MasterDeck by MoFi Electronics: Allen Perkins' Turntable Mastery Revealed

Подписаться 399

Просмотров 27 тыс.

50% 1

Introducing the MasterDeck from MoFi Electronics, a testament to the fusion of expert craftsmanship and cutting-edge technology. Allen Perkins, renowned for his turntable design prowess, has meticulously crafted this turntable to enrich your vinyl listening with unparalleled precision and clarity.
🔗 Learn more and shop now: www.mofielectronics.com/maste...
🛒 Locate a MoFi Electronics retailer: www.mofielectronics.com/dealers
🔍 Highlighted Features:
🔄 3 Speed Selection: 33, 45, & 78 RPM with precision trim adjustment for versatile vinyl playback.
🎛️ All-New Dual-Pivot Carbon-Fiber 10-Inch Tonearm: Engineered for the optimal balance of control and friction-free tracking.
🎚️ Precision Regulated Speed Controller: Ensures precise and consistent playback for true audio fidelity.
⚖️ High Mass Hybrid Aluminum / Delrin Platter: Designed for stability and reduced resonance, enhancing sound quality.
🔇 Isolation Feet by Harmonic Resolution Systems: Provides 5.5 degrees of freedom to effectively float the turntable, isolating it from environmental noise and feedback.
🌀 Encapsulated Spiral Groove Inverted Bearing: Precision engineered for minimal friction and superior turntable stability.
Embrace the future of vinyl playback with the MasterDeck, where MoFi Electronics' legacy of audio precision meets modern engineering marvels. #MoFiMasterDeck #PrecisionTurntable #AllenPerkins #AudiophileExperience

Опубликовано:

20 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@pauld956 3 месяца назад

I had the privilege to hear this at AXPONA 2024, and it's absolutely amazing. Was lucky enough to see Allen and had a chance to tell him so.

@jsorensen168 7 месяцев назад

Allen Perkins is a master of design.

@darrellgarrett72 4 месяца назад

Allen Perkins is Genius Level!

@JacobFrey 7 месяцев назад

It's beautiful. Congrats on expanding the lineup.

@MegaSnake76 7 месяцев назад

I own a vintage 1978 Onkyo turntable , but this looks really nice mate thanks for showing it .

@Zockopa 7 месяцев назад

Well,it does what my 1975 Dual 1249 does with a DV Karat under the headshell.

@vwestlife 7 месяцев назад

The ultimate turntable should be direct-drive.

@BUF-vr5cr 7 месяцев назад

Ha. Thank for sharing your opinion.

@matrix101redorblupill4 4 месяца назад

Denon dp 3000...

@dizzle1119 8 месяцев назад

An absolutely gorgeous piece...but about 3x more $$$ than I can afford to spend.

@dimebagdave77 7 месяцев назад

Manythnx Mofi🤘

@tg6373 5 месяцев назад

I think I like this tonearm -- needs to get me hands on one.

@chickenringNYC 8 месяцев назад

Love how they use a warped record to show off the insanely over-spec'd vertical arm motion!

@rickc661 8 месяцев назад

last year I bought a couple new LP's that were amazing - so warped one actually hit the tonearm.... and last week I got a new LP that, first time out , had the good 'ole LP pop / click.... ahh the good 'ole days.

@GastonBulbous 7 месяцев назад

not just warped but filthy! 😅

@firebearva 7 месяцев назад

Impressive.

@travis4619 7 месяцев назад

For a 6k turnaround you have so many options that isn’t utilizing cast parts in the tonearm. Good on mofi for utilizing a delrin platter but at the end of the day - this isn’t a 6k table

@martybrazill7935 8 месяцев назад

Sexy! I got a preview of it at Audio Advice Live in August 2023, and it was very impressive.

@chris-non-voter 7 месяцев назад

Nice Deck, I'll stick with my Garrard 401 and the two SME arms, it's quiet, stable and the music just flows effortlessly.

@stephenmclaughlin6174 8 месяцев назад

Does it convert your records to DSD files before playback?

@mikewish19 6 месяцев назад

hahahahahaaaaaaa

@len9518 7 месяцев назад

Beautiful piece, absolutely gorgeous. Just checked your website, and am wondering why you neglect to tell us the performance specs. Yes, it's fine to give us the weight, dimensions, arm length, power consumption, number of speeds,etc. How about wow & flutter, rumble, speed accuracy? Is it because those numbers are inferior to dozens of older Technics, Sony, Pioneer units, and you'd prefer we don't need to know that? Yes, I know, those specs don't tell us how good the sound is, but they do.

@richardelliott8352 7 месяцев назад

You are overlooking that the performance specs are not given under oath, and that some manufacturers, with Japanese brands getting a lot of press for not meeting specs, are historically known to publish erroneous specs.

@len9518 7 месяцев назад

No, most of the old specs are legit.@@richardelliott8352

@BUF-vr5cr 7 месяцев назад

@@richardelliott8352 Let him alone he wants to spout.

@max311955 2 месяца назад

Anche il mio gyra di 40 anni con la stessa testina potrebbe rivaleggiare ❤

@SRX2004 8 месяцев назад

I'd like to see a company design a high end automatic turntable. Is it possible? I'm asking because people are only getting older and their hands are getting more and more shaky. I think a good high end automatic turntable would do well on the market.

@rickc661 8 месяцев назад

I have a thorens 103 ( discontinued ) far as I know thorens makes the best avail auto's... ? I'm guessing You're thinking multi thousands of $$$ ? to me, I'm 74 and have had T'tables for a while going back to an original ( new ) AR. and yes I learned quick that for me full auto was the way to go. machine obviously handled the critical needle / soft vinyl LP contact better than my hands. especially if 'enhancements were in use. plus of course Ya can push the button & have a bit of time to sit down - or just relax after play. but I near always play DVD's I like concert videos be it D.Krall Paris , A.Netrebko. LaTraviatta or G.Dead movie ( 2 nd disc )

@maxbg 8 месяцев назад

Drop the tone arm before even starting the turntable. Safest.

@RetroView66 7 месяцев назад

The worst thing about the turntable world is this religious devotion to non-auto TT. Audiophiles are often elitist, never figuring they might not have ten fully functioning fingers forever. I use linear trackers that blow away most of these new gen tinker turntables.

@richardelliott8352 7 месяцев назад

@@RetroView66 If one has a limited budget, performance for the dollar must be optimized. given that everything rattles on a turntable, as pertains to what the needle sees during use, the fewer parts, the quieter the sonic signature

@richardelliott8352 7 месяцев назад

@@rickc661 I guess you are not a queuing lever type of person.

@jedi-mic 8 месяцев назад

What happened to my comment why is it not hearing anymore? What type of belt material is that? just silicon or neoprene or something else

@rafasiedlecki8973 8 месяцев назад

Does the MasterDeck have a cover?

@JacobFrey 7 месяцев назад

Their website says "no" to dustcover.

@stevenkoski228 8 месяцев назад

LOL, a string anti-skate mechanism, a cheesy-cheap tonearm, it’ll never replace my coveted Thorens unit.

@mauriziolagaxio4954 28 дней назад

Price ?

@kyoko61400 7 месяцев назад

This is all very good but can unfortunately be ruined by a simple $30 belt. This is the case on my Ultradeck + Mastertracker. The spot where the belt is 'welded' causes a 'boom' as it passes through the pulley, causing me to turn off my subwoofers (2 x REL S510). You should also focus on the design and manufacturing of the belt which is ultimately a fundamental component.

@jc51373 7 месяцев назад

you got a bad belt dude..I have the UD with a sub and don't get any bump. Something else going on there.

@acboone7 6 месяцев назад

@@jc51373Same! Zero issues with my UltraDeck belt also! He should deff reach out to MoFi about that something isn’t right!

@jedi-mic 8 месяцев назад

But you can have the Best of Both Worlds you can have the cables fitted in the head shell just by having a sliding block dovetail and a tightening With a nylon Bolt, the block can be removed and just a new headshell put in with the cartridge already connected, and just plug in the Block and tightened. I don't know why I've never seen it done like this?? if you make one make sure I get a couple and 15% of any sales as well royalty on the headshell. All rights received patent designed owned by me p.p I've got a complete new motor design need it put in production nothing has ever used this type of motor design before not going to leave comments about it but if you're interested we can talk

@Rob1972Gem 7 месяцев назад

So basically you re-created a really nice record deck probably 100 times the price that is no better van a really good record deck from the 1970s/early 80s those bearings you mentioned on the tone arm. They don’t even do one revolution, the tone arm on the moose by certain amount of degrees, not even one full rotation and direct drive turntables from the 1970s/early 80s used to keep 100% speed accurate and I’m a admit, a drive belt on the outside of the platter. Stupid idea gets contaminated by , dust and moisture in the air drive belt should be at least underneath the platter if you’re going to have a drive belt

@johne5543 8 месяцев назад

Any 70's or 80's turntable could probably outperform this deck without all the pretentious hype.

@RetroView66 7 месяцев назад

My Sony PSX800 or even PS-X55 kills these cheap designs.

@BUF-vr5cr 7 месяцев назад

@@RetroView66 Says the guy who has never seen or heard one.

@henriksrensen3220 2 месяца назад

Hahahaha LOL@@RetroView66

@macberlin9322 5 месяцев назад

This is surely a really nice und well designed turntable. The MoFi TTs come along with a cool style. But the Masterdeck costs as much as three Ultradecks. Here in Germany it is offered for 8.000 Euro. At that pricepoint you find only in Germany a handful of great manufacturers with excellent turntables which have a perfect finish (Acoustic Signature, Transrotor, TW Acustics, Clearaudio etc.). I'm sure the Masterdeck tonearm is well engineered but it doen't look high class. It's the same with the VPIs. It seems american manufacturers don't care much about finish. I can imagine the Masterdeck sounds great but for that price I would expect more. And in a promo-video such dusty vinyl??! Really? Funfact: MoFi sells dust brushes. They should use them.

@baredesigns1 8 месяцев назад

Lot of subtle marketing speak to bring out a middle-fi sound reproduction. Hard Fact.

@bobbymccourt6794 7 месяцев назад

Although I agree with you on the marketing speak part of your comment I fear you haven’t ever heard a quality recorded LP on a nice setup? Hardly middle-fi reproduction. Is this table worth $6K? That’s up to the buyer but 99.9% of most people couldn’t hear the difference between 33.33 rpm and 33.22 rpm etc. my 50 yr old AR still spins at 33.37 rpm lol with an oiled platter bushing.