Maytag Dishwasher Control Panel Diagnosis and Repair

Подписаться 44 тыс.

Просмотров 49 тыс.

50% 1

Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
List of part with links if you happen to need them
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Links
Instagram- / bearded_appliance_repair
--------------------------------------------------------------------------------------------------------------------------THis video will help those who may have a dead display on their maytag, whirlpool or kitchen aid dishwashers. This will show you how to test the control board to make sure it is good. This is a built in test to help those diagnose the dead display or ones that are not functioning properly. Hope this helps!
------------------------------------
Support the Channel by donating or using the links down below.
Try Amazon Business- amzn.to/3ukXqHe
Try Audilbe Plus Free Trial Here - amzn.to/3yx65te
Amazon Prime 30 day Free Trial- amzn.to/3fd7z4g
Donations are appreciated as well you can donate here - www.paypal.me/...
Stop by our Amazon store to pick up must have tools for appliance repair
www.amazon.com/shop/beardedappliancerepair
----------------------------------------------------------------------------------------------------------------------------------------------------------------

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@jeanallen7468 Год назад

After watching several vids…yours was the one that dialed it in and I was able to determine that my issue was the control panel! Thanks so much!!

@bikerfxds Год назад

Thank you thank you thank you! I am so glad that you saved me $271.00 that would have cost me for a new control panel. This is the exact dishwasher I have. All over the internet they want you to use multi-meters and all other kinds of stupid testers to diagnose the problem Your solution to bypass the touch-pad and listen for the motor was brilliant. I did that exact diagnosis and heard the motor. I immediately ordered the new touch pad which was the source of the problem for $192.00, received it today and installed it. Voila! Our dishwasher is back in town! Thanks again.

@Carlos-ri9ix 8 месяцев назад

Thank you so much. I did exactly what you showed. It's the exact problem I have. I'll be getting a new 'Control Panel' ideally tomorrow.

@Lunentucker 9 месяцев назад

Worked on a similar one this morning, and this sip proved to be very helpful. Thanks!

@reachthenations 8 месяцев назад

may I ask what you did that got yours working? I peeled back the strips like he showed, but I didn't see anything to clean. I didn't know it was possible to just swap out the panel. I thought I had to buy a new control panel which is a couple of hundred dollars. I'll take any insight you have. Thanks! Cindy

@Lunentucker 8 месяцев назад

@@reachthenations We did everything in the video and it started working again. Then it stopped again. Then I removed the touchpad as shown in another video, and it worked again, but the lights were wonky. We got it going long enough to hold on until our new one came in. Went with GE this time, but the build quality isn't as good as the old Maytag. Maybe all of the new ones are simply lesser quality, like everything else these days.

@reachthenations 8 месяцев назад

@@LunentuckerThank you so much for taking time to reply to me!

@jacobthompson335 Год назад

Excellent video! Saved me a lot of time and money, was able to swap out my panel and works perfectly now

@reachthenations 8 месяцев назад

@jacobthompson335--may I ask how much it costs to swap out the panel? I peeled back the strips like he showed, but I didn't see anything to clean. I didn't know it was possible to just swap out the panel. I thought I had to buy a new control panel which is a couple of hundred dollars. I'll take any insight you have. Thanks! Cindy

@kmichalec 3 месяца назад

If the pump runs without taking the unit apart (hold CANCEL on mine until it lights up) and then close door and pump starts running, does that mean the Control Panel is bad or the Control Board?

@tylermcclure4324 2 года назад

I have this exact dishwasher. Would you mind divulging where you purchase the new control panel from?

@fedaiwoldu2054 2 года назад

Thank u brother super helpful!

@mitchelljohnson8810 Год назад

Thanks for the video. I didn’t need to pull the latch out. I just put the control panel back in place after disconnecting the ribbon and shut the door I heard the motor running so I guess I will be getting a new control panel. Thanks again. update. installed the control panel and my washers. fills, heats and drains but will not pump. would this have anything to do with the high temp sensor I bypassed because it broke twice?

@sqservicersllc2552 2 года назад

Awesome tip thanks

@Iheartsupertramp 11 месяцев назад

Thanks man!!!

@504ksh 2 года назад

What is the issue with lg range start button not working ? Only that 1 button....

@gregbgregb8487 Год назад

Good video

@mightymotormouth 11 месяцев назад

What if the pump doesn’t run after disconnecting the ribbon cable and inserting the latch after reconnecting the power?

@chrispalmer1255 8 месяцев назад

So where do I get the button panel that you replaced in this video?

@lt858 10 месяцев назад

Where did you find the part? I cant seem to find a new one

@carlmccarty6470 2 года назад

I just learned about this recently but I will use your tip about the door strike. Bravo! I've read that a lot of techs change the U.I. and the main control on GE dishwashers to prevent call-backs. How do you handle those?

@BeardedApplianceRepair 2 года назад

For those I just check to make sure the main board is giving the 14vdc to the UI. If it is we know the board is good. We have a video on how to do that. Here is the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TI8cUjy5YOE.html. I have never had an issue misdiagnosing this with checking those pins on the Ge dishwasher. Also 9 times out of ten the voltage is there so most of the time the issue is just the UI. Maybe that is a shortcut they are doing. Btw you should know if it don’t work after installation. No call back, just own up to the mistake and get what is needed afterwards. Thanks for the comment and watching our videos! I love this test, it helps out with figuring it out. Was trained on this probably 7 years ago lol. I had a good trainer when I started in this business.

@carlmccarty6470 2 года назад

@@BeardedApplianceRepair Thanks for the reply and the videos. I'm about 5 months in the trade and your videos are a big help.

@ToConnect2000s Год назад

@0:52 Wow that capacitor on that control board looks quite swollen

@mikejovanovic1645 2 года назад

Do you have a video of how to diagnose why a timer will only work in timed dry and not automatic dry

@BeardedApplianceRepair 2 года назад

Sounds like a bad timer to me. Keep it simple on these things. Timers are supposed to move in timed or auto. It the timer will not move in the auto it sounds like the timer to me.

@conchim99 Год назад

Mine control board was full of cock roach droppings. I cleaned with 40w contact cleaner and let air dried . Used your method , it is running but control panel still not lighted up. It is responding i pressed cancel, and the pump started pumping.