Тёмный

Making Springs On The Lathe 

Clickspring Clips
Подписаться 101 тыс.
Просмотров 73 тыс.
50% 1

Taken from "Making a Watchmaker's Faceplate for the Sherline Lathe - Part 3" - • Watchmaking - Making a...
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
Geevorks Spotting Drill Bit, M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Chamfering Tool - 3 4 5 6 8 10 12mm: amzn.to/48KiTO5
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Dialux Metal Polishing Compound White and Grey 4oz 1/4b: amzn.to/3vopCPo
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l

Развлечения

Опубликовано:

 

9 янв 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 169   
@kenharper5755
@kenharper5755 5 месяцев назад
Developed in the 1500’s by the sea monks of Denmark, springs were originally created to bridge the gap between winters and summer
@alexgonzalez2338
@alexgonzalez2338 5 месяцев назад
Today, they are really bouncing back.
@ChristopherBell
@ChristopherBell 5 месяцев назад
@@alexgonzalez2338 These two comments are especially great if you read them together in your head in the voice of Brooks Moore from How it's Made.
@wompastompa3692
@wompastompa3692 5 месяцев назад
@@ChristopherBell You'll probably love This Old Tony's spring video.
@cybersurfer2010
@cybersurfer2010 5 месяцев назад
😂
@bertjetolberg103
@bertjetolberg103 5 месяцев назад
Yeah and sometimes its in the air.....
@123bhays
@123bhays 5 месяцев назад
Ahh yes lapping down to .3 microns for me to just have it slip out of my greasy fingers under the bench and be lost forever! Thanks for the great content. Each step in this I was like “ what else is there even left to do to a spring?” Beautiful work..
@moocowpong1
@moocowpong1 5 месяцев назад
Of course you would polish springs to a mirror finish. Inspiring as always.
@user-oy4lk7fd9w
@user-oy4lk7fd9w 5 месяцев назад
Those are the most beautiful springs I have ever seen
@EleanorPeterson
@EleanorPeterson 5 месяцев назад
Yep. The flat-ground and polished ends are gorgeous.
@lockdownudein
@lockdownudein 5 месяцев назад
I was about to comment EXACTLY the same thing. Lol!
@derekturner3272
@derekturner3272 5 месяцев назад
I've made springs and heating elements on my 42" lathe for years. Never have I made anything that visually attractive. What an awesome demonstration of the craft and precision of a watchmaker.
@JeffreyVCraig
@JeffreyVCraig 5 месяцев назад
Even your springs are fantastic! Great work, Chris!
@tattoosteveneo
@tattoosteveneo 5 месяцев назад
That notch in the wire trick is slick! 👌
@jpdominator
@jpdominator 5 месяцев назад
The most expensive, beautiful, heart and soul filled springs ever created. Everything you produce is incredible.
@Craftlngo
@Craftlngo 5 месяцев назад
I've never seen so shiny springs
@ironhead65
@ironhead65 5 месяцев назад
Chris, thanks! Have you considered making a crank handle that goes in the back of the spindle, where you might put a spider? Something like what Steve Jordan makes for his lathe?
@rickhand8228
@rickhand8228 5 месяцев назад
I have made springs using 1/8" spring wire. I made a few of that diameter with beehive ends and forged a ball on spring wire to work inside the beehive. It was to replace parts that were no longer available for a fire truck.
@KnowArt
@KnowArt 5 месяцев назад
seemingly random question... could you make a spring from a tiny I-beam?
@Eddie.Mootsen
@Eddie.Mootsen 5 месяцев назад
has a special tool for polishing the *inside* of springs, which clearly has been used numerous times before 🤯
@alexgonzalez2338
@alexgonzalez2338 5 месяцев назад
Are these springs clickable ? 😊
@alanclarke4646
@alanclarke4646 5 месяцев назад
See what you did there 😂
@BaconbuttywithCheese
@BaconbuttywithCheese 5 месяцев назад
Like alchemy! Modern materials are wonderful.
@paulnagel8161
@paulnagel8161 5 месяцев назад
Is this a shop tutorial or an art class? Yes.
@CobeinCobein
@CobeinCobein 5 месяцев назад
Been watching your videos for many years and what you do is pure art!
@tonydique4554
@tonydique4554 2 месяца назад
Wow. Awesome. Not a spring, that’s a work of art 😊
@davidgillies620
@davidgillies620 5 месяцев назад
Even the damn springs are black polished. Outstanding.
@DelTurts
@DelTurts 5 месяцев назад
this is the most extra thing i have seen in my life, im amazed at how it just kept going, seems like such a fun little project to tinker with
@billchiasson2019
@billchiasson2019 5 месяцев назад
Impeccable craftsmanship as always!!
@gu4xinim
@gu4xinim 5 месяцев назад
Finally the springs. Do clicks next.
@TheChzoronzon
@TheChzoronzon 5 месяцев назад
That's our job. Same with the Likes.
@guye7763
@guye7763 5 месяцев назад
Great work
@Felenari
@Felenari 5 месяцев назад
Great watch. Thanks for sharing.
@brianrydzeski6108
@brianrydzeski6108 5 месяцев назад
Nice work, Chris.
@JoseSilveira-newhandleforYT
@JoseSilveira-newhandleforYT 5 месяцев назад
Just beautiful!
@albertpolak786
@albertpolak786 5 месяцев назад
Why yes I do polish the insides of my springs, what do you take me for, an animal? Mesmerizing work!
@daveys
@daveys 5 месяцев назад
These videos are beautiful. Well done Chris!
@timbosson7753
@timbosson7753 5 месяцев назад
perfection personified, just love your work !
@chiparooo
@chiparooo 5 месяцев назад
Beautiful work! Thanks for sharing!
@plainnpretty
@plainnpretty 5 месяцев назад
I agree
@deserado11
@deserado11 5 месяцев назад
... if not flat out insane ... certainly psychologically atypical ... (luv it!)
@ChristopherHallett
@ChristopherHallett 5 месяцев назад
Lovely to see your take on this video after watching Quinns a few weeks ago. Interesting to note the similarities and differences between them both and how your personalities shine through!
@TheChzoronzon
@TheChzoronzon 5 месяцев назад
"shine" oh u
@624Dudley
@624Dudley 5 месяцев назад
Thanks Chris 👍
@Peter_Trevor
@Peter_Trevor 5 месяцев назад
If there was an award for the most beautiful hands on RU-vid, Chris would win hands down. Pardon the pun.
@christianbowes7907
@christianbowes7907 5 месяцев назад
Finally a vid of springs!
@davebradford8393
@davebradford8393 5 месяцев назад
As always, you make it look so easy. And you make a work of art while you're at it.
@matthewbaker7513
@matthewbaker7513 5 месяцев назад
I take springs for granted- very cool that you can make them to spec.
@pomeskampfkoch
@pomeskampfkoch 4 месяца назад
Wieder ein tolles Video. Vielen lieben Dank. Macht weiter so 👍
@timgoodliffe
@timgoodliffe 5 месяцев назад
beautiful
@adad-nerari4117
@adad-nerari4117 5 месяцев назад
Perfect as usually
@HSkraekelig
@HSkraekelig 5 месяцев назад
It's not enough to make a perfect spring. No, it has to be a gorgeous perfect spring :) Very nice!
@ButBigger42
@ButBigger42 5 месяцев назад
Been watching this channel for years, just waiting for springs to be made!! About time. Lol. (Dear commenters, I am being facetious, relax)
@ackbar8297
@ackbar8297 5 месяцев назад
Gratz on 100k subscribers!!!
@ClickspringClips
@ClickspringClips 5 месяцев назад
Thank you!
@michedmck
@michedmck 5 месяцев назад
A masterclass, as usual! Excellent, Chris! Missed the narration, though.
@jeffarmstrong1308
@jeffarmstrong1308 5 месяцев назад
If you want the narration go the link in the comments and watch the entire video.
@hyspeed38
@hyspeed38 4 месяца назад
100k subs, congrats!
@davidgibson5756
@davidgibson5756 5 месяцев назад
Beautiful work, although that tail stock center has seen some hard days
@CrinosAD
@CrinosAD 5 месяцев назад
Wow... best springs I've seen made ever! That jig that you used to level the top of the spring, Hand made or something you have bought. Never seen something like it before.
@shoutykat
@shoutykat 5 месяцев назад
I've seen springs made before but never that shiny! I thought it might have been a return spring for the plunger on the dial indicator until you made three of them so now I'm stumped.
@jackfromthe60s
@jackfromthe60s 5 месяцев назад
Thanks!
@ClickspringClips
@ClickspringClips 5 месяцев назад
Cheers mate :)
@jhonbus
@jhonbus 5 месяцев назад
Excellent (of course) but that trick with the file was very nice.
@Joemama555
@Joemama555 5 месяцев назад
finally some more springs on this channel!!!!! (boing!) ;)
@MetalMachineShop
@MetalMachineShop 5 месяцев назад
Lovely job. Would it not be easier to polish the wire first? I guess there would still be some touching up to do afterwards after grinding.
@erikferland6602
@erikferland6602 5 месяцев назад
Fancy sproing!!!
@sbrunner69
@sbrunner69 5 месяцев назад
Great
@vesslewiththepesstle
@vesslewiththepesstle 5 месяцев назад
wow great work, that should get you the extra 700 subs you need.
@EleanorPeterson
@EleanorPeterson 5 месяцев назад
🎵It don't mean a thing If it ain't got that -🤭
@bluebalute
@bluebalute 5 месяцев назад
Click?
@624Dudley
@624Dudley 5 месяцев назад
Dayum, I wish I’d thought of that!! 👍👍
@gcerchio
@gcerchio 5 месяцев назад
Perfection! Certainly puts my 3d printed arbor and piano wire wrapping tool to shame :)
@huntz3215
@huntz3215 5 месяцев назад
Made 1 with 3mt of 6mm rod - scary stuff thinking 'I hope my clamps hold' as I was bending it around. Needed spring for my thumbnail project. Nice detail on your springs.
@Pyrografpl
@Pyrografpl 5 месяцев назад
Wow ❤
@danielcervantes4688
@danielcervantes4688 5 месяцев назад
Congratulations on a wonderfull job. A question: how do you protect your springs from corrosion?
@r1273m
@r1273m 5 месяцев назад
I only wanted a replacement for the one I lost out of my Biro!
@timmontano8792
@timmontano8792 5 месяцев назад
Great Idea. I've been doing it the hard way all this time. Same results, just that twisting that wire by hand was tedious. Can you tell me if you've figured out a formula for getting the needed outside diameter of the spring by utilizing an exactly sized inside diameter post onto which you wind your wire? I could always end up getting my springs to come out "Good-Enough" for my needs but, I would like to have figured out some formula to get the outside diameters of my finished springs exactly where I needed them to be.
@darkodragojevic9554
@darkodragojevic9554 5 месяцев назад
TOP!!!!
@tomresink7189
@tomresink7189 5 месяцев назад
very nice😊! what is your reason to first high polish them and than sand the edges afterwards?
@r1marine670
@r1marine670 5 месяцев назад
Nice to see you again Chris, but why no heat treat or did you just not show it here?
@boltonky
@boltonky 5 месяцев назад
Never thought of doing them this way. So awesome work there :) Guess my question would be what calculations did you use to make sure it was right tension/length cause not all springs are the same, most i get made i have an actual spring place make them so it can be tested/made to correct spec
@user-ve5ei2xe8h
@user-ve5ei2xe8h 5 месяцев назад
Doesn't the sproing need heat treatment, or is it already hardened to the correct sproingyness before winding?
@Masononi
@Masononi 5 месяцев назад
It's music wire, it's treated spring steel :) that's why it bounces back so much after winding
@dwdidit3664
@dwdidit3664 5 месяцев назад
Not gonna lie: my heart skipped a beat watching you polish the interior. I could just imagine the mandrel catching on the end of the spring and screwing it into the hand holding holding it.
@jonmccormick6805
@jonmccormick6805 5 месяцев назад
Oh, so that’s how uncle This Old did it!
@kanionargentina4157
@kanionargentina4157 5 месяцев назад
Mr. click spring, doesn't that spring have heat treatment? Thanks!
@taitano12
@taitano12 5 месяцев назад
😂😂😂 When you put it in the Finger Clamp I thought 🤨 "Wait... Is he putting that in the MILL?? Talk about overkill... Ah. Nevermind." 😅
@Froobyone
@Froobyone 5 месяцев назад
I never thought I'd see sexy springs, but I've seen sexy springs.
@mr.b2232
@mr.b2232 5 месяцев назад
👍
@hippynurd
@hippynurd 5 месяцев назад
Would it be easier and better to polish the wire before bending?
@TheChzoronzon
@TheChzoronzon 5 месяцев назад
Polishing should always be the last step, if you want an impeccable finish
@kahlzun
@kahlzun 5 месяцев назад
Is there any practical reason to buff the springs or is it just aesthetic?
@ClickspringClips
@ClickspringClips 5 месяцев назад
It makes the interaction with other parts feel slick and minimises corrosion - Cheers :)
@larrybud
@larrybud 5 месяцев назад
The mighty spring. It pushes, or it pulls, but how do it know?
@MsBrouzouf
@MsBrouzouf 5 месяцев назад
Does it clicks ?
@pjhalchemy
@pjhalchemy 5 месяцев назад
Design and Build Notes: 1. Build precision arbor so start wire perfectly fits under the shoulder of the cap screw head...with a ~thou overhang and the partial trough for the wire based on wire radius. 2. The diameter of the shaft has to be so many thou under the spring-back of the spring material to get the proper OD/ID final dimension. 3. The wire feed tube precision drilled and counter-bored to allow wobble from the spool. 4. Carriage mounting w/precision height set and feed rates engaged/disengaged for flats and spirals to determine overall length prior to flat grinding. 5. Grinding arbor precision turned to LN/LT fits of spring. 6. Grinding and polishing entire spring ID/OD to .3µ or 1.1811e-5"...Just forget about removing all burrs and sharp edges and get to work. ;-P Thanks Chris, Hope Santa was as Good to you as you are to us!
@ClickspringClips
@ClickspringClips 5 месяцев назад
Thank you mate!
@pickerjim9246
@pickerjim9246 5 месяцев назад
Of course it’s a perfect spring.
@mattelias721
@mattelias721 5 месяцев назад
How do you determine the final inside/outside diameter of the spring given the quasi-random amount of springback inherent in the steel wire? I know there's probably tables and stuff to approximate it, but every batch is different, etc., so is this magic just trial and error?
@brocktechnology
@brocktechnology 5 месяцев назад
The spring back is actually well understood. The diameter of a spring changes under load ,meaning that they can't be made to high tolerance anyway so the tables are always gonna get ya right where you need to be.
@ianmarr346
@ianmarr346 5 месяцев назад
Machinery handbook has arbor sizes for piano wire👍🏻
@cfusername
@cfusername 5 месяцев назад
I always thought that these get a heat treatment after forming to make them keep their shape.
@davidsmart8594
@davidsmart8594 5 месяцев назад
Chris, is the spring wire being fed through the brass guide under tension or is it just ‘loose’ ?
@stevebabiak6997
@stevebabiak6997 5 месяцев назад
Almost certainly there is some tension. You see when it was cut off, the spring changed diameter - tension was keeping it close to the arbor / mandrel.
@Miro080808
@Miro080808 5 месяцев назад
Next please make some clicks on lathe
@justindewoody
@justindewoody 5 месяцев назад
Even his springs look like jewelry!
@crashwelder5337
@crashwelder5337 5 месяцев назад
You did not heat treat the springs? I cannot believe you bent Spring Steel that easily around your mandrel. So how well do those Springs work, or do they work? What type of Steel did you use? Beautiful workmanship and technique as always Chris but I'm a bit confused
@TheChzoronzon
@TheChzoronzon 5 месяцев назад
That's why he's using a lever, to turn the chuck, instead of the bare hands
@GopniG123
@GopniG123 5 месяцев назад
It's a youtube video. Ofcourse you can't bend spring steel so easly, even if it not heat treat. And without heat treat after you bend it (if you bend it) it wont work. No wonder he not sqeze it on camera.
@SvenEugenots
@SvenEugenots 5 месяцев назад
Is it ok if I don't mirror polish my springs? 😁
@JohnJones-cp4wh
@JohnJones-cp4wh 5 месяцев назад
Heat treatment ?
@bng2679
@bng2679 5 месяцев назад
How do you know it would make your desire spring rate?
@tombradscott
@tombradscott 5 месяцев назад
I too polish my springs....
@xfxox
@xfxox 5 месяцев назад
It's there a way to make a spring so curved a toothpick won't pass through it's axis?
@rustysteed8414
@rustysteed8414 5 месяцев назад
Indeed there is. Many years ago I worked on IBM Executive type bar typewriters which had pawl springs that were about 1/16" ID and 3/8" long, and were a real pain to replace.
@nerddub
@nerddub 5 месяцев назад
yes look at the spring that holds the flint in most lighters, much smaller ID, and theoretically possible to make a spring of any ID
@ironnerd8336
@ironnerd8336 5 месяцев назад
Every prepper is gathering food, water, guns, and ammo; which ones are preparing for the loss of availability of springs? Where will you go when the springs run out? Seriously, that was beautiful. I've seen springs made on How It's Made but never slowed down, and on a small scale. I would put one of those springs on my keyring and cherish the craft.
@cest7343
@cest7343 5 месяцев назад
I don't think spring as polished as those are street legal in Norway?
@JoseJimeniz
@JoseJimeniz 5 месяцев назад
Don't they have to be heat treated? Won't the steel deform and fail?
@szymonjastrzebski2909
@szymonjastrzebski2909 5 месяцев назад
Hey, out of curiosity, shouldn't these springs get heat treatment after the winding? When I was in a spring factory they told us that after winding the screws go to a furnace where they get basically tempered, otherwise they would quickly deteriorate.
@ClickspringClips
@ClickspringClips 5 месяцев назад
Source stock is pre-tempered music wire so a temper cycle would certainly relieve any residual stresses. However use case here is light service, low range, compression only so I judge it not necessary - If use case were average or severe service/high range/dynamic load etc, different story- Cheers :)
@szymonjastrzebski2909
@szymonjastrzebski2909 5 месяцев назад
@@ClickspringClips i see, thank you! Great video, love your content.
@littlehills739
@littlehills739 5 месяцев назад
think you polish the swaff from lathe too unless you be seen dumping rusty off cuts 🤣😁
@markgoogasian9004
@markgoogasian9004 5 месяцев назад
The usual production process for springs is the anneal after the forming process to counter the work hardening and resultant stresses induced during that phase. Why wouldn't you do that here?
@TheChzoronzon
@TheChzoronzon 5 месяцев назад
That's for big springs. In no moment of the forming of these small springs the metal has gotten hot, nor has been subjected to big mechanical forces... so no work hardening. Metal alloys used in springs are specially formulated, and heat treated, to not harden during forming...at least in springs of this size
@adrianrevill7686
@adrianrevill7686 5 месяцев назад
Perfect springs but with a major flaw, they did not click.
@alaindecapod8381
@alaindecapod8381 5 месяцев назад
bonjour votre façon de faire un ressort et bien mais il faut le mettre dans un four a 320 degré pour le stabilisée si non il va perdre sont élasticité rapidement
@adhamatta
@adhamatta 5 месяцев назад
"How you do anything is how you do everything." That dude in john wick was right.
@pirateskeleton7828
@pirateskeleton7828 5 месяцев назад
Do you do any math to figure out what angles, turn counts, and diameter will give you the desired spring coefficient?
@ClickspringClips
@ClickspringClips 5 месяцев назад
Yes, there is a comprehensive section in Machinery's Handbook covering all of the design, math etc - Cheers :)
Далее
Making Your Own Springs On The Lathe!
19:32
Просмотров 301 тыс.
The courier saved the children
00:33
Просмотров 1,3 млн
Making A Domed Contact Point
4:53
Просмотров 59 тыс.
Using A Fixture On The Lathe
6:19
Просмотров 29 тыс.
Manually Milling an Ellipse.....Say What ??
35:20
Просмотров 45 тыс.
I need a PRECISION straight-edge, so I made three
12:29
Making Lifting Screws On The Lathe
4:17
Просмотров 30 тыс.
Каха ограбил банк
1:00
Просмотров 7 млн
ЭКСПРЕСС разбор стиралки
0:39
Просмотров 1,3 млн
ЗЕМЛЯ БЛИЗКО
0:17
Просмотров 1,8 млн