Matek R24-D ELRS diversity receiver

Подписаться 69 тыс.

Просмотров 8 тыс.

50% 1

Matek R24-D ELRS diversity receiver. Flashing ELRS 3.0 using WiFi method.
INAV setup.
Matek ELRS R24D (Banggood) - bit.ly/3QAS0D0
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAirlinesUncut
► Newton Airlines blog - newtonairlines.blogspot.com.au
► Links for my build materials - newtonairlines.blogspot.com/20...
► Andrew Newton RU-vid - / andrewnewtonaustralia
► My portal - anewton.net
► My Thingiverse - www.thingiverse.com/andrewrcn...
► iNav Basics and FAQs - newtonairlines.blogspot.com/s...
► All my iNav CLI Dump files - bit.ly/2t2OPz7
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfunthings.com/Pro...
► GBC EZLOAD laminating film (May be discontinued) - shop.quadient.com.au/products...
► Alternative 75 micron laminating film (not tried by me) - www.boundtoimpress.com.au/sho...
► Depron and foam board - My 6mm and 3mm depron came from www.tradewarehouse.com.au But from 2020 it seems they no longer sell proper depron. I have not found another supplier yet.
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture. I don't have a Patreon account, and choose the minimum possible advertising option. However if you would like to support this channel here are some options -
►Direct donations to Paypal.Me - paypal.me/apnewton
►Affiliate links - BANGGOOD RC - bit.ly/3mMnJ93
If you use the affiliate link to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #MatekELRSR24D #ELRS3

Опубликовано:

11 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@unklian9221 Год назад

This video has brought home to me how out of touch I am. I just fly RC planes up/down, left/right & motor. I thought at 59 years old I was quite savvy......I have no idea what Andrew is talking about at all. Time to give up when my radio gear packs in I think.

@AndrewNewton Год назад

I barely know what I'm talking about as well. You can safely ignore this video and just keep having fun flying.

@raven_fpv Год назад

Don't give up if your radio fails. When Andrew explains stuff, it is easy to understand. =)

@jonoedwards4195 Год назад

I like them Pretty lights that flash, Flash,, Flashing lights.

@anthonystownsend Год назад

Good to have an Aussie reviewer reviewing ELRS stuff when the main ELRS developers are Aussie as well.

@staymad7206 Год назад

who cares about their nationality. We should have chinese reviewing these since they are built there!!!!!!!!!!

@jamesceastep8874 Год назад

Andrew: Wow! 16 FULL RESOLUTION CHANNELS! I

@ChaddRainsFPV Год назад

PSA: Any version of this receiver that has a silver bind button will also have 0402 inductors and an XTAL that is not matched correctly, resulting in failsafes under common circumstances. Be sure you are using the gold button version of these receivers. Source: Chris (a contributor to the ELRS project) has tested many of these and confirmed the issues; I, being the one who sold him the receivers, have replaced them. More info available from Bardwell's clips page and via the ELRS discord. Happy flying ya'll 🤙

@AndrewNewton Год назад

Thanks for the alert Chadd. Very tricky hidden issue!

@rgbosio Год назад

Chadd, I have the version with the gold button, it just arrived to me. Should I be careful, do some mod, remove the caps too?

@ChaddRainsFPV Год назад

@@rgbosio So far all “gold button” Matek Diversity RXs have 0603 inductors, a good XTAL and I believe longer antennas than the default pic of a silver button rx. There should be no modifications needed, though there is now a ‘debugging’ option in the ELRS fw. I recommend this as a temporary fw to test performance if you’re worried (or have a silver button rx), then reflash without the ‘debugging’ option. Short answer: should be good brother 🤙

@rgbosio Год назад

@@ChaddRainsFPV thank you very much, is always good to have some experienced people helping us!

@Sidiann Год назад

Do you know if there is a reliable place i can get a gold button one?

@nikotttin Год назад

My experience with this rx has been really odd. I'm using version 2.51 because of my spi quads that cannot run version 3.0. My tx is updated to the latest version and I'm using a pass phrase. I used the wifi method to update the firmware on the rx, and it worked as expected. However nothing moves in the receiver tab... but telemetry works perfectly amd I see my current consumption, satellites, and everything. On my last try I flashed the rx through a betaflight pass-through and it failed at 80% I now have a solid red light and need to flash the bugger through a uart...

@LobstersLobsters Год назад

thanks for the overview!

@AndrewNewton Год назад

No worries!

@AerialWaviator Год назад

Great info. Hopefully Matek sent you a R24-V ELRS to review as well. (V meaning for vario, having a barometer)

@AndrewNewton Год назад

I'll have to drop some hints for that one!

@The_Pub_ Год назад

Very interesting, thanks Andrew. I love the Matek gear also but its appears to be identical to the RadioMaster RP1 which is much cheaper.. Are you using the internal ELRS module with the Zorro or have you a decent external module?? Cheers mate..

@m3chanist Год назад

The RP1 doesn't have antenna diversity like this, no antenna switcher, only a single ipex connector. Nor the lna, the antenna amplifier, that this does.

@AndrewNewton Год назад

Zorro ELRS internal module. It works well.

@Chris-vc1dh Год назад

do you connect it to crossfire pad on fc? thank you

@typxxilps Год назад

You could show that without getting in trouble but it would need a different setup on the ground to avoid any trouble. You just need a line of singht connection over some km and deploy the rc plane on the ground and use the camera to show ailerons and rudder working via the goggles. Easiest legal way to show the range. Regarding matek elrs : I like matek flight controllers for wing a lot and had assumed that the matek elrs would be the same built quality. my Matek receivers had a horrible built quality, the smd components not really aligned and the frequency was at the edge - radiomaster TX16S where the remote usually has no issues. Therefore I had been disappointed this time with the elrs, the FC shipped same day was again rock solid. Looked like from 2 different assembly lines or 2 different workers maybe. You did not mention if diversity is a native feature of elrs or if they had added code and parts on the board to achieve it. I have not seen diversity elrs receivers even though I had thought to have watched all of the ELRS released in the past 1,5 years in the market. I had diversity only once before I guess frsky which you had recommended back in the days when FrSky was at a different level. thanks

@makewithmegma Год назад

💕👍

@BrunoB99 Год назад

Andrew, I have the same rx and I can only flash it selecting the device "Matek 2400 RX". If I select device "Matek 2400 RX R24D" I get an error "...target does not match". I spent a day trying to find some information. Any help or direction would help. Thanks in advance.

@AndrewNewton Год назад

Very odd Bruno. Try saving the target locally, then using the popup wifi screen to flash. I find the flashing process a bit flaky and intermittent sometimes.

@nikotttin Год назад

Isn't this a version problem? With 2.51 one has to use the 2400 rx. With 3.x you need the r24d...

@AndrewNewton Год назад

@@nikotttin Yes you're right

@BrunoB99 Год назад

@@nikotttin Yes, with 2.5 there is a diversity check box but with 3.x the diversity check box is removed and you select the proper device. I'm waiting for my TTL device to arrive and I will try via USB...

@nikotttin Год назад

@@BrunoB99 I'm in the same boat. The flash failed at 80% using pass-through. Need a usb-serial to unbrick it.

@rahadyanmuhammad271 Месяц назад

Hi I connect my R24D to Matek CRSF to PWM converter The R24D has a solid red LED but the Converter blink blue It seems it already connect with my remote since it has network icon and disappear when I disconect the Receiver But I have a problem. The Servo didn't move even though I toggle the remote *Previously I already binded the RX and TX. I used F405Wing and installed INAV. But the FC is burnt that's why I use PWM converter

@AndrewNewton Месяц назад

Dot know about the converter but this is what the manual says - LED status slow blinks: CRSF-PWM board doesn’t receive CRSF signal, e.g., receiver is not bound with transmitter, receiver is not connected to UART1 of CRSF-PWM board. 8x quick blinks: CRSF-PWM board received CRSF signal and failsafe value is saved. (firmware 1.1.1 or older) solid ON: CRSF-PWM board and receiver are working normally 2x slow blinks between 8x fast blink and solid on: CLI mode is active (firmware 1.1.1 or older)

@AtradiesInc Год назад

How to get it in bind mode would be helpful

@AndrewNewton Год назад

Search ELRS bind

@Chris-vc1dh Год назад

where can you get software to flash this rx?

@AndrewNewton Год назад

Watch the video

@rahadyanmuhammad271 4 месяца назад

I cannot update the firmware in ExpressLRS configurator "FC Found in COM 6 Connecting......" Then build error I also tried using expresslrs webflasher Cannot detect RX Target, blindly flashing I kept trying using Speedybee App Compilation failed Do you have any sugesstion? I really need your help Thanks

@AndrewNewton 4 месяца назад

I have a video coming out soon on that subject

@LostCloudx4 Год назад

Just got one, Wired into UART6 on my F4 omni. Fired up. updated via wifi on phone. Bound to TX... kept losing and gaining telemetry while sitting there. Plugged into betaflight.... no RX inputs...wtf. Tried the usual settings but nothing. Then tried to get into the wifi again... solid red LED... no bind to tx anymore.... no WIFI after XX seconds... nothing at all. Tried passthrough...nothing... WTF is wrong with it. I have a radiomaster RX spare here maybe should put it in but onto the SBUS pads rather than a uart? IDK I'm lost

@AndrewNewton Год назад

Update with wrong firmware at a guess

@LostCloudx4 Год назад

@@AndrewNewton Just got it bound... but now no inputs on betaflight or anything lol