This is a video on modeling and making a simple hood designed to fit the square filter holder from Season V Episode 01. (See the link below for information on the square filter holder)
• DIY _Square filter hol...
Due to its simple and short shape, it is difficult to expect the effect of blocking stray light entering the lens. However, it serves to protect the front of the filter and is designed to complement the unfinished appearance of the filter holder. I hope it has the advantage of being lighter and easier to use over the relatively large and heavy matte boxes.
No additional parts are required as it can be fixed directly to the M4 x 25mm screws holding the square filter hold in place.
Use it for personal use only. Commercial use is not permitted.
Refer to the link below for more information and print file(STL).
surplusperson....
시즌 V 01화에서 나온 사각 필터 홀더에 맞게 디자인한 간단한 후드 모델링 및 제작 영상입니다. (사각 필터 홀더 정보는 아래 링크 참고)
• DIY _Square filter hol...
단순하고 짧은 모양으로 인해 렌즈에 들어오는 미광을 차단하는 효과를 기대하기 어렵습니다. 그러나 필터 전면을 보호하는 역할을 하며 필터 홀더의 미완성 외관을 보완하도록 설계되었습니다. 상대적으로 크고 무거운 매트박스에 비해 가볍고 사용하기 편한 장점이 있었으면 좋겠습니다.
정사각형 필터를 제자리에 고정하는 M4 x 25mm 나사에 직접 고정할 수 있으므로 추가 부품이 필요하지 않습니다.
아래 링크에서 3D 출력용 'STL'파일을 다운로드하십시오.
surplusperson....
#MountainBreezeStudio
#Hood
#Square_filter
20 окт 2024