Master Using Standard Scraper On Inside of Bowl

Tomislav Tomasic Woodturning (Dodir Drva)

Подписаться 52 тыс.

Просмотров 11 тыс.

50% 1

Had to redo this video but I'm glad I did as I think second time I explain a bit better... Using Standard Scraper are not difficult, yes they do carry different tehniques and some safety issues but if you follow few simple rules ,you should be able to use standard scraper without nasty catches.
Hope this video will help out .
Enjoy
_________________________________________________
Harvey Europe
www.harveywood...
Harvey USA
harveymachiner...
Harvey Turbo T-40 Europe
www.harveywood...
KLINGSPOR CROATIA - www.klingspor.hr/
CLOTH BACK SANDPAPER - www.klingspor....
PAPERBACK SANDPAPER - www.klingspor....
SANDING PAD - www.klingspor....
SCOTCHBRIDE PAD - www.klingspor....
150mm SANDING DISCS - www.klingspor....
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscat...
VICMARK VM120 CHUCK
woodturnerscat...
MOFFATT WORK LAMP
woodturnerscat...
_________________________________________________
MY LATHE
drechslershop....
STEINERT WEBSITE
drechslershop....
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idev...
SCRAPERS - neureiter.idev...
CRYOGENIC BOWL GOUGES - neureiter.idev...
WOODCUT PRO CUTTER - neureiter.idev...
WOODCUT PRO ADVANCE - neureiter.idev...
IRONS SHEAR SCRAPER - neureiter.idev...
WOODCUT BOWL SAVER - neureiter.idev...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz...
Spindle gouge -www.gurtool.cz...
Calipers - www.gurtool.cz...
Sanding pads - www.gurtool.cz...
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr...
BENCH GRINDER
www.tobi.si/hr...
DIAMOND FILE
www.tobi.si/hr...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 108

@MikeM-sc4tx 7 дней назад

Thank you Tomislav for confirming that going slow with a scraper is better than fast with a gouge. Your the best teacher i watch!

@tomislavtomasicwoodturning 5 дней назад

Thank you, most of the time,if you slow down feeding rate either with gouge or scraper you will get slighty better surface

@boooshes 7 дней назад

This video has to be your very best as an instructional video. The camera angles, the sound, your thorough explanations were all excellent. Well done.

@tomislavtomasicwoodturning 7 дней назад

Thanks, really appriciate that and glad to hear ☺️

@northernhumidor5615 7 дней назад

To all the new turners watching, this is excellent teaching of solid bowl turning technique. Well done sir. Always a joy to watch

@tomislavtomasicwoodturning 5 дней назад

Thank you very much sir

@tonyturnswood 7 дней назад

Great tip on the "death grip" ... I need to learn to relax my guide hand with the bowl gouge for sure... great video, Tomislav with amazing tips for all levels of turners! - Thank you! (and glad the noise from the bearings is gone!)

@tomislavtomasicwoodturning 7 дней назад

Thank you Tony for watching, glad to help out ☺️

@davebenedum9253 7 дней назад

Thank you for the "over the tool" view. It really helped to see what part of the gouge was doing the work. Thank you for taking the time to explain "less than 90 degrees". I appreciate your patience and detailed explanations.

@tomislavtomasicwoodturning 5 дней назад

Thank you very much for watching 😀

@STMwoodturning 7 дней назад

I adopted your practice a few months ago and the bottoms of my bowls have never been better!

@tomislavtomasicwoodturning 5 дней назад

Really glad to hear that ☺️

@jimgill1105 7 дней назад

Tomaslav you've excelled here - a inspirational instructional video. It has cleared up a lot of the faults that happen from time to time.

@tomislavtomasicwoodturning 7 дней назад

Thank you very much

@MarklTucson 6 дней назад

Excellent video Tomislav. That was very helpful. The detail you provided made everything very clear. That bit about very light touch is a critical piece of information for anyone starting to turn. That avoids so many problems.

@tomislavtomasicwoodturning 4 дня назад

That is true, so many that came to me were too rough with turning.... Its almost like operation, slow and metodical Thank you soo much for watching

@luvwud 6 дней назад

Another video to add to the excellent list of in depth educational videos Tomislav. Cheers Geoff

@tomislavtomasicwoodturning 4 дня назад

Thank you Geoff

@brianjoneswoodturning3682 6 дней назад

Well done, thats blown a few myths out of the picture! Nice to see a craftsman at work thsnks for sharing ;-)

@tomislavtomasicwoodturning 4 дня назад

Thank you Soo much sir

@cobberpete1 6 дней назад

Thank you again for the Excellent Tuition.

@DougMilleratWoodSpunRound 6 дней назад

Excellent instruction while producing a lovely bowl. Well done my friend.

@tomislavtomasicwoodturning 5 дней назад

Thank you Doug, I really appriciate that

@edwardukleja4583 5 дней назад

Another brilliant lesson. Thank you.

@claudepotter7763 5 дней назад

Thanks again for another great vidio learning alot from you. I realy enjoy your teaching

@peltona 7 дней назад

I'm glad that lathe is working properly now. Also great to hear about Harvey's customer service.

@randyrockwell6136 6 дней назад

Thank you for this very informative video. You have a real talent for breaking a technique down and explaining it in a way that is very easy for people at all levels to understand. Hope you are getting all the details worked out on your signature line of tools. I also hope that they will be available to the US market 🤠🇨🇱

@tomislavtomasicwoodturning 4 дня назад

Thank you Randy, they will be available to order from me and I'll ship them pretty much everywhere within reason😄

@jean-philippepellan5249 7 дней назад

I am no expert by any means but a small tip I learned the hard way with scraper is to take into consideration how agressive the burr/edge is on the scrapper. I was having a lot of bad catches even when the scrapper was below 90deg only to noticed I had rolled the burr so much it was lumberjack hook and would dig into the wood 😅. Still fogging my shield a little when approaching a scapper to the surface for the first time on a project.

@tomislavtomasicwoodturning 5 дней назад

That is true and that is why I suggest when someone is starting out to use the burr straight from grinder, its much less grabby

@jorisdemoel3821 4 дня назад

Beautiful work and very clearly explained. Many thanks!

@tomislavtomasicwoodturning 4 дня назад

Thank you very much

@Joe-wi1yj 6 дней назад

This is a great teaching video, thank you so much and keep up the great work

@tomislavtomasicwoodturning 5 дней назад

Thank You soo much

@DavidBird-uu8km 6 дней назад

Thanks for another great information video.

@Salmo1960 6 дней назад

Fantastic video, very instructional. Thank you

@William_Kenny 7 дней назад

Very enjoyable video tomislav Will👍🙂

@rhysbailey2070 День назад

Good instructional video

@robindahlstrom5650 6 дней назад

Thank you, very good instructional video.

@oldcharlie5533 7 дней назад

Thank you..your videos on scrapers has helped me very much.

@Winterbourne_wood_turning 7 дней назад

I don’t suffer with the death grip but when I am doing turning that requires delicate touch I stop breathing……😅 Another good video Tomislav, thank you.

@tomislavtomasicwoodturning 7 дней назад

We have all been there, thank you for watching

@balahmay 7 дней назад

Your comments on cherry are of interest to me as that is what I mostly have in the form of prepared blanks to practice on. My current projects are 18” crotch figure bowls and the cores that came out of them. Your teachings were very helpful on getting good results with these. Especially the teachings on burr formation.

@tomislavtomasicwoodturning 5 дней назад

Really appriciate that and glad to hear that my videos help out ☺️

@billrockefeller5409 7 дней назад

Thanks for getting to the details of using the scrapers, I am now much more comfortable using them!

@tomislavtomasicwoodturning 7 дней назад

Awsome,glad to hear that ☺️

@jayscott306 7 дней назад

I can't say that scraping causes me problems, but your instructed so much more theory I think it will be even smoother for me. So many instructors tell you what and how. The why is what allows you to apply the knowledge in any circumstance. Thank you for the theory. Scraping a bit above center was new to me. I'm looking forward to the scraping of the yellow heart, in my chuck and ready to go, tomorrow.

@tomislavtomasicwoodturning 5 дней назад

Thanks Jason, glad to help out,I need to find more free time to watch the rest of the Michael video, my days just don't have enough hours 😄

@HRConsultant_Jeff 7 дней назад

I just finished a olive bowl this afternoon and I used my scraper for the bottom and it worked great, but I wish I had seen your video first. I had a lot of the technique right, but you always show me some new things which would have made it easier.

@tomislavtomasicwoodturning 5 дней назад

Thank you, olive is great wood to work with,glad to help out

@908woodturner 7 дней назад

Great learning video, thank you

@DoctorSIS 7 дней назад

Excellent video, very useful for every level woodturners! Thank you!!

@tomislavtomasicwoodturning 7 дней назад

Thank you for watching 🤗

@georgepostins812 6 дней назад

Very well done

@user-bighughie 7 дней назад

Fabulous video Tomislav. I really like using my scraper so you've taught me a lot in this tutorial. Thanks 😊

@tomislavtomasicwoodturning 5 дней назад

Awsome to hear that ☺️

@mootnmike 7 дней назад

BRILLIANT as always, thanks.

@tomislavtomasicwoodturning 5 дней назад

Thank you very much 😀

@RobertSchoenert 6 дней назад

most excellent video

@turningwiththewoods 7 дней назад

Super instructive tomislav. Thanks for doing these great videos.

@tomislavtomasicwoodturning 5 дней назад

Thank You for watching

@stevenhansen8641 7 дней назад

🕶outstanding video Tomislav. Fantastic camera angles and sound is good. Thanks for the time and effort.

@tomislavtomasicwoodturning 5 дней назад

Thank you Steven,Really means a lot to me

@billstoffle7383 7 дней назад

Great job love the way u explain the reasoning behind the use of the tools

@tomislavtomasicwoodturning 7 дней назад

Thank you very much

@richardcarlson5189 7 дней назад

Great job teaching us. May God bless

@epmdoorn 7 дней назад

And again a very interesting video, thanks very much Tomislav, I also are interested in an update about your scraper, thanks

@tomislavtomasicwoodturning 7 дней назад

Thank you very much, I have sorted yesterday bussiness side of things,which took longer then expected as I can't make it faster unfourtually,but now in matter of days I should have everything up and running.... I'll announs it very soon,thank you very much for your interest

@jimgardner5410 6 дней назад

Another excellent video Tomi, thank you. I have also heard Richard talk about a very delicate touch. Is there any chance you and Richard will get together one day for a video? That would be the all time best thing on RU-vid. Also, can I make a request? I have seen various people talk about how they price their work. Often going on a size of the bowl calculation. I can't see how this works as, for example, a live edge burr with a wide rim and some beads etc. may take many times longer to make than a plain bowl of the same size from a piece of free cutting plain wood. Does the wood itself make a difference to final price? A piece of spalted Plum usually being more desirable than, say, a plain piece of Sapele. A video on that subject would be very interesting.

@tomislavtomasicwoodturning 4 дня назад

Hello Jim This is the link to my pricing opinion ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Gwkn3c1V8g.htmlsi=6bs13E-xdNdp5XxK Hope it helps I would like to make a video with Richard, maybe one day I get to visit or if he visits me.... Hopefully one day 😀

@jimgardner5410 3 дня назад

@@tomislavtomasicwoodturning Thank you. I just watched it and now feel slightly humbled (in a good way). Very helpful.

@timgooding25 День назад

Thank you Tomislav for your clear explanation of how to use a scraper. Where can I purchase one of these? I live in Romania.

@tomislavtomasicwoodturning 22 часа назад

I belive Neureiter will ship to Romania

@craigraper2911 6 дней назад

Did I hear you say you was using a spindle gouge? And no I am not complaining glad to seeing am not the only one

@tomislavtomasicwoodturning 4 дня назад

Yes, You sir are not alone😄

@Fieldlark 7 дней назад

are you making your own scrapers? If so, what kind of steel? Excellent video. You are a good teacher.

@tomislavtomasicwoodturning 5 дней назад

Thank you very much,Crown will make them for me, its m2 cryogenic

@stephenmcfadyen1385 7 дней назад

Pozdrav Tomislav, Kaki Si. A beautiful little bowl and a great tutorial, when you get around to selling your refiner will it come with the little nick you grind on it on the left edge?

@tomislavtomasicwoodturning 5 дней назад

Thank you very much Those who will want to order will be able to choose either factory edge, sharpen with grinder burr, or pulled burr with burnisher. And also if someone wants the nick for getting into corners

@joncooke2450 5 дней назад

Excellent tutorial Tomislav, thank you 👍 Quick question, which model of drill do you use? I'm looking to get a right angle drill for sanding 😉

@tomislavtomasicwoodturning 4 дня назад

Thank you sir I believe Makita only makes two models now, with cord like I use, I have one with fast change head

@larrypack1 4 дня назад

Another great video Tomislav. I'm curious about what angle is on your scrapers. I started out at 15 degrees and then 20 but it looks like yours are steeper than that and they work well. Of course that may be because you are a much more experienced turner than me. Thanks, Larry

@tomislavtomasicwoodturning 4 дня назад

Thank you Larry, just now I have posted a video on this topic that might help...

@larrypack1 2 дня назад

@@tomislavtomasicwoodturning Thanks Tomislav. I actually found that video before I read your reply and wondered if it was a response to my question. Much appreciated!

@barneyrubble5633 7 дней назад

Very nice bowl and finish. Any update on the refiner/burnisher availability?

@tomislavtomasicwoodturning 7 дней назад

@Pabloos8634 7 дней назад

Magnifique 👍

@oleksiypokotylo7323 6 дней назад

Thanks for the video Tomislav! Do you think regulare scraper is much eficiant than negative rake one? Why don't you use negative rake scrapers?

@tomislavtomasicwoodturning 4 дня назад

Yes, for me they are more efficient as I don't have to sharpen them nearly as often , to me I just don't see the need for negative rake scraper.... I have only one, Steve Jones grind and I use it only to round square smaller stuff. But that doesn't mean they don't work,they are just another way of smoothing the surface and we all prefere something different.☺️

@orgcoast5990 5 дней назад

Can all of these roughing operations be done with a scraper? I have a terrible time with gouges---BIG catches.

@tomislavtomasicwoodturning 4 дня назад

It can but there should be a reason for your cathes, there should't be catches, try watching some of my videos from TEHNIQUES playlist, perhaps it will point out where you make mistakes with gouges

@haraldmayer8113 7 дней назад

Thank you for your instructions! Well done and very informational! What is the size of your scraper? It looks a bit thicker than 6mm, which i use. To prevent this rougher grain at 40:00 i change the direction while sandiing in the lower grit.

@tomislavtomasicwoodturning 7 дней назад

Ofcourse, I would turn forward and reverse a few times during sanding, especially if there is a raised grain like im this case. This is what I call bowl scraper,ita 25x10mm, 1inch wide by 3/8 thick

@haraldmayer8113 7 дней назад

@@tomislavtomasicwoodturning thank you!

@randyrockwell6136 7 дней назад

One of, if not the best instructional video I’ve seen! You have a great ability to break a process down and explain all aspects. I have just purchased my first scraper to use on small boxes and definitely feel much more informed when I go to use it. I hope you get everything worked out with production of your own tools and that they will be available to the US market 🤠🇨🇱