Clockmaking - [BONUS VIDEO] Chill Out Edit - 1000 Hours in 12 Minutes

Подписаться 661 тыс.

Просмотров 1,2 млн

50% 1

Chill Out Edit - 1000 Hours in 12 Minutes, by Clickspring
All footage sourced from the long term project "How To make a Clock In The Home Machine Shop":
Part 1 - Making The Frames • Clockmaking - How To M...
Part 2 - Machining The Pillars • Clockmaking - How To M...
Part 3 - The Washers And Screws • Clockmaking - How To M...
Part 4 - Cutting The Wheels • Clockmaking - How To M...
Part 5 - Cutting The Pinions • Clockmaking - How To M...
Part 6 - Crossing Out The Wheels • Clockmaking - How To M...
Part 7 - Making The Barrel • Clockmaking - How To M...
Part 8 - Making The Barrel Arbor • Clockmaking - How To M...
Part 9 - Chapter Ring • Clockmaking - How To M...
Part 10 - Bezel • Clockmaking - How To M...
Part 11 - Bezel Screws • Clockmaking - How To M...
Part 12 - Collets And Other Arbors • Clockmaking - How To M...
Part 13 - Planting The Train • Clockmaking - How To M...
Part 14 - Barrel Click And Clickspring • Clockmaking - How To M...
Part 15 - The Dial Assembly • Clockmaking - How To M...
Part 16 - The Motion Work And Hands • Clockmaking - How To M...
Part 17 - Regulator & Suspension Post • Clockmaking - How To M...
Part 18 - The Pendulum • Clockmaking - How To M...
Part 19 - Making The Legs And Base • Clockmaking - How To M...
Part 20 - The Crutch Assembly • Clockmaking - How To M...
Part 21 - Mainspring And Escapement • Clockmaking - How To M...
Part 22 - The Stopwork Mechanism • Clockmaking - How To M...
Part 23 - The Key, Polishing & Assembly • Clockmaking - How To M...
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: / clickspring
________________________________________________________
A very special thank you to Patrons Dan Keen, Samuel Irons, Sean Kuyper and Mark Kobey
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": amzn.to/2FObS1D
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): amzn.to/2HGPaJJ
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Loctite 231097 603 Retaining Compound, 10 mL: amzn.to/2pid6vR
Interapid Dial Test Indicator: amzn.to/2FPInwH
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Digital Calipers: amzn.to/2IkFh4O
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Anytime Tools 5 Lathe Mill CENTER DRILL : amzn.to/2IThppO
Sherline Lathe: amzn.to/2pnXM19
Hegner Scroll Saw: amzn.to/2IhteVW
Sherline CNC Rotary Table Indexer: amzn.to/2FJXmfv
Heavy Duty Arbor Press: amzn.to/2G4gog7
Ask Me A Question:
www.clickspringprojects.com/co...
Chill Out Edit - 1000 Hours in 12 Minutes, by Clickspring

Видеоклипы

Опубликовано:

13 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@drewh0208 7 лет назад

I wish that more people could understand and appreciate the sheer quantity and quality of effort, practice, and concentration that went into making all of this.

@Clickspring 7 лет назад

Thank you Drew, very kind of you :)

@jonharson 6 лет назад

Rumour has it that Switzerland put a price on his head.

@glenralph5123 6 лет назад

Almost wet myself. Best comment ever!

@klownskull702 4 года назад

You mean Japan?

@alexbohatch3503 4 года назад

RU-vid Smart same difference

@kurumi394 4 года назад

@@klownskull702 Japan specialises in Quartz movement clocks. For mechanical clocks you need to look for them in Switzerland.

@klownskull702 4 года назад

@@kurumi394 thank you I didn't know the difference. I just know they make watches.

@IanCaine4728 4 года назад

I love how after ALL that, the lingering shot on the finished piece is about 10 seconds. All about the process.

@theCodyReeder 7 лет назад

So impressive! maybe I'm going to need to talk you into machining some parts for me.

@jakobnev5973 7 лет назад

No, he's not going to make a clock out of Sodium for you Cody.

@andregross7420 7 лет назад

Hey Cody

@Aperson-sv2hc 7 лет назад

A clock out of sodium? lol...

@SouthernMechanic 7 лет назад

didnt expect to see you here cody, i will be looking for your latest video

@nedshead5906 7 лет назад

how about a Sodium diving watch...?

@matlarr13579 7 лет назад

Best channel on RU-vid, your video quality is just outstanding

@thehollows 7 лет назад

Agreed!

@rileyalexander5372 7 лет назад

matlarr13579 totally agree. every time a video has been posted I've stopped doing what I'm doing to watch it. can't wait for the next project he does

@PixelSchnitzel 7 лет назад

Without a doubt. Video production quality and craftsmanship -- both head & shoulders above all others.

@sithompson74 7 лет назад

Pixel Schnitzel couldn't agree more. Everything from the camera work, editing and voice over to the total incredible, master, craftsmanship has been an absolute joy

@Cyruscosmo 7 лет назад

I second that, The video, sound and voice over quality is superb! You should to make at least one video on how to make videos!

@hadrienberthet2575 7 лет назад

RU-vid awards of the most beautiful creation, winner: ClickSpring!

@shawnlund 7 лет назад

Not many people can say they accomplished something so beautiful and technical with so much dedication and skill.

@Rubbernecker 4 года назад

Damn. I hope you sold that for $75k. Absolutely stunning.

@Masocisa 7 лет назад

Well then... The best series on RU-vid has come to an end, can't wait for the next one

@zanpekosak2383 7 лет назад

Masocisa7538 The antyhtera is kinda boring.

@bucky13 7 лет назад

Well time to watch this entire series again.

@banzaiib 4 года назад

You could do a 12 minute video of that clock just running with the camera slowly moving around it and you'd get 100k viewers...

@3ATIVE 4 года назад

Well, where to start... I found your channel after seeing the Card Press you made. After binge watching 'The Antikythera Mechanism', I followed with this Clock build playlist. I was blown away at every stage. Your skill, knowledge and talent are breath-taking. Every single component you've made here is a true work of art in its own right... you must be so proud. On top of that, the presentation style, editing and sound effects do so enhance the production. - Thank you for sharing and may you continue to produce such masterpieces.

@AcrimoniousMirth 7 лет назад

Sooo our entire family sat and watched that while sipping tea. Our next challenge: set up a live feed of the clock against a nice background. Also, my mum wants to know what your kitchen is like! She thinks your knives will be immaculately sharpened and everything neatly laid out.

@i3lack0ut 7 лет назад

You should do a close up video on how exactly the clock works. I feel like we haven't been able to enjoy the finished project enough

@robertnicholson7733 Год назад

Every once and a while I just sit back and watch this video. I can relax while mesmerized by all that gleaming brass and blued steel. But also the planning, the technique, the clarity of purpose - no stoke out of place, each tool exactly what is required for the task - even if it has to be made, and each tool in perfect order - each file clean and keen. And at the end, a beautiful example of workmanship in a wonderfully clean workshop. The only problem, it is Chris in the video and not me. 😀

@sergioricardopereira 7 лет назад

Sorry to all others machinists in youtube, but this project is the most beautiful thing made in a lathe/mill I ever see... Keep those videos coming... and thanks to show us this project... Regards from Portugal

@5RustyBin 4 года назад

Quite possibly one of the most beautiful things I ever set eyes on. Stunning.

@dhs186 7 лет назад

I cried a little bit after watching this...in awe of the craftsmanship, the dedication, the math and engineering...its like...well...a mini version of God to me - an aspiration to be the best at what you were put on this earth to achieve. I can't wait to watch more. Keep up the amazing work!

@Clickspring 7 лет назад

Terrific to have your support David, some new material out soon :)

@orchardwatchandclockrepair8346 3 года назад

Fantastic remarks. Totally agree

@aeviwright7846 5 лет назад

I'm no appraiser but with the amount of work and attention to detail on top of hand making every piece id say that beauty is worth at a minimum 20,000$. This work is on par with the works of master clock and watch makers around the world and could easily get showcased at baselworld with the other non-watch pieces in the art section.

@gordon6029 2 года назад

Thanks for this video. You know, my wife knits. She knits amazing things. People keep telling her to knit for profit. They just don’t get it. She would have to charge $1000 a sweater just to make minimum wage. This clock is amazing, I would love to build one. Would be so cool if you could support yourself making these beautiful creations but I just don’t think it is possible in this day and age. Again, waiting for a video going through the tools you have.

@leocelente 7 лет назад

we need a 1 hour long video of it running

@AnthHalliday 7 лет назад

I was thinking exactly that.

@intjonmiller 7 лет назад

Leonardo Celente 12 hours, so we can put it on an indefinite loop. I would set up a dedicated tablet to show it 24 hours a day in my home. Closest I'll ever get to owning a bit of craftsmanship this incredible. :)

@MegaMetinMetin 7 лет назад

Leonardo Celente donate sone money before you think u call the shots

@intjonmiller 7 лет назад

MegaMetinMetin He didn't say he called the shots. Nothing even remotely like that. Get a grip.

@pseudosam2458 7 лет назад

Yeah I really want to see it running for more than a few seconds.

@Splattertube 4 года назад

Revisiting this (again) after the card press video. Fantastic and mesmerizing. Lovely work, Chris.

@mk1cortinatony395 3 года назад

me too! awesome stuff.

@taba1950 7 лет назад

if I ever have enough money I will build a workshop to build my own clock, just because of you. thank you sir

@INTERVENTIONplayer99 7 лет назад

I dont even give a fuck about clocks are this kind of craftsmanship but my god was it satisfying to watch and i enjoyed every second

@VikasVJois 3 года назад

Your finished parts look so flawless that they look like 3D renders!

@GregsGarage 7 лет назад

I enjoyed every minute of the build Chris. Thanks again for sharing it with us in the way that you did.

@williamsquires3070 7 лет назад

Love it - there's nothing quite like quality workmanship and taking pride in.a job well done. Something I see less and less of as companies ship their manufacturing out to China and Taiwan, and all we get for it is cheap throw-away junk, and fewer jobs.

@LostInThe0zone Год назад

Your craftsmanship is phenomenal. It is difficult for me to believe that you could find the clients who could afford to pay what would be required for you to continue this meticulous work and be paid what it's value is.

@jasonweiss2773 7 лет назад

Chris, I'm going to echo some of my previous statements as well as other commenters. Your craftsmanship is only equaled by the exceptional production value of your videos. You are talented in so many facets it boggles the mind. Your channel is far and away the MOST polished on RU-vid. I wish I was someone with Hollywood clout to give you a DIY style show of your own. That would be bittersweet however, as they would likely ruin it. I guess the best compliment I can give (and you're deserving of so many) is that your videos are a comfort to me in an otherwise temultous world. A very sincere thank you from your pal in Colorado. Jason

@davidbalentine2110 3 года назад

Yes. Well stated. In a world of instability, this work is a comfort. Chris is impressive. Thank you Chris.

@sammeyerson1577 5 лет назад

your work is absolutely tremendous and a joy to watch. Not only does your craftsmanship and research go above and beyond but your skill to film and document to make the process look effortless is truly amazing

@desromic 7 лет назад

I've been following the entire series. You deserve an award for filmmaking, truly.

@GeneralSeptem 7 лет назад

I find it amazing that your videography and editing style has been not only good but so consistent over the entire project. Most other youtubers I see "evolve" over the years, but the first and last videos of this project truly look like they belong to the same series.

@BigLarge127 5 лет назад

The level of craftsmanship here has literally left me speechless; it is far and above what I thought was possible.

@whynotdean8966 4 года назад

CAN YOU NOT dude. Making the rest of us plebeians look like fumbling toddlers in the shop.

@Ryan_Atomic 4 года назад

but why NOT dean

@BuildYourOwnWatch 5 лет назад

The quality of craftsmanship is obvious in this amazing production. The clock is a work of art that I watched the 3 seconds or so you show it working for about ten minutes. Beautiful creation!

@KOakaKO 7 лет назад

It's been very entertaining to see the extreme amount of handwork involved in the creation of your unique and beautiful creation. After the amount of time that was devoted to this project, all I can say is - thank goodness you didn't decide to mine and smelt the copper and zinc ores to make the brass in the first place. ;)

@redline870 5 лет назад

I was just referred here from Adam Savage. Your quality of work, attention to detail, and level of precision is truly remarkable! I cant believe how awesome that was. Everything down to the smallest detail was perfectly made, and meticulously assembled. Unreal! I bet you'd make one sweet 1911!

@GregVirgoe 6 лет назад

Oh mate, your shop is cleaner than a hospital theatre! Totally in awe of your craftsmanship and the end result is spectacular. One of the very best channels on RU-vid, Thank you so much.

@Clickspring 6 лет назад

Cheers Greg, terrific to have you watching mate :)

@bendingsands87 5 лет назад

I've never seen anything handmade as beautiful as that. Thank you.

@billbright1755 4 года назад

Like clock work. A chronological masterpiece.

@Xenro66 2 года назад

This just got re-recommended to me after 5 years, wowee the nostalgia is strong on this. I remember watching each of the "how to make a clock" videos, patiently waiting for the next. Even after so long, I am still just blown away at the sheer level of craftsmanship and care that was put into this clock. It is so well made, with such high precision and... It's just brilliant in every way. Just to think that (excluding the material/consumable costs), the price for this clock if calculated with minimum wage here in Ireland would be close to *€11,000,* since it's entirely hand made. I hope you still have this clock, because this is something that should be cherished and passed down as a family heirloom.

@TwistedEngines 4 года назад

No clue how I ended up on this video. But DAM... I'm hooked

@FCNFAST 4 года назад

Clickspring hands down has the best videos on youtube..

@ramonbril 7 лет назад

I am just perplexed: what a person is behind such brilliant video quality and these skills of beautiful craftmanship. The perfectionist's ultimate form.

@jacekgospodarczyk4384 Год назад

Chris, as usual, the art of perfection, both in technique and in making the films

@mannycalavera121 7 лет назад

Your video quality is as brilliant as your craftmanship.

@johnsumner2987 7 лет назад

You sir are aren't just a machinist or a clock maker, you are an Artist.

@Gilvin 7 лет назад

I followed every episode of this clock making. Really touched about the dedication and the professions.

@johnwild310 7 лет назад

Perfect. First thing of yours I have seen. So many "secrets" in just 12 minutes! The BEST part is this is an index to the project videos!!!

@spaminbox 4 года назад

the desire for a 12 hour video of the clock running is still strong after 3 years.

@johnnydeerfist3727 4 года назад

papers please

@torala Год назад

Just watched the whole series in one sitting. Really fascinating. Thank you!

@matthasaname 7 лет назад

Chris, you need to be doing paid speaking gigs at Maker Fairs. This clock and all the tooling you made to make it are automatic credentials that no one can dispute. Adam Savage should be doing energetic intros for you on stages in front of thousands of people. I love your work, and your heart for educating. Thank you.

@Hutch5321 7 лет назад

Don't know how you'll top this, Chris, but I'll sure be sticking around to find out! Bravo, Clickspring!

@samaker4 7 лет назад

The level of Awesomeness of this project can not be overstated! Thanks Chris, looking forward to the next project.

@balajigg74 4 года назад

Pure artistry with metal.

@YoHeroZero 7 лет назад

You are an extraordinary human being, sir.

@andrewdask 7 лет назад

Hey Chris, Another awesome video. Sometimes when i looked them, the parts were really zoomed in and they looked huge, but then you showed them in your hand or in other place, and realized how minimal they actually are. More than craftsmanship this is really art. Love your job, this kind on thing inspires me to do a better job as a fabricator every day, and makes me want to learn something new whenever i can. Keep the good work coming greetings from Venezuela!

@cammelspit 7 лет назад

Anyone else up for a ten hour video of the clock ticking? I mean, just the clock and nothing else running for ten hours. Beautiful work, really.

@sergeherbstvonmeyer4756 3 года назад

patient, meticulous, precise... love of precision mechanics... and the result is a pure wonder

@daniellclary 2 года назад

Oh that is so amazing to watch every beautiful piece get crafted. If I was not so afraid of wasting materiel, I would do stuff like that too.

@smellofmetal 5 лет назад

1:56 - the most satisfying second of video on all of youtube.

@jasperkilford7539 7 лет назад

Man, this is a really wonderful selection of great things - relaxing music, thoughtful camera work and astonishing machining. You really are a renaissance man! I've watched every episode with absolute awe, and enormous respect. You are, without doubt, the most thorough, thoughtful and practical creator I've seen in a long time. And to top it off, you seem like such a humble guy! Hands down the best Content Creator on RU-vid, in my opinion. If I had to look back at 2016, following along on this journey with you has been one of the most rewarding and memorable aspects of the year. Huge props, seriously. Thank you.

@donaldwycoff4154 3 года назад

A work of art video about the making of a work of art. Amazing.

@Only1Orinthal 7 лет назад

Before I knew what ASMR was. I used to watch each of these to fall asleep to. Very calming to watch and listen to.

@moehoward01 7 лет назад

A work of Art, Chris. Thanks.

@IgorRebenko 7 лет назад

There's only one word that can describe the feeling of watching your videos, and that's 'Euphoria'.

@BauerPauer 7 лет назад

What a beauty. Absolutely invaluable.

@philhodgson4752 4 года назад

Incredible craftsmanship.

@phucuc1864 4 года назад

I'm 22 years old in Vietnam, I'm also studying mechanics and love making, I love the way watches work and the way you make them, great, if you were in my country, maybe mechanical engineering specialist,

@timopheliac18 4 года назад

cọng cỏ you are studying love making?.......I suppose we all are, really, aren’t we.

@eddiebernays514 7 лет назад

I can't believe I have watched this being created for the past year or so. sad to see it end. now I am anxious to see SV Seekers boat be completed.

@smokeyrobinson4918 5 лет назад

Deeply impressive craftsmanship....

@deankirby5966 7 лет назад

I can't imagine how difficult it must have been to condense your videos into 12min. Great job...as usual.

@mannabarbhuiya1 7 лет назад

I don't knw where from you are but I must confess as you are a legend in the field of metal craftsmanship and engineering . A big salute from India.

@urosbozanic 7 лет назад

I've watched all the process of making this clock, and I was astonished by how much work you've put into making this masterpiece! Thank you for creating this beautiful piece of art, I hope that you will bring us more of what you do! Wish you all the best, your new fan!

@Clickspring 7 лет назад

Great to have you watching mate :)

@josephtaylor6285 3 года назад

I cheated and sped ahead to see the final product. What lovely restraint. So beautiful

@mxcollin95 7 лет назад

Like the background music...sounds like 'Sublime' without words. Reminded be of high school summer breaks from back in the day 😎🤘🏻

@leocelente 7 лет назад

I can't get enough of this project. I think the only way I'd close to satisfied is if you live streamed it running forever.

@kwakmad91 7 лет назад

I wish my eyes were as good as your camera

@user-ff1hn7ve9e 7 месяцев назад

The pleasure I get from watching this must be tenfold in the pleasure you get from making the machine. I like to build cars. I really enjoy the task of making parts for my car that nobody else has done. I don't make videos . Thank you for this. It is very enjoyable and it also "resets" my mind to see such perfection in your work. Thank you.

@justinbrat Год назад

Wow satisfaction overload. Is this level of craftsmanship, knowledge and intelligence, patience and humility self made or God given??

@AngelLuisTrinidad 7 лет назад

Amazing beautiful. This is true excellence.

@SargeRho 7 лет назад

Your clock building series is by far one of my favorite series on youtube. I'm looking forward to your next project! :D

@craigdougan8484 6 лет назад

The dedication and quality of workmanship on display here is matched only by the professional quality video production. Thx

@RadomKidsareme000 3 года назад

easily worth $250,000. superb craftsmanship.

@ZachHixsonTutorials 7 лет назад

I've seen your videos a few times, but it was usually just somewhat simple things, like the firestarter or the etching needle thing. this is incredible work! Seriously, the craftsmanship alone is amazing, but add to that the fact that your not a regular clockmaker, meaning you had to do everything by had is just astounding.

@LazerLord10 7 лет назад

Wow just wow that was amazing

@aslan_501 7 лет назад

LazerLord10 Hey saw those awsome minecraft time lapses you did it was really cool and I just looked at your chanel. Gonna have to check out some of your other vids

@LazerLord10 7 лет назад

lol, cool. Not too much new, thought.

@thehollowbox 7 лет назад

I dont know why but for a while I stoped watching your stuff. But watching this reminded me how gorgeous your work is. Your pieces are works of art and I hope one day I can make somthing half as beautiful.

@fkingride.5500 3 года назад

this guy was given all of humanitys patience ! bravo!

@ScrapwoodCity 7 лет назад

It was an awesome project! Any hint of what's on your maker's list next?

@roerich_6426 7 лет назад

Wow, a King of mechanical construction... I lay on the knees on the floor. Wow, what a potential...

@stingable 6 лет назад

Hello Chris , Where are you these days , Your Works are the finest works so far , great going

@jaakdejonckheere3791 5 лет назад

The KING of You Tube.

@ryPish 7 лет назад

Whatever you make next needs to have 10 times the number of part, at least... I don't want it to end so quickly :o

@EliteSniperTV 7 лет назад

Ry P lmao

@TitoRigatoni 7 лет назад

Two years flew by like it was nothing

@EleanorPeterson 4 года назад

The best part of this is the bit that goes from just before the start through to the bit when it stops.

@gerritvisser 7 лет назад

I can't think of anyone better qualified to build this device. Can't wait to learn even more from you. Inspiring!!!!

@roneckler9937 Год назад

Absolutely gorgeous! People can only dream of making something like that!

@carmelpatrik 7 лет назад

waited for every video ! now its done

@feefeee 7 лет назад

Perfect. I always relax before bed with your videos, you made it a bit easier for me :)

@AndWhat11 7 лет назад

i love all the clock videos. i have turned a few pieces of wood with my grandpa in his days and the videos do not do justice of how many hours it took to complete this. Filing each piece alone took a fourth of the thousand hours not to mention all the pieces you had to re-turn. thank you for your hard dedication.

@Clickspring 7 лет назад

Appreciate you taking the time to tune in :)