Live Free or DIE HOLDER

A FANCY Lathe Tool Height Gauge || INHERITANCE MACHINING

ЭТО РЕАЛЬНАЯ ИГРА ПРО ПАРКУР! 🤪 #паркур #сальто #скита #pkfr

Новый облик. Bentley Continental GT за 700.000 рублей.

❌Не пускают в тц с животными. В чем проблема, не пойму!?!? #pov #story

❌Реальная причина расставания Гуфи и Ким. Девочки, признавайтесь, часто заказываете с вб? #pov

Some UPGRADES for the Lathe || INHERITANCE MACHINING

Inheritance Machining

Подписаться 402 тыс.

Просмотров 649 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Over the past year I’ve taken on many machining and engineering projects so I’ve definitely spent a lot of time with these machine tools; becoming familiar with both their capabilities and their limitations. In this video I’ll be tackling some of the latter. Specifically on the metal lathe. I have a whole list of improvements I’d like to make so I’ll just be starting with the things that bug me the most and going from there. And as always I’ll be taking the “do it yourself” approach to all these upgrades, from engineering design to precision machining. Enjoy!
#inheritancemachining #machineshop #hobbymachinist
Patreon (Early Access + Ad Free + Drawings) - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch: inheritance-machining.mysprea...
Instagram - / inheritancemachining
Website - inheritancemachining.com/
Amazon Storefront (affiliate links): www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
TIMESTAMPS
0:00 Intro
1:14 Upgrade Schmupgrade
3:05 Cocky Is as Cocky Does
4:27 Salvageable
7:18 When Problems Compound
8:39 AutoPAD 2.0
9:54 When the Back Burner Strikes Back
12:11 Now Where Was I?
14:53 Dun' Goofed
16:05 And Screwed
18:11 Carried Away
19:55 One Last Thing... I Swear!
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Some UPGRADES for the ...
© 2023 Inheritance Machining, LLC. All Rights Reserved.

Опубликовано:

7 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@InheritanceMachining Год назад

Thanks for watching everyone! As always stay tuned for another video in 2 weeks on Friday, March 31st where I'll be taking a trip back in time 😉

@rfisher79 Год назад

I’m here for the Side Projects… perhaps a Heat Treatment Furnace? Plenty of resources for the PID and Ni-Chrome Wire on the interwebs

@bruces5 Год назад

Using the lathe ala This Old Tony?

@bendover5546 Год назад

Remember to travel in imperial and not in metric, 15 days or 1500 years is just one tumbler position away. Jokes aside, i admire your work, not just on the camera but with it and editing. You are up there with ToT, Ron Covell, Abom79 and Machine Thinking. Congrats on your success!

@InheritanceMachining Год назад

@@bendover5546 😂 Much appreciated! Thank you

@interstellarsurfer Год назад

11:37 Blood for the Blood God.

@HiRayWilliamJohnson Год назад

I seldom comment on videos, but I must extend my gratitude for the effort and quality your pour into the making of these videos. As of now, my favorite channel hands down. The combination of explaining your thoughts, showing us your shortcomings, and taking us along the whole project is really refreshing. Cheers.

@InheritanceMachining Год назад

Thanks for taking the time! I really appreciate your kind words. Thank you!

@travisboonstra9469 Год назад

Lol I was literally coming to the comment section to say this guy is my new favorite youtuber. Also clickspring

@shaocaholica Год назад

The writing and voice work really pop this channel out.

@OdysBrother Год назад

True

@simplex6941 Год назад

❤😊

@andrewdolinskiatcarpathian Год назад

The full disclosure of mistakes is what makes this the no. 1 machinist channel on RU-vid. First class ideas and execution 👌👏👏👍😀

@InheritanceMachining Год назад

Much appreciated, Andrew!

@Mawyman2316 Год назад

While he is great, I don’t know any machining channel that doesn’t show their mistakes, that’s half the fun of watching them

@ellieprice363 Месяц назад

Reminds me of the many mistakes I’ve made in production shops over the years. It’s so much easier to show them on RU-vid than taking them to the foreman and wondering what he’ll say. Failure is a big part of learning but it sure is embarrassing.

@jockmckenzie8603 Год назад

Awesome content as always. Without a doubt, you have created a top tier machining channel!

@youtubiuttoni Год назад

Yes! He is up there with My Mechanics.

@InheritanceMachining Год назад

Thank you very much!

@jockmckenzie8603 Год назад

The best part is that the quality content started with your very first upload little more than a year ago. Executed brilliantly from the get-go and it shows with the rapid growth subscriber numbers.

@hafidzgi Год назад

I was shocked to see how much your patreon has grown since the last time I watched your video right up to the end (most of the time I fell asleep before the video ends, your voice are soo relaxing, plus the nature of machining sound) Truly a testament to how GOOD your content are!

@InheritanceMachining Год назад

I have mixed feelings about you falling asleep 😂 But thank you!

@hafidzgi Год назад

@@InheritanceMachining sorry😂 but your upload schedule fell around 9-10 PM where I live, and I rarely got the time to watch long format video like yours during the day, so most of the time I watch them right before bedtime, so there's that, I promise its not because your content are boring✌️ Finding good makers content alone is hard, but yours also come with good music, good editing, engaging narrative, AND CAPTIONS! I couldn't be more grateful, thanks a lot man🙌

@MijoMontego Год назад

@@InheritanceMachining Glass half full: someone falling asleep to your video allows it to play 100% without skipping any ads you place in them, so it's a win-win!

@kemikade Год назад

Glad I’m not the only one to fall asleep to machining videos. And agreed, this is a top tier channel to fall asleep to.

@InheritanceMachining Год назад

@@hafidzgi No worries haha I take it as a compliment! Thanks again

@shveylien7401 Год назад

I very much enjoyed this video. I like how you show the mess ups, the poor planning, the equipment failure and have 20/20 narration explaining the failure with retrospect. This is a great video series of your journey that also works well as an educational set. I don't feel quite so discouraged about my failures on the lathe after having witnessed another person go through similar problems and how they thought it through. Thank you for your inspiration and guidance, Keep doing what your doing.

@InheritanceMachining Год назад

We all make mistakes so better to learn from them than hide them. Thanks!

@clydebalcom3679 Год назад

Your new camera setup seems to be working well. These upgrades will help make sure that precision will be easier and more efficient. Will there be a part 2?

@InheritanceMachining Год назад

It has been great! I'll most likely revisit the list but not immediately. I've got some other projects pulling at my interests first haha

@wordwyrd Год назад

the hinge on the second side clamp has a lot of potential to crack that could be eliminated by a small drillrd hole at the end instead of just the slitting saw kerf.

@Hoaxer51 Год назад

I’d do both slots, give it a bit more finished look. Good idea.

@wordwyrd 10 месяцев назад

@@Hoaxer51 All part of the service my friend! I learn more than I suggest from these things too, despite working in a job shop. I just have a whole lot of experience with how to screw up home made fixtures. :P

@MrBassjan Год назад

the combination of the brass and steel for the knobs is to die for! great work!

@InheritanceMachining Год назад

😁 Thanks!

@dave20thmay Год назад

Pun intended?

@LeeStrom Год назад

I watch machining videos from a number of sites on a regular basis but I have to admit that yours is the only one I always look forward to viewing. Your content is thoughtful, systematic and it moves right along. You don't fill your time with a lot of talk and explanations but instead get right into the machining part (which is what all us viewers want to see). You give good close-ups of what's going on and you are not afraid to show your mistakes (like nobody makes them?). You have a good eye for design and I subscribe to your usage of a drawing board first because I truly believe what Mrs. Wright (mother of Orville and Wilber) said: "If you get it right down on paper...it will come out right!" Kudos!!

@InheritanceMachining Год назад

Thanks so much for the kind words, Lee! I like Mrs. Wright's saying as well!

@harryzalessky3465 Год назад

Clicked on the video 24 seconds after upload, that's a new record for me😱

@jasona6427 Год назад

Thank you for showing what went wrong. Often that can be more beneficial than watching what went according to the plan. Great video and work as always.

@InheritanceMachining Год назад

My pleasure. Thanks!

@1960fl Год назад

I like the compound addition you made, but are still only measuring the movement of the compound which is not directly in relation to the change in radius of the cut due to the compound angle. I built a similar tool that mounts the anvil to the cross slide and allow you to set the dial indicator to the compliment of the compound's angle; thus any adjustment in the compound is read on the dial as a true change in cutting diameter. Keep the videos coming I love your work.

@buckinthetree1233 Год назад

You're correct. I hope he reads your comment. However, I suppose this could be useful if you need to do some trepanning to a certain depth using the compound.

@KnowledgePerformance7 Год назад

Is there a setup to achieve this? It might be simpler to do the trig beforehand and not have an annoying setup to fiddle with every time. This setup also lets you do the trick or rotating the cross slide to cut at an angle and get more precision due to only a component of the slides motion moving into the cut.

@buckinthetree1233 Год назад

@JBpiification you can do this same modification to the cross slide, and that will give you a direct reading to how far you're advancing the cutting tool directly into the work. Adding a DRO is quite pricey, but I believe they make those digital linear scales that are used for quill depth on milling machines long enough to attach somehow.

@InheritanceMachining Год назад

Yes that is true. I can see the advantages of a setup like you describe. My primary uses for my indicator setup will likely be tramming the compound angle more accurately (needs a second indicator) and operations like multi-start threads where the like I did on my machinist jack. Thanks!

@buckinthetree1233 Год назад

@Inheritance Machining I think the easiest way for a multistart thread is being able to index your chuck or headstock. I'm going to have to checkout the video you mentioned. I really hope that my comments don't come off as being critical because you do outstanding work and have excellent problem solving skills. It appears as you've been doing this for decades. I'm only attempting to share my knowledge in hopes that one day you might find it useful. Thank you for taking the time to share your work with the rest of us. I look forward to your next video.

@TgWags69 Год назад

Regarding your arbor. Any attempt at filling the gouge with weld will likely warp the shank. I would remove the burrs and mill in a new keyway on the opposite side. For the marks on the main body, kill two birds with one stone by milling some flats for a wrench. This will remove the marks and set you up to remove it next time. Because if you prepare for it, it won't happen again lol.

@InheritanceMachining Год назад

Ain't that the truth 😂 Good ideas

@Skylineview713 Год назад

Even though i'm not a machinist, it has always fascinated me. I love watching your videos!

@InheritanceMachining Год назад

Thanks! Everyone is welcome here

@AlienBmxican 9 месяцев назад

I like you show the mistakes, as well as the frustration that comes form the mistakes. Shows the learning process

@bamngg Год назад

Truly love your style, and the zero hype. We all make mistakes and instead of hiding them, you help us learn from them too. thank you sir.

@InheritanceMachining Год назад

My pleasure. Thank you as well!

@briansavage932 Год назад

I needed this soothing content today. In fact, I think Im going to watch/listen to the whole channels worth of videos again at work today. It's really good to see how big this channel is getting. Well-deserved.

@InheritanceMachining Год назад

Thanks, as always Brian! Enjoy the ride

@designsbyty 9 месяцев назад

As I binge through your videos I wanted to express how much I enjoy the way you tell each story. I'm a design engineer that is an aspiring machinist and find each video an emotional rollercoaster. 😅 You've got me literally lol'ing and grieving with each mistake. The highs and lows are so relatable and I love seeing how others tackle dificult problems. As an added family benefit my 4 year old daughter and 2 year old son are completely captivated by your content and it leads to great conversation about manufacturing. ❤️

@Sabe-Stormrage Год назад

Decent modifications to get a little more accuracy out of your projects, as for the slitting saw you can just TIG Weld the damaged channel and redo the surface on the lathe. [and probably check the inside of the Mill mount to see if it needs a little resurfacing after the jamming]

@krasbestendig Год назад

I'm getting "applied science" vibes from your accent. I love how ok you are with sharing mistakes. You working to fix the mistakes is far more enjoyable than: I did x,y,z and it works, I've done it for years

@InheritanceMachining Год назад

I appreciate that! Mechanical Engineer

@barrishautomotive Год назад

I've been rebuilding various components on my old Springfield 280 lathe, and along the way I've been adding thrust bearings to features. What a difference.

@punknoodles0 Год назад

I just want to say, as someone who used to work in a manual machine shop, your vids are so great to watch!! Keep it up man!!

@mrimmortal1579 Год назад

Another brilliant video! I love watching you do old-school drafting to make your technical drawings, but I was also pleasantly surprised to see that you are proficient using the same auto-pad software that I’ve counted on for years! Straight lines and crisp details are all well and good, but nothing beats a hastily scratched-out drawing on a sheet of notebook paper or on the back of a junk mail envelope!

@InheritanceMachining Год назад

Well said! 😁 Thanks

@1Barrett50 Год назад

The ONLY use for junk mail ! 😄

@MadMathMike Год назад

The juxtaposition of your calm and intelligent narration with the aggressive (and understandable) cursing when things go severely awry always cracks me up! 😂 Fantastic video!

@InheritanceMachining Год назад

😂 Thanks

@wrstew1272 Год назад

I think that a special award should be presented for this specific act! Well played Mate! Good on ya! Cool!! Wowzers! Now iffn you need any help with the correct wording for specific pain, feel free to contact me for an encyclopedic vernacular gained from too many years of dermatological abuse….. or as is the new explanation- BenDare, DunDat. Gramps must have been a wonderful role model.😊

@InheritanceMachining Год назад

@@wrstew1272 😂

@dannyl2598 Год назад

You,Sir, amaze me. Also, I have learned the hard way that a lot of the taper pining on the South Bend lathes were hand drilled, so you are keeping with tradition. Thanks.

@BronsonDorsey 11 месяцев назад

It made me smile to see your old-school drafting technique with a drafting machine and pencil. That’s how I learned to draft in high school before switching to a parallel bar and triangles in architecture school. Great content!

@copescale9599 Год назад

It was cool to watch you make these tools it is even cooler to see you go back and fix mistakes vs just acting like you're perfect!

@InheritanceMachining Год назад

That's what I do 😁 Thanks!

@PaulsGarageProjects Год назад

Wonder if the compound has a metric lead screw with an imperial dial?

@InheritanceMachining Год назад

The math doesn't seem to work out that way. I'm suspecting the imperial screw was approximated on a metric lathe

@Chiefs1582 Год назад

What I love about this machining channel is he shows the challenges in machining.

@jamesmclemore7112 Год назад

Absolutely love this channel. I’m currently studying manufacturing engineering technology and getting glimpses into your design and problem solving process is really inspiring. Machining is something I’ve always found interesting but difficult to begin with, but your presentation of it and showing the mistakes you make along the way make it seem more tangible, and I think it’s part of what makes your videos so enjoyable. Keep up the great work, can’t wait to see what you do next!

@InheritanceMachining Год назад

I love to hear that, man. Everybody in this trade makes mistakes so better to show them so others can learn. Thanks for the support!

@randomtechnician Год назад

Great collection of small projects!

@samsamm1402 Год назад

is this technically a whole video on side projects? lovely

@GS-wq7lm Год назад

soothing to watch and listen to you work. I love seeing manual machining. As a CNC machinist this is always so cool to learn about.

@Horus9339 Год назад

Thank you Sir, you do not know how much I wish I had access to a workshop like yours. Seeing you make beautiful tools/parts really makes me happy. Have a blessed day.

@InheritanceMachining Год назад

Maybe one day? Thanks for the support!

@agamemnon7518 Год назад

The legend himself returns, gotta love upgrade videos, they're super nice. Hoping we don't see a return of the box of shame

@InheritanceMachining Год назад

😎 Thanks, man

@Thoron_of_Neto Год назад

This was as thoroughly enjoyable as always! One question: how many cool points before a side project can be removed from the count for a video? I kid, but those tools bear the trademark clean and gorgeous design, and wonderful functionality I truly enjoy watching! Thanks for bringing us along!

@InheritanceMachining Год назад

I think it would need at least 100 points! 😂 My pleasure, man. Thanks as always

@KyleSturgeon Год назад

The thing I love most about your videos is that things are rarely perfect until they are. It’s comforting to see a skilled person biff it every now & then.

@InheritanceMachining Год назад

All part of the learning process. And it seems to be helpful for a lot of people seeing when things go wrong. Thanks, man

@LaxianKey1 Год назад

One of the last few Keuffel and Esser Paragon Drafting Arm users left in the world :). I remember my ME father using one when I was a little boy (60+ years ago). Thanks again for the great content and another enjoyable Friday morning.

@InheritanceMachining Год назад

You might be right about that! Thanks

@jettherrin5463 Год назад

Not sure if it matters but personally if I had to repair that saw keyway I'd file the burrs, fill the mark with a tig weld, then re-turn and mill the keyway to remove excess weld material

@InheritanceMachining Год назад

I've been considering this but am weary of inducing a bow in the shaft

@jettherrin5463 Год назад

@@InheritanceMachining maybe make a test piece, like turned down to roughly the same diameter, weld a little bit then see if the runout is acceptable

@-IE_it_yourself Год назад

@@InheritanceMachining weld both sides. IANAW

@carters2 Год назад

Just have to remember that when using the indicator you will remove twice as much material as indicated. I’ve been burned by that before because my hand wheels are all “direct read” and was used to dialing 1 thou to remove 1 thou.

@InheritanceMachining Год назад

Good point. The dial on the compound is direct read as well so I'm used to that

@Gottenhimfella 11 месяцев назад

Direct reading dials do have advantages, if you use the lathe for more than just plain turning. Maybe you might mount a subspindle for drilling holes in the face or periphery of workpieces which they're still held true, maybe you might mount a job on the cross slide for line boring or trepanning, or other possibilities too numerous to mention but handy in a small shop without specialised machines for every job. In such cases it's desperately easy to get it wrong because they are few and far between.

@Gottenhimfella 11 месяцев назад

After posting this I realised the discussion was about compound slides. These ALWAYS have direct reading dials (unless the lathe maker is a cretin), for reasons which will be obvious on reflection. I think the original poster might have been thinking (as I admit I was) that this indicator was on the cross slide.

@DrTheRich Год назад

This has become one of my favorite builder RU-vid channel. I really enjoy your videography and classy video style! Very high quality.

@InheritanceMachining Год назад

Thank you very much!

@Dylise Год назад

lol so glad i found this channel on a nice Saturday morning. I really enjoyed it, like his narration/video style. I'm a cnc lathe machinist/set up guy in a job shop myself. I really enjoyed it, and see there are plenty of videos to catch up on. well done.

@rizalardiansyah4486 Год назад

So basically what you've made is a mechanical DRO, right? Or in this case, an ARO (Analog Read Out). Impressive!

@InheritanceMachining Год назад

I like it!

@alexwbakker Год назад

personal advice: remove the pin in the quill. it does nothing once you have a power drawbar

@sevenninthsfabmachine Год назад

Agreed. Came here to say this, but I see Brandon has already liked your comment. Ditch the pin!

@TheFreshmanWIT Год назад

I don't have a power drawbar, and STILL love having it without the pin. It allows you to 'thread' in the collet 95% of the way from the bottom, so you only have to pull out the wrench for the last 1/2 turn.

@chris_0725 Год назад

Your Videos really are my comfort zone. Watching them im instantly relaxed and fell good. Also they are very entertaining. Thank you for making them

@InheritanceMachining Год назад

My pleasure! Thank for watching!

@Az-om8rw Год назад

Not only great content but I love how you make your drawings available for all budding engineers!

@pedroernestobraga Год назад

I came faster than that bluening layout ink drying

@keithbowman7650 Год назад

Stay classy, bud. Whatever happened to just saying, "I really enjoyed your video."?

@badjuju6563 Год назад

@@keithbowman7650 Bwahahaha

@pedroernestobraga Год назад

@@keithbowman7650 I'm Brazilian we can't simple do the things in the easy mode...

@Chilangosta Год назад

Loving the growing collection. Crazy it's been a year!

@InheritanceMachining Год назад

You're telling me! Thanks

@PrestoTenebroso Год назад

Nobody’s perfect; Try and go easy on the negative self-talk. It creeps….

@SGIABC Год назад

As a Tool and Die maker myself, I can tell you that one of the things that I love most about the job is its ability to humble you at any given time. I've been at the job for a little over 10 years now, and the amount of learning that is needed is endless. The job has honed my problem solving skills so that no task seems impossible, even if said task is to be done on less than adequate equipment. That being said, I really appreciate you including the mistakes and trials you have to go through with the design processes and testing of your projects. You are technically prototyping every piece you create in your shop, so a certain level of error is to be expected. The finished outcome is so satisfying! Thank you for sharing, as always!

@InheritanceMachining Год назад

That's one of the things I love about machining as well. There is always more to learn. But with every new skill comes a little more confidence. Thanks as always, Small Guy!

@outdoormountainman Год назад

I have just discovered your channel and absolutely love it! I’m a self taught machinists that has been operating equipment for over 40yrs now and always love watching someone else make awesome projects and even have my wife interested in your channel. There is definitely some neat projects here that would definitely make my life easier and, just be cool to make. Simply awesome!

@InheritanceMachining Год назад

Glad to have you! That's the great thing about machining. There are always more things to learn and better ways to do things! Thanks for the support

@stuartupton5502 Год назад

Ya know, Out of all the machining channels out there, You've got it down. Perfectly executed (Unless something goes awry) and so very very calming.

@InheritanceMachining Год назад

You are very kind. Thank you!

@rexwinfrey9747 Год назад

I enjoy your videos. I started machining professional in 1981, and I am still learning, often from you. I also like the fact that you show errors. I still make them.

@darshanaalles6780 11 месяцев назад

love your videos man. Im the furthest thing from a engeneering/technically inclined person, but watching your channel has inspired me to somehow start becuase I love this stuff. Thank You.

@keithlincoln1309 Год назад

Another top notch project. All the way from your camera work and editing, to the beautiful finished product. Always a joy to watch!

@InheritanceMachining Год назад

Thanks. Keith!

@TheRecreationalMachinist Год назад

Another beautifully crafted video of a beautifully crafted tool. I really must get back in the workshop...

@InheritanceMachining Год назад

Life get's in the way I know! Thanks as always

@pedrogromann3372 Месяц назад

I love how a lathe and a mill can get you so much precision. You use the tools to make parts for the tools, so the tools are more precise. And with enough material and energy, you can do that over and over until you have the most precise machine ever.

@CockatooDude Год назад

I always love the difference between you in the shop and you doing the voiceover.

@chipbruner2412 Год назад

Outstanding! Thank you for showing your failures and how you learn from them instead of cutting them completely.

@InheritanceMachining Год назад

My pleasure! Thanks

@eliseojacome3031 Год назад

The new handle update visibly tightened everything down in a very satisfying way. Akin to a runner getting into position at the start of a race

@demoncore4467 Год назад

Your videos have become my favourite evening or after work “show” such a nice thing to kick back and relax to

@InheritanceMachining Год назад

Glad to hear that! Thanks

@itarry4 10 месяцев назад

Your "acceptable finish" is most other people's "Wow look what I did!" great work honestly next level attention to detail. Especially love that you draw your plans by hand.

@Valisk Год назад

I only discovered this channel at the start of the year. It's become one of my absolute favourites.

@InheritanceMachining Год назад

Love to hear it! Thank you 🙏

@EngineerRaisedInKingston Год назад

Haven't even started the video and I've already clicked like. How do I know it'll be good? I just do. What a brilliant way to spend a friday afternoon. Edit 22min19s later: I was not wrong. Once again, absolutely brilliant. Moreso still, I love the fact that you're not afraid to show things that go wrong. True goalpost for youtube machinist channels.

@InheritanceMachining Год назад

Always so kind, Erik! Thank you!!

@craigguinn5423 10 месяцев назад

Impressive. I love watching the techniques. I never can tell if these are things I’ve forgotten, or totally new.

@jasonpowell8582 Год назад

17:19 “Part” way there… Touché, sir. Well played. 👏

@timmey001 Год назад

Amazing content, I swear I have never machined anything in my life. Butwatching you makes me what to go and sit at the feet of the master to learn.

@InheritanceMachining Год назад

If you've got the means, go for it. You might find yourself obsessed like most machinist before too long lol

@AndEcho Год назад

These videos have become an important part of my Fridays. They are so calming and wonderful. Thank you so much!

@InheritanceMachining Год назад

My pleasure! Thank you for following along!

@tyronreynolds2497 Год назад

Absolutely love your channel mate. As a young apprentice fitter machinist from Australia I definitely look up to your work and have so much respect, because I know first hand the time and effort machining takes. Keep up the great work mate 🇦🇺 🤟

@InheritanceMachining Год назад

I really appreciate that, man! There's nothing fast about manual machining 😁 Thanks

@esrAsnataS Год назад

More great machining content, enjoying it on my holiday. I agree with the chamfers.

@johnstirling1104 Год назад

Love that you show your mishaps. Keeps a hack like me from losing all faith in myself.

@bigmotter001 Год назад

I just subbed! Great video, no BS, no annoying background music, great sense of humor and highly educational! Thanks for the posting and take care! P.S. Also a great radio type voice!

@InheritanceMachining Год назад

Welcome!

@cryoine7194 Год назад

some lathe upgrades in the quest of turning perfection also many of those drawings are beautiful to look at. i can imagine fans of the channel wanting them as pieces of technical art

@austinmosier1616 9 месяцев назад

watching these videos with your voice is perfect for mellowing me out before bed love the content

@johndonlan5956 Год назад

Sometimes the most important lessons that we learn in machining....... Are learned through mistakes and failed attempts. I became a very good manufacturing engineer muchly because of all the mistakes I made. And you're right about trepanning..... It's a very sexy process. But it takes a concentrated amount of planning, especially in the clearance angles needed in your trepanning cutter. I can't begin to tell you the headaches that I had trying to program in a trepan on a flange made from hastelloy (on a CNC lathe). But, as you've discovered, it feels terrific when you finally get it right!!!

@russianbear2 Год назад

This is the most tranquil channel out there. Love your videos man!

@InheritanceMachining Год назад

thank you 😁

@chrisviking428 Год назад

I must admit, I love the way those knobs turned out. And while the operation looked easy, I know it was the time well spent on that knurling tool that made that part of the operation “Look easy”. Great job Brandon!

@InheritanceMachining Год назад

Oh I'm using that knurling tool every chance I get just to make it worth it haha. Thanks, Chris!

@gabrielalvarez9570 6 месяцев назад

I really appreciate you being honest and straightforward when you make mistakes just like in real life.. That motivates an apprentice like me to believe in myself , Thank You 🙏

@InheritanceMachining 6 месяцев назад

Hey we all do it, man. No sense in acting like we don't!

@aniciorossitorella7794 Год назад

Thank you Sir for your contribution to my full relaxing! I always keep your projects like a sweet candy before going to sleep and watching them gives me an internal pleasure that really calms me down. Maybe the voice, maybe the music (awesome!), surely the ensamble ot all the things. My best preferred videos. Thank you!

@InheritanceMachining Год назад

You are very kind!! Thank you

@SweetTooth8989 Год назад

Ahh now I understand what the upgrade was from your post the other day. The dial indicator mount upgrade is also a great one that will serve an important purpose and also looks great.

@InheritanceMachining Год назад

Thanks!

@ridley674 Год назад

Oh damn, there it is again!! I get so engrossed on these videos!

@guillaumepicard8666 Год назад

I am so happy to see you have a long list, not that I enjoy knowing that you have a long way but more the fact than more content is on is way🎉. I am not quite sure why I love you video I am not even a machinist I just make videogame. I think, your editing, narration and the fact that you are so humble hit a sweet spot in my french Canadian brain. Long live IM!!!🎉🎉🎉

@InheritanceMachining Год назад

Honestly my list never get's any shorter. And I prefer it that way! Thanks for the support, Guillaume!

@joefebri3236 5 месяцев назад

I learned alot of things here and would "steal" Some of the design in the future for my personal project. Thanks 😁 I'm envious of how nicely preserved tools you have and also you have the right tools for the right job, as I don't have many tools where I work, but I'm sure I would make them in the future.

@edsmachine93 Год назад

Very good idea. Nice work. Will come in handy for precise work. Handy for threading as well. Thanks for sharing. Take care, Ed.

@InheritanceMachining Год назад

My thinking exactly. Thanks!

@JM-yp8du Год назад

Where other channels might purchase a new machine and then spend a video showing it off, you spend a video showing how you used your skills to solve the problems with your current machine. Great content, great attitude! Love it!

@InheritanceMachining Год назад

Much appreciated!

@todddaniels115 Год назад

Always a good day when IM uploads a video. Great content, love how you break down every detail to where a non-machinist like myself can understand the process.

@InheritanceMachining Год назад

I love to hear that! Thanks!

@swampy1584 Год назад

Cracking vid as always love the warts and all approach

@afryhover 5 месяцев назад

I really enjoyed seeing your drafts at the drafting table. Well done 👍👍

@denachtegaal2007 Год назад

Again a great video to watch! Thank you so much for your time and effort in making these.

@InheritanceMachining Год назад

My pleasure! Thanks for following along

@teis79 7 месяцев назад

Just subscribed! Really like your videos and a lot of things are common practice haha, good to see that other people come across the same problems on their projects. No showing off, just real life projects and the hassle that comes along. 👌🏻

@keithviolette5870 Год назад

Beautiful work again Brandon. I love watching your "Machine Shop Therapy" videos after a long week of engineering management. I did get some shop time in this week, but it was also work related - I designed and machined a super-HOT inspection fixture for a tricky to hold and measure part. Our internal machine shop is AMAZING, but they are backlogged a couple weeks. I've always thought of the R8 keyway as a weak point on Bridgeport milling heads. Happy that mine uses NMTB-30 tooling with two large drive lugs. I'm sure you'll get the slitting saw arbor cleaned up. I love the design of the compound indicator mount, will need to make one for my trusty old 9" South Bend lathe. One option for making the brass knob screws faster could be to use standard socket head cap screws instead of single point turning them. The straight knurled OD of the SHCS head can then be a press fit into the top of the brass knob, with the straight knurl of the head transmitting the torque. Also gives the additional feature of being able to use an allen wrench to tighten/loosen it if needed.

@InheritanceMachining Год назад

Clever idea with the SHCS! On the R8 a lot of folks are suggesting removing the key from the mill altogether since the taper should be what carries all the load. Thanks as always Keith!

@keithviolette5870 Год назад

@@InheritanceMachining I suppose removing the key is a good option. You may want to check how tight the impact wrench is tightening the drawbar as well. That could be the root cause.

@InheritanceMachining Год назад

@@keithviolette5870 I do get a pretty wide fluctuation of air pressure in my system. The pressure switch on my compressor is probably older than me!

@midnightsuns1000rr Год назад

Another excellent video. Keep making them and I will keep watching them.

@InheritanceMachining Год назад

I'm not stopping now 😁 Thanks!

@JiinxMovies Год назад

Not sure why exactly but this was my favourite video of yours. Great work as always.

@InheritanceMachining Год назад

Interesting! Thank you

@jamesdespain2238 Год назад

Wow! Beautiful!

@tinyong309 Год назад

Nice fixture for the compound slide and nice workmanship.

@kcdakrt Год назад

I would watch 1hr plus videos of your content. Idk what it is but you and clough are my favorite content creators. This channel should hit 500k easily. Best of luck to you.

@InheritanceMachining Год назад

Thanks! James is great!

@uspittbullbreader Год назад

Awesome work just found the video that talked about buying your plans. Thank you very much from a newbie just getting started.

@InheritanceMachining Год назад

My pleasure! Thanks for the support!

@BlueCollarDollars 7 месяцев назад

i absolutely love your videos, i am a novice machinists currently pursuing my degree in mtech industrial machining, my end goal is to be familiar with CAD and eventually integrate my machining skills with my love for engine building, this channel is probably one of my favorites, i never find myself watching mindless videos anymore , its always machining and i love it, im always learning something new here and im so glad i found you!!!

@BlueCollarDollars 7 месяцев назад

love seeing the way you think, the way you work, and the elegance behind it, though you are not a lifetime machinist you conduct yourself like one and that is something i strive for

@InheritanceMachining 7 месяцев назад

I really appreciate the kind words! Glad you're here. Good luck with the training!

@Abrikosmanden Год назад

May this intro music forever be part of my Friday evenings! Thanks for another good one :)

@InheritanceMachining Год назад

😁 Thanks!

Далее

Live Free or DIE HOLDER

29:19

Live Free or DIE HOLDER

Просмотров 1,2 млн

A FANCY Lathe Tool Height Gauge || INHERITANCE MACHINING

22:20

A FANCY Lathe Tool Height Gauge || INHERITANCE MACHINING

Просмотров 461 тыс.

ЭТО РЕАЛЬНАЯ ИГРА ПРО ПАРКУР! 🤪 #паркур #сальто #скита #pkfr

00:14

ЭТО РЕАЛЬНАЯ ИГРА ПРО ПАРКУР! 🤪 #паркур #сальто #скита #pkfr

Просмотров 23 тыс.

Новый облик. Bentley Continental GT за 700.000 рублей.

23:08

Новый облик. Bentley Continental GT за 700.000 рублей.

Просмотров 284 тыс.

❌Не пускают в тц с животными. В чем проблема, не пойму!?!? #pov #story

00:48

❌Не пускают в тц с животными. В чем проблема, не пойму!?!? #pov #story

Просмотров 342 тыс.

❌Реальная причина расставания Гуфи и Ким. Девочки, признавайтесь, часто заказываете с вб? #pov

00:41

❌Реальная причина расставания Гуфи и Ким. Девочки, признавайтесь, часто заказываете с вб? #pov

Просмотров 286 тыс.

Using Charcoal, Salt & Iron To Make Files, Reamers & Saws

27:57

Using Charcoal, Salt & Iron To Make Files, Reamers & Saws

Просмотров 172 тыс.

Making a PRECISION Machinist Jack || INHERITANCE MACHINING

21:02

Making a PRECISION Machinist Jack || INHERITANCE MACHINING

Просмотров 1 млн

Making Spindles for a RACE CAR! || INHERITANCE MACHINING

22:00

Making Spindles for a RACE CAR! || INHERITANCE MACHINING

Просмотров 454 тыс.

Getting the BEST Precision Lathe for FREE

21:02

Getting the BEST Precision Lathe for FREE

Просмотров 377 тыс.

Making the PERFECT* Slitting Saw Arbor || INHERITANCE MACHINING

23:24

Making the PERFECT* Slitting Saw Arbor || INHERITANCE MACHINING

Просмотров 646 тыс.

I Bought A Minimill to see if they are Worth It

8:03

I Bought A Minimill to see if they are Worth It

Просмотров 881 тыс.

NASA's clever technique to make combustion chambers

16:19

NASA's clever technique to make combustion chambers

Просмотров 1,3 млн

Rotary Broaching Eccentric Cams || INHERITANCE MACHINING

20:46

Rotary Broaching Eccentric Cams || INHERITANCE MACHINING

Просмотров 484 тыс.

Making a MINIMALIST Wallet || INHERITANCE MACHINING

18:48

Making a MINIMALIST Wallet || INHERITANCE MACHINING

Просмотров 553 тыс.

Making a MASSIVE Fly Cutter || INHERITANCE MACHINING

24:14

Making a MASSIVE Fly Cutter || INHERITANCE MACHINING

Просмотров 887 тыс.

СТОИТ ЛИ БРАТЬ IPHONE 13 В 2024?

13:53

СТОИТ ЛИ БРАТЬ IPHONE 13 В 2024?

Просмотров 23 тыс.

⚠️ КАК ЗАЩИТИТЬ WINDOWS ОТ ВЗЛОМА?! СОВЕТЫ БОРЦА С ХАКЕРАМИ

45:57

⚠️ КАК ЗАЩИТИТЬ WINDOWS ОТ ВЗЛОМА?! СОВЕТЫ БОРЦА С ХАКЕРАМИ

Просмотров 38 тыс.

iPhone 15 Pro vs Samsung s24🤣 #shorts

0:10

iPhone 15 Pro vs Samsung s24🤣 #shorts

Просмотров 10 млн

Samsung galaxy S24ultra titanium green 💚, Display quality 😱 Technology Digital #shorts

0:10

Samsung galaxy S24ultra titanium green 💚, Display quality 😱 Technology Digital #shorts

Просмотров 66 млн

РЕМОНТ ПО ГАРАНТИИ СЕРВЕРНОЙ ПЛАТЫ ASUS P9X79 ЗА ЛАЙКИ! В ЧЕМ БЫЛА ПРОБЛЕМА? КЛИЕНТ РАЗГОНЯЛ ПЛАТУ!?

24:22

РЕМОНТ ПО ГАРАНТИИ СЕРВЕРНОЙ ПЛАТЫ ASUS P9X79 ЗА ЛАЙКИ! В ЧЕМ БЫЛА ПРОБЛЕМА? КЛИЕНТ РАЗГОНЯЛ ПЛАТУ!?

Просмотров 151 тыс.

5 САМОДЕЛОК ИЗ DVD ПЛЕЕРА

10:10

5 САМОДЕЛОК ИЗ DVD ПЛЕЕРА

Просмотров 74 тыс.

Юмор AirPods Max 😃

0:36

Юмор AirPods Max 😃

Просмотров 20 тыс.