Making Soft Plastic Fishing Lures For The FIRST TIME! Mistakes Were Made!

Подписаться 53 тыс.

Просмотров 28 тыс.

50% 1

We finally got our Do-It Molds kit out and decided to make our first few batches of soft plastic fishing lures! We did SOME research, watched some videos, and even took some of your advice... and we still messed up lol. The good news is, even with the mistakes we made, the soft plastics still came out pretty good! We learned a lot about lure making in just a few hours! Now we are ready to keep learning and getting better! If you want to make your own soft plastics, just head over to Do-It Molds and pick up one of the starter kits! More lure making will be hitting the channel, so be sure to subscribe, and comment below what you think we should make next!
#luremaking #aggressivelyaverageanglers #fishinglures
Join this channel to get access to perks:
/ @aaanglers
Join the Knuklehed Bass Series for a chance to win $10,000!
www.kayakbassf...
Check out MONSTERBASS the Better Box and use code SAVE15 to get your first box for $10. LINK BELOW
Aggressively Average Merch: aggressivelyav...
Brand Ambassador:
Get Your Free 30 Day Audible Trial: www.audibletrial.com/aaanglers
Monsterbass: bit.ly/3ASUNkd
Monsterbass Lunkersticks: shrsl.com/3z15w
Mule Fishing: www.mulefishin...
Buzbe Tackle Boxes: buzbe.com/burlyfishing10
OKUMA: bit.ly/2Ns0HV6
Soft Steel Line: bit.ly/3GmkMUf
Fishlab Tackle: bit.ly/38i30oJ
Waterland Sunglasses: www.waterlandco.com use code: BURLY15 for 15% off
Aqua Vu: www.aquavu.com...
Want to send us something to unbox or for the channel? Reach out to us on Instagram (@aaanglers) or email us: info@burlyfishing.com
Follow BurlyFishing:
Podcast: cms.megaphone....
Instagram: burlyfishing and paul_j_glass
Facebook: burlyfishing
Subscribe to my channel: bit.ly/3cPZPRG
Tik Tok: www.tiktok.com/@burlyfishing
My Kayak Videos: bit.ly/2S9MJ9R
My Reviews and Unboxings: bit.ly/2yMotE3
My Tackle Hacks: bit.ly/2W0W4lO
My Fishing Videos: bit.ly/2KGrHMe
My Podcast Episodes: bit.ly/35ePCeX

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@aaanglers Год назад

What should we make next?

@XxNiteStockerxX Год назад

Something with action; craw, Swimbait/grub, curl tail worm

@Jason-416 Год назад

Craw/frog with paddle tail lags

@aronziegler1814 Год назад

Try an open pour mold of some sort.

@cincinnatiking8008 Год назад

Paddle tail

@oceanstateangling9828 Год назад

Hey guys. Protips. 1. Denting comes from the cold molds pulling the heat from the plastic at a fast rate, so preheating with a griddle or even a heat gun to reduce the difference from the ambient temp and the mold temps will help reduce that. (Heat gun can also help warm up the injector). 2. The injectors should pull and push way smoother, try using a little worm oil around the o-ring on the plunger and run it up and down a few times until you get a smooth pull. 3. Bubbles will no longer be an issue if you invest in a vacuum chamber (can also be useful in the future if you decide to make your own silicone molds). 3. With pigments/dyes, the more drops/scoops you use, the more saturated the color of the bait, the more opaque (solid as opposed to see through) it will be. Always start with less drops, especially in a laminate/swirl. 4. Before shooting a set to see how it will match up, you can drizzle some plastic off the stirring utensil onto a work surface to see how they blend, using a teaspoon at max vs over 2 oz of plastic. I'm excited for you guys now that you've started pouring yourselves. The Creepy Crawler vibe is exactly how I perceived it when I started pouring a few years ago. Awesome reference. Can't wait to see how you guys progress on your bait making journey. Tight lines. Side note: Paul... NEVER use that much force to try and inject plastisol... if hot plastic shoots out the sides or with those particular non-locking injectors, the tips come off and it all pours out, you can seriously burn yourself, even through clothing.

@paulglass7268 Год назад

Fantastic tips!

@aaanglers Год назад

Thanks for alm the tips!

@coty7228 Год назад

Need to turn your injector, your shooting one color on each side is why your not getting a laminate. Awesome video guys

@aaanglers Год назад

Did you see the end where these dummies figured it out finally lol

@coty7228 Год назад

@@aaanglers lol I typed this before I saw the end 🤣

@buschleaguebassin Год назад

Also had the creepy crawlers set. It was the bomb! Awesome vid guys!

@sportsock42 Год назад

Nice. You can add some white before the chartreuse. It makes it opaque for more popping chartreuse

@sportsock42 Год назад

Also, heaven help you when you start playing with highlight powder.

@aaanglers Год назад

Hahaha thanks!

@BrownBaitCo Год назад

Heck yeah! Glad yall are messing around with baitin now! Those baits look amazing!

@aaanglers Год назад

Thanks!

@terenceparrish6292 Год назад

I wish you guys all the success in this endeavor 🎉🎉🎉😊I love how you get along ssssssoooooo well!! Please keep it up 😊

@aaanglers Год назад

🤙

@bdooley8469 Год назад

Great first goes on the Baits i think we all have made the same mistakes starting out

@bdooley8469 Год назад

World's worst fishing has awesome videos, Chris makes great training videos

@alandotson6388 2 месяца назад

I cant wait to start doing this

@Jason-416 Год назад

Love this vid. You guys kill me 😂 I’m sure with practice you guy will kill it

@paulglass7268 Год назад

Eventually lol

@aaanglers Год назад

Thanks 🙌

@Darryl_P_ Год назад

We need more of this!

@aaanglers Год назад

There will be more!

@bdiax Год назад

the stale cracker shout out 🤣 im excited to see what you guys cook up with the color combos 🎣

@egomaniac247 Год назад

put that on a cracka dood

@robertcadou7096 Год назад

When remelting plastic you will need to cut it up. And in the winter use a heater on the molds and injector

@aaanglers Год назад

Good call!

@michaelm5203 Год назад

Loved this episode of aggressively entertaining science

@michaelm5203 Год назад

Would love to see rod making for the next science series

@JerryN856 Год назад

I don't think that I have ever commented on this channel even though I've been subbed for quite some time. But I gotta say that this was awesome. Enjoyed it very much. Keep up the good work and fun.

@paulglass7268 Год назад

That’s awesome!!!

@aaanglers Год назад

Thank you!

@lindakepler8500 10 месяцев назад

Awesome video! I'm going to get my grandson, who is a great fisherman, his own starter kit for Christmas I'm on my way to the Do-It site right now!

@egomaniac247 Год назад

Great job guys. This is something I've been wanting to do but I want to make my own mold...I want one of the OG banjo minnows with some limper plastic in a smoke color

@aaanglers Год назад

🤙

@tonygarcia1568 4 месяца назад

Glad you figured it out!😅

@roanoke_yak_angler Год назад

My favorite stormtroopers. It's a process at first but once do a few it's easy from there

@aaanglers Год назад

We're here for the process!

@roanoke_yak_angler Год назад

Killing it!! Keep it up guys. I was gonna do the knucklehead but couldn't make up my mind on which Ned to fish with

@bdooley8469 Год назад

Did the vacuum pump not work that i sent? Don't forget you can heat your molds to prevent prevent bubbles

@aaanglers Год назад

We’re just getting it going. Gonna try that next!

@davidrauschenbach6871 Год назад

Nice colors, Debo for the save!

@aaanglers Год назад

🙌

@davidrauschenbach6871 Год назад

@@aaanglers black with white flakes!

@chaditudefitness5075 Год назад

I remember Paul doing an unboxing video for all this stuff. It was in better condition then. A little more dry.

@aaanglers Год назад

Haha yup!

@davidwilliams1805 Год назад

Great video and great job for 1st time! Thanks for sharing and I hope we will see more bait making videos! It would be cool to see you make some swimbaits. #AggressivelyAverageAnglers rocks!!!

@aaanglers Год назад

On it!

@yakkaboy Год назад

Make sure you are getting a snug fit with that beard! As someone who used to fit test people, most people with any sort of beard, had to shave. It's really difficult to get a proper seal with the mask with a beard in most cases, just food for thought. Safety is always first! I cannot imagine you'd wanna breath in that funky stuff. Great video and keep up the great work. Tight lines!

@aaanglers Год назад

Thanks! I pulled it super tight. We had the garage open too to help. I can never shave this beard lol, my kids would freak out!

@mackflanagan7002 Год назад

The hollow part of the worm is where you stick your rattle LOL

@aaanglers Год назад

Perfect 😂

@madtownangler Год назад

I had a friend of a friend that made a metal mould for plastic baits for one of his finals as a tool and die maker. I have a few baits that he made. He had to design the baits and machine them out of metal and used dowel pins to close them instead of hinges. I used to make them years ago in the plastic things that you could only mould one side of a bait and the rest was just flat. I also made a bunch of rods but I figured out It was just cheaper to buy them. I spent hours spinning a rod in my hands to let the coating dry and the first fish I caught the tip broke off

@willtrax71 Год назад

Very nice can you PLEASE make me some Hellgrammites Lol I can’t find the Yum or afford the Nikko brand.. It’s so exciting making soft plastics I’m glad you guys are getting into it and a partnership in suing with Do It… great video Guys

@paulglass7268 Год назад

No partnership but they did hook us up with a starter kit

@brianbell1851 Год назад

great video ,,, really loved this one , great job guys

@aaanglers Год назад

Thanks!

@sly4139 Год назад

Definitely considering this for those long winter months. What is the finished product like. They’re not salted so more of a yum dinger type plastic?

@paulglass7268 Год назад

Standard plastic at this point, like yum

@aaanglers Год назад

Very much like a dinger, maybe even softer. Sink rate is still good. Already caught some fish on em so…. They work!

@sly4139 Год назад

@@aaanglers that would work for me. In New England with damn beaver dams everywhere so I throw the 4” dinger on a super lite 2/0 ewg a lot. Got it from Creek Fishing Adventures. You get a close presentation to the wacky rig but a lot better for around sticks and branches

@Spc20061 Месяц назад

I have a vacuum chamber, I need a microwave, the injectors, mold, and I was thinking of just melting other soft plastics to start before jumping into color, flake etc

@team3d180 7 месяцев назад

21:34 10 drops green to 25 yellow is such an odd guess but id bet my money

@buschleaguebassin Год назад

BIG SWIMBAITS!!

@IMKINDOFABIGDEAL13 9 месяцев назад

Nice to see some people honoring the show Doug😂

@JeremyMartin-xq7pb Год назад

Paul was clearly training for this video with his shakeweight.

@paulglass7268 Год назад

Ope

@aaanglers Год назад

🤣

@charlescook94 Год назад

Man I'm so glad I found a group for my aggressively average fishing skills

@aaanglers Год назад

🙌

@pesca_man Год назад

transparent zenko with blast of red blood flakes

@steinerp Год назад

Very disappointed you didnt sing spoonman when Paul was banging

@aaanglers Год назад

Opportunity missed 😂

@brucehouze1620 4 месяца назад

How about red white and blue?

@FounderOf4 Год назад

Breaking Bad - Bass Edition! or Breaking Bass!!!!

@AwesomeA Год назад

Hey guys I am trying to get into this what are some tips and additional good things I should know

@aaanglers Год назад

We've made a couple videos covering the gear and making. More to come! Check out our guys Debo's Fishing and World's Worst Fishing for good how to videos.

@AwesomeA Год назад

alright thanks 👍🏻

@viniciussuguio4618 11 месяцев назад

Hello, I would like to know how do I buy the equipment? because I live in Japan and it's difficult to have these materials here!! your video is very good!!

@aaanglers 11 месяцев назад

Thanks! I'm not sure about shipping to Japan.

@lanedavies7 Год назад

I'm pretty sure your not supposed to shake the plastic that much, :)

@hollybunn7352 4 месяца назад

Don’t breathe in the fumes 😂😂But we did it our entire childhood making creepy crawlers!

@cincinnatiking8008 Год назад

I'm getting Breaking Bad vibes 😂

@aaanglers Год назад

Yup

@Jeremya74 26 дней назад

Were is the link to buy what you need to make lures???

@aaanglers 25 дней назад

It’s all on Do it molds website

@glennschramm7255 Год назад

what was the cost of your little bag of worms

@aaanglers Год назад

You mean adding up the amount of plastisol and colorant we used?

@DeepASMR-z6l 10 месяцев назад

How much did you buy in the box? Price? Can you tell me where to buy it? I'm begging you.

@aaanglers 10 месяцев назад

Everything is on Do It Molds website

@DeepASMR-z6l 10 месяцев назад

@@aaanglers thank you

@sonnycarey7566 8 месяцев назад

Where did you get the mold

@aaanglers 8 месяцев назад

Do it molds

@basspeaux 11 месяцев назад

try to twist as you inject?

@bdooley8469 Год назад

You can keep reheating your plastisol... Yep just keep watching and it's there

@XxNiteStockerxX Год назад

Watch worlds worst fishing. Best channel making plastics

@aaanglers Год назад

We called them out in the vid. Learning a lot from him

@charlescook94 Год назад

Mmm reminds me of how every time I put a bag of scented worms with my worms and it gets a tiny slit in the bottom of the bag every time

@HorrorFanaticHFF Год назад

Where do you buy the kit

@aaanglers Год назад

Do it molds website

@tonygarcia1568 4 месяца назад

This videos old but the reason why your laminate didn't come out right is because you needed to turn the plate sideways 😅

@tonyparsley641 Год назад

Lmao. U need me to help you

@hookreelfishing Год назад

With some more practice, yall will get better.

@aaanglers Год назад

🙌

@craqerjaq 8 месяцев назад

95% of what I fish with I make myself now....nothing better than that

@basslesschap346 6 месяцев назад

Gt yourself a heat gun, then warm your molds, I very much liked those 1st neds you made kind of earthy colors, good video guys, lots of fun Lets Go Brandon !

@glxbe Год назад

pig and elephant DNA just won't splice

@IMKINDOFABIGDEAL13 9 месяцев назад

Hahahahaha

@T_J_Fishin Год назад

World's Worst Fishing - Chris Jones absolutely the best bait making videos check him out.

@aaanglers Год назад

We did and mentioned in the video. Been watching him a while and learning.

@hawkins3888 7 месяцев назад

do not try and remelt any z man plastics they do not melt its a special type of plastic

@VinniesFishing1 3 месяца назад

U have to shake your colorant also

@Tightt88 Год назад

A Doug reference!? Millennials for the WIN!

@aaanglers Год назад

🙌finally someone caught it! Nice!

@Tightt88 Год назад

@@aaanglers I was a huge Doug fan. That is, until Disney ruined it lol.

@IIIC3YLOCO 5 месяцев назад

Check out marrking he’s also really great and has done great designs and has killed with some of his lures and plastics.

@mrlrgmouth3692 Год назад

Next time lol.

@killgreen420 Год назад

Turn the injector the other way not in line with the mold

@killgreen420 Год назад

My bad answered before I finished the video

@computeremail4670 7 месяцев назад

Advising the use of a respirator with facial hair is pretty dumb tbh. It's better than nothing, but it's not working as intended. There are dramatic reductions in filter capability due to lack of seal.