"MASSIVE" SINGLE TURBO ON MY 24 VALVE CUMMINS 

What are your thought on smeding? Heard both good and bad, I’m getting a similar size s400 and considered smeding but wasn’t sure.

Love the vp content maybe a video of how the anteater works on the 47re and it’s capabilities. All you ever see is on the 48’s.

Compounds are the only way to go on the older 5.9 that's what I did to my 96. I have a lower stall converter. With just my single 63mm turbo the truck didn't like it.

To laggy and Smokey, you can’t tow with that. Maybe if your in a flat state and have a small trailer. It will never pull a 12k lbs trailer over any mountains. The only thing that is good for is doing a brake stand and taking 5 min to spool and then doing a smokey when it finally lights.

Really interested in more I have a 464/83/.90 with ducky 7x0.011 fmvb and comp box my problem it’s more laggy the more you tuner it up

I have a low stall in mine with a 67/67 HX and it sucks ass

And it needs a manual lockup switch

6x.016 injectors and a quadzilla 2200 stall is what I'm run with my s467 spools great

I timed your 35-80 in about 8.4 seconds. I timed my 35-80 on my stock turbo injectors manual truck and it was 14.2. I think I might buy this turbo lol.

You need either a standard output or a hot rod VP and at least 6X.013s

I used a hx40 downpipe and got a flange and v-band off eBay for $30 it was already machined to slip over the downpipe on my second gen swap on my 08 6.7

I subscribed to your channel. keep it real and don't try too hard like most other youtubers. seems like you know your stuff on diesel stuff; cummins, duramax and powerstroke/international. thats why I'm subscribing. I work at a diesel performance shop in BC canada so I work on this stuff every day, but it's my passion and I love it, even after hours. Also, TIG that pipe dude you got it.

Schied stage 2 vp44? Custom ddp super mental injectors ?!?

any speculation how much power increase from stock 5.9 h.o / nv5600 to edge juice unlocked s475/62mm hx40 sac 7x13 injectors fass 290 5/8" lines

That truck is dope! 💯 Try some bigger injectors.

It needs a tst powermax

Holy omfg I need your shop

First like lol

Awesome video man. That’s gonna be a tough turbo to make a VP truck happy with. On my 24v vp44 I just bought a 62mm HX super 9 I have 150hp PDD injectors and JWA 5x6 and she lights quick and is Capable of making 600+hp which is all the VP is gonna give you anyways AT BEST so i say sell it and buy an HX super 9 62mm or 67mm that HE351 turbine housing keeps the bottom end torque and low rpm spool great and still makes all the power these trucks can put out with a VP44 IMO. All HXsuper 9s will come with a milled out turbine housing to fit a 67mm turbine. And they are usually spring gated like mine is which is much better for these trucks no boost pressure to gate it only drive pressure 👍🏻

You need a much much bigger injector . 6x.016 would be good

Hey how's the ant eater ? my 2002 has revmax trans that doesn't know when to shift.

Running 6x0.013s, sovp, Quadzilla and a 467.7/.83/.90 on my rig with a 2300 stall. Love the way it drives and spools better than i thought it would!

The turbo screams like crazy

you'll get there. i drive a so vp44 7x.012 ejwa level 6. with low boost fueling on 1. s472 t4 .91 housing can drive it smoke free all day. just takes a min to learn how to drive it

dirtydiamonddiesel.com/​

I have an s464, 275% injectors, sheids stage 2 vp, springs/rods, and no tune. It’s about 650 hp

What hp does the truck have?

sounds good

🍻 nice work

I got my keytags and sticker, they look great.

seems to pull decent.