If you find the video useful, please consider supporting me with only 1% of what you spared with this job at a coffee price: ko-fi.com/ticktimeyt. Thank you :-)
WARNING: I'm not responsible for any damage. This is a complex procedure and has to be done by qualified technicians. If you aren't sure about it, don't do it.
Before working under the vehicle support it safely with jackstands and ramps.
To be sure that the car is level, I used a long level (about 1.2 m) and I put it between the two side lifting points.
I used FUCHS ATF7134 FE (spec MB 236.15) oil. You have to buy 10 litres to drain the TC, if you replace the oil only in the sump, 6-7 litres are enough.
You need a torque wrench in the range 4-22 Nm. Tools required are minimal.
I used a Meyle kit for oil filter, screws, gasket and overflow pipe: Meyle 014 137 1107.
Good luck and PLEASE SUBSCRIBE TO SUPPORT MY JOB :-)
20 июн 2022
