Тёмный

Making Spindles for a RACE CAR! || INHERITANCE MACHINING 

Inheritance Machining
Подписаться 416 тыс.
Просмотров 462 тыс.
50% 1

If you’d like to sponsor or donate to the Formula Kentucky racing team check out
sae.engr.uky.edu/sponsorship
For other forms of donation/sponsorship (parts, materials, tools, machining, etc) email the team directly at formulakentucky@gmail.com
This week in the manual machine shop I’m helping out some old friends. When I was at the University of Kentucky, I was on the Formula SAE (Formula Student) team where we designed, built and raced with a Formula 1 style race car. The main competition we attended was at the MIchigan International Speedway, and included many performance based aspects like an autocross style endurance race. As well as engineering design and cost evaluations. Just as was the case when I was on the team, the new team was looking for help in whatever form possible. So I’m lending my machine tools and the little knowledge I’ve built up to help make the front wheel spindles. They are made from 6061 aluminum and connect the wheels and brake rotors to the car through tapered roller bearings. There is a lot of machining involved in these but I’m especially excited for all the glorious lathe work. Already I can see a few side projects creeping up. Enjoy!
#inheritancemachining #machineshop #hobbymachinist
Patreon (Drawings) - / inheritancemachining
Instagram - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
Micrometer patrons!
Joshua Noxon, finn foley, brayden, Jiří Kresan, OttoTheDoggo, Ralph Marshall, Benjamin Limmer, John Justice, Tom Paccioretti, Trevor Massetti, Pierce Heronemus, ZommBoyy69, Justin Schmidt, Parker Schuster, Cyrus Kofroth, owen, Jacob Wiertsema, Keaton, Daniel Nelson, Valodon lol, Patttto, Dalton Smithey, Paul Virdone, Yannick Gürtler, Tanner Trachsel, Robert Cimba, John Peyton Gavin, sebastian steigerwald, Joseph Driemeyer, Flick Freaks, Philip, August, Niels Ravnsborg, Warren W. Woody, Jeffrey Spoor, Domenic Bucceri, Droth, alan ruth, jack walker, Johnny LeMaster, Sri Ram Neravati, Dan Strittmatter, Noel Felix, Tyrese, Darrin Stampe, Benjamin Jäger, adriel alicea, Aaron Bryant, Russell Brantley, Nathaniel Smith, Ethyriel, Martin Jensen, James Davidson, Michael Bender, Shalor McKee, Erik s, eric phillips, Frank B. MsClain, J.N.Alleman, Joseph Garcia, Travis Wolfe, Etienne Huck, Mr R, Steptimus Heap, Connor Hughes, Nils Wagenhals, Lul, Stefan Rohner, Andre Romelle Young, Kollin Knack, Eric Robarge, sebastien frappier, Sam Kelley, Ean Hutcheson, Sami Beaumont, Ethan Cogdill, Kevin Sexton, Drokles21, Jack Champion, Brett, Samppa Turunen, Cory Forrester, Dylan Roland, Blake Foley, mike kruzan, Troy Chappell, Dakota J, Jason Copland, Zac gougeon, Joshua Chambers, Martin Pittams, Jolly_Torch, Tim, Gabe Becker, Justin Gabrielson, Steven Bierlink, David Rahn, Dennis Ray, Sebastian Wridt, James York, John Thomas, Bobby Perkins, Kyle Wellman, Wayne Dorman, Benj King, Gary Bergin, aaron freeman, Marc B, Dave, Zane Alami, Kyle Brown, Nic Vulcano, Arjaan Martini, Aiden, cameron bell, Greg Eppy, Justin Jensen, Lucas, Unknown, Merik Karman, ryker321, GrimmSaber7619, AC Machining & Engineering, drowe1974, Giannis65, Tusai András, Fred Townroe, danny crawford, Graham Poole, Jeffrey Blodgett, Francisco Peebles, Matt.E, Infinite Craftsman, Jason Seydel, Saikho, EAPOL M3, Eddie SpaceMonkey, Mitch Stilborn, Nicolas Brouse, Matt Mansfield, Collin Danaher, Amelia Meyer, Anthony M, mark petovic, Mo SoDak, Gmoney Official, Ben Fisher, Wes, Jack Fountain, Squall, Jarrett, Ethan Vance, Ivan Sehlin, Doug Craig, Reuben, Caleb Butterfield, neal richard, Conner Bean, Adam Knowles, Saul Cervantes, Bruce Lindley, Erik D. Radzius, Clark Schaefer, Zachary Clark, Matthew Vaerewyck, Topher Caouette, Erik Conner, Nevin Spoljaric, Robert Brown, David W, Noah Rowe, Michael P Andersen, Wesley Tullos, Karam Arnaout, Patrick Kennedy, Max, Sandra Carroll, Laz A, Philip Zielinski, ???, Kevers (Adventures'N Moore), lollimewire nineteeneleven, Toon Akkermans, James, Noah, MICHAEL GOSS, Brennan McNickle, Jim Anderson, Benjamin Dubriske, Grant Fenske, Caleb Thompson, Stephen Maus, Samuel Gable, Ralph McCoy, Ethan Blankenship, Chris Williams, Matthew Kosmoski, Terence Kersey, Charles L Popple, Michael Timms, Jose Rodriguez, Jim Hinze
TIMESTAMPS
0:00 Intro
1:32 No Drafting Required
3:06 From the Inside Out
5:27 The Precise Bits
8:04 My Ears are Ringing
11:52 Improvisation
14:50 Where the Wheel Goes
16:30 Side What?
20:28 Hindsight is 20/20
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Making Spindles for a ...
© 2022 Inheritance Machining, LLC. All Rights Reserved.

Наука

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 847   
@paytonlee2896
@paytonlee2896 Год назад
Aye! Currently on K-State’s FSAE Team as the Chassis and Engine Lead. Was watching this as I’m actually about to head to our shop to do some last minute SES work before I head home for Christmas. Alumni are a great resource and have helped us out a lot too. Glad to see you’re willing to help these guys out too. I’ve talked to them a few times at competition and they’re great people.
@TeaMan4066
@TeaMan4066 Год назад
Kansas Gang?
@fernandogonzalez3042
@fernandogonzalez3042 Год назад
Damn you guys are done your SES? Couldnt be me.
@paytonlee2896
@paytonlee2896 Год назад
@@fernandogonzalez3042 Well you see…finishing up in my book is getting it 90% of the way there. We’re full composite chassis and we have layup in two weeks, so you really can’t change anything once you get going.
@fernandogonzalez3042
@fernandogonzalez3042 Год назад
@@paytonlee2896 ah im drexel ev mech lead and we’re doing tube chassis so ours is easier. Im planning on doing a carbon accumulator tho so i need to do testing
@FlaminChicken231
@FlaminChicken231 Год назад
Kansas gang represent!
@InheritanceMachining
@InheritanceMachining Год назад
Thanks for watching everyone and also a special thanks to the Formula Kentucky team for not only allowing me help out with this year’s build, but also for letting my relive an old past time! I had a lot of fun making these parts and hope to see everything else come together in time for competition this summer!
@andrepradokrav
@andrepradokrav Год назад
Can't belive you made part of Formula SAE. I am a former Formula and Baja studend as well here back in Brazil... Just starting to build my own shop for hobby... you are a great inspiration!
@felixcosty
@felixcosty Год назад
Thanks for the video. Just a suggestion if you are going to machine aluminum again, is use high speed steel or inserts designed for aluminum. The inserts you where using are for steel. Used lots of Kennametal inserts over the years, using the right insert makes the job go better. Find a local dealer and not ebay, local people can help advise you about the inserts that are available, and get better price. High speed steel is the inexpensive way to machine aluminum.
@vincenzo6412
@vincenzo6412 Год назад
On another machining channel I saw someone add a spacer between the head of the mill and the body/stand. Might consider doing that if you have the setup to get it done properly. Will add a few inches of vertical work height for projects like this. I'll find the video and link it.
@vincenzo6412
@vincenzo6412 Год назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Puwd0-nLflQ.html At 6:45 he is removing the spacer. He talks about it at other points in the video as well. His space is quite big but for your purposes it seems like counter acting a good portion of the lost height when using the rotary table and chuck would be good without running into the issues he discussed in the video. According to him, to large of a space creates tool length issues and also an angle issue when tilting the head.
@HairyNumbNuts
@HairyNumbNuts Год назад
The chatter was probably mostly due to using the wrong inserts. Aluminium wants sharp cutters and those *looked* like standard steel inserts. It went away with the grooving tool as it was HSS and would, I assume, have had a nice sharp edge. You won't get the chatter in aluminium most of the time as it's damped by being closer to the chuck, but you had a big chunk hanging a long way out there with minimal jaw grip.
@jay_bleu2140
@jay_bleu2140 Год назад
As a former Formula SAE team member, I relate to this video a lot. Having a sponsor like you must have stoked the Formula Kentucky team members. I remember the wheel hubs and uprights as particularly challenging parts to source/machine. As a former FSAE team member yourself, you must have enjoyed helping them with this project. Keep on machining! Love your videos
@InheritanceMachining
@InheritanceMachining Год назад
Thanks! I know every little bit of support we got back then was a huge deal. It was great to be able to help out the team again.
@kentdurham2716
@kentdurham2716 Год назад
I must say, very very nice job. You must have a small fortune in just the tooling to get things done. This a great place to drop by and relax for a few. Thank you for sharing!
@John-ot8rw
@John-ot8rw Год назад
I knew that part in the thumbnail looked familiar! I'm on the Formula Kentucky team this year working on the powertrain subsystem. We're building momentum in the manufacturing phase now and the car should be complete within the next couple months. Awesome to see where some of the parts come from!
@CameronWebne_or_Shadeslayer
Thank you for your help with this project!!! It means a lot for our team!
@InheritanceMachining
@InheritanceMachining Год назад
Absolutey my pleasure! Looking forward to meeting you all!
@TheBookDoctor
@TheBookDoctor Год назад
It's always so refreshing when a maching channel makes something that's not another shop tool or fixture! Don't get me wrong, those are fun too, but it's nice to see people making actual stuff.
@jobkneppers
@jobkneppers Год назад
For the chatter; buy some polished positive rake aluminium inserts. The cut like butter with low cutting forces. They are great to use on such a nice project. For the chatter with the large radius formtool I usually make the final cut by turning the chuck by hand using lots of cutting oil... All the best, Job
@kahnwolfe9548
@kahnwolfe9548 Год назад
My grandfather was a machinist for AO Smith in the late 40's through the 60's. So this channel speaks to me in a way that most people can't quite understand. I very much appreciate this work and the beauty of it even though I am not a machinist myself. Also I see the spam bot has invaded the channel trying to hijack people's information. RU-vid seriously needs an algorithm or something of the sort that could pick up on 20 or more reply posts on the same video with same context and auto ban said accounts. But who are we kidding, RU-vid couldn't possibly make a complex system like that.
@InheritanceMachining
@InheritanceMachining Год назад
I'm glad you like the channel. Thank you! And yeah I just caught it and flagged that spam account. No idea why YT doesn't have that automated.
@TheAruruu
@TheAruruu Год назад
Really? You want RU-vid to use another algorithm? Have you seen what "The Algorithm" has done for monetization? or recommendations? In all seriousness, a fairly basic screening system would be quite nice, and wouldn't need to be that complicated. Instead of outright blocking flagged comments, it should "hide for review", allowing the content creator and/or moderators to review the comment before it's publicly visible. This way the scammers and bots can be reported and removed instead of just being cleaned up after.
@tjh44961
@tjh44961 Год назад
I can relate as well, my grandfather was a machinist at Sperry Gyroscope during WW II, supposedly making parts for the Norden bombsight. I wouldn't know, as I came to that information years after he passed away. I came to hobby machining through an independent path, the live steam hobby. But my dad was at our house watching me turn a part on the old Atlas Craftsman 12" lathe I had at the time, and he told me that my grandfather would have been proud of me, as everything I had learned about machining up to that point was self-taught. I had to stop working for a moment, as everything got blurry -- I must have gotten something in my eye, even though I was wearing glasses... 😉
@markshort9098
@markshort9098 Год назад
There's a scambot on another channel that leaves the same message and WhatsApp number while trying to impersonate the channel owner and I've reported them every day along with a bunch of other people for 10 months now and RU-vid still hasn't deleted their obvious scam channel.. it's become very clear that RU-vid fully endorses scambots
@3Hose
@3Hose Год назад
@@InheritanceMachining About a year ago I saw where a guy had devised a program to detect and report spam bots and released it for free. There was a user version and a creator version (or maybe functionality for both within the same program, it has been over a year). So, users as well as creators could easily report spam bots. It looked like it worked VERY well with very little false positives. I used it on a few channels to see how well it worked. RU-vid never banned those accounts, that's right, the exact same accounts were still spamming in the same channels after being reported. I also never noticed and of their comments being removed either. I guess their ad revenue would suffer if they removed the bots. 🤷‍♂
@imajeenyus42
@imajeenyus42 Год назад
Awesome work! On the chatter, stuff the bore with some rubber tubing or a bicycle inner tube, really helps to quieten any vibrations. Also try a ground sharp insert for aluminium, takes much less pressure to cut and less likely to chatter.
@InheritanceMachining
@InheritanceMachining Год назад
Good tips. Thanks!
@shawnwilson9812
@shawnwilson9812 Год назад
I was just gonna suggest rubber tubing. I keep a selection of rubber bands and tubing in the box for thin wall projects.
@rebmcr
@rebmcr Год назад
Would a live centre in the tailstock have helped with this part in particular?
@shawnwilson9812
@shawnwilson9812 Год назад
@@rebmcr Possibly. Based on the work I generally do I tend to work from the inside out (sometimes even when it’s not the best order of operation) As a result I’m constantly looking for ways to reduce chatter in thin material.
@katanamd
@katanamd Год назад
That's a good idea! I was thinking a rubber strap around the od, like they use on brake drum lathes.
@timknight68
@timknight68 Месяц назад
Some men are crafters. Some crafters are craftsmen. Some craftsmen are masters of their craft. Some masters are artists. You, sir, are among the artists.
@stuartholden2652
@stuartholden2652 Год назад
A trick to "maybe " get out the chatter you fought on your first try is to use a piece of thick flat rubber that you have to fold to get it into your bore. As it tries to flatten out it puts pressure against the walls and can reduce or eliminate your vibration.
@RockyPondProductions
@RockyPondProductions Год назад
Good video man. My old school has a Baja SAE team that provides a great opportunity to students. Unfortunately like a lot of schools my old university loves talking about the Baja program for their marketing but never goes out of their way to provide them with money for the projects. It is up to the students and dedicated staff to raise thousands upon thousands to get a car to competition. So if anyone is thinking about giving back and donating to your university think about directly supporting the clubs that need support. They provide the most important engineering experiences and are so vital for kids early in their careers.
@InheritanceMachining
@InheritanceMachining Год назад
This is very well said. And true. Thank you!
@C.Paul09
@C.Paul09 Год назад
I did not expect to hear about formula SAE on your channel. Ex-member of Romania's FSAE team BlueStreamline, worked on many departments (engine, chassis, brakes, transmission). Been an awesome experience in Spain and Croatia. I recommend it to absolutely anyone who is freshman in collage, you learn way more than just classes. Awesome content !
@InheritanceMachining
@InheritanceMachining Год назад
I couldn't agree more! Thanks
@primo2611
@primo2611 Год назад
This is the best show on RU-vid. The fact that you are a racing fan makes it a million times better. Thank you
@HansMaximum
@HansMaximum Год назад
I just want to say, I found you a few weeks back and crushed through all your videos. Incredible. I was itching for more. I love your story also because it hits a soft spot for me and my grandfather's woodworking shop. I also bought a house that was filled with old veneers and marquetry tools. The estate didn't want to clear it out and I was so happy for a new hobby. Keep up the great work!
@InheritanceMachining
@InheritanceMachining Год назад
That's very cool! Glad you got a chance to work with your grandfather as well. Thanks so much for the support
@andrewdolinskiatcarpathian
@andrewdolinskiatcarpathian Год назад
Unlike most other crafts, the joy of machining is the joy of watching the removal of material. What better example than this racing car part. 👏👏👍😀
@Dextro1945
@Dextro1945 Год назад
I little tip for the vibration I learned from a lathe-guru back in the day. You can get one of these thick rubberbands which are like 3/4 inch wide and wrap it around the end of the part, near the chuck to stop the vibration on these big parts.
@GuyonaMoose
@GuyonaMoose Год назад
surgical rubber tubing. ive also used fire hose when threading massive 24in round oilfield pipe
@JayRussellDuramax
@JayRussellDuramax Год назад
This was cool on so many levels, Brandon! As a graduate from UK in 2017, it's really neat to see you making parts to help out the race team. The spindles turned out great, too, of course! Have a Merry Christmas and a Happy New Year!
@InheritanceMachining
@InheritanceMachining Год назад
I wondered if that was your alma mater 😁 Thanks man! And Merry Christmas to you too!
@timothysavage8299
@timothysavage8299 8 месяцев назад
The best machining videos on RU-vid!!!!
@joselrodriguez5999
@joselrodriguez5999 Год назад
Superb job! 17:18 Brilliant! Thank you for make this difficult year a lot more enjoyable for us machinist out there!
@InheritanceMachining
@InheritanceMachining Год назад
My pleasure. Thank you as always, Jose!
@iemozzomei
@iemozzomei Год назад
Awesome to see how many other FSAE students and alumni are out and about. Thanks as always for sharing!
@InheritanceMachining
@InheritanceMachining Год назад
I'm surprised honestly. It's awesome! Thanks as always
@camoswald6752
@camoswald6752 Год назад
Let's go! Awesome way to end the week
@danbreyfogle8486
@danbreyfogle8486 Год назад
Way back in 1967 while at a mechanical drafting trade school in Milwaukee we drew so many parts, most of which I had no idea what they actually were, other than the drawing title. Once thing that was totally lacking in this study was offering us some opportunity to learn how such parts are made. This would have been a time when everything was pretty much manual machining. It is so interesting to watch how you made these pieces.
@warmowed
@warmowed Год назад
This is amazing! I am an FSAE alum from NCSU and it always makes my day to hear from my team about anything :)
@thercmechanic1182
@thercmechanic1182 Год назад
It’s awesome to see that your so involved in the community. I live about 45 minutes away from UK in Danville, and had no idea they had a race team. You have easily become my favorite channel in the past few months, I can’t wait for the channel to keep growing!
@InheritanceMachining
@InheritanceMachining Год назад
Small world, right? 😁 I really appreciate that! Thank you!
@EnricoMarangonJunior
@EnricoMarangonJunior Год назад
Thank you so much for sharing your joy when doing those parts. They are beautiful pieces, literally handmade.
@InheritanceMachining
@InheritanceMachining Год назад
Thank you!
@TheRecreationalMachinist
@TheRecreationalMachinist Год назад
Beautifully made 👍 🇬🇧
@InheritanceMachining
@InheritanceMachining Год назад
I appreciate it!
@winstonchurchill9985
@winstonchurchill9985 Год назад
As a mechanical engineering student your channel always brings utter joy to my heart. This is true even more so for this build as I am head of electrics in our Formula Student Team (European version of Formula SAE). Having alumni and supporters like you is what makes these projects possible in the first place - so huge respect for reaching out to your former team as well as making this very special pastime more visible to a general public! All the best and a very merry Christmas from Germany! I also love how this comment section not only oozes positivity but seems to rally student racing team members from all around - great stuff!
@InheritanceMachining
@InheritanceMachining Год назад
I really appreciate that! What you said about support is so true. I hoped that I'd be able to help out again one day. Merry Christmas to you as well! Also, I'm quite surprised how many other FSAE/Student alumni and members are chiming in. It's an amazing program to be a part of to say the least!
@ExtraRice365
@ExtraRice365 Год назад
I don't even know what is going on half the time but I still enjoy these videos in a way that's hard to describe. I should probably get back to work drilling holes.
@MarionMakarewicz
@MarionMakarewicz Год назад
Makes me want to go back to college and take engineering instead of the major I did: philosophy. My nephew just finished up at the University of Missouri in Columbia with a degree in mechanical engineering. He was part of the 1/4 scale tractor pulling team. What a cool thing to do. Great for giving back. Sourcing materials and getting assistance was a big part of his work. Especially getting someone to laser cut a few metal parts. On top of it, the engineering building was closed at the end of the semester because of the sprinkler system started leaking. So his capstone project was held captive. He managed. Great work as usual.
@AllThingsMech
@AllThingsMech Год назад
Another fantastic video! I also think it's worth mentioning that I usually skip over most intros, but I really love how you put your videos together. The music elicits a mix of good vibes, nostalgia, and excitement for what's to come - top notch production all around. Hope you and yours have a merry Christmas!
@InheritanceMachining
@InheritanceMachining Год назад
I'm glad because I really like the intro too 😁 Merry Christmas you to as well!
@Alkivar
@Alkivar Год назад
Loved watching this I was part of the RIT Formula SAE back in '96 (F5 team)... I didn't do any of the machining for our team, but I do look back on that time fondly. RIP Dave.
@InheritanceMachining
@InheritanceMachining Год назад
Awesome. RIT's program is legit!
@RobVSdemons
@RobVSdemons Год назад
As a machinist myself I thoroughly enjoy your videos, look forward to them every time I see them pop up on my feed, keep up the good work, fantastic content can’t wait to see more!!
@InheritanceMachining
@InheritanceMachining Год назад
Thanks a lot!
@anthonychiarelli2452
@anthonychiarelli2452 Год назад
I was on my school’s formula SAE and Baja team as well. It’s what got me into welding and fabricating. Awesome work.
@InheritanceMachining
@InheritanceMachining Год назад
Awesome! Thanks
@jasonward4480
@jasonward4480 Год назад
I'm a Mech Eng and former FSAE member. I can't express how much I enjoy all your videos. Thanks for putting out great content, supporting FSAE both in terms of machining for Kentucky and bringing awareness to all the other teams that struggle to find sponsorship. Also a big thanks for shrinking a little bit of the vast knowledge gap that engineers have when it comes to machining, I learn something new every single time. Keep up the great work!
@InheritanceMachining
@InheritanceMachining Год назад
My pleasure, man. Thanks so much!
@bigbird2451
@bigbird2451 Год назад
Damn it. Now I've watched them all. The wait begins!
@InheritanceMachining
@InheritanceMachining Год назад
😁 good this it's only one more day!
@heartsky
@heartsky Год назад
Not hard to see why you have so many subscribers, you're calm, warm, and inviting, and I learn something new with every video. Happy New Year!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 🙏 Happy New year to you as well!
@SundayNobody-ec4tn
@SundayNobody-ec4tn Год назад
Far and away my favorite machining channel on youtube! great work, thanks so much for sharing!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 🙏
@lewissammons
@lewissammons Год назад
Finally, the machine shop has made something besides more tools for the machine shop!😜 I kid of course, very nice project! Thanks for sharing!
@InheritanceMachining
@InheritanceMachining Год назад
I know right? 😂 Thanks!
@chrispoirier384
@chrispoirier384 Год назад
So so soooo many good details about what you’re doing. What worked, what didn’t and your thought process for what you would do next time. I consider what your doing here to be a gift for anyone interested in this type of work. I absolutely love your channel. Keep up the good work. I’m slowly building up my own shop.
@InheritanceMachining
@InheritanceMachining Год назад
I really appreciate that. Thank you. Good luck with your shop!
@budbarlang3729
@budbarlang3729 Год назад
amazing work with manual machines
@YTcustomchris
@YTcustomchris 7 месяцев назад
Very cool!! I don't live but 45 mins from UK. Its nice to see some one from Kentucky making it on RU-vid. I want to get into machining as a hobby. Love the Channel keep it up.
@SouthJerseySkids
@SouthJerseySkids Год назад
my heart skipped a beat when you first put that piece of bar stock on the bandsaw.
@autotek7930
@autotek7930 Год назад
Those are gorgeous. There's just something about machining that gets my blood pumping. I've ran some cnc machines at a factory that made oilfield fracking bits. That's nothing like what you do but I still got that feeling of satisfaction turning those raw blanks into something shiny and perfect
@kraxalublin6262
@kraxalublin6262 Год назад
another gem of a videos
@WeGoWalk
@WeGoWalk Год назад
Wow! How I love to watch your precision machining. It’s like a ballet in precision metalwork…captivating and always satisfying!
@InheritanceMachining
@InheritanceMachining Год назад
Thanks!
@gabrielaires4028
@gabrielaires4028 Год назад
This is priceless. All the effort you put down in every single piece you create - congrats, it's really inspiring! Regards from Portugal
@InheritanceMachining
@InheritanceMachining Год назад
Thank you!
@CorbinMusso88
@CorbinMusso88 Год назад
Go UK! It’s so cool to see such an awesome channel being produced in my state.
@InheritanceMachining
@InheritanceMachining Год назад
😁 Thanks!
@21billybob12
@21billybob12 Год назад
Thank goodness for the upload
@stevenurioste1303
@stevenurioste1303 5 месяцев назад
Aluminum turns so beautiful!
@tadpoleshow
@tadpoleshow 6 месяцев назад
I appreciate all the manual machining and hand ground tools you make. Our shop is a hydraulic repair shop with almost no production, even with some CNC equipment we still dp most work on manual equipment and make alot of our own tools/tooling. We still hand sketch and draw prototypes on a notepad. Yeah a bit Cavemanish but we're still in business while most other repair shops have come and gone. We also have same issue with metric threads on our large lathe (keep half nut engaged)
@BrilliantDesignOnline
@BrilliantDesignOnline Год назад
FAN-tastic! Merry Christmas to you and your family. Thank you, Grand dad.
@InheritanceMachining
@InheritanceMachining Год назад
Thanks as always! Merry Christmas to you as well!
@MaxG628
@MaxG628 Год назад
Aside from the missing zero in that hole diameter tolerance, those look like pretty good engineering drawings. This sounds like a great educational program for trainee engineers.
@michu1736
@michu1736 Год назад
A week ago I discovered your wonderful channel and since then I watched all of your videos. I Don't have anything to do with machining in my life, but your videos are so interesting and relaxing. They really make want to get startet at this craft myself. Can't wait for your next video!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you so much!
@finnkulker3803
@finnkulker3803 5 месяцев назад
Whoa! Im making parts for the formula team delft ( here in the netherlands ) as an internship in the coming weeks. Youre videos gave me loads of motivation as you can imagine. Thanks!
@JanschiGames
@JanschiGames Год назад
You are exactly what all engineers should be. Someone who understands exactly how parts are made and who knows what is possible or not, and in the case of it being not possible how to make it possible. All the tools that you made so far, already gave me some ideas for things to make myself. You are teaching me stuff I would have never learned in the apprenticeship I'm doing right now and most people say our german apprenticeship method is already top-notch, so this is saying something.
@InheritanceMachining
@InheritanceMachining Год назад
Wow. I really appreciate that. Thank you
@matus1976
@matus1976 Год назад
That was a true work of art, such a pleasure watching that. I'm in the middle of making some spindle / hubs for my recumbent motorcycle project. I ultimately decided to farm out the machining. After watching this video - I'm glad I did. Otherwise I'm looking at a dozen side projects and a few thousand in more tools.
@InheritanceMachining
@InheritanceMachining Год назад
😂 Thank you!
@clintongraham5351
@clintongraham5351 Год назад
FSAE Alumni here as well, and this was great to relive the good ole times. I remember the wheel hubs as one of the more intricate and challenging pieces we made, right next to the differential (which I scrapped once). Love the channel, and great to see this sponsorship to an FSAE program! These types of programs are what really launch engineering students to be GREAT innovators!
@InheritanceMachining
@InheritanceMachining Год назад
I couldn't agree more. Also no doubt I had my fair share of scrap on the team as well 😆 Thanks!
@ddoth.
@ddoth. Год назад
That's just a work of art.
@johngarza424
@johngarza424 10 месяцев назад
Watching you man, at your craft is satisfying. The precision and dedication and pride you take in this is well, bad ass lol. As an electrician to another tradesmen, keep up the good work, watching machinist and japanese carpenters at their craft for some reason relaxes me at night before bed. They're accurate and precise and make this stuff look easy but I know it ain't and I know it takes hours to master
@keithammleter3824
@keithammleter3824 Год назад
When I was taught metalwork in trade school many decades ago, we were taught to radius corners by rocking a file, so that you start and finish with the file parallel to the entry and exit surfaces, rocking the file in a counter-way, while moving the point of contact in the reverse direction, in between. Don't follow the curve around. Try it, and you'll see that although it is counter to how you might think you should file a curve, it makes it easy to produce an accurate radius with no flat spots or areas of incorrect curvature.
@embracehorizons
@embracehorizons Год назад
Side project #2= absolute genius. And I'd wager a substantial amount of money to say you got it, at least partially, from your grandfather. Having the right tool for every job is the kinda guy I wish I worked for.😂😂😂
@Argent911
@Argent911 Год назад
What beautiful work, your videos are always so peaceful to watch!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you!
@jasonevers3138
@jasonevers3138 Год назад
It's -6° here currently in the Chicagoland area. This video helped warm my heart. I thoroughly enjoy your content and have been a subscriber from day 1.
@InheritanceMachining
@InheritanceMachining Год назад
😂 It's an even 0 here in KY right now. Really appreciate it man!
@xLIVEDz
@xLIVEDz Год назад
Pleasure to watch. I've looked at the design process of parts like these from the side, still too inexperienced to contribute to them myself but eventually I'll get there and then some.
@BruceBoschek
@BruceBoschek Год назад
Well, you showed just how competent an engineer and machinist you are, and a thoughtful and responsible human being for supporting your old team. I raced sports cars in my youth and had to pay a machine shop to do any fabrication work. I really appreciate the various solutions to problems you found. Sharing them with us is the crowning touch. Thanks so much, have a pleasant and peaceful holiday. Greetings from Bruce, Karin, Halgrim (GSD) and Bella (Malinois) in Germany.
@InheritanceMachining
@InheritanceMachining Год назад
I really appreciate that Bruce. No doubt having access to machines is any racers/race teams dream. Happy holidays to your family as well!
@Kevinpol83
@Kevinpol83 10 месяцев назад
Man as a young machinist who primarily runs cnc’s. This video definitely made me appreciate them more. Manual machining is a very skilled trade, that many would not have the patience for
@MattysWorkshop
@MattysWorkshop Год назад
Gday, this was really generous of you to help the collage team out and the company that supplied the stock, thank you for all the great content throughout the year and wish you a very Merry Christmas and Happy New Year, cheers
@InheritanceMachining
@InheritanceMachining Год назад
Thank you and Merry Christmas to you too!
@keithlincoln1309
@keithlincoln1309 Год назад
I just cannot Express enough how great this channel is! Merry Christmas.
@InheritanceMachining
@InheritanceMachining Год назад
Thank you! Merry Christmas to you as well!
@jackpledger8118
@jackpledger8118 Год назад
Great to hear you story and see the support you gave your team. Merry Christmas
@InheritanceMachining
@InheritanceMachining Год назад
😁 Merry Christmas to you too!
@ChristophLehner
@ChristophLehner Год назад
Love the fact, you offered them help 👌 Quality content right here ❤️
@InheritanceMachining
@InheritanceMachining Год назад
Thanks, man!
@JB-ol4vz
@JB-ol4vz Год назад
Thank you for all your explanation during the operations, I'm learning so mutch. Cheers from SWEDEN
@InheritanceMachining
@InheritanceMachining Год назад
My pleasure. Thanks!
@agamemnon7518
@agamemnon7518 Год назад
Always a good day when you upload, what a great Christmas surprise
@InheritanceMachining
@InheritanceMachining Год назад
😁 Merry Christmas!
@intelligent_box
@intelligent_box 8 месяцев назад
been following your channel for a few months now, and I am absolutely hooked. I knew it wasn't a coincidence! FSAE team lead from Ravens Racing in Ottawa here! Hope you keep up the channel!
@isaacandpatigreene8625
@isaacandpatigreene8625 Год назад
This video had me smiling the whole way thru and teleported me back in time to the UC Bearcat Motorsports FSAE machine shop. Such a cool project... I should call those guys... Merry Christmas to you!
@InheritanceMachining
@InheritanceMachining Год назад
😁 We had a couple interactions with the UC team back in the day! Merry Christmas!
@davidmott2090
@davidmott2090 Год назад
One of my favorite channels. Thanks for sharing.
@InheritanceMachining
@InheritanceMachining Год назад
My pleasure. Thanks!
@baldugzo5387
@baldugzo5387 Год назад
Beauty in everything! A talented person. Good luck, health, peace to all!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you!
@AlexLancashirePersonalView
@AlexLancashirePersonalView Месяц назад
A piece of rigid rubber in the bore does the trick. We used to wrap rubber rope round tube when boring.
@larrymatsumoto7730
@larrymatsumoto7730 Год назад
Those spindles are a work of art, nice job.
@InheritanceMachining
@InheritanceMachining Год назад
Thanks!
@hsjawanda
@hsjawanda Год назад
Gorgeous spindles 😍😍!
@tdg911
@tdg911 Год назад
As always another beautiful part.
@InheritanceMachining
@InheritanceMachining Год назад
Thanks!
@campbellmorrison8540
@campbellmorrison8540 Год назад
Wow your grand dad sure had some nice stuff, he would be really happy to see you using it. I agree its really nice to be able to help others with your good luck and knowledge Merry Christmas
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 🙏 Merry Christmas to you as well!
@michaelrosenlof1084
@michaelrosenlof1084 Год назад
Your combination of project build quality, perfect narration and outstanding videography is a treat every time you post-Thank you very much and happy holidays to you and yours ✅👍
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 🙏 Happy Holidays!
@TheZanzaroni
@TheZanzaroni Год назад
I was part of an FSAE team for 3 years. The struggle of finding a passionate, meticulous person for any kind of help was hard enough, more so if we were looking for a machinist. Congratulations for the help you provide and the quality of your work.
@InheritanceMachining
@InheritanceMachining Год назад
This is always a struggle for sure. I was more than happy to help how I could for that exact reason. Thanks
@charlieb4911
@charlieb4911 Год назад
Amazing as always. Love your vids. Can’t wait for the next one!
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 🙏
@christophercastor6666
@christophercastor6666 Год назад
Been watching your channel for a while now and enjoy every second of it. I received my machining baptism at USF BajaSAE (called minibaja then) and the first year of the Bullsracing FormulaSAE foray. Miss it, the team, and the sense of community that came along with the builds and competition. Biggest shame: walked the tailstock chuck out so far that I snapped the twistdrill and launched the chuck down into the chip pan. I shit my pants and hit the lathe brake and ground simultaneously. Thought I was dead. My teammates picked me up, said I would never make that mistake again, and had me Chuck up a new twisty and finish turning the dozen bungs needed for frame fab. I loved it. Thank you for digging up the memory! -CYCastor
@InheritanceMachining
@InheritanceMachining Год назад
Lathes are scary as shit when things go wrong 😂 But yeah I have a lot of fond memories and long nights with the team doing what we thought was the impossible. Nothing really like it these days. Thanks for sharing!
@christophercastor6666
@christophercastor6666 Год назад
@@InheritanceMachining You can say that again! I propose an alternative to “nothing like it”… Last year I organized a group of high school students with zero Robotics experience and no mechanical skills to build a robot and compete in the FIRST Robotics Challenge. It’s the closest I have come to reproducing the SAE experience. Today, I took some of those students to KickOff for the 2023 season. The game was revealed to us in an auditorium filled with students from all over our state and to thousands of others around the world. It feels exactly like it. Stretching rules for loopholes, learning out of necessity, determination, triumph and failures are all here. FIRSTinspires if you’re looking for a rabbit hole to explore…
@InheritanceMachining
@InheritanceMachining Год назад
@@christophercastor6666 That's really awesome. I might have to see if any of my local schools have anything like that. Could be quite the time investment but also sounds really fun. BTW, this reminds me of a movie called "Spare Parts" that is based on a robotics competition. Based on a true story too.
@mchristr
@mchristr Год назад
Love this content. After seeing the thumbnail I thought, that better be a pretty light race car. I should have guessed Formula SAE. Nicely done.
@ianraybon
@ianraybon 11 месяцев назад
My trick for thin walled components - as you would expect, bore first. But then I stuff paper towel in the bore, compact it down by winding the tail stock into it, keep putting more paper towel in, until the bore is filled with compacted tissue! You will completely eliminate any chatter!
@MarcKulhavy
@MarcKulhavy Год назад
Your videos are one of those I click on immediately to see them. Currently, there is no better machining on the net for me to watch, enjoy, and to learn from. Thank you and keep on going!
@InheritanceMachining
@InheritanceMachining Год назад
😁 Thank you!
@nobuckle40
@nobuckle40 Год назад
Nice work! Setting things up can sometimes be a challenge but I think that's part of the enjoyment.
@InheritanceMachining
@InheritanceMachining Год назад
It's all part of the puzzle 😁 Thanks!
@ClintonCaraway-CNC
@ClintonCaraway-CNC Год назад
Great video!! Once again I watch with amazement. I am a mere woodworker who finds your machining of metal and the ability to make such complex parts akin to having a super power.
@InheritanceMachining
@InheritanceMachining Год назад
😂 Thank you!
@mattevans7068
@mattevans7068 Год назад
As a former FSAE student, congrats! Always nice to help out the team.
@mattevans7068
@mattevans7068 Год назад
And for that pesky chatter on our thin aluminum parts, we would pack some clay on the ID!
@RealStarkIndustries
@RealStarkIndustries Год назад
Another awesome video, thank you for what you do and it’s really awesome to see you giving back to your college. Makes me appreciate your channel even more.
@InheritanceMachining
@InheritanceMachining Год назад
Thank you 😁
@jacobwatts1824
@jacobwatts1824 Год назад
ik what this was the second i saw the notification, i was so exited to see how you’d tackle this and it was beautifully done
@InheritanceMachining
@InheritanceMachining Год назад
😁 Thanks!
@martinmarkmarkovics7754
@martinmarkmarkovics7754 Год назад
I think the vibrations made by the big corner radiuses on the tool edges. The smaller the radius, the smaller the pressure, but it limits your feed rate. You can get tools especially made for aluminium. They have a much sharper cutting edge and polished surface to reduce the tool pressure even more.
@MrLukealbanese
@MrLukealbanese Год назад
Beautiful work
@bendawg3458
@bendawg3458 Год назад
To dampen the vibrations in thin tubes like that you can also stuff paper towels in the bore. It doesn’t work quite as well but at least you wont have a dowel flying at you. Great work as always
@kylestanford6677
@kylestanford6677 Год назад
Firstly, this is some truly FANTASTIC machine work. Your vision for order of operations, “do what it takes to get it done” setups, and tool choice are superb! It may seem super sketchy, but draping a large chain across the part and down into the lathe bed does wonders for chatter and squealing, especially if you can do it on an unfinished surface to avoid damaging the finish. The wooden broom handle trick is also a time tested solution! The chain comes more into play with large diameter hollow rollers. They like to ring with an unimaginable sound level. I have the same 1’ boring bar. On long bores like this, clamp a c-clamp to the back of the bar behind the tool post, you can also hang chain from the clamp. Anything to break up the resonance will help tremendously to reduce the squeal sounds. With thin tubing, like you created before cutting the thread reliefs, pack the inside of the part with something dense. Sand in a bag, rubber tire tube, steel stock wrapped in newspaper, etc. it makes the hollow bar behave as if it was solid.
@InheritanceMachining
@InheritanceMachining Год назад
Thank you and thanks for the tips! The chain idea sounds insane but if done properly I can see how that would work great
@timothysavage8299
@timothysavage8299 8 месяцев назад
You’re the coolest person Ive ever seen on this app
@csneigoski13
@csneigoski13 8 месяцев назад
When I was a machinist, the shop owner was super old school, and explained how when he was in the navy, they used kerosene/camp fuel as cutting fluid when working with aluminum. It helps prevent the chips from gumming up the cutting edge. 10/10 how I will do it forever
Далее
Making a MINIMALIST Wallet || INHERITANCE MACHINING
18:48
кукинг с Даниилом 🥸
01:00
Просмотров 2 млн
Brawl Stars Animation: PAINT BRAWL STARTS NOW!
00:52
Просмотров 3,4 млн
A Better Tool Post Nut || INHERITANCE MACHINING
18:11
Просмотров 328 тыс.
Making a Rotary Chuck Adapter || INHERITANCE MACHINING
19:10
Some UPGRADES for the Lathe || INHERITANCE MACHINING
22:20
Lathe Leveling and Alignment || INHERITANCE MACHINING
14:52
Ball turner build
23:15
Просмотров 56 тыс.
Origins of Precision
30:33
Просмотров 2,4 млн
Surface Grinder Restoration || INHERITANCE MACHINING
17:24
КРУТОЙ ТЕЛЕФОН
0:16
Просмотров 6 млн