Mazda 5: Door Lock Actuator Replacement

Подписаться 370

Просмотров 8 тыс.

50% 1

Mazda 5: Door Lock Actuator Replacement
In this video, we replace both actuators (latch) on the sliding doors of a 2010 Mazda 5.
The purpose of this video is to help guide you on first, how to remove interior panels, and secondly, how to replace actuators in this particular vehicle.
PRO TIP: We highly recommend a hand impact screwdriver for this job, as it may be difficult to remove the external screws to the actuator due to rust and corrosion.

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 7

@user-hs4nc1lv9d 10 месяцев назад

Hey thanks for posting the video! I appriciate it!

@heatherkaufman8197 4 месяца назад

Do you know the part number for the latch closest to the back of the car. I don't need the front latch, but I do need to replace the rear latch, and I am struggling to find the correct part. I need the drivers side sliding door rear latch. Thank you for any help.

@TMEx_GearstoGrind 4 месяца назад

This links to the Mazda parts system for the sliding door parts list. Hope that helps. www.realmazdaparts.com/v-2014-mazda-5--sport--2-5l-l4-gas/body--door-hardware

@maggiek7425 9 месяцев назад

Do you think this will be the same for a Mazda 5 that doesn't have an auto closer?

@TMEx_GearstoGrind 9 месяцев назад

Yes, should even be easier

@michealhernandez2004 4 месяца назад

Okay. But you didn't show how to slide open the door

@TMEx_GearstoGrind 4 месяца назад

The issue we had is opposite, in that it wouldn’t close. If your door is jammed shut, or won’t unlock, you might find a way to take the panel off from inside and get to the mechanism, or use a flathead in the door jam from inside to try and pry it to open while someone pulls on the handle from the outside. Also, you might try and lubricate the crap out of the door jam from inside, if it’s the door jam then it should open from there. Either way, it could be a two man job, one pulling the handle on the outside, while the other is working the door jam inside. Good luck