Kurtis's slick forklift work makes me miss running machines…

@davidrobinson7667 Год назад

Precision machine work and awesome video editing, you both make and Awesome team ! Kudos from Western Pennsylvania 🙂🇺🇸

@beb32225 Год назад

Educational and entertaining as usual....Thanks for letting us in the shop!

@LaxianKey1 Год назад

There is just something satisfying about listening and watching a circular insert doing its work. :)

@davidyates748 Год назад

Impressive forklift driving skillz @19.00 ! Lovely work as usual guys!

@Michmanjuga Год назад

Hi, guys! Can't wait for part two. I love your videos. Keep going! P.S. The safety officer is so sad. Buy him a new toy. And I also a little bit jealous you're having a spring time in Australia.

@keithspencersr.6806 Год назад

Curtis, you make me wish I started my career with mechanical drafting and machining instead of doing military service. I’m a retired instructor and student of architecture but my love is machining.

@toolbox-gua Год назад

My kind of lesson. Plan to reclaim anything worthwhile, pinpoint damages and causes, superb work, video work on par, Homeless seemed a little confused or looking for yet another toy, all under the bird's eye lookout. Thank you for sharing and teaching, looking forward to part-2. Take care.

@roberthocking9138 Год назад

Love the outtakes, makes you realise how hard it is to do a piece to camera. Good fun

@TheLastTater Год назад

Great work guys! Can’t wait to see the new machine in action!

@ICA17887 Год назад

Another great video from the CEEA. You have to be a professional to machine this kind of cylinder because without knowledge there is always the danger of seeing the part fly over you, but with you and your experience you will know what to do and what not to do. Can't wait for the Kurtis suite.

@sanjaysami4315 Год назад

I think the most impressive of Cutis’ skills is the way he handles the forklift.

@dannydoyle3687 9 месяцев назад

It’s amazing how you use all your tools and you are very talented and I love watching you. Please make more videos.😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@Thorbrook Год назад

Absolutely love your channel. Thanks for bringing us along for the ride

@deefdragon Год назад

I love how you still convert to bannanas.

@CuttingEdgeEngineering Год назад

it's been a while was time we helped make things more accurate for the Merican viewers 😂👍

@mixpick138 Месяц назад

I hope you have a whole cadre of apprentices that work with you so you can pass on your knowledge and work ethic to future gens. Great stuff!!

@jamesbreault5762 Год назад

The only machine shop that has a wild bird for a pet ,gotta love that.

@johnbillington488 Год назад

Great video. Brilliant customer service with an immediate fix. Idle machinery costs money. Cheers Billo

@Ninoy2059 Год назад

Job well done mate. Passion, Knowledge and determination. That what makes you a good engineer. I admire your work ethics.

@robertsteinbeiss8478 Год назад

What a high level show off :D with the fork lift.

@Weldpro2011 Год назад

The 🍌 analogy is by far my favorite part of this channel and I wish Kurtis would use it more often! 🤣

@Redman147 Год назад

Very amazing how long these parts could last over time. 25+ years is a long time for that kind of wear and tear.

@mauricelevy9027 Год назад

Well done for making the video so interesting . At last ,We're going to see that new Sunnen Honing gear at work too .Please get Part 2 done asap Kurtis ?