Mazda 6 2.2 Skyactiv Diesel Intake Manifold Removal For Carbon Cleaning

Подписаться 30 тыс.

Просмотров 31 тыс.

50% 1

#Mazda2.2SkyActiv #diesel #EGRvalve #cleaning #engineperformance #efficiency #emissions #airintakesystem #specializedcleaningsolutions #stepbystep #DIY #carrepair #savemoney
In this video, we will show you how to remove and clean the EGR valve on a Mazda 2.2 SkyActiv diesel engine. The EGR valve can become clogged with soot and carbon buildup over time, which can lead to reduced engine performance and increased emissions. By cleaning the EGR valve, you can improve the efficiency and longevity of your Mazda's engine.
We will walk you through the steps necessary to remove the EGR valve, including removing the air intake system and disconnecting the electrical and vacuum connections. We will then demonstrate how to clean the valve using specialized cleaning solutions and tools.
We will also provide tips and tricks to help you perform this task efficiently and effectively. By following our step-by-step guide, you can save money on costly repairs and ensure your Mazda's engine runs smoothly for years to come.
Keywords: Mazda 2.2 SkyActiv diesel, EGR valve, cleaning, soot, carbon buildup, engine performance, emissions, efficiency, longevity, air intake system, vacuum connections, specialized cleaning solutions, tools, step-by-step guide, repairs.
Hashtags: #Mazda2.2SkyActiv #diesel #EGRvalve #cleaning #engineperformance #efficiency #emissions #airintakesystem #specializedcleaningsolutions #stepbystep #DIY #carrepair #savemoney

Опубликовано:

25 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@stuartread9512 Год назад

One of the clearest videos on car maintenance. Very good indeed. Sometimes the toughest thing is when you see a new design clip for a hose or connector, they will come apart easily but only if you know how!

@MrNiceGuy94 Год назад

Thank you. I try to give and share as much details in my videos as I can. So that everybody can do it at home and fix their cars and save money at the same time! :)

@theartofflying3108 11 месяцев назад

@@MrNiceGuy94what can happen if i will ignore it and will keep driving like that with dirty intake? I have MAF sensor error code but it has been replaced and it is still the so on the forum I get suggestions for carbon residue clean up. Is that what it is?

@MrNiceGuy94 11 месяцев назад

@@theartofflying3108 is it for MAF or MAP sensor? If you keep driving it will get eventually worse and will have higher consumption and performance loss.

@theartofflying3108 11 месяцев назад

@@MrNiceGuy94 went on as MAF sensor fpr P0101.. error but I checked this and cleaned and it s still same after some on and off for the check engine. now its permanent error. Car drives ok though. I was suggested it could be a the other sensor that its causing this fault for the ontake carbon build up as the car past 56k miles already. Could it be true that it carbon causes this error as well as false self diagnosis?

@MrNiceGuy94 11 месяцев назад

@@theartofflying3108 message me on my facebook page please. I reply there quicker. Same username and profile pic as here.

@josephtai9632 7 месяцев назад

Thanks Mr Nice Guy. Great video. I had the warning for a while on my mazda 6 2.2 and finally decided to try this out. Easy to follow and it took ages to clean. Mine was worse than the ones in video and the exhaust ports on cylinder block were really bad as I could barely see the valve rods. Only cleaned all the parts about 80% as I plan to sell soon. Scary point after putting back together as it took six yimes before the engine finally rumbled back to life. Took gor a drive and its morr responsive and fuel economy seems higher and no more butning smell from exhaust after. Thanks for the great video.

@MrNiceGuy94 7 месяцев назад

Sometimes it takes me even 15 attempts to fire up.

@nenadbokan5758 3 месяца назад

Probably best video ever made . You are Mazda Whisperer .

@Philippe432 4 месяца назад

Thank you so much sir from France, everything was so perfect, congratulations again 👍

@blaisejames2815 22 дня назад

How long does the whole process take please? Removal of everything from scratch, cleaning and reinstallation?

@jdssometimes 14 дней назад

Hey, Great video - Im looking to replace my Glow plugs on my Mazda 6 2.2 Skyctiv (same car as above) but unlike other cars the Plugs are very difficult to get to - what would you recommend?

@garywelch7969 Год назад

Great video and did a successful diy job from watchingyour videos. Lots of fresh oil in my intake pipes. Unfortunately this is still happening. Dripping oil on my drive. Comes from the plastic pipe close to the battery tray. Drips of oil from rubber pipe connection comingout. Any ideas?

@MrNiceGuy94 Год назад

My guess is either the PCV system or your turbo is failing.

@garywelch7969 Год назад

Will the 2.2 D skyactiv have a PCV valve? If yes, any idea of its location?

@norbertracz5494 Год назад

Nagyszerű videó, köszönöm! Tiszta, egyértelmű. Great video, thank you! Clear instructions. Well done! Csak így tovább! 👍👍👍

@MrNiceGuy94 Год назад

Koszi szepen a visszajelzest. Errol a motorrol meg lesz jo par video a kozeljovoben. Szeretnem meg jobban bemutatni az egesz folyamatot.

2 месяца назад

Hello, thank you for this video. Could you please provide me the tightening torque ? Thank you in advance !

@casperakoma7273 5 месяцев назад

Thank you very much sir for this wonderful informative video. Great work step by step just learnt from you sir. I will definitely subscribe to your channel.

@thewavyartist242 Год назад

Thanks a lot my brother I just did everything you showed in this video to my car as my map sensor was broken. Can you do a video on DpF cleaning when the time come ?

@MrNiceGuy94 Год назад

If there will be one which needs it to get done surely I will do a video about it.

@planktone95 2 месяца назад

Szia, ha nekem ki se akar jönni a helyéről a MAP sensor, mert csak egy kis lötyögése van, de amúgy kifelé nem akar moccani, az valószínűleg jelentheti azt, hogy már annyira le van rakódva, hogy ráfér egy tisztítás. (Féltem tovább erőltetni, nem tudom mennyire tud bele szakadni) :)

@Teleport73 3 месяца назад

Many thanks for this excellent video. I'm thinking to tackle this job myself. Do you have a list of replacement gaskets required please? Preferably with Mazda part numbers. I also intend to 3D print a intake port adapter to use on my vacuum with a standard shot blaster. So could you also confirm the size of the intake ports please?

@user-px3us8bx Месяц назад

Hello. Please tell me what kind of vacuum cleaner you use (brand, model...?) Also, what type of blaster do you use? thank you!

@bartj7066 9 месяцев назад

Hey, thanks for this great video. I did the job on my mazda 6 without any issues, however recently did it on my friends car, and when put everything together, it wouldn't start. Feels like fuel isnt delivered to injectors. Any idea what we did wrong?

@MrNiceGuy94 8 месяцев назад

Just crank it till it starts, it will don't worry ;)

@dipimage1935 2 месяца назад

How many km had this car onboard?

@gheorgheluca6245 6 месяцев назад

Very good content. I followed it Thank a lot

@MrAkhtar1979 Год назад

Excellent video !!

@MrNiceGuy94 Год назад

Thank you buddy!

@MaxLuhans Год назад

Hi, do you know the torque for the 12 bolts of intake manifold?

@MrNiceGuy94 Год назад

The intake manifold on the 2.2 Skyactiv Diesel has only 8 bolts, and the torque specs for them are 20-25 NM. So make sure you have the same model.

@MaxLuhans Год назад

That means all of them first 20nm and then 25 nm?or is that a Torque range?

@MrNiceGuy94 Год назад

@@MaxLuhans Ow,yeah. Sorry,my bad. Mazda gives torque range, so between 20-25 Nm all of them. I tightened them to 23Nm.

@krakadylius1 11 месяцев назад

Hi, nice video. I have same mazda with 66k mileage and it started rough idling and also had egr related engine light. How can I contact you?

@marexciecinski4173 Год назад

Hovw much its cost , I need this for my mazda 6 2015 disel

@mariogavric7193 Год назад

Pozdrav kako se auto ponaša nakon čiščenja Koja je razlika? Moj je zacepljen planiram očistit blindirat EGR jer mi troši više ima nemiran rad i teže pali. Mazda 6 2015 175D AWD

@MrNiceGuy94 Год назад

Hello, owners say that it is more powerful after and has better fuel consumption.

@klartvatten Год назад

Great job , did you replace the gaskits or reused them ?

@MrNiceGuy94 Год назад

Thanks man. I reused them. As far as I know you can only get the intake manifold gasket separately, the rest come with the pipes or the EGR, so you can't buy them separately, at least I couldn't find. And since they are metal gaskets I reused them.

@soroleague7619 Год назад

Hi, the intake piping plastic tab shown at 21:13 on video. On my vehicle there plastic is cracked, making it very difficult to remove. Can i remove it from the metal hose clamps?.

@MrNiceGuy94 Год назад

That's a good question. Unfortunately I don't know. Maybe you have to get a new pipe.

@soroleague7619 Год назад

Ok thanks for reply 👍

@elkopanare7732 Год назад

Hi, is there a way to check if the intake manifold needs a cleaning procedure without disassembling? I've checked the throttle body on mine and it's clean. Is there a relation between them.. i mean if the throttle body is fine the intake manifold should also be good or thats not correct?

@MrNiceGuy94 Год назад

Do you mean on this engine? 2.2 skyactiv diesel? How did you check the throttle body without removing the intake manifold?

@elkopanare7732 Год назад

Yes, exactly, 2.2 175hp. I was in a repair shop and the technician there inserted a stick with a mirror and we saw that the throttle was clean.@@MrNiceGuy94

@MrNiceGuy94 Год назад

@@elkopanare7732 send me a message please on facebook. Same username and profile pic as here. I don't think that was the throttle body. As it is underneath the intake manifold and the intercooler pipe is connected to it.

@mikw1809 7 месяцев назад

Hehe ... lovely isn't it? 😉 Are you using good quality oil? ACEA C3? I'm using Shell Helix on mine. Wondering if the extra oil consumption of a budget oil might be contributing to this carbon problem?

@MrNiceGuy94 7 месяцев назад

I use Castrol or Motul ;)

@Toudi74 Год назад

Great, thank you.

@d55amg65 7 месяцев назад

Hi , I have done this procedure on my Mazda 6 2.2 I have fitted the egr. And the manifold back on however now the car cranks and will not start? Can anyone help thanks!

@MrNiceGuy94 7 месяцев назад

Keep it cranking, it will start up. Sometimes it can take up 20 attempts,even.

@d55amg65 7 месяцев назад

@@MrNiceGuy94thank you I have just done that and now it work ! You’re a genius!

@MrNiceGuy94 7 месяцев назад

⁠no problem buddy, I have been there too. 😂😂 I wish someone had told me that before I removed everything once again and then put the car back together, all unecessarily 😂

@cristianvoican4367 Год назад

Where are you based? How much would a clean of the intake cost and check the MAP sensor and if it doesn't look good a replacement of it. Thank you in advance, Cristian

@MrNiceGuy94 Год назад

Hello Cristian, Please get in touch with me on my Facebook Page. The username and the profile picture is the same. Thank you.

@cristianvoican4367 Год назад

@@MrNiceGuy94 I made a friend request in there , I can't message you direct. Cristian Voican my name

@MrNiceGuy94 Год назад

@@cristianvoican4367 accepted.

@dpranjko Год назад

Is there any way to delete the egr system since it does more harm than good

@MrNiceGuy94 Год назад

Hi, yes there is. People usually blank it off and map it off from the ECU.

@HD2You 9 месяцев назад

@@MrNiceGuy94it is only software modification or it needs also hardware modification? I am asking this because if it is needed some work at the EGR then is good to clean the intake manifold too to save some work.

@DrFixxer 2 месяца назад

What r kilometers of that car

@MrNiceGuy94 2 месяца назад

around 160k I believe

@davidbeck1038 7 месяцев назад

Köszönjük!

@MrNiceGuy94 7 месяцев назад

En koszonom ;)

@paul70662 Год назад

Great vid. What would be the cost for this job?

@MrNiceGuy94 Год назад

Hi, contact me on my facebook page. Same username and profile pic as here.

@MrGenerous05 Год назад

How much would you charge for this type of job ?

@MrNiceGuy94 Год назад

Hi, Message me on my facebook page. Same username and profile pic as here.

@SaxJockey 11 месяцев назад

What causes this? Is it mileage related? Looks like an expensive job. Is it only Mazda's that are prone to this? Edit: Just located a good explanation on line (axi international). Seems that all engines can be affected, probably some more than other 🙄.

@MrNiceGuy94 11 месяцев назад

It is because of the EGR system. All direct injection cars are prone to it, unfortunately Mazdas have it really bad. You can do the job yourself following my videos ;) or I can do it for you, no problem ;)

@SaxJockey 11 месяцев назад

@@MrNiceGuy94 Thanks for the reply. I understand now, just read up about EGR and DI. I am also aware of leaking injector washer issues, but doubted that was the primary cause of all this carbon build up. Things are fine at the moment, but thanks for the offer 👍.

@texarkana3781 2 месяца назад

Mazda really screwed the pooch with that diesel

@beau4899 Год назад

The stupid charge pipe won’t come off

@enginef5 7 месяцев назад

Could I not ask someone to just do a carbon clean instead ?

@MrNiceGuy94 7 месяцев назад

This is the only kind of carbon cleaning which actually does something ;) You can try the other methods such terraclean but be prepared that you will waste your money.

@MakivereM111 Год назад

Magyar vagy tesom :))

@MrNiceGuy94 Год назад

jaja :D Ennyire hallani?

@MakivereM111 Год назад

@@MrNiceGuy94 nem neztem egy korabbi videodat ott hallottam :)) nekem is ilyen mazdam van es epp jovo heten lesz koksztalanitva✌️

@MrNiceGuy94 Год назад

akkor viszont remelm, hogy hasznosak a videok es tudnak segitsegul szolgalni majd a tovabbiakban. ;)

@Toudi74 Год назад

Where I can find you ? My Mazda need you 😊

@MrNiceGuy94 Год назад

Hello, I am located in East London/Essex.

@Toudi74 Год назад

@@MrNiceGuy94 how I can catch up with you and talk or msg ?

@MrNiceGuy94 Год назад

@@Toudi74 You can contact me on my facebook page. The name and the profile picture is the same.

@Toudi74 Год назад

@@MrNiceGuy94 Great, thank you.

@danielbengin8299 Год назад

Hello where i can find you ?

@tmanda323 7 месяцев назад

Time for some power tools

@MrNiceGuy94 7 месяцев назад

I have since bought some ;P

@jihankibria Год назад

Hi there thank you for the video. My car has the same fault code. Where you based in East London?can you please share your garage address and phone number?