Mastering the Perfect Cut: Straight Cut, V Cut, or Punch?

Подписаться 302 тыс.

Просмотров 46 тыс.

50% 1

Hey there, Cigars Daily Nation! Today's video is all about one of the most common beginner questions in the cigar world: "What's the best way to cut your cigar? Straight Cut, V-Cut, or Punch?" If you've ever wondered about the different types of cigar cuts and which one might suit your preferences, this is the ultimate guide for you!
Join me as we dive deep into the art of mastering the perfect cut. We'll explore the three popular cutting methods: the classic Straight Cut, the elegant V-Cut, and the efficient Punch. Each of these cuts has its unique advantages and charm, and I'll walk you through the benefits and drawbacks of each style.
Whether you're a seasoned aficionado or a curious newcomer, learning how to make the right cut can significantly impact your smoking experience. I'll share my personal insights and experiences with each cut, helping you make an informed decision on which one best complements your cigar enjoyment.
So, grab your favorite stogie, and let's embark on a journey to explore the world of cigar cuts. By the end of this video, you'll be equipped with the knowledge to enhance your cigar ritual and find the perfect cut that suits your taste and elevates your smoking pleasure.
#cigarsdaily #cigarsdailynation

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 228

@henryschekter2328 4 месяца назад

When I use a guillotine cutter, I gently press the blades against the cigar and rotate the cutter about a 1/4 - 1/2 turn thus slicing the wrapper very slightly. I then press cut the rest of the way. The cut is always clean and perfect never damaging or crushing the wrapper. Once I tried this technique I never looked back.

@jordanhal2814 11 месяцев назад

The ‘straight cutter on the table’ method is a great idea!

@tonka3439 11 месяцев назад

When the torpedo hits your uvula: "Hey buddy, throw up now!" Made me giggle 😂

@johnforetjr6801 7 месяцев назад

Been smoking cigars for 2-4 years now. Used to be deathly terrified of straight until I saw a video on how to properly do it. Pin was confusing at first because I thought you had to take out what was cut but then again, another video I happened across showed me otherwise. I use all 3 cuts, what I use now depends on my cigar and mood. Haven’t smoked a torpedo yet but now thanks to you and your video I’ll be able to not just cut but smoke one.

@jwoodfin1 11 месяцев назад

Tim, love your content brother. Only a few months ago your channel found its way into my feed....I was a non smoker but your advice and knowledge led me to try a cigar.....now my world has changed....this hobby is soooo relaxing and stress relieving!!! I have been missing out on the "brotherhood of the leaf"....this is true therapy and meditation!!! I picked up one of your acrylic desktop humidors and love it...I have also purchased some sampler packs and found some of my favorites. Thank you for opening new doors and experiences!!!

@user-kt7ff3jw1w 11 месяцев назад

Excellent video, thank you! I've fallen in love with the v-cut over the years and it's pretty much the only cut I use. For this reason I have avoided the torpedo and similar shaped cigars because I always assumed you couldn't get a good v-cut on them. Thanks to this video I'm looking forward to adding torpedo shapes back into my rotation.

@ice319 11 месяцев назад

I learn something new every time I watch these videos from you, Tim. I just bought a box of Oliva V Melanio Figurado cigars, which are shaped like torpedoes on the cap end. I forgot my straight cutter at home, and had to use a V cutter, which I had never used on a torpedo before. I cut it straight, and it was still fine to smoke. In fact I love using a V cutter on torpedoes now. But I didn't do it at an angle, even though I always cut at an angle with a straight cutter. Seeing you do it in this video kinda opened my eyes to a better way of enjoying torpedoes. Thank you Boss!

@robertfleagle4250 11 месяцев назад

As usual Tim, great vid. I have all 3 types of cutters, straight, v, and punch. I typically use a straight cut. I do like v cutters as well. I usually use a punch if I smoke my cubin sandwich bundles, because I've noticed I get more tobacco pieces from them if I use a straight cutter. Stay safe brother and thanks again for the awesome videos.

@danielleslie6771 11 месяцев назад

wow tim thanks for the amazing video, as I get more into enjoying cigars I am learning so much information.

@Aaron-up8mk 11 месяцев назад

Biggest cigar I’ve smoked was a 7x70 Ogre and I was grateful to have a punch cut for that. 99% of the time, v cut works for me. I’d never seen the torpedo trick before, that was great!

@MotoChurro 11 месяцев назад

As a newbie I like to sick with the kiss method. My Cigars Daily order will be arriving today. Just wanted to give a big thank you for the fast shipping!

@HillWatty-hu1rg 11 месяцев назад

Hi!!! I’ll be getting some of your cigars, in the mail, today! I’ve grown to be a big fan of the V cut! Happy Smoking!

@skeeterbone 3 месяца назад

Thank you Tim. I am just getting into v-cutting from a punch and I have definitely noticed a difference in draw. Thanks for the cutter recommendation too.

@mikecunha2823 11 месяцев назад

Great content. Really enjoyed it

@marvhalsey7544 8 месяцев назад

Very helpful! I use a backstopped straight cutter most of the time. It's got the logo of my favorite cigar lounge on the backstop. Plus I have a backstop from LaGloria as well. Very classic. I also have the JetLine FatBoy with punch, which can actually have 2 depths if you don’t use the locking setting. And I love the cigar rest on it. I'm going to try that Colibi SV! Seems to have the best combo. Thanks, Tim! UPDATE: So I bought the Colibri SV and I love it! Subjectively, the V cut seems to me to allow a slightly richer flavor to come thru the cigar to my pallet. But, the visible difference is that the interior of the cigar stays drier (fresher) longer than a straight cut. The interior of the V doesn't get wet, which definitely alters the flavor. So while I still like my logo backstop cutter, and the built in punch on my Fatboy, the SV has become my Goto at home by the fire. Thanks for all your great content and enthusiasm, Tim!😊

@nathanhawee5373 10 месяцев назад

Im still new to stogies, so thanks for the info

@david894 8 месяцев назад

Another great video. I like this guy!!!

@chrismorin1047 11 месяцев назад

Great video, as always. I use a double guillotine cutter from Colibri and love it. I am curious about the V cut, so might pick one of those up. Thank you, Tim, for such great content.

@mnmike130 11 месяцев назад

I use them all. I liked your tip on V cutting Toros. Thanks for the tips

@Slayem_RS5 3 месяца назад

I've had my Colibri for about 10 years still cuts clean. 10/10 id recommend

@millcreekrange 11 месяцев назад

I mostly use a punch. Mostly because it’s built into my lighter and it’s convenient. But I’ll also use a V-Cut at times as well. Especially when I’m out at the cigar lounge enjoying a good smoke.

@JohnSmith-tz7iy 11 месяцев назад

Straight cut everything and you can never go wrong

@joeysaucedo3428 11 месяцев назад

I prefer the V cut because the cap of the cigar can at times be a just a little dry and if you use a guillotine or a punch it could cause the cigar to unravel at the tip though using a V cutter to me will prevent from that happening

@ScorchedCast 11 месяцев назад

V cut, I’ve messed up too many caps lol

@austinbrown5426 11 месяцев назад

Lick the cap just a little bit before you cut and the cap will very rarely crack. Just don't do it if you're using someone else's cutter lol

@joeysaucedo3428 11 месяцев назад

@@austinbrown5426 oh ok Thanks for the tip I will definitely do that next time.

@austinbrown5426 11 месяцев назад

@@joeysaucedo3428 I use a punch a lot and they will crack a cap pretty easily, I've found just moistening it a bit makes a huge difference. Happy to help, that's why we're all here!

@DontBeAGunt 11 месяцев назад

A mature cigar shouldn’t do that. You can also moisten the cap with your mouth and use your own cutter to avoid making anyone angry.

@BLS1976PACHAPTER 11 месяцев назад

I have been going with the crosscut more and honestly I love it

@lordmarco 11 месяцев назад

V cut for life!

@richardheilman4602 11 месяцев назад

Thanks for the info. I smoke a Toro sized cigar for the most part and use a shallow V cut cutter and cut an X on the cap. I seems to serve mw well.

@Lonesomerocky 11 месяцев назад

I never use a punch! I don't know how many cigars I've ruined trying. I gave up. I use a V-cut mostly and of course the straight a close second. Great educational video as usual Tim!!! Long ashes to you!

@austinbrown5426 11 месяцев назад

It's very easy to ruin a cigar with a punch unless you have a quality one. The ones built into lighters dull after like 3 cuts haha.. I use a punch more than anything else, you just need a nice sharp one and licking the cap helps as well. If you hold cigars in your mouth because you're using your hands than a punch just feels better and holds up to teeth and drool better lmao

@EJGentleman 11 месяцев назад

Straight followed by Punch (largest punch for the ring gauge) and the V. I received a perfect cut straight cut as a gift and love it. Deep V cut by Colibri is my favorite V.

@austinbrown5426 11 месяцев назад

I use a punch a lot as well, on bigger gauges I do what I call a pig nose cut, you use a smaller punch and make two holes with a small space between. It looks kinda like a pig snout haha

@allsportnj 11 месяцев назад

I have a punch cut on my keychain for when I am out and about, a v cutter for when I am home and a straight cutter is in my bag for beach/pool/barbecue days.

@Shez74 11 месяцев назад

G’day from Australia. Just joined the feed. I use a V-cut by Colibri for most of my cigars.

@coolGrap199 11 месяцев назад

Happy gay day to you too mate! Appreciate the support. Enjoy the cigar

@kenklingenberg4680 11 месяцев назад

Tim, as of late, I've been using the punch. But I have V cut and straight cut as well. The punch is now my preferred because I'm lazy and my lighter has a punch as part of the lighter.

@mikeg6666 11 месяцев назад

The punch has become my favorite preference , no tobacco to worry about in your mouth. The only thing I use a straight cutter for is cigarillos....

@markahdz 11 месяцев назад

V-Cut is my preference, in some cases box pressed cigars are a little challenging but if you take tour time it can be done, also depends on the size of the cigar.

@samman623 2 месяца назад

Saw you on the Whiskey Tribe pairing sticks with whiskeys and i had to come over and learn the ways of the cigar! Cheers 🍻

@ishallfearnoevil6156 11 месяцев назад

I use punches on Churchills, V cut on box pressed, and straight cut on everything else.

@johntracy5536 10 месяцев назад

I prefer the V-cut personally because of the mouthfeel and also because I don’t cut too deeply. I usually cut torpedoes on the bias slightly with a straight cutter, but I’m definitely going to try the V-cut for that going forward. Punch is okay but does cause cap issues

@legalmercenary 11 месяцев назад

+1 on the H-Steel cutter. I'm probably 150 cigars deep on mine and it's still sharp enough to collect a debt. Infact I sold my Colibri V because I completely stopped using it after getting the H-Steel.

@ericwilliams4465 11 месяцев назад

I typically use a deep V cutter. Colibri works great. I use a punch cut when I don’t have it handy as it’s on my lighter. What I do is make two punches side by side to enlarge the draw area. Sort of a “figure 8” look. Work’s reasonably well.

@mmmcccc7910 11 месяцев назад

Haha ! you left an edit at 8:11. Thanks for the videos Tim!

@nils0603 4 месяца назад

Thanks for the video man, I just got the exact same SV-Cutter and love it so far I now ordered the Hoyo de Monterrey Epicure No.3 and was wondering if I should use the V-Cut kind of like you did with the torpedo here?

@Jerexify88 11 месяцев назад

I got put on the Perfect Cutter a long time ago, so I've used a straight cut for years, but to be honest, lately I've been more and more interested in the V-Cut. It's more versatile... Torpedo? Works great. Big ring gauge? Crown cut. It just seems like it would be really handy to have.

@chrismoody9855 11 месяцев назад

Yeah I've certainly been more drawn to the v- cut over the past couple of months. I invested in the same cutter Tim has. Works great.

@sticknsip7624 11 месяцев назад

When I buy sticks, I usually buy 3-4 at least of each kind, so that I could try each with a different cut to see if I can taste any differences and note them. But the V is my favorite! Sometimes with the 👑 head cut and thepunch behind that

@BigSeeBG 11 месяцев назад

I'm actually buying that SV cutter after watching this video! I've been holding out on a V cutter because I have that stupid douchey "straight cut is original style" bs mindset sometimes but I love an easy draw so I'm going to give it a try! Thanks Timmy!

@reyboy4284 11 месяцев назад

I started with a straight cut. One time I didn't have a cutter but I had a knife. I was scared to use the knife so I cut a v cut with my knife. After that I found I enjoyed the integrity of a v cut. but I found for some cigars, it didn't provide enough draw. So what I started doing and what I do now, is I use a V Cut, but then I rotate it 90° and cut again. Making a "cross" cut. Feels nice, prevents me from taking the risk of damaging the cap too much especially when I'm smoking and not just sitting there. Sometimes I smoke when I work so this lets me get a firm grip on the cigar with my mouth. Try it!

@BWBParmwrestling 7 месяцев назад

Don't have a cutter yet.. Probably gonna pick up the Palio V cutter you have on your site. Just using my grandpas old case knife for now.

@chrisg1749 6 месяцев назад

I have been using a punch because it doesn't need any additional hardware other than the punch on my torch, but I've been desiring more draw so I'm leaning towards a V cut.

@superman6338 11 месяцев назад

straight cut, cause I haven't tried the other versions of cuts yet, and don't own a different cutter. Still new to this thing. Bought two sample packs from Cigars daily - just getting into this

@sticknsip7624 11 месяцев назад

Get your local tobacconist to give you a different cut on your sticks if you go to a cigar shop/house

@clickboomgaming5712 10 месяцев назад

Ever since I've gotten the colibri SV, I've only used the V side! xD But on some larger cigars when I started back in the day, I may go for straight for a more open draw.

@theoak64 11 месяцев назад

Viva la Fernandez! Colibri deep V-cut. I always make a crooked cut with a straight cut. I've not done a punch yet. As for lighter i use Eagle torch. Inexpensive and reliable.

@Robertico7316 11 месяцев назад

I go back and forth from v cut to straight cut. I very really use a punch matter of fact almost never lol. I usually us a straight cut for smaller ring gauge cigars on a ring gauge 56 or bigger I go with a v cut. Torpedo I go mostly with a straight cut, but to be honest I've never cut a torpedo with a v cutter that way you did so I'm going to try it. Again thanks for the video like always.

@austinbrown5426 11 месяцев назад

I used to kinda look down on punch cutting cigars, but it's slowly become my favored way of cutting cigars. It just has a better mouth feel, the cap always remains intact even if I'm holding it in my teeth and it's really hard to get it wrong when you hand a buddy a punch who doesn't know what their doing. I do v cut larger gauges, but my norm is a punch.

@Viking_Kong 11 месяцев назад

I don't really have an allegiance to one type of cut over the others. I tend to mix it up a bit with my cuts. Depending on the cigar I'm smoking, I'll use the Jetline H-Steel cutter, Colibri V-Cut or the Colibri Quasar Punch. I like the Colibri Quasar Punch because it has multiple size punches on the same unit, so there's never an issue with the hole being too narrow. I've never had an issue with cracking caps. I have seen several instances, even in this video, where the V-Cut can apply too much pressure to the cap and crack it though.

@coolGrap199 11 месяцев назад

Bruh! This is exactly what i needed to hear about. Im smoking a liga privada t52 while you dropping this. Also thanks for dropping this video on gay valentines day. Appreciate the support❤

@jordanhal2814 11 месяцев назад

Gay valentine’s day?

@mikeg6666 11 месяцев назад

First off it's bro , and what the hell is gay Valentine's day?

@troyhetherington6744 11 месяцев назад

I have the Colibri SV. Love the V cut side. The straight cut side leaves a small step in the cut. Have a buddy w exact same cutter. Has the exact same issue. Is this common or did we both get duds?

@TexasNationalist1836 11 месяцев назад

What cigar do you recommend for a person who likes dark stouts and Porter beers

@jimigrunge 11 месяцев назад

Call me old fashion but I love a straight cut. Currently have a Calibri Double Guillotine with 440 stainless blades that I have at least 800 cuts on and it's still sharp as the day I got it. The black coating is looking almost as bad as that old V cutter you showed but its still cutting great. If I forget that I usually just grab my pocket knife (also 440 stainless) ,which is always kept razor sharp, and use that. My lighter does have one of those punches built in as a last resort but doesn't get used much.

@Fortjul 11 месяцев назад

Try the select draw. It's different but I love it

@mrthesquid 11 месяцев назад

I switch between a straight cut with a xicar x1 and a v cut with a colibri v cutter. It depends on what I grab first.

@TheEternalFather92 11 месяцев назад

I’ve been using a jet line punch cut torch lighter combo for about a year now. My favorite cut but anything under a 50 ring gauge I’ll whip out ole faithful guillotine

@nydieselinfl 11 месяцев назад

I mix it up, and sometimes it’s situational. In my Raptor, I have a Straight Cutter, so that’s what I normally go with while driving, but at the office, I use a punch, since there’s one on my lighter, and the cigars that I keep in my office humidor are normally toros or robustos. At home, I do all 3, wherever is convenient at the time. I have like 20 cutters total, whether it’s a V- cutter , Straight cutter or punch, whenever is in reach, I use. Plain and simple. My wife likes the Straight cutter. To each their own.

@autotechnica 6 месяцев назад

Nice video.i have all types of cutters but i find myself using the v cutter the most. A lot of loose tobacco leaves get jammed into the bottom though so eventually I'm worried it will clog and prevent the cutter from closing. The straight cutter just requires too much attention. If I'm in my car driving making a perfect straight cut almost always ends badly. My least favorite, like you is the punch cutter. I find it rarely extracts the punched part properly and ends up making a mess when i try to pull the piece it by hand. I vote v cutter. The only downside of a v cutter is not being able to cut down a cigar if you want to save a lit one for later. I know that's a bad practice but it happens so i always keeps a straight cutter around too

@cygnusx-1862 11 месяцев назад

Capiest part of the cap???? Love it.

@Frog_man007 10 месяцев назад

I use a standard straight cutter however, I did just purchase a colibri v cutter wish me luck!

@BarberDave 11 месяцев назад

I use them all but more so a punch & V. I do like the draw from a punch

@ThePaulkitchen 11 месяцев назад

Tim, love your content, curious how many cigars you smoke daily? How many do other viewers here smoke? I’m on about 2-3 a week. Is that too many from a health perspective?

@mikeg6666 11 месяцев назад

You're probably smoking the right amount , it's easy to start smoking more than once a day. I had neck surgery 6 weeks ago and I was smoking twice a day before that but stopped a month before the surgery. Doctors orders and now I just had my first one a couple days ago but I will be cutting down because nicotine affects the healing process , technically my Dr wants me to wait 6 months. But I am going to limit them after that time , I was smoking 2 full size and 4-6 cigarillos a day. Like I said I'm going to cut back going forward , plus it's easy to spend hundreds a month on cigars when you start smoking several a day...

@smokinggar714 3 месяца назад

As for v cutters after you cut them how do you smoke your cigar with the v going up and down or side to side?

@jakubcerny8650 10 месяцев назад

I am used to do punch cut everywhere I can, it is easy and always on hand, because it is on lighter. When I need to cut torpedo I need to dust off my straight cutter obviously 😁

@marvhalsey7544 6 месяцев назад

Tim, what's your take on cigar scissors?

@SladekillerOfficial 10 месяцев назад

I use punch. I have done it on torpedos straight on only issue was leaving a tail lol but I had a knife on me and cut the tail off but it smoked grate none the less lol

@dailyfocusgaming6830 11 месяцев назад

I usually just punch everything and if it’s a smaller ring gauge like 38-44 then ill typically do a V cut! Rarely do I straight cut but if I do it’s usually on a smaller gauges

@gorefreak1970rb 9 месяцев назад

I like the punch.

@randc47 11 месяцев назад

I like to mix it up with the cuts. That said, I do tend to prefer straight cuts on box pressed cigars. V cuts seem weird to me on box. 🤷🏼‍♂️

@DavidDefossez 3 месяца назад

Please test the "la fines lames" cutter and punch bracelet 🙏🙏

@markorollo. 4 месяца назад

Ive got a knock off perfect cutter from Amazon, the one that stops you cutting too much off your cigar, that just does a straight cut, i dont know if i can be bothered trying another way lol.

@jbonhom 11 месяцев назад

Love all the vids and I love the rundown of the different cuts for cigars, but I wanted to mention that you can make a bigger surface area with a punch cut in a pinch. What you can do is double punch the cigar. This is a good way to make a larger surface area on your cigar. If you only have a punch cutter. You can do a punch and a half by punching part of the way into the original punch cut and that will make a larger surface area for your draw. That is a great way to make a larger surface area if the punch cutter is the only cutter that you have with you.

@TheXcracker 10 месяцев назад

I don't see any affiliate links. Do you have any? I want the Colibri sv and would like to see you get a kick back.

@Engineer1897 3 месяца назад

Is one v cut cutter okay for large rings?

@jarrettmoore6237 3 месяца назад

I prefer the crown cut for my 60's what do you think? I like short fat cigars the nub is one of my favorites.

@troyvlahos7991 6 месяцев назад

For me, it depends on the cigar. If it's a large ring gage, I will use a punch, most standard ring gage parejos I use a V-cutter. And for torpedoes, I use the straight cut at an angle.

@TexasNationalist1836 11 месяцев назад

How do I sharpen a straight double cutter

@aldemirbaldbeardiful8635 11 месяцев назад

I prefer use the v cut on the box press cigars since the straight cut might tend to damage the corners of the box press the I use the punch for the round cigars 🤙🏼

@joshdeaktor5827 11 месяцев назад

I’m a straight cut guy, but will occasionally go v cut. I will do a punch as a last resort since my lighter has a built in punch.

@hellreiser6663 11 месяцев назад

Not so much about the taste but definetly the feel. I prefer large but shallow punch cuts

@richarddangles69 11 месяцев назад

Almost always a V cut guy. Got a xifei 3 in 1 for those times when I need a punch or straight cut. 60 bucks well spent

@josejara6059 11 месяцев назад

What about the table cutters that are a bit rounded out. Different sizes and a bit more of a rounded cut

@bradjakubowski8987 11 месяцев назад

I generally use a punch, because my lighter has on built in. And I have never messed up the cap with it.

@AngelRodriguez-gd6qy 11 месяцев назад

It is all about retaining the shoulder integrity. For a press box, v-cut never fails. For a large ring gauge, punch is the way to go. All others, a straight perfect cutter is reliable. Lastly, go all metal. They last forever.