Making a Self Clamping Circular Saw Guide - Kendinden Yapışkanlı Kesim Kılavuzu 

Great work. Plus here's a couple of tips from a (now old and) very experienced wood worker. 1. Add a 90 degree cross piece underneath and at the beginning of your track board. Always quicker. 2. Leave your track board sticking out the other side of your fence for clamping (hand spring clamps are enough) as well as a 45 degree guide (cutting with saw at 45 degrees). 3. Trim the abrasive paper a little further, even micro granules will dull your blade. I've added these refinements after decades of using this kind of system. Also, an 8 foot version for large panel board can be helpful too. I've usually kept both in the workshop.

For goodness sake, use a push stick when using that circular saw! It takes a small lapse of concentration or a moments slip to lose fingers/thumb (@27secs). I have been working in wood for well over sixty years and the most precious and valuable item in the workshop is yourself. Keep safe and thank you for posting.

The simplest design I've seen yet works great, great idea to use a sandpaper backing to provide grip, well done.

Очень понравился столик 4 в 1ом. Из всех просмотренных на ютуб самый простой и доступный в изготовлении.

You left me speechless man! That is a super effective tool with no effort and you made it in less than 1:30 minute !! If you will come to Italy I'll offer you a coffee

i just built one. Never so easy for me to using a circular saw. Before I was scared to use it and afraid to cut my finger and never can made it straight cut. Now I did. Thank u so much for this design easy and simple. As female, I love it.

This guy is the Einstein of DIY.

I have seen lots of DIY saw guides but this is simplest and easiest of them.

That’s pretty darn clever! I think I would still use just a spring pinch clamp on the ends to keep it from moving though. To be safe.

The simplicity is genius 😂👍🏽

Me abriste la mente... ahora si me dan ganas de aprender a trabajar la madera luego de ver tus vídeos. Sos un genio

Превосходно! Быстро! И конструктивно!

Best and simplest one I’ve seen so far. Thanks

I got a piece of wood flooring with the rubber backing on it, been saving for I don't know what. Will see if it works tomorrow. Nice idea, thanks for your time.

I would use the rubber mesh that you can buy at Home Depot and other places. It's more secure and will not cause any damage. And it comes in various colors.

The sandpaper on the bottom is an awesome idea.

What a brilliant and simple idea. Thank you.

It's amazing how stupidly simple ideas there are to make work easier. :-))

Brilliant! As Muadibe mentioned, "Simple is always the most practical". I'm going to make one this weekend. Thank you for sharing this idea!

Great idea and I made mine today. Instead of sandpaper, I put small drops of clear silicone on the bottom and it works great. I also bring two spring clamps with me. I plan to keep it in my truck to use to break down plywood I buy at Lowes in the parking lot. Cool idea.

That's a very interesting idea with the sandpaper; I'll have to try it. I have used a variation of this for 40 years. I use 1/4" fir plywood for the base (no need to go thicker), and a narrow strip of the same 1/4" ply for the guide. I never clamp the guide; because the good side of the wood is face down for a clean cut, I use two 3/4" nails to secure the guide, which when done I loosen, leaving the small nails in the guide for next time. Works very well.

I like you because you do simple tools to help us. Thanks a lot for share with us.🙏🙏🙏🙏🙏

Very good idea for a framer, quick, simple cheap and don't have to mess around with a chalk line.

The most simple. The best Idea!!!!!!

De los mejores de youtube. Simples, sencillos, pero muy funcionales sus creaciones.

This is really good for rough work. Not so much for finish or fine work. I really like this device. I'll make a couple of them with different grits.

Simple and easy are the best! Thank your for sharing.

Ah, nothing like the ol K.I.S.S. principles without all the "bells and whistles" (and B.S.)! Nice job!

Amazing simplicity in this!!! Love watching you work!!

That is so simple yet so useful and something a person with my skill level can make.. Thanks for the great idea

The BEST ideas are usually the SIMPLE ones - WELL DONE! Subscribed. Sadece güzel açık bir huş ağacı kullanmakla kalmayacak, aynı zamanda kontrplağın su geçirmez bir yapıştırıcıya sahip olmasını sağlayacağım, çünkü bazı yerler çok nemli bir havadır.

That is quite simply genius! Simple but brilliant. Thanks for sharing the tip.

Haha, finally I find it fast and easy to make it, GREAT

Call me paranoid, but I would still clamp it. Especially on more expensive wood. Love the idea and I can use it for other things. Thanks

Clever, thank you.

Simple is always the most practical.

Just nice. I have Never thought about Sand Papier 👍👍👍👍😉

No entiendo el idioma pero el video, es muy claro, y la guía facil, de hacer. Muy práctico. Felicitaciones a su autor ! Saludos desde Colombia

Skateboard grip tape would be easier to get. Basically sand paper but more durable

Anti-slip circular saw guide would have been more descriptive. Anyway it's a great idea.

Another "now why didn't I think of that?" moment.👍👍👍👍👍

Оригинально! А я заказал лезер, чтобы линию направления рисовал, а надо-то было всего лишь фанерку отпилить. Отличная идея сделать направляющую, автор молодец!

I like this idea. It’s simple yet effective. And cheap.

Fantastically simple 👌 thank you

When I saw the window in the suggestion margin, I thought - oh no, not another one! I was WRONG! Simple and effective , great idea and uncomplicated video. Thanks for both. 👍🏼🤓

Отлично, мои поздравления за работу и ваши учения, привет из Аргентины.

Everyone stop making circular saw guide videos... this is the best of the best.

best and simplest hack for this problem i’ve seen.

It's nice and inspiring how far you've come, seeing where you are today and where you started. Congratulations.

Great idea !!! Outstanding work. Thank you for sharing.

Brilliant in its simplicity!

I'm making that, thank you, right to the point!

Simple, practical. Good job and thanks for the idea.

NICE VIDEO ....! VERY GOOD PROJECT ...!! KEEP GOING ...

Ustam merhaba. Çok pratik ve kullanışlı bir klavuz olmuş. Ellerine sağlık.

Excellent jig! Keep it simple....... Thank you.

Great idea,nice

very simple good idea Allah bless u

I give this Idea a 8.5 / 10

Simplicity at is finest.

Excellent. The big brands won't like it though.

Simple yet genius! Great idea buddy.

Ty for making a video that doesn't over complicate. Exactly what I was looking for!

So simple but great, thanks going to build one.

Very good video, simple and direct

Other easy and practical project. Tomorrow I'll make mine. Thanks

Thanks for not dragging this out. Good, short video.

In my country this would be called stupidly simple😁 great work mate your head is working unbelievably straight forward👍👍

Thank you. I’m going to make my own instead of buying.

Спасибо. Хорошая идея по использования наждачной бумаги.

Very simple and efficient. We'll done my friend

Excellent and the simplest way to explain it!

And for those of you that don't want to put scratches in the piece you retain... replace the sandpaper with neoprene strip from ebay.

Don’t use sand paper. Use a bicycle inner tube cut in strips. Glue two or three strips lengthwise on the bottom of the guide.

Absolutely brilliant!.. so easy. Glad I saw this before spending ages making one of the other, fancier designs :-))

Excellent idea! Thanks!

very good video.

Awesome tip, thanks for sharing

Outstanding work. I'm lost for words

Amazingly simple and effective!

Best, and simplest one, I've seen yet!!

Simple and attractive, Thanks.

very simple very effective very useful

Amazing and very simple

Great idea!! I could use a guide at times, but the cost verses the use was tough. I will jump on your idea and make myself one. Thanks for the video.

Real brilliant!

Very good idea... I will surely make one... Self clamping with Sandpaper

I am going to make one of this for me. Great projet!!! Excelent idea.

Excelente, me gustó mucho... Es simple, fácil de hacer y sobre todo eficiente.

Love the idea of using sandpaper as a gripper.. Nice one

Wow! That's Great Idea.

Very clever man God bless you.

So the real secret is in the sandpaper........ingenious !

Simple and useful. Best regards!

Lovely, how simple I wish I had thought of this !

The best of the best !! (Less is more)

where was my brain when i made mine? sometimes the clamps move the guide (too often), most times they get in the way. cool tip!!!

Very very good idea

Genius. Thank you very much.

Excellent easy idea. Thx