Marine C18 Caterpillar CAM in the Pull Truck! It LOPES Big Time!

Подписаться 971 тыс.

Просмотров 131 тыс.

50% 1

Check out highwayandheavyparts.com
ALL MERCH MUST GO! All Blue Collar Shirts are priced down! Visit brucewilsonshop.com
Subscribe to my second channel! ‪@brucewilsontoo4879‬
Check out Clay’s Website! www.babbindustries.com
Be Sure to check out our supporters!
Fitzgerald Peterbilt for all of your BIG RIG needs! fitzgeraldpeterbilt.com/
Green APU for the best comfort in a big rig! greenapu.com/
Buy Truck Wheels buytruckwheels.com/
Diesel Auto Power for all of your Automotive diesel truck needs! www.dieselautopower.com
Truck Trailer Pro for your Truck and trailer supplies! www.trucktrailerpro.com
Renegade Products for your Vehicle Polishing and Detailing needs! www.renegadeproductsusa.com/
Lifetime Nut Covers!
lifetimenutcovers.com
NEW MERCH!!
brucewilsonshop.com/shop/
Sunglasses I wear!
glnk.io/n86p/bruce-d-wilson
Use code BRUCE10 at checkout!
Jump boxes
jbtools.sjv.io/brucewilson
Use code BRUCE15 for $15 off your next order of $150 or more!!!
Looking for equipment? Check out our website!
buyatractor.com
Follow us here!!
SNAPCHAT- bluecollarbruce
INSTAGRAM- bruce_d_wilson
FACEBOOK- BRUCE WILSON
Hit the like button and comment!!!
Fan Mail, Send Too
12410 US HWY 301
Dade City, Fl 33525

Кино

Опубликовано:

3 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 213

@heavyequipmentdude6615 Год назад

Finally getting back to good content back to old style Bruce Wilson actual mechanic work

@scrotiemcboogerballs1981 Год назад

Put washers behind the cap and spring to make it run higher spring pressure don’t stretch the spring

@HammerHead524 Год назад

I’m going to come out and build you guys some tables. Drives me nuts setting stuff on the ground.

@CATA20034 Год назад

It is normal with big nozzle to have erratic idle rpm. The pulse duration is hard to control as it dump allot of fuel, but under load all is good.

@thomashagwood5050 Год назад

You should get KT3406 to build a second engine the kid knows his stuff

@Widenriley979 Год назад

Agreed

@Bruce_Wilson Год назад

Talked to him, he likes to stick around 800hp. I’m looking for 2500hp plus after this one let’s loose

@ryanhogan6509 Год назад

@@Bruce_Wilson Bruce just tell him, your building for a good time, not a long time., he too like to blow shit up..

@scratchingforthehellofit Год назад

@@ryanhogan6509 what he said

@cwb43068 Год назад

@@Bruce_Wilson Tell him your gonna treat it like a detroit and he will understand!

@nickhutton9756 Год назад

This is the kind of content that first got me into watching this channel. Would definitely like more!!!

@blueonblack3971 Год назад

I enjoy the build videos, this is what made me come over to watch Bruce. Either way great videos , keep it up.

@coreyeubanks7866 Год назад

It sounded great at the pulls tonight! That idle lope is sick

@matthewshoudy7887 Год назад

I thought the C18 was the 1000hp and the C15 was the 800hp it’s been awhile since I worked on that boat sold it 7 years ago but it was always good to us!! Good luck Bruce!!

@ericgriffin397 Год назад

That thing sounds like a beast!!! Great job y'all!! Talk to Tim about his ECM guy.

@citizendick6087 Год назад

Sounds great!!

@robhighfield4699 Год назад

Great video Bruce, your back to your roots, loving the new content with pulling vehicles 👏👍

@charlesroer972 Год назад

There’s a lot of things to do besides a cam change , coil bind , interference , spring pressures . Fuel pressure and delivery quality . When u change one thing , this changes everything .!!

@mikemorse8592 Год назад

The commonly available cams for these things the “800” and “1000” hp marine cams don’t change valve lift or profile from a run of the mill 3406e c15 cam. The only changes are to injector lobe profile

@vaughncowan4055 Год назад

I agree. I would have done a more in depth job.

@abbey5788 Год назад

Lou at Highway and Heavy Parts always hooks it up!! Looks great

@juanquinones2597 2 месяца назад

Hey great content and thank you for all the great entertainment you have given us thru the years. May God continue blessing and growing your blessings.

@FreightlinerFLD Год назад

Taxi gonna look sweet 🙂 Rolling up with the big tractor, semi the lawnmowers. Can't wait

@josht593 Год назад

Great content, you should look at the Bora Centipede Folding Workstands. I use them for work they are super light and all you need is a pc of plywood. Good luck pulling.

@benjaminstockton3917 Год назад

Good job Bruce sounds mean. Appreciate the channel buddy 👍

@toddclark332 Год назад

Hope it helps bud it should 👍🤪 can't wait to sit back in action

@biglsd1 Год назад

Fantastic video!! Sounds like Chitty Chitty Bang Bang, it's got heart n soul now!!

@johnybravovlog7028 Год назад

Nice work boys

@rickybobby7285 Год назад

Adept ape should come help to the out of frame. I know there are lots of mechanics on RU-vid lol

@mikenano8046 Год назад

Adept ape is the real deal!!!!

@brandonruhl4525 Год назад

@@danielhofer7386 Lol clown

@Alejandro-vb2fx Год назад

@@brandonruhl4525 Stop riding Bruce’s dick, rest assured he doesn’t care what anyone says 😂

@leejohnson6173 Год назад

@@danielhofer7386 options are like assholes, let's see your stuff..

@Frank-sf1wh Год назад

I just did an out of frame with my c-15. Seriously considered going c-18 parts, but I think a eco would have been needed too. Since mine was good I didn’t bother with the extra expense.

@Frank-sf1wh Год назад

What I meant was ECM not eco

@richardphilp6560 Год назад

Yes, I reckon you should go for the long handle issue

@Choochinc Год назад

I still don't buy that that's running right. I know proper fuel metering is really hard with large nozzles like that, but that sounds to me like a leaking valve or a badly spraying injector causing a skip. The fact that is doesn't start smoothing out until high rpm, even when it's being loaded up is what reinforces that opinion to me. Other pull rigs like this don't sound like that. They have a lope, but it's not a hard pop pop pop.

@lloydrobinson7081 Год назад

keep the clips coming

@johnrtrucker Год назад

Agreed, kt's channel awesome he's the kinda guy his dad gave him a cat motor to build rather than Legos he really does know his stuff

@g.c.farmer5616 Год назад

Sounds like a old 2 cylinder Johnny popper at idle

@jamespimental6919 Год назад

Something ain't right since the injectors

@mitchelllong467 Год назад

Sounds like a dead cylinder

@ThanksHero Год назад

@@jamespimental6919 Everybody was saying he mismatched injector wires on that video and I dont think he ever fixed it lol

@wasterlid Год назад

That Kubota has a real Swedish metal frontloader 👍👌

@akabiga123 Год назад

7:43 that’s what she said 😂 shout out from Big A. From Cartersville Ga.

@derektaulbee2360 Год назад

My every day truck has a marine cam and a couple other goodies. They really do wake these motors up.

@wc6553 Год назад

Let Tim Gentry tune it for you. His "HOT TUNE" will get you 3 million horsepower!!🤣🤣🤣

@dangit4341 Год назад

Not 3 million, maybe a couple hunderd thousand.

@williamthigpen4480 Год назад

If not 4 million. It’s a beast!!!!!

@dangit4341 Год назад

@@williamthigpen4480 that go fund me is his beast now.

@williamthigpen4480 Год назад

@@dangit4341 I promise he is making money now. Hate he had the fire but boy is getting paid.

@Gentryandsons Год назад

@@dangit4341 give or take a hundred or two!!

@jamesterry544 Год назад

Yessir ! So happy for what you are doing with your pulling stuff again. BADASS

@edwardstephens247 Год назад

Every team has that one guy that has an answer for everything! Right?

@elim.2889 Год назад

"that was a mustang" LMAOOOOOOO

@rickyj2013 Год назад

Paint pen on the idler gear is always a clear sign that someone who had no idea what they were doing had their hands in that gear set.

@farminggamer5784 Год назад

Gran video Mi like 👍👍👍

@cedricbroussard8738 Год назад

Awesome 👌

@Oldskool4321 Год назад

Potentially floating valves in the future!!!

@Seveneleven44 Год назад

We inherited a clapped out freightliner back in 2007 that was used to pull giant manure tanks around New York State…it had a worn out c18 in it and that thing was a pig even though it had a lot of hard use on it. I could pull a load of corrugated cardboard around at 70mph easily in the hills of Pennsylvania. Thing had guts down to 1000rpm….it also cost a fortune in fuel compared to everything else.

@ericdyer6223 Год назад

You guys have to much fun LoL at work I wish I could work for you

@LimaTangoZulu Год назад

That PCM: "baby I'm a ddIIIAAAAANNNNNOOOOOOSAAAUUUURRR

@kevinwiltshire2217 Год назад

That turbo

@belllpatrick Год назад

Awesome videos. It’s sure does sound like it has an exhaust valve staying closed for too long or is that popping noice just on the videos??

@TheFrank57 Год назад

The old pump sounds like a duck. It's duck hunting season ahahah

@stowaway475 Год назад

That's a nice raspberry tea

@Trenton-om9qs Год назад

I am loving these videos along with the pulling content. Get that truck a good tune and it will be a ripper

@ALNunnery Год назад

Cleveland Tennessee Waivin a Hand ✋️

@sambryant5662 Год назад

You should have used a wrench when you adjusted the valves, that way once you adjusted the valve you could lock it down right away. That's the way I was taught to do it at Universal Technical Institute.

@KingTX2K Год назад

Sounds like a devil Love it 🤙🏻🤙🏻🤙🏻

@doughamm5590 Год назад

Should take and make a base for the old cam and make something out of it. If you haven't already

@intothewinn7532 Год назад

You need a Pittsburg power system in it to tune that ECM.

@Dabaerr76 Год назад

Just a thought but wouldn't you figure out how to drive it down the track before you add all kinds of hp you don't know how to use? Just saying...

@Antiquefarmequipment Год назад

It ain't his first rodeo.

@nalley6815 Год назад

He’s not new to pulling lol

@edreeder9853 7 месяцев назад

I've got the Marine cam in my C15, does not idle like that, in fact I don't see much difference in power, to do this right there is a lot involved besides the cam.

@treya2403 Год назад

I usually take a flat metal band like the style you get when you order something on a pallet then metal band, Bend it in a U shape sit in the valley under the CAM and as your Copilot is pushing the CAM in you can lift with that band drill a hole through the ends of it run a bar through it then you can easily lift it up

@nathanjones5653 Год назад

32:02 Bruce put down the twisted tea and walk away. That leads too bad things.

@stowaway475 Год назад

Yea I watch him to and adapte channel too

@edwardstephens247 Год назад

Sounds more beefy with the new cam

@B0RN2RACE100 Год назад

I’m loving this car content. I was wondering why no one had more of this, so much you can do to a cat with just oem cat pets from gensets and marine parts

@michaelshafer2996 Год назад

Cat c 15/18 is like the LS of the diesel world. Gensets are detuned while marine setups are really pushed since they have so much cooling

@nelsonmattoon150 Год назад

Sounds better

@howardt1317 Год назад

Great video Bruce love the truck pulling though try to get a few will it start in

@jkdwayne Год назад

Look at Baldurs Control Systems , he has an ECU for Cat Pulling Engines.

@edwardstephens247 Год назад

Parts washer is the best.

@ruxoneto6560 7 месяцев назад

Yes aftermarket parts usually don't have the quality of o.e.m parts !!

@brandonfloyd6321 Год назад

I was eating domino's watching this. 😂😂

@nitrozack3062 Год назад

You should make a video with a cummins vs caterpillar

@JASONH01 Год назад

Dillon looks like your brother. He needs to talk louder he talks so soft lol. Good job with the semi and getting the pulling tractor. I couldn't make it to the pull in ocala vip was sold out I don't go anywhere without vip access

@luisrivera7748 Год назад

If you send the ecm up to Pennsylvania they can get you in the right direction

@user-zo1os7cv7w Год назад

Welcome Mr. Bruce is a very powerful engine and I admire your work because you are a professional truck driver and mechanic

@snakebit96 Год назад

you need to take the ecm to the guy that Tim Gentry uses!!

@raydangarrett6257 Год назад

U should do a parking lot tour

@vaughncowan4055 Год назад

They didn't change the Injectors or the cam gear seals.😅 This was truly a low budget job. It was fun to watch though. At least they got it to run.

@bigtruckin1821 Год назад

Wd40 cleans cosmoline read goid

@jamesgarner4352 Год назад

Are we ever gonna see content with the Dakota?

@shanehaws3828 Год назад

Put a damn washer under the spring

@Wingnut_Stickman Год назад

Pulse

@Widenriley979 Год назад

Have KT3406E make a tune for that thing

@anthonycunningham5872 Год назад

Yo, Dillon

@Sk8boardw9 Год назад

Now get ya a good tune she be moving out nicely....need bring that thing up to north east ohio kunhle motorsports park

@sodbuster4296 Год назад

Class Act Peterbilt- shreve Ohio is hard to beat.Cyclone machine builds slot of cats.

@roweinnovation Год назад

That truck would run in the 4.1 but till it gets the proper tune. Just stay and fix ecm

@scottbennett3382 Год назад

did anyone else catch bruce farting when he picked up the cam???? Funny as hell!!!

@kingjames7273 8 месяцев назад

That was a short 😊

@kingjames7273 8 месяцев назад

Shart

@jcsully Год назад

I didn't see the cam gear get the timing marks aligned. Must have missed that.

@warrenmichael918 Год назад

you missed it, he showed it when he was putting the top gear back on.

@barrygrant1140 Год назад

What is the part number for that cam ? 10R-7155 ?

@ryanhogan6509 Год назад

That’s what she said!! 😂

@MrAdrenalin17 Год назад

Any updates or vids on the free tractor that u guys had to split in half

@Antiquefarmequipment Год назад

Yea, been wondering what's going on with that

@Antiquefarmequipment Год назад

@@masterbates7016 projects aren't fast and simple. Especially when you have a life. Bruce is freakin running a business, trucking, getting his own projects and, AND trying to make youtube videos for us. And on top of all of that, he has a family.

@Bruce_Wilson Год назад

It’s running and driving. Didn’t get a chance to film the finished product

@chriswalshtv Год назад

Hey what’s up bro how are you

@juanquinones2597 2 месяца назад

Question ⁉️ maybe you can give me some info. 3406 b do you know the part number for a 800hp camshaft? Or is that even possible? Please and thank you for your help.

@bigjlee2 Год назад

I was at the pull last night On Sat it sounded like it was pulling so much boost then just fell over on its face what happened?

@FECosta-ei6pv 10 месяцев назад

Cat engines are the best ones engineers had ever made 👍🏻💪🏻

@Jesse_Jessie_James Год назад

Ha ha ha that is how my KW sounds like. And i love watching people's reaction's. Cause they think there is a big block Chevy Motor in it. And i am like nope Customized Cam and other thing's in it which makes it sound like that.

@glossamano1899 Год назад

@8:39 was it Bruce or Ryan?

@calvinh.8882 Год назад

We can call that cam Viagra. It made that engine's beat really hard! lol.

@mvela1235 Год назад

That's what she said

@calebmcelmurry9593 Год назад

Make sure you grease your shaft before you put it in

@David.Rodriguez27 Год назад

Def had me cringing on the way he set the valves. Setting valves correctly is very important on getting it to run correctly.

@scottnachtigal1616 Год назад

Hey Bruce you should have checked the cam gear lash after putting a new cam in. .001 .010 for lash good luck.

@scottnachtigal1616 Год назад

@Master Bates if that engine stays together I will be amazed. What a bunch of shit that was. Well he got all kinds of 💰

@Bruce_Wilson Год назад

We checked it.

@scottnachtigal1616 Год назад

@@Bruce_Wilson you check the cam gear lash with a ratchet. You didn't use a dial indicator. But the ratchet is close.

@Michael-nu1py Год назад

WD-40 works best to take cosmaline off

@DieselAfterHours Год назад

It smells like straight up fart how u expect to work in these conditions 😂😂 had me dead 💀

@martinriggs2957 10 месяцев назад

Is the C18 a good Engine? 800+ hp no probleme?

@ruxoneto6560 7 месяцев назад

No , you want to build a c-17 it will stay together, c-18 wirh longer stroke puts too much side pressure on pistons , they like to come out the side of block , then you will cry !!😂😂😂

@mahatma171 Год назад

I feel like all that can be tuned out still I know it’s an old ECM but still… ask Lawrence, Tim’s guy. Better you can get it to evenly distribute fuel, the better…. Way better on the longevity of any engine