No video :(

Making A Simple Bookcase - Limited Tools Build for Beginning Woodworkers

Подписаться 1,2 млн

Просмотров 186 тыс.

50% 1

How to build a DIY Bookshelf / Bookcase
In this video HiKOKI challenged me to build a limited tools project. I made this bookshelf using a circular saw, drill, and random orbit sander (plus clamps and measuring tools, etc...)
▸ THE GIVEAWAY - bit.ly/hikokigi...
Hikoki is running a competition to win my Maker Kit. Use the link above, or head over to HikokiUK's instagram to enter. Just tag a friend and comment on my post over there using #MakerGiveaway. Winners will be picked at random on the 1st May 2019. Terms and conditions apply.
Hint, don't forget to watch Mike and Keith's videos as well...and to enter for a chance to win on their posts as well. You can enter all 3!
▸ Modustrial Maker's Video - • DIY Modern Concrete Pl...
▸ Keith's Video - • Making A Cat Bed Cabin...
___
// TOOLS
My Cordless Power Tools | HIKOKI
▸ bit.ly/HKfoureyes
Circular Saw
▸ amzn.to/2GFHmKk
Impact Driver
▸ amzn.to/2GGLkm0
Random Orbit Sander
▸ amzn.to/2L08uYL
My Measuring Tools | Woodpeckers (All The Red Stuff)
▸ bit.ly/wpfoureyes
___
// FOLLOW
▸ Subscribe | goo.gl/oVdN4f
▸ Patreon | / chrissalomone
▸ Instagram | / foureyesfurniture
___
Music
"Improv" by Chris Jon Johnson.
Check him out on bandcamp.com under the name "Sleepy Pablo".
Link - sleepypablo.ba...

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 298

@officer_baitlyn 5 лет назад

Adding a lip to the bottom will prevent bending along the bottom board, I made something similar to this with dowels and adding a slim piece of wood to the front really tied things up nicely

@julietphillips1991 5 лет назад

There is a 2" pocket hole bit... comes in really handy. The bookshelf looks great!

@Foureyes.Furniture 5 лет назад

I've got one in the mail :)

@axelhobson7390 2 года назад

The insulation on the floor is genius. Brings up the piece off the ground to a soft work area, provides padding for the kneeling work and tools. SMORT. Probably even could stick your fasteners in some holes so they don't roll around, and a few other benefits.

@dorito7754 5 лет назад

Chris: I promise you can build this simple DIY bookshelf Me: i don't read books....

@Foureyes.Furniture 5 лет назад

I don't either....it should be called a shoe shelf

@jtotheb-ip2hh 5 лет назад

@@Foureyes.Furniture -- yeah, not a single one of those "book" things in sight! ha ha. nice work tho

@donjizzle 5 лет назад

It can hold so many Kindles.....

@zwardlaw 5 лет назад

Im sure you know this, but DeWalt and Milwaukee (and I'm sure others) have long square drive bits that work great on pocket holes but are shorter than the super long kreg one. They have them at home Depot and help with tight corners, at least to get the screw started. Great video thanks :)

@Foureyes.Furniture 5 лет назад

I actually didn't know that. I'll try to remember to look for one next time I'm there. Which I'm sure won't be too long from now

@idleford 5 лет назад

All the Home Depot’s and Lowe’s that sell Kreg bits only sell them in a 2 pack with a 3” and a 6”bit. At least where I’m at in the south

@stevenozer9901 5 лет назад

Chris Salomone, The DEWALT DWARA100 Right Angle Attachment www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_cp_tai_lQLWCb4J9KE4S comes in in handy in this situation along with a shorter bit.

@JIdeasProductions 5 лет назад

You didn’t have to drip that hard on us with all those J’s

@Foureyes.Furniture 5 лет назад

All videos going forward must contain at least two pairs. It's the new dress code policy...and even I am not above it :)

@pllc17 5 лет назад

@@Foureyes.Furniture flexin real hard on us 😂

@jimmyz1686 5 лет назад

Exactly what I was thinking lol. Hey Chris what are the Jordans from your last video, I've been trying to find them but not having any luck.

@jpgregor 5 лет назад

@@Foureyes.Furniture Well, it seems to be the right time to ask you about appropriate sneaker storage the Foureyes way! Love your work. Greetings from Germany.

@Foureyes.Furniture 5 лет назад

@jimmy z...I'm not sure which pair they were. Usually the only pair that I wear that people dont' recognize are the 33s

@jenders74 5 лет назад

That offcut that bounced up when you snapped it in two? It was a total missed opportunity to catch it and go straight to ninja swords.

@Foureyes.Furniture 5 лет назад

haha...slow motion makes that look much more possible. Especially not knowing it was coming :)

@nabicht 5 лет назад

The dedication to the cubs cap is very much appreciated

@ZachAshcraftPhotography 4 года назад

Just made a smaller version of this out of a single sheet of plywood, and it was my first completed woodworking project! Thanks for the inspiration Chris!

@ClevesBackyardWoodworking 5 лет назад

This is great! I have a wall partition at the top of my stairs and looking into putting some kind of shelving and this video gave me some good ideas. Thanks!

@Foureyes.Furniture 5 лет назад

Awesome. Glad it was helpful :)

@joseportella3081 5 лет назад

I don't have money to support you on patreon but I always watch your videos, I hope for you the best. Please keep doing awesome videos, it's great content. Regards from Peru :)

@goonerjoe93 Год назад

Great video! As someone who is appalling at DIY this video has really helped.

@spudfox6270 5 лет назад

I'm fully here for things I'm promised I can make

@Foureyes.Furniture 5 лет назад

haha...and you can make it! Even out of Potatoes!!!! :)

@donjizzle 5 лет назад

Idaho would be proud

@MADExUS 5 лет назад

Damn you Salamone! That's the second week in a row you convinced me to change the design of my build. I am loving the India ink. Thanks for building something us commoners can make.

@Foureyes.Furniture 5 лет назад

Thanks man. Glad you liked it :)

@davewilliams355 5 лет назад

Nice one Chris, good you are collaborating with Keith as i have watched you both since your beginnings...

@Foureyes.Furniture 5 лет назад

Very cool...appreciate it Dave!

@garagemonkeysan 5 лет назад

Thanks HiKOKI for supporting the maker community, your tools look great. Great video Chris. Someone needs to invent a way to drive pocket hole screws when there's limited space. Izzy? Aloha! : )

@MexLuthor1970 5 лет назад

Kreg sell a 76mm square driver if that helps

@christofix 5 лет назад

That is a nice and simple build! This must inspire a lot of people. I know i did now! thaks for the idea

@EthanCarterDesigns 5 лет назад

Sure, I could build this if I had a garage full of tools - oh wait, maybe I missed the point? I really liked the message/concept of taking the little extra time to set things up right for exponentially better results when you were talking about it on the podcast and it was cool to see it come to life in the video. Great build and video as always, Chris! (still haven't stopped my sign off comment ;) )

@Foureyes.Furniture 5 лет назад

haha...thanks Ethan. You joke, but I'm sure some of those comments will be coming soon. Also, glad to see the streak still intact :)

@fallenbullseye 4 месяца назад

What size screws are you using? Also, no need to pause the video for butterfly. I wish you would have written or typed out the dimensions on the cut sheet... Thank you for this build idea.

@Princessetch 5 лет назад

thanks for adding an Etch A Sketch to the bookshelf

@thesepretzels2058 5 лет назад

Love how you actually wear your Js. Awesome work as well love your content. Keep it up

@Foureyes.Furniture 5 лет назад

Heck yeah man. Made to be worn for sure :)

@bilonay 5 лет назад

Thanks for doing this with basic tools! Been looking for something right alone these lines for a bookcase and a shoe rack. Also, -8< -------> Butterfly

@Foureyes.Furniture 5 лет назад

Awesome...hope it is helpful. We've had a butterfly infestation lately :)

@MetalMouth6963 5 лет назад

I like how you are back in the garage for this

@faisalesmail2051 5 лет назад

Make an Ironing Board cabinet thing. That would be cool and I need some ideas to start.

@redblkgirl99 5 лет назад

I see you flexing on us with the Jordans.

@Foureyes.Furniture 5 лет назад

I need to feel inspired when I look at my feet in the workshop :)

@clagace5121 5 лет назад

So, Indian Ink is the new Epoxy River table?

@furthernorthfab 5 лет назад

Next bucket list sponsor... Nike. Gotta get me them Jordan’s. This is an awesome diy weekend project.

@Foureyes.Furniture 5 лет назад

Dude...if Nike ever sponsored me...that would be crazy. Me and Mike working together like that...gonna be another threepeat

@jonlai9 5 лет назад

Dewalt has a 90-degree adapter that I've used for tight pocket screws with my impact driver without issues.

@felixgla30 5 лет назад

He might not be allowed to use one in a video sponsored by HiKOKI ;)

@oobaka1967 5 лет назад

I have one of those 90's...it's come in handy more than once. Or Chris can just buy a shorter bit.

@KnottenWood 5 лет назад

Flix113 - He can always paint it black to cover up the brand?

@MaidenAlfinete 5 лет назад

I won't build it, but i will like the video because it's another great one. keep it simple, man

@kennethlarsen1571 5 лет назад

Sweet build Chris. And sweet sneaker shots!👟👟👟

@faithpoirier2643 4 года назад

You got me out here wanting to build all this amazing furniture and I don't even own the tools to do it

@moneymakingmikeg.9555 5 лет назад

Another cool one in da books for Chris!!! Wouldn't expect anything less homie!!! Hope all is well, and Dirty Jersey out!!!

@Foureyes.Furniture 5 лет назад

Thanks man :)

@stoppaintingmymonkey 5 лет назад

Amazing! Your videos always make me want to make furniture, so i love that you gave us a good place to start!!

@WobyDesign 5 лет назад

Woodworker’s hypebeast

@Foureyes.Furniture 5 лет назад

haha have you seen the new "Off White" Hikoki line.....i'm getting in line now!

@codyoverocker 5 лет назад

How is no one commenting on the "lost" glasses? SO relatable!

@CrafterMaker 5 лет назад

Lol, yeah

@Foureyes.Furniture 5 лет назад

She was actually talking about her sunglasses...I just like to make her look foolish in the video :)

@outbackoperator 5 лет назад

Nice simple design, will have to try this at some point, onr thing really caught my eye though, the jordan 3s in black cement on the finished project a shoe I have wanted for a while now haha

@Foureyes.Furniture 5 лет назад

they are eye catching :)

@marvelboy409 5 лет назад

3:05, the board falling in the background 😂😆

@Foureyes.Furniture 5 лет назад

yeah, it was windy. If I remember the scene I think it was an insulation panel.

@hyd.. 5 лет назад

I absolutely love the bookcase amazing work👍 and btw the Jordan’s are 🔥

@TranTheClever 4 года назад

this is great. i'm also gonna use it in an unfinished storage room in my basement. 4:16

@pigsydney 5 лет назад

a very nice shelf.

@garydow1540 3 года назад

Don't the neighbours complain about the noise!? Love the channel by the way!

@4kmxsonn121 5 лет назад

creases df outa those shoes damnn

@Foureyes.Furniture 5 лет назад

Yeah...for the most part, my philosophy is use and enjoy them. A few pairs I keep nice though :)

@kalillita 5 лет назад

Best DIY youtuber...

@BackhandBandit 5 лет назад

Underrated shoe game

@spadeucodm5351 5 лет назад

Can I do it using only scissors? 😂

@Foureyes.Furniture 5 лет назад

Yes, but you have to make it out of paper :)

@diocanaja 5 лет назад

Finna build this right now

@garnetsteen 5 лет назад

Another great video. I love that you are doing something with minimalist tools or at least showing a minimalist option. Kudos. Maybe you covered it in an earlier video, but what is that blue base attached to the "MFT-type" table against the wall at the back? It's behind the butterfly at 2:05. It sort of looks like something by Kreg, but I don't recognize it. Keep up the great work. #GoCubsGo

@Foureyes.Furniture 5 лет назад

That's the Kreg ACS. If you go back about 5 videos or so, I have a whole project built using it. Really cool tool. here is a link to that video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4C1Namjo0dM.html

@waldvogelreview7755 5 лет назад

Love the project. I didnt know they sold Hikoki in the states. I love Hitachi and their new Metabo HTP branded stuff.

@Foureyes.Furniture 5 лет назад

They don't sell it here. It's all Metabo HPT here, but it's exactly the same.

@samgambling7312 Год назад

Can you do another limited tools build

@TranTheClever 4 года назад

Love you channel and videos !! Anything home improvement and home makeover is my favourite and I love seeing you transform your home into a place that represents you so well! Keep up the great work I look forward to your videos !! 1:19

@DarinBeard 5 лет назад

I am loving the india ink thing. Do you put finish on over it or just the ink? I want woodpeckers to do a giveaway. You've got some really cool red tools. This is a nice "limited tools" build video... I am not usually a fan because they seem forced by the comment section but you did a really good job of making it seem like this is a proper and legit way to build it and not some hack it together to stop the complaints thing. That's supposed to be a compliment but I have no idea if it came across that way. Love you, man.

@Foureyes.Furniture 5 лет назад

Taken as a compliment :) For the india ink, it depends, but I think some sort of top coat would be ideal for a finish. Not a penetrating oil like i use more frequently

@twillsol 3 месяца назад

Could you get the black dividers in there without pocket holes?

@korah33 5 лет назад

LOVIN the cement 3s

@Foureyes.Furniture 5 лет назад

Thanks man :)

@pescoxuto 5 лет назад

Love it!! Seems quite easy.

@TwoCatsUp 6 месяцев назад

What type stock are you using for this and would you recommend getting a Kreg jig for pocket hole drilling?

@mixedgas2 5 лет назад

Nice, simple build.

@CalliopeFlowerFarm 3 года назад

This is fantastic, thanks so much!

@HowYouCanMakeIt 5 лет назад

❤️ the simple design!

@alyssatew9748 Год назад

From a stability stand point, do you think you could do this same thing but upright? Or would it wobble too much and not be supported enough? So more height and less width.

@hampusruneson2023 5 лет назад

I love it!

@kathrynharrell8590 Год назад

Will this shelving unit be sturdy enough to be filled with books?

@sioadoo358 5 лет назад

amazing work

@jameshinton8561 5 лет назад

Chris, love your videos, but struggle with the Cubs hat!

@Foureyes.Furniture 5 лет назад

haha...it might comfort you to know that i'm actually not even a fan of baseball. I like basketball. I just needed a hat and I choose the C for "Chris' and thought they had a really nice classic looking hat.

@gabrielmullins3560 4 года назад

This American Life meets woodworking

@tq2655 5 лет назад

Another great video Chris

@diegosouza5605 5 лет назад

Uau, sou seu fã! MY TEACHER.

@bigjimbo5993 5 лет назад

Not sure if you remember me from last time, but once again... good job, Chris

@Foureyes.Furniture 5 лет назад

I'll be honest...I don't. But I still appreciate it :)

@mustheard 5 лет назад

Four eyes.... jordan fours.....i see you Chris!

@Foureyes.Furniture 5 лет назад

haha...you're on to me

@FredMcIntyre 5 лет назад

Nice work Chris! 👍🏻👊🏻

@Woodden 5 лет назад

I like the design but I would of stayed with the different colors. I can see many uses for this bookcase.

@rydawgdelta9719 3 года назад

Right angle shaft adapter!

@d.a.tsun5104 2 года назад

Or just shorter shaft. I am not a woodworker by trade but I just built a console table with rungs spaced tighter than this and at first I too wished I had right angle driver, but looking in to my driver box, I saw 2 one-inch drivers and 1 3-inch one. Even with the 1-inch, I still could use the extender.

@rtp1237 5 лет назад

Shoe game is 🔥 🔥🔥

@MrBongels 5 лет назад

Great video. An avid follower of your work

@SamFuller1989 5 лет назад

Duuuude, I know it wasn't that slow when it happened, but if you had caught that snapped board at 2:40 in slow motion that would have been so badass!

@Foureyes.Furniture 5 лет назад

I thought the same thing when I watched it back! but yes, obviously much different in real time :)

@VanOaksProps 5 лет назад

What’s it like to wear Jordan 1’s and 5’s as your shop shoes? Haha. Keep up the good content

@Foureyes.Furniture 5 лет назад

Couldn't tell you...but the 1s and 4s are pretty nice :P JK man. Actually, in all seriousness, the bulk of the time I wear Jordan 33s. And it's funny the difference between those and the 1s in terms of the amount of support they offer. They feel like a tool...where as the 1's feel like you just strapped something to your foot. Lots of progress has been made. d

@VanOaksProps 5 лет назад

@@Foureyes.FurnitureI'm pretty sure I just had to forfeit my sneakerhead card. Yes, Jordan 4s. I keep seeing the 33's but haven't found a colorway that does it for me. I think I'm too much of a classic Jordan fan to be receptive to the newer designs.

@TranTheClever 4 года назад

Is this a imperial ton or a metric ton you're talking about? 2:36

@bs838 5 лет назад

How do you keep this thing from racking? Wouldn't a backer board be in order here?

@Foureyes.Furniture 5 лет назад

No...there were so many connection points on this one it was very stable. I would recommend anchoring it to a wall if you have kids or live where there are earthquakes though.

@bs838 5 лет назад

@@Foureyes.Furniture Awesome, sounds good man. I figured it is one of those things that feels more stable than it might seem. Thanks for following up!

@r-mac1240 5 лет назад

Stepping your J’s game up!

@Foureyes.Furniture 5 лет назад

working on it :)

@mdavies441 5 лет назад

Nice build!

@TranTheClever 4 года назад

Really nice :D 1:43

@lethalmonk6 5 лет назад

What do you suggest for the best matching dowel wood type for filling in the pocket screw holes in Baltic Birch?

@matthewgroza 5 лет назад

William Su um...birch?

@Foureyes.Furniture 5 лет назад

I've never tried it...but I was going to say, there is a "birch" wood that would probably work decently.

@MeliaJanae 5 лет назад

Looks great!

@Foureyes.Furniture 5 лет назад

Thanks :)

@user-ij2sk2wl6q 5 лет назад

Как всегда качество на высоте!

@IEnjoyCreatingVideos 5 лет назад

Nice looking bookshelf Chris! Thanks for sharing the video.👌👍😎JP

@RectanerTreadway 3 года назад

What are those tables you have back there (with the blue metal legs)??

@nathankennedy1145 5 лет назад

I feel special being this early

@Foureyes.Furniture 5 лет назад

Congrats man...you earned it ;)

@hooshangmaster 5 лет назад

you didn't make a bookshelf. you made a sneakershelf to feed your hobby

@mnmlst1 3 года назад

Today I learned a speed square is a couple of bucks in US. In my country it's 1/10 of a minimum wage!

@donniebrunswick4356 5 лет назад

Awesome work as always, Chris. Question on finishing plywood. Do you put a sanding sealer or anything on the plywood before you simple finish or stain? How do you prevent blotching?

@Foureyes.Furniture 5 лет назад

Thank you. I don’t, and I’ve never had any issues. I think it varies species to species.

@justinmedina2969 5 лет назад

Okayyyy I see them jordans🔥🔥🔥

@pdavio 4 года назад

3 inch pocket hole drivers, perhaps a cabinet maker's secret? (dammit, I gave it away!)

@marting.7564 5 лет назад

👏🏽 Love your work.

@joshuamathermusic 5 лет назад

I would watch your videos for the sketchup animations alone.

@Foureyes.Furniture 5 лет назад

Thanks man

@vikramligde 5 лет назад

Chris, you make stuff that demonstrates Art not furniture making. Awesome Cinematography & Editing. May you post videos more frequent?

@Foureyes.Furniture 5 лет назад

Thanks! I wish I could, but they take a long time to produce. So I'm going as fast as I can

@caulintanner7380 5 лет назад

Is this Chris’s way of subtly telling us he’s a sneaker head now?👀

@Foureyes.Furniture 5 лет назад

yes...but not so subtle :)

@caulintanner7380 5 лет назад

Chris Salomone you goin for the Bred 4s next weekend??

@Foureyes.Furniture 5 лет назад

Hell yes! Those were my first Jordans ever when I was a kid. I want to get like 3 pairs. One to keep nice and two to wear :)

@caulintanner7380 5 лет назад

Chris Salomone grabbing a few may be easy since they’re expected to have a lot of stock. You didn’t hit on any of the shock drops huh?

@kentsean1 4 года назад

Would using a dado on the upright partitions work just as well?

@myesque 5 лет назад

Nice work!! Here is a TIP for you! If you take one of the pocket hole driver bits, cut off a little less than half of it, they will fit into much tighter spaces with a drill driver! Be mindful that if you cut it too short, they will cause your drill driver to rub against the upright piece of your work! Love your videos!

@Foureyes.Furniture 5 лет назад

Nice. maybe I'll get a second one to cut short.