Medlin FPV Gimbal on iNav 7 // HOW-TO

Подписаться 333 тыс.

Просмотров 38 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy Medlin Gimbal parts and complete assembly at:
* medlindrone.com/store/
Open-source designs for parts can be downloaded at:
* medlindrone.com/open-source-d...
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
---
00:00:00 - FPV drones don't do this! Until now!
00:02:49 - A closer look at the Medlin gimbal
00:05:38 - Disassembling the servo before mounting
00:06:35 - Install the 5v regulator
00:08:15 - Connect the servo to the FC
00:11:47 - The O3 camera wire is too short. How to extend it.
00:15:24 - Reinstall the drive belt
00:18:15 - Mount the camera
00:18:39 - It's done! Almost.
My original Medlin Drone tutorial - • He put a camera gimbal...

Опубликовано:

11 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 113

@GiantAntCowboy Месяц назад

It’s crazy to me that Bardwell has never changed an O3 cable! Love this gimbal setup, been watching the development for years, Thanks for sharing!

@powersv2 Месяц назад

He mainly flies vistas.

@3DnRC Месяц назад

The German car oil filter replacement experience is so relatable😄! Thank you for this video!

@flaparoundfpv8632 Месяц назад

That print quality 🤌🤌

@mxracingunlimitedltd7784 Месяц назад

TPU im guessing?

@cinemoriahFPV Месяц назад

It's ok

@exidous6831 Месяц назад

Looks like PLA. Ya, the quality is a bit rough. I'd guess the speed is cranked up.

@flaparoundfpv8632 Месяц назад

@@exidous6831 it's TPU and it's shite.

@sigterm15 Месяц назад

@@flaparoundfpv8632 this is classic behaviour when TPU is wet as hell. very few people is able to do things well

@jamescunningham541 Месяц назад

Of course 😂 because I finished mine today. Jb, your servo tab vid helped out huge. Now got channel forwarding working and taking a first flight tomorrow!

@MCsCreations Месяц назад

Pretty interesting indeed! Thanks for the tutorial, Joshua! 😃 I've never thought I'd see a servo gimbal that smooth! Anyway, stay safe there with your family! 🖖😊

@shurumellafpv8188 Месяц назад

Medlin is the best , I have all projects from him

@VadimBryksin Месяц назад

to avoid servo skipping because the move is too long you can limit it in inav to some 70% of the servo movement, dont know exact number of percentage, but you just reduce the default 100 in the inav servo mixer to something lower

@OnPointDroneWorks Месяц назад

Got one on my bench just need to make time to finish the build. Thanks for the video I will commit to making this happen soon.

@billyknippers6983 Месяц назад

Your German mechanic is on point

@Mrcovert Месяц назад

Back when the ZMR was the drone to fly we had a server tilt camera on it with a 3D printed mount and controlled by a servo output that would keep the camera level as the drone flew. Never connected it to head tracking like this tho.

@ElementalGeneral Месяц назад

Nice Camera Butter shirt!👌

@justinmuller4809 Месяц назад

thats cool! but i'ld adjust servo endpoints : ) you are right about german cars lol.. escpecially the multi link axles from audi / vw pain in the ass, but they drive beautiful

@CRO-dr4si Месяц назад

Hahaha… I’ve owned a couple of Audi and BMW and that working on a German car was bang on. 😂😂👏👌

@BiswajitBag-ur2em 21 день назад

Nice sir ❤❤❤

@koki.k Месяц назад

Back in the days we had 3 wires for the fpv camera, and you could just cut them and make them longer :)

@DaRoach588 Месяц назад

Interestingly the HDZerp Eco has gone back to 3 wire like analog... I'm excited to see if that continues in the future

@WarriorLife_fpv Месяц назад

Great video. Seems like it would be crazy hard to fly though except in angle mode maybe

@pgrcadventures1414 Месяц назад

First, pretty nice gimbal setup, I use a pan setup on my wing which is awesome.

@stst8301 Месяц назад

Second

@PerseidArchimedes Месяц назад

@@stst8301 hehe

@maddercat Месяц назад

this video is great, finally a guide on how to do servos...does this work with betaflight too?

@OdysseusVrakas Месяц назад

This is what the dji avata 2 wants to be

@defyent Месяц назад

lol, i made this same concept 7 years ago. Different tilt design but same concept. It was more about having a variable camera tilt angle for racing. It worked okay. Cool concept to use it for filming.

@techstuff6829 Месяц назад

Joshua, I assume you'd want to mix in a "GIMBAL PITCH" input along with the camera pitch override from the TX so that by default if you hold your head still the camera angle will stay fixed regardless of how the quad pitches, but if you tilt your head up and down it will "add" that to the stabilized pitch input to let you look up and down? Could even put CAMSTAB on a switch to enable the stabilization in flight?

@tysk5729 8 дней назад

Ive thougt of this allot, and i think its a pretty big deal not underwelming at al I mainly fly in simulator, and being able to switch between a big angle and a small angle for slow flying and hovering would mean a ton off difference Being able to controll this with your head seems perfect, as controlling it with switches seemed to suck

@xxstopusxx7120 Месяц назад

Hello guys since this is by far the most educated and smartest FPV community I would love to get a little help from you. I have the DJI Goggles Integra and I‘m looking to get some more range out of it. Do I need to replace the antennas on the goggles and my quads (Geprc Darkstar20, Mark5, Moz7) or is it enough if I for example just replace one of the two and which would you recommend? Thanks for any advice or tips you may let me know of🙏

@DanoFPV Месяц назад

I designed a mount to install the gopro/o3 medlin gimbal on an Apex evo LR 7" :)

@jpslaym0936 Месяц назад

This is the one thing the DJI fpv potato can do that makes it useful for capturing action sports. Still a drone that distentegrates when it touches anything tho

@KanaBaradei Месяц назад

JB there is an additional thing you can do with INAV while using a tilt camera. Instead of setting the servo to an RC channel, you can set it to the tilt gimbal function, that way it would behave as a stabilized gimbal (only in pitch ofc). Additionally, you can set the CAMSTAB function into the modes tab to select when the camera will automatically adjust the tilt. I'm guessing that if you combine all that with rocksteady, you can reach something close to an avata. I've been wondering how well this would work, could you perhaps make a quick video on it to show to the ppl? Thanks for the work you do for the community!

@divingfalconfpv4602 Месяц назад

Use position hold mode to fly with cam stab

@KanaBaradei Месяц назад

@@divingfalconfpv4602 Yeah that was the idea, but i'm more concerned about the servo smoothness. Tried to search videos of ppl doing it but literally noone has

@mxracingunlimitedltd7784 Месяц назад

@@KanaBaradei I mean it looks like the servo kit can do whatever you need, just need to make sure INAV keeps it centered to the Horizon first so it goes to center position..? It seems to be able to move plenty fast enough..

@M.Tops33 Месяц назад

Nice setup and nice shot, but not new, I have done something similar 3 years ago on a Hyperglide frame.

@thetom1309 Месяц назад

"like working on a german car" is awesome

@GarengPetruk Месяц назад

Thank you Uncle. I have followed, as in the video. where I soldered the line wire from the Runcham DVR's H/L pin to the M5 pin. and in the servo I selected it using the video that uncle made. but because I wanted to use the arming button together with the button to record video on the mini DVR, I selected the servo, namely the RC Chanel 5 input and it was detected. However, the current problem is that the H/L button cannot record fully. Oh yes, previously I used a Radiomaster Pocket Remote and I tried input 10, namely the Play button at the bottom right of the Pocket Radiomaster Remote, but the problem remained the same, namely it couldn't record. My DVR has a blue flashing light indicating it is recording but there is no recording in the video file. are there any other settings in the servo?

@revodrvr Месяц назад

Can I add a point on the osd to show u where normal flying position is of the camera. Like a home point

@SimoneAragno Месяц назад

That's crazy! For you it's possible to mount INAV and this Gimbal on a GEPRC Cinelog 35 V2? I read on the gimbal website that they've a versione compatible with the Geprc, but i have absolutely to use INAV? And so, i can install INAV too?

@marcdunivan2436 10 дней назад

Try 3-axis rotation...radio controlled model planes and helicopters use these. Motion Sic has many dogfight videos on RU-vid using a 2 axis gimbal.

@PollokPoochesDogWalking Месяц назад

im definitely going to crash alot with that upgrade!

@brianBZ1 Месяц назад

I think the spring is supposed to go on the outside pressing against the white bar

@y_us_12 Месяц назад

Hi Joshua! Could you answer the question that bothers everyone for years. How to transmit live audio with digital video like O3 unit.

@arkdronesfpv Месяц назад

The LDX-218 Servo has a stalled current of 2.4 to 3amps. The Matek 5v regulator has a continuous load current of 1.5 Amps (Max.2.5A 5s/minute). Should we be at all worried about that?

@Rothammel1 Месяц назад

pls check out the packet rate: 64 / 128-pos: The bit depth is dependent on the selected telemetry ratio. For a telemetry ratio of 1:2 and 1:4 these channels are 6-bit/64 pos. For all other ratios, these channels are 7-bit/128 pos. The 7-bit/128 positions is 12.5% the resolution of 10-bit, and 6-bit/64 positions is 6.25% the resolution of 10-bit. This may not be enough resolution for a head tracker but definitely enough for flight modes, flaps, gear, etc.

@swissfreek Месяц назад

13:43 Ahhhh, bringing back my nightmares! First car was a '94 VW Golf. Literal step 1 of changing the oil filter: "Remove front clip." 🤬

@runpuppyfpv5744 Месяц назад

I don't think you got those gears back together right buddy ! I'm thinking of putting inav on my chimera now

@aymanbabaRS6 Месяц назад

Hey Josh, great video as always. Isnt it possible to link to the a reverse pitch channel, this way you can maintain the object in screen regardless of the speed?

@techstuff6829 Месяц назад

That would be a good starting point, but you'd want the head tracker on top of that.

@JPspinFPV Месяц назад

It's a pretty chunky tilt gimbal, but I get it. I ran into the same problem with the mipi cable and ended up just going with analogue. So much easier.

@schweizerluchs7146 Месяц назад

Bigger servos are more precise, so I can understand the decision, oh, and for sure to support the weight of the GoPro.

@JoshuaBardwell Месяц назад

It's to support also the weight of the GoPro.

@spylife8650 Месяц назад

@@JoshuaBardwell I know this isn't about this video but wasn't shore how else to ask a question. I am new to flying drones. I have your 5" beginner build drone from like 4yrs ago when I am hovering and I give it 1/2 stick yaw it freaks out and climes like crazy for about 20 feet. Can you give me some pointers on where to start to tune this out?

@sebastianuhl Месяц назад

Is there a sim for that gimbal setup?

@mp-xt2rg Месяц назад

Any quad copter with video telemetry is fpv by definition.

@MamayFreeride Месяц назад

I've already built something like this. But I just wasn’t smart enough to get the power through the battery. Well, I connected it to LED contacts. Which, in principle, is the same thing as a PWM motor connector. p.s. What's going on? You don't need to buy Avata 2!

@emilpers1078 Месяц назад

This reminds me of Motionsic, but they can both tilt and turn. Looks better imo. But dont know if it will fit a drone. They were more for FPV planes.

@raypeery6317 Месяц назад

It's a nice piece of kit. Printing a mount for a quad would be trivial.

@blackwater7183 Месяц назад

I've always tried to figure out how DJI does it with their FPV drone. They use a slim type (pancake/gimbal) motor that has a magnetic sensor and probably has a dedicated module to control it. There are only a few manufacturers who sell gimbals but it's servo based and for fixed wings.

@jpslaym0936 Месяц назад

This drone gets lot of grief but it can capture subjects like action in a more professional looking way plus 4k video with no gopro and can fly 85 mph / 15 mile range rather than 50 mph max like Avata 2

@GiantAntCowboy Месяц назад

@@jpslaym0936 Yea, I was “late to the game” and just recently got a couple used DJI Drones for my family & friends to play with, but I actually love them for various reasons. (Posted a video about it) Of course I lost one of them in the first week during a mountain surfing test… lol!

@techstuff6829 Месяц назад

Camera drones and cinelifters use brushless gimbals as opposed to servos, which as you say requires a separate control module. Check out the SIYI A2 for a single-axis brushless gimbal camera, or the SIYI A8 for a three-axis brushless gimbal camera.

@GabrielPass Месяц назад

How about doing this on betaflight?

@Johow Месяц назад

I built something exactly like this in 2015. I bought the Attitude V2 since it was the latest Sh*t back then. I think I had a DJI Naza on a 450 flame wheel!😝😝😝 Anyone remember the frame? It worked okay but I constantly had to recenter the headtracker, since it was drifting. I would crash my 7inch if I used something like this today. How do you know what the drone is doing, while looking around???

@ezapata3200 Месяц назад

I used to tell people the reasonS I had become a DJI FPV PILOT WAS SMART SAFE LIPO AND ABILITY TO ROTATE CAMERA INFLIGHT ...

@Dartheomus Месяц назад

Congrats, you made an Avata! =) Nah, this is really great though!

@OTRaiNzy Месяц назад

@Joshua Bardwell next video: how to make drop system for fpv to shoot somesing... 🤣

@JohnIn2SonAZ Месяц назад

Looks home made.

@cinekenneth Месяц назад

welcome to fpv

@carcomp101 Месяц назад

Hey @bardwell... why hasn't anyone come up with a 180 degree camera "fish eye view" that has processing on the headset to generate the head tracking? We certainly have the processor power to do it, and it would be much more robust than servos. It would also be fast. You could theoretically move your head and have instant feedback like VR. I've suggested it many times and the only drawback would be "forcing less than HD by only taking a portion of the 180 degree image... less than HD" but that doesn't sound like a very solid argument.

@JoshuaBardwell Месяц назад

Sounds like a great idea. Why haven't you invented it yet? Hint: the answer to why you haven't done it is the same answer why nobody else has done it either. Ideas are cheap. Execution is difficult.

@lievenvv Месяц назад

Caddx + Insta360 collab coming up?

@ddegn Месяц назад

I think using a fish eye view type camera would require too many compromises to make it worth doing. I think you're much better off physically moving the camera. "the only drawback" Really, you think that's the only drawback? Fish eye lenses have all sorts of problems. The image quality would be horrible compared with normal action cameras.

@igort5418 Месяц назад

Bro just invented the wheel, lets wait till he invents tilting motors

@dabooge Месяц назад

It's been done a long time ago

@mattalford3932 Месяц назад

That's why the avata is so awesome.

@powersv2 Месяц назад

Could i just put my gopro there?

@mikeallenfpv Месяц назад

Should I just buy the "spare parts" if I want to build the Pro version myself? That would be dumb because they total up to be more expensive than the pre-built one.

@weppwebb2885 Месяц назад

I assumed if you want to build it you can get the files and 3dprint mit yourself (appart from servo, screws and belt obviously)

@mikeallenfpv Месяц назад

@@weppwebb2885 that's what I meant, though. I can print the parts that are printable, just got confused on the website about ordering the servo and other parts. I'm sure I'll figure it out. Just need a moment to sit down and actually do it :)

@gus8378 Месяц назад

I wish there was a lighter version for 5” lightweight quads

@lievenvv Месяц назад

Wasn't that the guy who put a gimbal on a whoop 😁

@papitolindo5092 Месяц назад

dude that shirt; and didn't Nurk do this before?

@TomFYouTube Месяц назад

For years, I never understood why quad pilots especially those of us that aren’t interested in freestyle don’t put the flight camera on a servo and a heading hold Gyro? That way, no matter how fast you’re going you’ll always be looking horizontally... It could of course be disabled with a switch on the TX.

@gregdavidd Месяц назад

I am not clear why he couldnt use the built in 5v bec?

@JoshuaBardwell Месяц назад

They typically can't handle the current draw of the servo.

@MaxSMoke777 Месяц назад

I keep trying to point this out, and dumb people keep shouting me down, but if you put half of a 360 camera on the front of a quad, and just broadcast a small portion of view to the pilot, related to where the pilot is looking, you could effective make a FULL GIMBAL camera view without any moving parts. You don't need moving parts to make a full gimbal-style view. It can all be done with software and part of a 360 camera.

@JoshuaBardwell Месяц назад

Ok good go do it. The reason nobody has done it is not because it's a bad idea, but because it's hard to do. Ideas are cheap. Execution is everything. When you have a working prototype, let me know. Otherwise, stop acting like your brilliant idea is being ignored by the unwashed swine.

@Robocopterfpv Месяц назад

@@JoshuaBardwellbased 😂

@Mupshot Месяц назад

I wouldn't have had the patience. I think I would have relocated the air unit

@YOKokob Месяц назад

13:57 😂😂😂

@PerseidArchimedes Месяц назад

ONE

@Alexgavcc84 Месяц назад

it's been out for a while and it needs more exposure

@jerryhoe7297 Месяц назад

Everyone goes to guy hands down

@tjburke79 Месяц назад

Did this more than 10 years ago 🤷‍♂️

@M-H433 Месяц назад

Why interest in inav lately?

@wtfmimshag Месяц назад

Johnny 5 (inch) is alive

@Pinakij Месяц назад

That’s so Symbian

@mad_villain8580 Месяц назад

Not going to lie, the German car joke hurt a little. Do it again.

@MaxWithTheSax Месяц назад

I can only immagine how cunfusing this is to fly.

@subspectacle Месяц назад

The reference to german cars is not accurate 😅 I have VW Golf and I can unscrew my oil filter easily without lifting the car and as a bonus it faces down, so no oil drips all over the place.

@jeffdughman9741 Месяц назад

You cant even see the gim i made for mine,, Ill make a video showing, mine is so much more simpler and smaller with more speed and power, it slick simple set up that will work and regular frames :) i cant wait to share it with every one ! yall guys have no idea what i have coming out for you folks with FPV gear in the near future !

@GabrielPass Месяц назад

Great, let's see it!