Making The Bibbster Doors Removable - Foxbody Hot Rod Build

Подписаться 319 тыс.

Просмотров 56 тыс.

50% 1

On this episode I work on modifying the hinges on the mustang doors in an effort to make them removable. This is done all the time on drag racing cars including Mustangs in the drag racing world but I haven't really see it done on hot rod builds... so I figured I would incorporate it into my foxbody build.
The Tools I Use - www.amazon.com/shop/thefabforums
As an Amazon Associate I earn from qualifying purchases
Check out my playlist to see some or all of my builds.
My Clothing Company - www.killfab.com
You can always find me here:
Facebook: thefabforums
Instagram: @thefabforums
Twitter: @thefabforums
SnapChat Username: vossperformance
What I Use To Film:
Canon G7x - amzn.to/2kAWnTe
Canon 70d w/ 18-55 STM Lens - amzn.to/2kak7gr
Canon 6d mark ii - amzn.to/2GGrDrj
Canon 10-18 STM Lens - amzn.to/2kagirC
Camera Gimbal - amzn.to/2KOj28x
Rode VideoMic Pro - amzn.to/2kaebnE
SunPak Tripod - amzn.to/2kB4aR2
Camera Slider - amzn.to/2k4bKR3
Pinnacle Studio Ultimate - amzn.to/2jGwORu
Fluid Head Tripod - amzn.to/2kxoAdM
Camera Lights - amzn.to/2l5uShF
As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

1 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@duanebennett2961 3 года назад

Call Dave Kindig, he sells the recessed door handles

@n20cpri 3 года назад

Man they are expensive though! Whew.

@ryanhines719 3 года назад

Was gonna say the same

@n20cpri 3 года назад

Yeah he'd be better off making a slim style handle to work with the stock fox body handle guts and inner workings...

@Chris-Devine 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rGkd_hB-nKQ.html

@russelllove8533 3 года назад

Ryan Hines corvette club

@benmitchell2642 3 года назад

I like the removable doors. The only way I think you could improve is by adding a brass or teflon washer to the pins just so the door hinges don’t wear out or squeak overtime 👍🏽

@codysmith5970 3 года назад

Late 80's wrangler door handles would look really cool and would match the theme of the car.

@jeepsaround 3 года назад

Kyle could make another hinge pin on the top part of the inner hinges and use a hook on top of the outer hinges. I believe a hook will still allow the door to be installed and removed while keeping his current design, only adding more security. Those added hooks/pins would make the hinges stronger. The hook could cam as the door closes removing more play, if there may be any. It might help the hinges last longer, as well as would the other recommended brass sleeves.

@TrojanHorse1959 3 года назад

Great video, progress, and work, thanks, Kyle!

@scottmiller8010 3 года назад

Doors work great im building a 70’ maverick. That door idea is now on my list. Good job brother

@ronmiller1162 3 года назад

so refreshing to listen and watch a man do his work without any antics to try and pump up his channel , the door handle issue my opinion is research some other factory handle like one of the older corvette had a flush handle that you push down with your fingertips and sqweezed back towards your palm you can do the research

@RCbashingtheKRATON 3 года назад

That's Art bro.. awesome work..

@mightress 3 года назад

That will be a cool looking hotrod. Nice to see something different for a change.

@jackel440 3 года назад

Like others said. Kindig has a nice set of handles. Doors work just as good as my jeep doors. Looks good 👍

@brianparker9924 3 года назад

The hammer was funny as hell. Who hasn't had something like that happen.

@deathoughts 3 года назад

I shaved the handles on the Frontier and reworked the lock mechanism to lock and control the latching mech. All you see is the key lock itself. I can shoot you some pictures if needed. Pretty easy to figure out.

@frankm8533 3 года назад

Pretty slick idea

@mikeburris9856 3 года назад

Hey Kyle 4 door Jeep Wrangler has some billet inserts with holes for the door handles that might just work for this with a little modification. Aftermarket of course.

@glennshotrodgarage5509 3 года назад

What do you think of the eastwood sanding tool you were using ? Also what do you think of the rustoleum paint stripper Looking good !

@vintagespeed 3 года назад

either extend that pin all the way through both holes in the door hinge, or add a second tab to each body hinge so you have 2 pins per hinge. and the body lines on the door are great, dont cover them up with any kind of rub rail, imho..

@jenky1044 3 года назад

Looks great. I would Tig a wrench (grab lift handle) on each door (not in the way of your arm if rested on it). If you do it after the door is done you'll know where the center of gravity is. Just a thought. Have a great weekend.

@n20cpri 3 года назад

Nicely done! I was skeptical to start but man it worked awesome! Make a kit and sell it! lol

@zackpeeler7008 3 года назад

I have a 46 truck and my hinge pins are the trailer hitch pins with the safety rectangle on it unclip it pull straight out

@hirokburagohain6271 3 года назад

Nice work bro

@scottgleason572 3 года назад

Aircraft door handles? Their are flush type. Kinda fits your theme 🤷🏻‍♂️

@malcolmyoung7866 3 года назад

Just been looking for some images on these...engine cowl types or the ones that flush fit it the door when closed...

@555_Kochi_STi 3 года назад

On that bottom hinge, I'd almost want to put a second pin on it to utilize both of the holes and give it more support. Good stuff as always.

@jonathanbowers4095 3 года назад

one thing you could do to improve those quick release hinges. like our aussie falcons and many euro cars you could attach another braceand pin to the top of the hinge pin holes having 4 pins instead of 2 for a more sturdier and less stress on those pins

@Shadowolf3777 3 года назад

Kindig it designed make custom door handles ! They make a couple of different ones that might work! Good luck on your build big fan and a sub for awhile now!

@WireWeHere 3 года назад

First thought I had too. I'm wondering now what they look like without the door attached.

@rickcrusenberry7027 3 года назад

The Kindig handles are super pricey. I’m sure he can fab something up for a lot less.

@firstnamelastname-th2ju 3 года назад

you should remove the window section from the doors. attach those parts to the main body so the only part that is swinging is the lower section but when the door is closed it still looks like it has a window surround.

@Sympul1 3 года назад

Upvoted for the broken hammer. That was awesome, Lol.

@19672701 3 года назад

Looks good ,maybe the Kindigit door handles,or build your own style be a neat build. Looks cool!

@hoss2200 3 года назад

Good job dude. Your approach to this car reminds me how Kurt Cobain would start every song on acoustic, before he would play it on his signature jaguar or jagstang

@MLTDC4 3 года назад

Check out the Jeep Wrangler design for your removable door hinges. Clean, strong safe.

@recumbentcountry 3 года назад

if you take another set of doors and cut off the front section where the hinges mount and the front part of the outer skin, you can make covers to hid the hinges.

@Brtmyster 3 года назад

Just an idea to consider. A single electronic push button on the door. Actuated from the catch so there are no wires to disconnect when you remove the door. Obviously you would need a great connection. You can do it. 'Do work son'.

@ryanhines719 3 года назад

Very nice! Thought for a minute you might have done a spring loaded pin with a key way to lock it down when removing the door or something.

@brettbresnan7078 3 года назад

Have you thought of putting raw brass flat bar (contoured of course) in the side trim area of the doors and around the door frame arounf the windows as a contrast/highlight to the bear metal. Just a thought. Love the series

@foxxxboxxx 3 года назад

Dave Kindig has some amazing handles. He also just released a modern style that would suit your needs

@MRD3R3K2You 3 года назад

no need for my comment I was going to suggest these.

@glennarnold3970 3 года назад

hi knock the pins out of the hinges and replace them with the hinge bolt from a e90 bmw you should be able to drill the hinge pieces to to suite the bmw bolt and tap the top side of your hinge if you where to look at a e90 e91 or e92 you will see what i mean and the bolt has a small torks head so would not look out of place cheers from down under ps the car is looking killer

@brady0630 3 года назад

been super addicted to watching your videos last week or so. top shelf craftsmanship and quality. making me want to make a plan for a metal shop long term. NOW! what made me comment is! 9:58 you are a brave man!! haha. ahhhhhhhhhhhhhhhhhhhh. i dont mean to sound like a big baby haha. ya just blownin my mind. are those gloves cut proof? what would happen if the glove catches? again impressive work man.

@garybrown3869 3 года назад

Dave Kindig has some very nice metal recessed handles.

@CrazyTheCrip 3 года назад

When you mentioned recessed metal door handles i thought about 1992ish audi 80/100 models, then you described the shape of decorative trim on the lower door, and i was like, yep definitely audi. While some of the handle parts might be plastic I believe entire outside parts are metal.

@chrispettit5866 3 года назад

I think a set of 1990- 1997 Mazda maita handles would look sleek on that build.

@shanewright6958 3 года назад

It's looking good 👍👍🇨🇱

@dandeflavis7004 3 года назад

Will those hinges actually support the doors once they have glass and all the other stuff a drivers door needs?

@sixpackroadrunner 3 года назад

Nice work as always. I have broke a hammer handle or 2 like that.

@BasinMotorsports 3 года назад

Others have mention KindigIt handles, which was my first thought. Not sure if Tesla handles are plastic or metal, and I've never seen how they operate inside the door. For hiding or eliminating the molding structure, I've thought about just welding a strip across the face vs. riveting.

@ParkerMcEvoy 2 года назад

Look at the Astro van handles the have a similar shape, but a lower profile. They could work?

@Frank-Xavier 3 года назад

Maybe fabricate a super interesting, but non-functional handle that complements the aesthetics if you don't want to shave them completely... Then put door poppers on it. Non-functional one's would probably give you the look without the headache of having to create the linkage.

@matthewschwartz6919 3 года назад

I always liked the original Miata door handles and I think they would be perfect on this, but non-chromed.

@zesticide1010 3 года назад

Flat space, go with it. Shave it and drop in an electro servo door opener, and put the side mirrors half way down the hood.

@WireWeHere 3 года назад

Leaving a rearward portion of the body hinge frame should keep it safe enough. Just anticipating your solution... I'm thinking welding the factory pin, or a chunkier one, in the door hinge heading downwards might work out strongest.

@glennarnold3970 3 года назад

2005 pontiac gto door handles here in oz they call it a holden monaro you can get them in chrome but they are still plastic but they are flush

@59vaughn 3 года назад

Very cool....

@limitlessbuilds 3 года назад

Could try some handles like kindigit makes. They are really nice units

@joshuadraper1534 3 года назад

Eddies Motor sports makes exterior billet door handles and they make any other part out machined aluminum you could possibly need

@Kodaoda 3 года назад

I did the removable doors on my bronco, get the old pins out, 80s gm truck door pins will will slide easily into/out of the ford door pin hole without binding or allowing the door to sag.

@charlesfields7908 3 года назад

Where your fabbed door pins are may want to re-enforce that tab cause its more weight on one side of the hinge rather than the hinge as a whole. Should probably still run a bushing on the pins cause your door holes will want to woller out bigger over time. Talk to your cnc guy that done the intake about a custom handle if you dont want a huge flat space. Also when you closed the door its alot of deflection towards the core of the door. Someone will say reflection but from a stainless fabricator and polisher perspective i watch for alot of deflection in material. Removable door idea is awesome though. 👍

@josephhenry1274 3 года назад

Keep it up

@kyleroberts5061 3 года назад

What wire connector will you be using for the electronics?

@johnsondouglas2555 3 года назад

That’s almost the same concept for the removable doors on some Baja trucks. Just that the trucks have their pins removable as yours is welded in

@johnsonsmywaygarage880 3 года назад

Build your own flush mount handle, maybe add some dimple holes in them to break up the panel. This way you could make them any size you want. Could be as simple as a pivot point and a flat plate. when you push the top part of the handle it unlatched the door

@MrJacquesvheerden 3 года назад

Yo MrKVoss. What is up Sir... um a hamer is not a pray bar...hahahahaha. Nice video indeed. Peace ✌ out Sir. 🇿🇦

@chevydyall7619 3 года назад

You can chrome plated plastic mate. Or I reckon 50s-60s just recessed in a bit would look mint

@Nathan-qm6dh 3 года назад

I know its a show car but I would assume when its driven its gonna be more of a cruiser than a race car..so what's the plan to keep IAT's from being out of control with no intercooler ?

@bradyteneyck 3 года назад

You could mold in a amc door handle those are nice and flush. Also would catch some attention cause everyone knows a amc door handle

@industrialpalletworx3548 3 года назад

Just a piece of advice after watching you cut that sleeve with the bandsaw. Brought back memories of myself doing the same thing. Only the blade grabbed the material and I had no time to get my finger out of the way. I didn't lose it but it's now numb and was the most painful thing I have ever experienced. Use a tool to hold the material. Safety first

@mikeriley7407 3 года назад

Kindig it designs in salt lake Utah has some nice all metal flush mount handles

@michaelevans7013 3 года назад

Land cruiser 80 series door handles Will do what you need.

@ants4561 3 года назад

Might be difficult to find but, have a look for Fiat Barchetta door handles. They’re pretty sexy as far as door handles go.

@KrustyPickles 3 года назад

You could do the ken diggit handles like the ones on tesla model 3s

@dcrahn 3 года назад

Will there be any door glass? If not I have a suggestion that I will type in later pending your answer.

@dannymadden6380 3 года назад

For the door handles, you could fab up a little steel pocket and line it with a C6 Corvette button with electric poppers? It'd be sleek and flush.

@soundman_caraudio 3 года назад

🙌🙌🙌🙌

@glanza6323 3 года назад

Your could try to use the mk1 mx5 door handles as they have the metal finish and aren't too big.

@frankenstanggarage7911 3 года назад

Lokar GSE-2100 Billet Exterior Door Handles. Ive seen them at Jegs, they are of great quality and they are pressure switch activated. Check em out.

@greenbots1 3 года назад

Ring brothers make some quality door handles

@michaelwatson6768 3 года назад

90s Mazda miata have a really neat small door handle and its metal

@st162man 3 года назад

i think first gen mustang mach 1 door handles would look good. it'll allow you to shave the indent where the door handles are, and provide an additional pop adding to the overall style you're going for.

@foxxxboxxx 3 года назад

Also for the inside in your door card, you could use a Porsche style pull tab opener

@davidr4332 3 года назад

HQ to HZ Holden door handles from 71 to 78 Australian cars look on the internet if they interest you , More on the Chevy side as they also come out with 350ci old school chevy in them . But i supposed you need the cut outs too for the door handles to fit right . Just hit in HQ Holden on youtube , Looking great too your build .

@LogicIndustries 3 года назад

For a "not quite shaved, but definitely not stock" look on your doors, you should consider a pair of our Lincoln style door buttons. I won't spam a link here, but if you'd like to see them you can do a Google search for "Logic Industries Lincoln Style Door Buttons". My web store is the first result. There is also an overview video on my channel that you can check out as well. The Bibbster is wild looking beast, I'm really digging how it's going so far. Interested to see how that front suspension performs once you get it on the road.

@tomrockholm-timeless_morph6691 3 года назад

Definitely kindig door handles, or another option is you can use any plastic handle and paint it silver then brush it to look like metal or plate it and brush the nickel plating.

@TazR6 3 года назад

Who could survive an episode with taking a shot with every "kinda" "kind of"? I know I couldn't lol.

@2fwelding842 3 года назад

Today's episode brought to you by the word "kinda"

@TazR6 3 года назад

@@2fwelding842 And the letter "Mmmmm". Also in today's episode, we learn "where not to put an apostrophe and where to use commas". (Sorry I could not resist that.)

@2fwelding842 3 года назад

@@TazR6 in my defense i don't use any punctuation normally and do as the autocorrect tells me

@TazR6 3 года назад

@@2fwelding842 I commend your honesty and thank you for the laugh.

@jeremyroberts6682 3 года назад

The kill fab logo integrated into the handle somehow would look cool

@RicBaraniak 3 года назад

I think for the body lines on the doors/fenders/quarters you shouldn't rivet anything over them, but instead, weld some steel in that channel... Grind, sand... Then you've still got that fb contour, but with a lower profile, much slicker, all metal look!

@wolfparty4234 3 года назад

Kindiget has cool handles

@jimmylowejr6583 3 года назад

Yes they do

@donnybrackett4440 3 года назад

You should do like the c6 corvette door handle openers. Its recessed like a door handle but its a button.

@burntsilverado 3 года назад

Damn man I somehow was unsubscribed. Saw a post of yours on instagram and was like oh shit the bibster I wonder how that's coming along?!? Looks good!

@burntsilverado 3 года назад

@Jeremy Bean I did figure it'd be farther along than it is, but every square inch of it is his custom work so it'll take time.

@jamesfriend3282 3 года назад

Look into kindig it design. They have trick door handle options.

@kendallcraig3571 3 года назад

Cut outs in doors for air intake to rear tires and cut A&B pillars off door and cap it

@Murphyslawfarm 3 года назад

G'day with the door handles have a look at the 70 series Landcruiser door handles they are metal and they are still made today.

@TheMeta6 3 года назад

Take a look at Fiat barchetta door handles, Nice simple sleek design.

@HAMMER_2.2 3 года назад

Some Audi A4/a6 or Challenger door handles would look awesome

@Tameless281 3 года назад

Brass knuckle door handles?

@PistonheadAsh 3 года назад

I think some early Audi's (maybe Audi 80?) had painted flush metal door handles.

@randybrechbiel9748 3 года назад

On the door handle yes the Kindigit flush mount.

@Wicked03GT 3 года назад

Make your own handle and shave the door lock hole. Maybe just make the surface flat with the door and leave a small gap to grasp it under, you still have a handle but keep your metal finish across the whole door.

@frankwoodall6198 3 года назад

Get you a block of carbon fiber and cnc machine you a door handle. That's different and unique!

@andrewwalker3055 3 года назад

I think I would make the pin long enough to go through both holes in the door bracket. Seems like that would make it less likely to sag

@Thefabforums 3 года назад

wouldn't be able to get it on and off if they were that long

@andrewwalker3055 3 года назад

I was imagining a removable pin or maybe a pin on both brackets w/ the door brackets sitting on top of both of the jam brackets. Hard to explain, but it would be the same as what you did just doubled up. After watching the rest of your video, it looked like your design is going to work just fine though. Keep up the good work