No video :(

Massey Ferguson 165 4WD Front Axle Repair FINALE! | 5 Weeks of Blood, Sweat, and Gears

Подписаться 3,6 тыс.

Просмотров 274 тыс.

50% 1

🔧 In today's episode, we're wrapping up the long-awaited repair of the front axle on our 1967 Massey Ferguson 165 4WD tractor. This isn't just a how-to; it's a journey filled with ups and downs, laughs and frustrations. Buckle up for a 42-minute ride you won't forget! 🔧
☕ If you'd like to buy me a coffee:
► woodlandwrench...
💖 Your support helps me continue creating content like this ❤️
📚 Playlist of all MF 165 front axle repair videos 📚
• MF 165 4WD Front Axle ...
👉 Previous Video (Disassembly): • Massey Ferguson 165 4w...
👉 Next Video (Mud Test): • Will the MF 165 4WD Pa...
🔥 Grease gun locking nozzle 🔥
Amazon :
Recommended : amzn.to/3PaaL1h
$19 Alternative : amzn.to/44IYZRe
AliExpress :
€7 : s.click.aliexp...
€5 : s.click.aliexp...
🔧 Tools and parts used 🔧
Grease : amzn.to/3r4hvFU
🚜 About the Tractor:
Model: Massey Ferguson 165 4WD (1967)
Engine: Perkins 4.212 Diesel
Special Features: Aftermarket 4WD, Skid Plate, Igland 5002 5-ton Winch, Front Loader with Log-Pushing Plate
🌲 Why This Video Matters:
Real-life experience of repairing a tractor for forestry work
Emotional highs and lows of DIY repair
Tips and tricks for those considering similar projects
📌 Timestamps:
00:00 - Introduction
05:12 - Starting the Assembly
10:23 - First Hurdle
20:45 - Emotional Breakdown
30:12 - The Turning Point
38:00 - Final Assembly
40:00 - Outro & What's Next
#CrispSawdust #MasseyFerguson #TractorRepair #Forestry #DIY #4WD #Perkins4212 #IglandWinch #Skidder #NorwegianFarmLife

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@woodlandwrench 9 месяцев назад

☕If you think I deserve it, you can buy me a cup of coffee here: woodlandwrench.com/support Supporters of any amount can expect a shoutout in the next video! Thank you for even considering ♥ 👍If not, then a like and comment on this video, are both great and *free* ways to support the channel! Regardless of what you decide: thank you for watching ♥

@georgehealy8350 11 месяцев назад

Really enjoyed this. Lovely useful tractor with lots left to give and your editing style is also great 👍

@woodlandwrench 11 месяцев назад

I'm glad you enjoyed! Thank you for the kind words, really appreciate it ❤

@erlingnorheim6714 8 месяцев назад

Interesting! I did exactly the same steering refurbishment (change of steering cylinder, oil pump, king bolt, bushings etc.) on my MF188 2WD

@woodlandwrench 8 месяцев назад

That's awesome! I reckon it's pretty similar to the 165. Thanks for the comment, and for watching of course ❤️

@erlingnorheim6714 8 месяцев назад

@@woodlandwrench Exactly the same 🙂

@donaldstrishock3923 7 месяцев назад

This Guy "Wrote the Book" on "Don't force it ; Use a Bigger Hammer" & "Rust-Grease-Grime" is a "Excelent Protective Coating ; Way better than Paint".

@woodlandwrench 7 месяцев назад

😄

@johnmccrank7170 10 месяцев назад

Im guessing your Swedish , just by the lilt in your accent, enjoying the video, never seen 165 4wd before .

@woodlandwrench 10 месяцев назад

Almost! I'm from Norway, but to most people we sound very similar when speaking english. Thanks for your kind words, and thanks for watching ❤️

@bfields1448 7 месяцев назад

Yea from America here, never seen a 165 4x4 before. I got a 65 diesel 1963 2 wheel drive. 4x4 more common in UK than America back in 70s.

@kcphillips1000 11 месяцев назад

There was probably a hydraulic pump fitted to the front of the tractor where the spacers are positioned . This would have been to power a heavy duty front end loader and was driven directly by the crankshaft . Most agricultural loaders are powered by the tractors internal system . Your 4wd Massey 165 has probably been fitted with a HD loader at some point in its life .

@woodlandwrench 11 месяцев назад

Oh that's very interesting! I was curious as to why there were spacer nuts, looked very DIY to me. Makes sense if they removed something that, as you say, was mounted there at some point in time. Thanks for watching! And also, thanks for your subscription, it means a lot to me ❤️

@chyasirslife1225 7 месяцев назад

Interesting work👍🏻❤punjab Pakistan

@woodlandwrench 7 месяцев назад

Thank you ❤️

@coryboyd7958 11 месяцев назад

Cool guy!

@woodlandwrench 11 месяцев назад

Thanks for watching! ❤️

@farminwithfergusons 11 месяцев назад

very nice

@user-rb9rn3hr3d 7 месяцев назад

❤❤❤❤ good❤❤❤❤

@woodlandwrench 7 месяцев назад

❤️❤️

@lyndonwilliams268 10 месяцев назад

Come on bro bro. That tractor needs a little more love what you is giving is not enough

@woodlandwrench 10 месяцев назад

She has good things coming! Stay tuned 😊 Thanks for watching ❤️

@user-xw1kw1vc1o 10 месяцев назад

Good

@TheHairyFool 7 месяцев назад

Snap rings are also called 'Ping fuckit', for the very reason you demonstrated

@woodlandwrench 7 месяцев назад

Haha, that checks out 😆

@user-rb9rn3hr3d 7 месяцев назад

❤❤ at iraq vere good❤❤❤❤❤

@dadaautoengineering 10 месяцев назад

Good tractor 135

@woodlandwrench 10 месяцев назад

The 135 is great. Mine is a 165 though. I had a MF30 a couple of years back, that was an interesting little tractor. Thanks for watching! ❤

@SoniaSouty-td1ik 6 месяцев назад

Un super travail, je possède pour ma part 2 MF 1080 4rm esque de ton côté pourrez t'ont avoir de la pièces ??? Merci à toi

@lyndonwilliams268 10 месяцев назад

Bro bro you should clean all those parts up and put a little paint on them to stop them from rus

@woodlandwrench 10 месяцев назад

Yeah, I'd like to one day clean, fix and repaint the whole tractor, but we're looking at about $1500 and days of work to do that. I still might do it in the future, we'll see. Firstly, I need to get a new grill on her 😅 Thanks for watching ❤️

@user-tm2fl5gc9c 7 месяцев назад

husk å svinge framhjula heilt til venstre når du fyller på olje ;-.)

@woodlandwrench 7 месяцев назад

Aha, det gjorde jeg ikke. Ser ut til å fungere greit men jeg skal sjekke oljenivå igjen. Takk ❤️

@airesrebelo6242 10 месяцев назад

Ficou top,párabens 🎉

@woodlandwrench 10 месяцев назад

I google translated this from Portugese: "It turned out great, congratulations 🎉" I assume google was right, so thank you! ❤️

@crimsonsunshine264 10 месяцев назад

Aye, blue coolant/antifreeze (ethylene glycol) ..... for the older Perkins👍

@woodlandwrench 10 месяцев назад

Thanks for the confirmation. I hope you're right 👍 Thanks for watching ❤️

@TheGrimReaper1 10 месяцев назад

Are you the same guy who built the stone crusher? I have liked and subbed anyway. Good film, anyone who fixes up old Fergies is ok by me.

@woodlandwrench 10 месяцев назад

@@TheGrimReaper1 You're probably thinking about m. bjornstrom - A swede who built a homemade stonecrusher, great channel. Thank you so much! ❤

@TheGrimReaper1 10 месяцев назад

@@woodlandwrenchthank you for taking the time to reply, appreciate it. Are you able to get another grill for your 165 or have you got it somewhere. I am sure the tractor would feel prouder and work much better with a new grill. I think it would be too hard to make one the same.

@woodlandwrench 10 месяцев назад

@TheGrimReaper1 Yeah, it didn't come with one when I bought it. I think a grill is about $100 new, which is decently affordable, I think. I'll probably buy one for it in the not too distant future 😊 I'm getting a lot of heat in the comments for not having it on there, which is definitely understandable 😄

@AmisCorolla 11 месяцев назад

You don't want to hit in to new ball joint ends with hammer. it might damage the joint. ofcourse this is tractor so little slack in steering parts are no problem, but with the cars you don't want to do that.

@woodlandwrench 11 месяцев назад

I wasn't able to access the nut with an impact driver, so I resorted to tapping it with a hammer. I don't think I damaged it this time, but it's good to know for the future, so thanks for the information. And thanks for watching ❤️

@AmisCorolla 11 месяцев назад

@@woodlandwrench i see that. and its okay. You could use clamp to press it tight. :) Nice to see those old machines running.

@richvandervoort2950 11 месяцев назад

If you want to strengthen the front casting replace your spacer nuts with a flat plate with tight holes. You should probably also bush the holes in the existing plate so those holes are tight as well.

@woodlandwrench 11 месяцев назад

@@richvandervoort2950 Thanks for the tip, that's great idea actually. I might look into that. Thanks for watching! ❤

@josepinto9416 10 месяцев назад

Salut, je possède 2 Massey Ferguson 1080 en 4rm par contre sa fait maintenant environ 6ans que j'ai commencer la restauration par contre je recherche quelques pièces par contre peut ont avoir des pièces neuves comme toi ??? Merci à toi super MF 165 que tu a 👍👍👍👍👍

@woodlandwrench 10 месяцев назад

Sorry, I don't understand. Thanks for watching ❤

@user-fk8qz9wj4l 7 месяцев назад

Is it possible for me to get the opportunity to work in tractor repair and metal turning?

@woodlandwrench 7 месяцев назад

Sorry I don't have any job offers.

@adnanchadhar8329 10 месяцев назад

Good work ❤

@woodlandwrench 10 месяцев назад

Thank you! ❤

@adnanchadhar8329 10 месяцев назад

♥️

@Johndonvan861 11 месяцев назад

Was she manufactured 4wd or home modification?

@woodlandwrench 11 месяцев назад

She was imported to Norway as a regular 165, then rebuilt and sold new as a skidder. I have seen a few of these around in Norway, but I don't reckon there are many left. I do not know the name of the company that build them unfortunately. Someone told me that the front axle is the same one they used for various military vehicles, modified to fit the original MF front axle mounting bracket. I did not install it myself, but you could. I know there are aftermarket 4WD kits that will fit various old tractors, including this one. Hope this answered your question adequately. Thanks for watching :)

@Johndonvan861 11 месяцев назад

@@woodlandwrench thanks for replying

@colmanlong1032 11 месяцев назад

Very interesting video, what is the transfer case,would love to know if there are 4wd kit for DB 990.

@woodlandwrench 11 месяцев назад

@colmanlong1032 I'm not sure about the exact part number. There probably is a kit for you, at least one that can be modified to fit on your rig. On this tractor, it's mounted in place of the service hatch on the left-hand side, where you would normally access the hydraulic screen filter. Thanks for watching! ❤️

@karsteinrmuld3478 11 месяцев назад

Schindler made in Austria.....

@mikkel1249 11 месяцев назад

oil change on a 100 hours was because the oil wasent that good back in the day , it was not unusual to have an overhaul at 4-5000 hours . theese days oil you schould have no problems dooing 250 hours or as you do ewery 2 years . Ivan from Danmark

@woodlandwrench 11 месяцев назад

Oh, that's a great point. The manual is indeed from the late 1960s, and a lot has probably changed since then! Thanks for watching, neighbor ❤️

@user-fk8qz9wj4l 7 месяцев назад

Good evening, how are you? May I have a job opportunity with you?

@hasanchamanejoo5811 10 месяцев назад

تراکتور خوبیه

@woodlandwrench 10 месяцев назад

Yeah I think so! Thanks for watching ❤️

@user-fk8qz9wj4l 7 месяцев назад

Do you have tractors for sale?

@YesterdaysMachinery 9 месяцев назад

Tjenare, är du Norrman? 🙂 Riktigt frän med 4wd! /Richard

@woodlandwrench 9 месяцев назад

Yes! I am Norwegian, my name is also Richard funnily enough. You have an awesome channel. I am honored for your comment. Appreciate it, thank you 🧡

@YesterdaysMachinery 9 месяцев назад

@@woodlandwrench Haha, born in 1994 as well then? 😁 Just found your channel, and i really like your way of making vid's, meaning the cutting/editing and how you manage to make progress and still have quite short videos without me (as a viewer) loosing interest. And ofc good content! Subbed! /R

@woodlandwrench 9 месяцев назад

@YesterdaysMachinery Would've been funny, but I am a bit older, manufactured in 1991 over here, hehe. Well, thank you for the kind word (and sub). I am truly honored! I still have a lot to learn about youtube and editing.

@asdtop1284 10 месяцев назад

Great work, but you need speed and an old assistant. You will hurt yourself while working alone

@HomeMade.atv. 7 месяцев назад

why didn't you make the hydrostatic hydraulic steering a bottle in the front double action with a hydraulic steering head and a hydraulic pump and upgrade the tractor to become more modern and easier to drive and you preferred to repair all this provincial construction

@woodlandwrench 7 месяцев назад

Because to do that proper is much more expensive and time consuming. Would be a nice upgrade though. Maybe next time it breaks 😊 Thanks for the comment ❤️

@job38four10 8 месяцев назад

You must spent 3k in repair cost, so are you so far off the beaten path that you have to get packages at the nearest store 2 hours away or is there no FEDX? So I see how you have so much floor space, your door in on the side, I couldn't do that on my 26'x36 garage, my doors are on the ends, not sure if makes a difference or not, but sure does look like you have lots of room...... Did you find lost snap ring yet? I'll keep an eye for it incase it flew over here, or you threw it over here.............

@woodlandwrench 8 месяцев назад

Haha, yes, the snap ring may very well have flown over there 😆 We don't have FedEx in my area, but we do have others that will deliver to a home address. Yes, there's decent floor space. The building is ok. In a perfect world, I'd make it slightly longer with an extra garage door where I could park the new holland tractor. But I'm very happy with it regardless. Thanks for the comment, and for watching of course ❤️

@reveallroxy9910 10 месяцев назад

Sale?

@woodlandwrench 10 месяцев назад

No I'm keeping it for the foreseeable future. Thanks for watching ❤️

@austinbarasa7546 9 месяцев назад

I would like to buy your tractor

@woodlandwrench 9 месяцев назад

Thank you, it's a nice tractor! It's currently not for sale though, I need it for skidding logs 😊 Thanks for watching! 🧡

@austinbarasa7546 9 месяцев назад

Alright 👍

@andreassandberg1720 11 месяцев назад

Är du från Sverige?

@woodlandwrench 11 месяцев назад

No, but we're neighbours! I'm from Norway.

@andreassandberg1720 11 месяцев назад

Jaha såg nämligen biltema märket 😀

@woodlandwrench 11 месяцев назад

@@andreassandberg1720 Haha. Thank you Sweden, for giving us Biltema ❤️

@NAPSTERGEOS 10 месяцев назад

Your videos are cool, I subscribed to your channel, in a month I will also upload a video of a tractor that I just bought, an Ebro 684 6 cylinders inline

@woodlandwrench 10 месяцев назад

Thank you so much for the sub, I am honored! ❤️ Looking forward to see that video of yours, never heard of such a tractor.