Making the LR4 Sound like a Racecar? Budget Exhaust Mod 

Gonna have to this, my neighbors will love it!

Bout to pick up a LR4 HSE. Awesome video

Just did this with the 2.25” on my 2013. Only removed the larger of the two mufflers. It’s not as aggressive sounding as yours, but I absolutely love the brrrr I get when I accelerate. Thanks for sharing and providing the links 😊

Nice sound! I do actually think to myself "I love the 5 liter in my lr4"... but then I realize I am old AF and I enjoy it being quite. I generally like quite exhaust (in my car also) because I can drive it harder without attracting attention on the roads. Plus long road trips, which is 90%+ of the miles on my LR4, it helps reduce fatigue if things are quite.

Sounds awesome! You’ll definitely be turning heads

I had a 5.0 Mustang with an X-pipe, cat delete and just the Borla resonators at the tips. Super loud and crackley. You LR is a bit less obnoxious, nice sound. Think I’ll just remove the pumpkin. Great video!

sounds distinct and elegance

Remove the x pipe and switch it to a 3" single in the center that runs for a couple feet. Then back out to the duals - the tone will be more exotic that way because the firing order if I'm not mistaken

Nice upgrade I love it! I wish you guys were closer so I can take my RANGE ROVER to you guys for upgrades.

Fuuuuu! That sounds beautiful! Awesome looking LR3 as well, one muscular looking truck!

So after a month ago I was sold on this conversion but my wife wasn’t keen,then at the weekend she has come out of the blue and given me the green light to proceed to making it happen I’ll order my x pipe online get some pipe and off I go! Gotta be easier than my 3” I did on my Tdv6 that was a good job !!

2008 LR3 V8 myself, I took out everything from the cats back, put a Borla pro x muffler and dumped the tailpipes just ahead of the rear diff. Angled them down a touch pointed mostly straight back. That fixed the drone in the cabin on the highway. Sounds incredible, love the blap-blap on downshift, at idle it sounds super mean. Wish it had just a touch more growl on hard acceleration but really like that it’s not so loud at speed. Great video!

Im a plumber and work on steal pipe a lot, did work I should say as Im retired, but the Lenox blades are the best. You're lucky you don't live in 'Ca. as the smog police would give you a life sentence for that mod. Lucky guy.

Sounds awesome. Love to do that exact setup.

Very impressive👍

You’ve got my attention…

I’m getting this done on Thursday! And price dropped to $20 on Amazon 😮

That sounds rad haha 🤘🤘

That sound is nice indeed. My tsv6 probably can't make that sound even all the pipes removed.

I have a 2008 LR3 V8 and installed on Super Sprint cat back exhaust it's not as loud as yours but has a nice deeper sound especially when I get on the throttle.

😯 that sounds good!! 👍🏼👍🏼

Oh yeah I plan on buying one of these and I always Street pipe my cars most I heard long headers on most cars plus that would be great isk lr4

I went to have a shop remove my mufflers, they recommended removing the resonator instead. It was way too loud and crackly when accelerating hard. I went back with a flowmaster 40 and had them put that in instead. It sounds good now, but I’m going to remove the mufflers myself to make it a little louder. I usually do my own exhaust work, but I must have been lazy that day.

Love it bro!

Would be great to see it on the dyno with a re-map tune to take advantage of a less restricted exhaust.

I have a 15, SDV6 HSE in the same colour, i love everything about it.... but now i wish it was a V8 😔

I did the same thing to mine, but with an H pipe instead of an X

Very nice 🙌🏼

Good vid.

Curious to know if you looked inside the primary dual in-out resonator to see the internals. Some i've seen have an X pipe type design internally.

Have you tried H-pipe? It will sound really deep and bass. But there should be a couple of mid-sized resonators after H-pipe as it amplifies sound compared to X-pipe that supresses. You still can try it without resonators just for fun.

Nice

LOL you chopped out the turtle. I will not be making my LR4 louder, although you can't beat the sound of a nice V8, I much prefer being stealthy when cruising through the Pine Barrens. You don't want to be attracting the attention of the Park Police.

Does it drone on the freeway... I love the extra bit of sound but if there is drone I would just leave it how it is for mine. Anything that you would change if you were to do it again? Thanks!

Can I get the link for this part where you got it from as I can't find it anywhere. Many thanks Nick lawrence

I have a 2011 LR4 HSE, picked up the X pipe you linked to Amazon and took it down to my local Midas for an estimate. They wanted between 7 and 8 hundred to do the job. Should have seen the look on my face . I just walked out of course. Went by Parker 4X4 who mainly work on Jeeps but I know they work on exhausts as well and they wanted more at a higher hourly rate for 2 to 3 hours of work! What? This should be roughly an hour to 2 hours max. I've seen another RU-vid video only take 30 minutes to do this work. It's not that easy finding an old school repair shop these days that will do the work for a couple hundred as it's not that big of a mod. Still searching for another shop.

What could i do to make it just a little bit louder than just the straight pipe and X pipe

nice one...but in the states is everythink allaud....impossible in europe they put you in jell !

What's your suspension setup

Is it bad if I straight pipe my Land Rover lr3?

What size straight pipes should i get for it to fit on my 2011 LR4 HSE

what tyre size? 265/65 R18? don't they rub in the front?

How loud is it while driving? is it too much to be uncomfortable on a road trip?

Do you have a link for that pipe expander?

Did you loose or gain power?

I’m sorry but my lr3 is way louder

Wow you killed your Land Rover. 😢

what pointless action

Why did you use a x/cross pipe instead of just going with straight or offset pipe please?