Making FX .177 barrel components Part 1 UK 

So nice of you

Much appreciated

Thanks much appreciated. Thanks for watching.

Thanks good to hear, Thanks for watching.

Thank you very much! glad people are enjoying the vids, thanks for watching.

Thanks, much appreciated. Thanks for watching 👍👍

Thanks for watching 👍👍

Thank you! Cheers!

Thank you! Cheers! Thanks for watching.

Thank you! Cheers!

Thanks for watching

Thanks 👍 Very glad you are enjoying the vids, thanks for watching.

Glad it was helpful!

Thanks for watching 👍👍

Thank you! Cheers!

Yes they are not cheap, i think it's to stop you building your own barrels up, thanks for watching

Thank you! Cheers!

Glad you are enjoying the vid, the lathe was set to 550 RPM for the grooves, the tool is awful thin so any faster and I get resonation through the tool shaft, and just a light but constant tool pressure, fed in by hand. Thanks for watching.

@@sub12airgunners yes i know what you mean by awful thin, i make a few parts myself and one of them is a valve adjuster for the rapid 7. I have to cut a 1mm deep x1mm groove 8mm deep inside a 6mm diameter hole. Its a challenge with stainless ,just wondered if you found the magic revs lol. i will give 550 ago.thanks

Hi, I just got them from a local supplier at work, the tube is a common size so you should be able to find it quite easily. Thanks for watching.

@@sub12airgunners Is the size 14mmx12mm ???? Thanks.

Link below for the tap, I would recommend it, Thanks for watching. www.rotagriponline.com/index.php?page=shop.product_details&product_id=12476&flypage=shop.flypage&pop=0&option=com_virtuemart&Itemid=29

Glad you enjoyed, thanks for watching.

1/2 x 13 , 13 x1 . Am i right ?

The last block I measured was 13.8mm in diameter, although they do vary a little but I would say 13.8 -14 mm would be about right. The grub screws press on the reliefs, not the raised portions. good luck with your project. Thanks for watching.

@@sub12airgunners Thanks you very much, love how much detail you put in your videos

M13 x 1mm, rather than the standard 1.25. Thanks for watching.

@@sub12airgunners thank you very much - really appreciated.

Thanks, we don't have a website, we do sell a little on ebay though. Thanks for the support and for watching.. www.ebay.co.uk/sch/geoffeve-7/m.html?item=373781114992&rt=nc&_trksid=p2047675.l2562

A home made rifle is defiantly on the cards, not sure when but ill defiantly make vids on it.

For the external threads I cut them using the lathe, just with a single point cutter, and the threads in the tube were cut using a Dormer spiral flute machine tap. Thanks for watching.

FX are not selling them at the moment, I am not sure when they are coming out, but hopefully soon. Thanks for watching.

Currently the only .177 liners from FX are 300mm for the Dreamtac Compact and the 500mm used in every other FX rifle. Also the current .177 liners are ST, not STX.

hi you can buy 600mm barrel .177 kit for crown in superlite from huma-air about 300 euros

@@charlesjames8303 I see that a complete 600mm .177 barrel is available on the Huma-Air site but if you look in the Superior liners list on the Huma-Air site it isn't there. giga giga was asking for a .177 liner in 600mm. I don't think it exists.. I don't think a 600mm Crown .177 Barrel exists.. wouldn't be the first time marketing mistakes were made by FX.

@@charlesjames8303 i want only liner in .177 600mm. thanks

that's a standard stx liner👍 you can see the rifling it's pressed in form the outside 👍

@@sub12airgunners I don't understand why a liner has a twist, I thought only the barrel itself has a twist.

Saved myself over £100 in parts by making them myself. Thanks for watching.