Maple Bar Stools | How to Make Bar Stools Using Loose Mortise and Tenon Joinery

Подписаться 338 тыс.

Просмотров 143 тыс.

50% 1

Ever wondered how to make some simple bar stools! Now is your chance to learn this woodworking project. In this video I will take some rough sawn maple slabs and turn them into three beautiful, functional and comfortable bar stools for our kitchen.
Plans to build your own! www.diytyler.com/shop/bar-stool/
If you would like to build your own there are free plans for these stools on my website:
www.diytyler.com/2017/07/31/ba...
This video is sponsored by;
Sawblade.com Visit their site for all your wood and metal cutting needs.
Big thanks to RIDGID for sponsoring our channel check out their latest power tool promotions!
www.ridgid.com/powertools/pro...
Some Tools I Used:
EDC Belt Carry: goo.gl/XZnWRx
Ear Plugs: goo.gl/R937J7
FastCap 16oz Glue Bot: goo.gl/X5aNZ0
FastCap Tape Measure: goo.gl/t2lWJD
Bessey Quick Clamps: goo.gl/jVAzeu
3M Respirator: goo.gl/ZexRQd
3M Respirator Filters: goo.gl/92Ejh0
RIDGID Cordless Angle Grinder: goo.gl/807O2y
RIDGID Cordless Trim Router: goo.gl/3jxBaz

Хобби

Опубликовано:

15 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 131

@pitsnipe5559 Год назад

Nice design, very well done. Thanks for making the plans available.

@BronkBuilt 6 лет назад

Nice job! I especially like your kid hiding under your workbench while you planed the legs.

@DIYTyler 6 лет назад

lol....cracked me up too, thanks for watching!

@suhaibabbass 6 лет назад

Big 💖 To your work and your family

@DIYTyler 6 лет назад

Thanks!

@samb4486 6 лет назад

Good looking and practical stool that is simple to make.

@DIYTyler 6 лет назад

Thanks Sam!

@MikeHunt-gy4pt 2 года назад

cheers for sharing your project it really helps people get into the shed and get covered in sweat and saw dust. you broke down the build perfectly. I'm gonna steal some of your components to make my first stool

@zoolilba 6 лет назад

They look Great!

@DIYTyler 6 лет назад

Thanks Leigh!

@YouCanMakeThisToo 6 лет назад

Came out great Tyler! Really like how the maple is mostly clear with just a few streaks. -Caleb Harris

@DIYTyler 6 лет назад

Thanks man.....we are really happy with how they turned out.

@lafamillecarrington Год назад

I'm really impressed with your bandsaw - I'm guessing that it is out of my budget!

@_the_wife_3323 6 лет назад

Loving the natural wood look!

@DIYTyler 6 лет назад

hehehe

@angelochiarion1152 4 года назад

Fantastic all Orange 👍

@zaneh6224 6 лет назад

Stools look great, you’re stepping up to the next level of carpentry, keep up the good work.

@DIYTyler 6 лет назад

Thanks for watching!

@Woodified 6 лет назад

Really nice stool design.

@KyleVeatch 6 лет назад

Probably one of the best looking things you've built. Congratulations!

@DIYTyler 6 лет назад

Thanks Kyle!!

@matt_williams1015 6 лет назад

Nice job, Tyler!

@DIYTyler 6 лет назад

Thanks Matt!

@normandbrunet3496 6 лет назад

Hi Tyler, nice job for Bar Stools... your new workshop is super successful ... in more thank you for sharing with us ... You incredibly inspires us in our hobby ..!

@gillessophie6158 5 лет назад

Thanks for sharing, thanks for free plans. Greetings from France. Félicitations pour la qualité de vos vidéos et de votre travail

@scaretactictales5895 3 года назад

It would be nice to do a project like this for people that don’t have 30 different power tools they’ve never heard of.

@billdiehl156 6 лет назад

Hey Tyler! This is a great project build! I've been following you for a while and really appreciate the free plans. It's also been nice watching how your skills and projects have improved over time. You're definitely an inspiration to all of us DIY'ers!! Thanks for all you do!

@DIYTyler 6 лет назад

Thanks Bill! Was never really sure if people liked the basic plans. Thanks for the feedback.

@nickhdeep6leatherworks338 6 лет назад

That would be a cool video IMO. I am a leather worker but have found woodworking to be pretty therapeutic as a novice. Thanks for the content looking forward to more education.

@KSFWG 6 лет назад

That's a great looking bar stool, Tyler! Great job!

@DIYTyler 6 лет назад

Good, even you agree this one probably shouldn't be orange!

@KSFWG 6 лет назад

Well, maybe the chamfer could use a bit of orange...but that would be all... ;) lol

@FredMcIntyre 6 лет назад

Nice job Tyler! 👍

@69virgin1966 6 лет назад

Tyler that looks fantastic! The grain of the seat top is absolutely amazing. Great job!! Thanks for sharing

@DIYTyler 6 лет назад

Thanks man....am excited to see what they look like lined up next to each other!

@IMDunn-oy9cd 6 лет назад

I like it. Looks good. Nice job.

@samuelroberts334 6 лет назад

Very nice!

@dennisdownes9319 6 лет назад

Tyler........as usual, great build; great video!

@brycemaclean5441 6 лет назад

Beautiful

@pcproff 6 лет назад

Nice efficient shop dude.

@peterogers7561 6 лет назад

I have the same model planner that you have. I recently replaced the cutter head with the Byrd Shelix cutter head. What a difference. Much smoother cuts as well as being quitter. Kind of pricey but well worth it.

@Nicholaskids 6 лет назад

Hey Tyler, haven't watched the video but I know it's going to be good. Much love from South africa 👍

@DIYTyler 6 лет назад

Thanks man....hope you liked it when you got to it!!

@goemaerefabian6998 6 лет назад

SUPERBE BOULOT MERCI POUR TON PARTAGE

@edinhoboaventura 6 лет назад

Hi Tyler Nice Job, i Will copy this

@ladykenja2700 4 года назад

- VERY GOOD JOB, especially the cutting out of the seat. Effectively using the band saw is a 'technique' in & of itself. Making your own 'domino' cutter takes special skills also. R U an Engineer by profession ??? Anyway, thanx 4 sharing.

@akquicksilver 6 лет назад

Very nice piece Tyler and good job on the video,

@DIYTyler 6 лет назад

Thanks JB!

@bobleeswoodshop7919 6 лет назад

Very nice 👍👍👍👍👍

@brianriley9259 4 года назад

Great job. I was curious how you were making the seat. Very nice work.

@kennymysak2079 6 лет назад

Happy wife happy life. As the old saying goes if mommy ain't happy nobody happy. Great build

@DIYTyler 6 лет назад

You speak the truth!!

@carlosparra5737 6 лет назад

b noches Tyler están increíbles tus vídeos, me gusta la carpintería soy un novato pero me gusta aprender me gustaría un vídeo donde agas cajones para un closet y su base ,gracias y saludos desde cd Obregón, sonora México

@nannybobo5619 5 лет назад

Good job kid's

@eugenedaniels5925 6 лет назад

Love your videos. I just came across this video and your Ridgid chop caught my eye. What is that 12inch laser chop saw

@BruceAUlrich 6 лет назад

I really like the shape and dimensions of this stool, Tyler!

@DIYTyler 6 лет назад

Thanks Bruce!!

@colomadavid73 6 лет назад

Nice job Ty!!! I was wondering do you sell those yr "Checker Machine?" Id love to buy one from you.

@didanoff 3 года назад

Hi, thanks for video. I am only starting woodworking and now read a book about woodworking basics. Based on the book, because of season temperature changes, such stool top connection will destroy the whole structure or I misunderstood something?

@gpdoyon 3 года назад

Awesome stool. Thank you for the video AND the free plans!

@artbyveny 11 месяцев назад

Hi Tyler, excellent video tutorial. Thank you for sharing. What size dominos you used for these barstools?

@johncocking5363 6 лет назад

Tyler, Do you have plans for the home made Domino machine. I sure like your videos and the maple benches a a wonderful example of your work. Thanks John in Pensacola

@RobinLewisMakes 6 лет назад

That homemade domino machine is so rad! Stools look amazing, great job man

@DIYTyler 6 лет назад

Thanks Robin!!

@ddbronco1873 6 лет назад

Nice project!! Looks like a Jay Bates workshop 😉

@DIYTyler 6 лет назад

Jay is a good guy to mimic!

@ddbronco1873 6 лет назад

Tyler G that he is!

@twoweary 3 года назад

Nice build. No need to shell out a grand for a Festool Domino ! I'll look for a build video on that .

@emersonstewart8165 4 года назад

Great job on the stools. How did you make that home made domino setup?

@MaybeDave 6 лет назад

Another great project, Tyler! But when you're introducing the project, why do you look at me like you're trying to convince me to take candy from your white unmarked van? ;-) haha

@ScottKershawRX 6 лет назад

Excellent video, Tyler! I really liked following along on the build. I just love watching you work in your shop. That maple, with ambrosia accents is stunning! I'm so grateful to be numbered with you on #teamRIDGID. A couple questions for you about design and execution: 1. What were/are your thoughts about leaving out top rails on the stool (e.g. rails that were M&T'd like the lower rails)in this design? 2. Self admittedly I put wood movement in last place but how do you think the wood movement of the top, being glued to the support, will affect the integrity of the M&Ts on the rails? 3. How do you keep the kiddos out of your grill when doing milling and joinery cuts - especially when filming? For my kids it's like a moth to the flame. 4. More of a comment: B sure is lucky to have a loving, creative, hard working hubby like you. Thanks for the example!!!

@DIYTyler 6 лет назад

1) More difficult to make for sure, maybe not as strong? 2) Support grain direction is the same as the top so I hope it will be fine, couldn't think of another way. Am a bit worried about the lower supports being a different grain direction but my consolation is that is how I have seen every other chair. 3) I have to tell them all the time. You see they are always there. 4) Am pretty sure she like it! Thanks Scott....hopefully my shop can be graced with your footsteps someday.

@brianmacconnell1249 6 лет назад

when you say approximate, how much over do you usually go? 1/4, 1/2?

@TheAlogoc 5 лет назад

The conection bars between legs are also 10 deg cut?

@Belg1970 6 лет назад

Tyler love the look of the stool. Was wondering why not at least put a screw down into the tops of the legs to hold the top support piece?? Long grain to end isn't the best glue joint

@jonrennie 6 лет назад

New put a few nails into it.

@David_Powell 6 лет назад

I was worried about this connection as well. I wouldn't spoil the look of the top with nails or screws, but a blind dowel or "checker" in each leg would make it stronger. But then again, you only need strength when you pick up a stool by the seat (or when the kids knock one over!)

@timfrazer4443 5 лет назад

Nice project Tyler. Just curious, seems like the only thing holding the seat to the legs is a single nail in each leg and glue into end grain. Have you had any issues with the seat coming off?

@guyincognito. 3 года назад

I wondered this too. It effectively isn't any stronger than just edge gluing the legs to the seat.

@tthomasokc 6 лет назад

I was going to suggest putting chamfer on the feet to avoid tear out when scooted on the floor but in the final image it looks like you may have done that but not mentioned it in the vid?

@DIYTyler 6 лет назад

We have felt pads under the feed.

@CommanderCool76 6 лет назад

Where did you get the maple from and what was the approximate cost for these three slabs.

@harringtondave10 6 лет назад

Very nice job. Do you prefer to use the band saw for ripping?

@DIYTyler 6 лет назад

Hi Dave! Yes, less dust in my opinion and when the boards are not straight and flat I feel its a bit safer, less blade pinch.

@sktruesdale 6 лет назад

Tyler, Great video once again. quick question, did you have to angle the mortise on the leg to match the 10 degree angle of the supports?

@joebrown1382 6 лет назад

Beautiful work man & nice choice of wood. Do you pick up the 6 qtr lumber locally or order & shipped to you?

@DIYTyler 6 лет назад

I picked it up locally. Thanks for watching!

@joebrown1382 6 лет назад

Thanks I need to find some 6qtr for my table.

@andrewcaruana13 4 года назад

Did you take wood movement into consideration??

@glasbrnr 6 лет назад

You always get high marks from me, when the kids are in the shop. By the way, great stools.

@robertrada1660 5 лет назад

How much your cost for one of that saddle?

@suburbanhobbyist2752 6 лет назад

I'm curious why you didn't make those rip cuts on the table saw?

@DIYTyler 6 лет назад

More chance of pinching the blade and getting kickback since the slab isn't flat yet. And less dust and wast because of the smaller bandsaw blade.

@Solar750 6 лет назад

How are you accounting for the wood movement in those tops? I think it may cause issues being directly connected to the legs. I don't know your climate, but maple that wide and thick is going to move. If you haven't finished the other two yet, you may want to mount them with bolts and elongated holes in your aprons. That would also allow for easy removal and touch up in the future if anything happens to them. Great video!

@DIYTyler 6 лет назад

Never seen a chair with elongated mounting holes. The grain orientation of the leg bracket is the same as the top so I hope they will move the same.....the cross direction is quite a distance a way so I hope there is enough give in the wood.

@wdh375xen 6 лет назад

Looks Awesome! A little confused about the reference to a loose mortise & tenon joint. Looked pretty tight to me.

@gunslingerwoodworks8981 6 лет назад

wdh375xen technically it's loose tenon. Don't want your mortise loose 🤣

@wdh375xen 6 лет назад

Gunslinger Woodworks Yep, I got it. Gonna claim having one of those senior moments! 😀

@DIYTyler 6 лет назад

Looks like you got your question answered!

@wdh375xen 6 лет назад

Tyler G I did. Great project btw.

@stovex0r 6 лет назад

Hey Tyler, just wondering if you had some suggestions for alternatives to loose tenons? I imagine regular mortise/tenon joints would be pretty tricky on an angle, so do you think regular dowels would have enough strength? The other thing I was thinking was through-dowels using hardwood, but it would be better to go with something that wouldn't be visible if possible.

@DIYTyler 6 лет назад

Dowels would be good and half laps would be another option.

@stovex0r 6 лет назад

Tyler G Good call. Thank you!

@nickhdeep6leatherworks338 6 лет назад

Is it true with a longer out feed table for the planer that you will have little to no snipe?

@DIYTyler 6 лет назад

It will definitely help.

@tooljunkie555 5 лет назад

Are there any plans for sale on these stools? I'm looking to make a few strong stools and these wood b perfect

@DIYTyler 5 лет назад

Better believe it! www.diytyler.com/shop/bar-stool/

@tonybp965 6 лет назад

Where do you get the checker pieces that goes into the slots the checker makes, being that this is your design? Or do you make them yourself and how do you make them? Sorry for all the silly questions. Trying to learn. Hope you can get to my questions.

@DIYTyler 6 лет назад

I make them, flat stock....round over both sides with the router, cut to length on the badsaw and round corners on the belt sander. Cheap and make a bunch at a time.

@KnottenWood 6 лет назад

Tyler, love your work and your videos. You show us using this "checker/homemade domino" gizmo. Please tell me where the build video/instructions are for it, I must have one! Love the idea of saving almost $1k. Thank you!

@DIYTyler 6 лет назад

Build video here on on my channel...the design is not mine but you can find all the links for the design in the video description.

@tonybp965 6 лет назад

How do you know how far, length wise, to go on a round-over bit?

@DIYTyler 6 лет назад

Trial and error to what looks best.

@lloolliippoopp000 6 лет назад

Do you read comments Tyler? sent a few on some info guess yon don't read old ones maybe this will get to you. Doing some projects and going to buy some plans from you web. But need some info first, have you taken carpenter classes for some harder builds cuz some of your ideas look pretty tough and need a guide in this thanks.

@DIYTyler 6 лет назад

Hey William.....I read all comments (but the mean ones) but I have tagged the work plans and it usually gets sent to spam. I learned everything I do from RU-vid and Blogs, not classes. If you buy plans they are step by step with a lot of detail...and you have the videos to rewatch as well!

@lloolliippoopp000 6 лет назад

Well if your implying that my comment was mean it was not just thought you never read old post hard to keep track of. As it felt like as a subscriber after saying what a cool idea you had and I watch most of all you videos and a simple question takes a week to get back. didn't know you had more then a RU-vid channel for work till I watch your computer build so thanks for writing back but I found out through Jaybates channel most was self taught

@lescopeauxdugoupil2914 6 лет назад

Tu m étonnes qu 'ils font de bonne menuiseries , quand tu vois le matos qu'ils ont, donnez moi la moitié , on en rediscutent

@oliverdelica2289 6 лет назад

What's the blade diameter of your bandsaw?

@DIYTyler 6 лет назад

Don't recall but its specific to the laguna 14|12 bandsaw

@mcka-si7fb 6 лет назад

#thewife

@mireyahiguera2921 2 года назад

Es presumido en español es mejor ...gracias .

@ladykenja2700 4 года назад

- Very nice project BUT would have been even better if directions for making the angled leg cuts had been given. That part is not easy to "figger out." Otherwise, the stools are nice.

@DIYTyler 4 года назад

The free plans to into more detail

@jeetray11 2 года назад

all power tools. the beauty of old day carpentry is gone when things were done all by hand tools and massive mastery was needed. Its replaced by speed, precision, efficiency and not so much mastery. but it is just evolution and there is no stopping evolution. Not criticizing the project/work here just sharing an observation. What you did here is great.

@tooljunkie555 5 лет назад

Stools look nice Tyler! I was wondering where u been and Idk how but I have been unsubbed for quite sometime now! (Thanks youtube) im Gonna have to binge watch the past few months to get caught up ..p.s.I'm subbed again. Unless RU-vid u subs me again for the 3rd time now. -,

@DIYTyler 5 лет назад

Hey Joe! You know what is funny, was thinking about you three/four days ago wondering where you were! Way to go RU-vid. We have been hard at it, addition, lots of projects, new job and lots of other fun!

@tooljunkie555 5 лет назад

@@DIYTyler looking forward to seeing ALL of it..there were 4 other big name channels I got unsubbed to that I've been subbed to for yrs ..#fixyoutube

@teamtitan3975 6 лет назад

Nice. But it would be better if you have incorporated proper joints rather then using screws. This stools would not last long.

@DIYTyler 6 лет назад

A year in with the kids beating on them every day and they are still solid as a rock.

@rendel5024 3 года назад

I liked the video, though really can't figure out why people who are doing a lot of videos fail to lower the over head guard on the bandsaw. Thumbs down for this, thumbs up for the rest.