I'm hoping to get the wheel off mine to do this job. I have been living with it for over 20 years with a vertical play that must be about 3mm. I have ordered a puller that is heavy enough to be kill or cure and have been feeding the taper with plusgass and heat on a daily basis for a couple of weeks. Even though the wheel is very tatty and almost down to the metal frame all over I want to avoid using a new one if I can. Edited to update. The puller turned up and 10 minutes later the wheel was off. £60 well spent! Followed your scheme on adjustment and I reckon the play in the box is now less than in the track rod ends so I'm happy. Thanks!
Hello sir, i have the same tractor Massey Ferguson 35 same mask and motor, from an unknown year of production. It is imported and i want to know how much kilowatts is it? There aren't any marks, thank you.
@@dazsden The easy way to tell if it's a 35x or a 35 is to look at the placard on the CAV injector pump. The maximum RPM is the last of the three figures on the second line. With a 35x this will be 2390 and the power output is indeed 44.5hp. If it's a 35 the placard will have something like 2140 and the power will be 39.6hp.