mercedes common fault door lock actuator fix aftermarket part easy cheap reliable MUST SEE

Подписаться 22 тыс.

Просмотров 131 тыс.

50% 1

#mercedesdoorlockactuator #lockactuatorfix #mercedesmodification
whats up guys back again with another video 🎥🎥
if your new to the channel im mikey
this is mikeyz vlogz
and on this channel 📺📺
i do a whole bunch of videos on mercedes benz w204
and now w203
how to videos
tips and tricks
fixes
common fault and issues
and step by step tutorials
helping other w204 owners to DIY themselves at home and help keep the money in your pocket 💲
so if your new to the channel consider subscribing ✔🤞
and joining the community asking questions ⁉
requesting videos and just helping each other out via the comments section i would love to have you as part of the channel
i also do some product reviews and comparisons time to time as i love to share the cool gadgets that catch my eye
HAS YOUR DOOR LOCK ACTUATOR MALFUNCTIONED
AND YOU NO LONGER CAN LOCK AND UNLOCK YOUR CAR DOOR?
THIS IS DUE TO YOUR LOCK ACTUATOR MALFUNCTIONING
in this video i show you how to use a universal lock actuator kit to fix your broken or malfunctioned lock actuator in your mercedes benz
this will apply to all mercedes benz with lock actuators
rather then having to pull part your rntire door frame inside and out in order to remove and replace your door lock actuator , using this universal part will allow to to simply install in on the outer inside door frame basically right behind your door panel
there is a spot that fits this actuator perfectly
you basically cut factory wires and hardwire this lock actuator to your existing controls for your lock
however this aftermarket part only uses two wires blue and green
so as shown in the video you will only be using two wires
grey and black stripe and grey and blue stripe
the other cables must be cut so that no signal is sent to the factory lock actuator
this fix modification saves both time and money ..especially labour
a job that would usually take an hr or so..will now only take you about 30mins depending on your skill level
i take you through step by step how to do this modification
and i must say for the end result it is well worth it
a used oem or genuine lock actuator for mercedes will set you back about 80 to 200 dollars
this part only costed 13 95 aud . which i bought locally in australia from a store called JAYCAR
however here are the links if you need to buy them online
i suggest ebay as its cheap and reliable
universal lock actuator 1pc
ebay.us/U44dDb
amzn.to/3dufHNa
tinyurl.com/yaw4yo7n US tinyurl.com/14mjdx90
tinyurl.com/y5htcbnz AU
2pcs universal lock actuator
amzn.to/3brQ6Ce
tinyurl.com/58alr2n4 ebau US
tinyurl.com/ud1i7esk ebay AUS
oem mercedes lock actuator
ebay.us/T4P2zE
from china cheapest but still reliable
ebay.us/geOyw7
in usa via ebay
ebay.us/9JiTOB
tinyurl.com/yjl644dl US cheap
if you have any questions feel free to leave a comment in the comment section below and i will do my best to answer them 💬💬
thank you very much for watching 👁‍🗨👁‍🗨
your support will help me thrive to make more content and videos for you guys
thank you from the bottom of my heart ❤💚💙💜❤💖
much love to you all
sincerely
mikeyz vlogz
DISCLAIMER ❗❗❗
PLEASE NOTE
this is my own personal vlogs. the views and opinions expressed here represent my own and not the people, institutions or organizations that i may or may not be related with unless stated otherwise My thoughts and opinions change from time to time,as i come to learn more and develop my own understanding about the things and issues that i am vlogging about. my vlogs just provide a brief insight of knowledge , views and opinions that i possess at that point in time, which may change overtime. comments are welcome. however please keep in mind that offensive, unrelated and tasteless comments may be deleted. this also relates to off - topic comments. i am not responsible for the content in the comments, or in blogs or vlogs and other online content that i may link to or refer to, other then the comments made by myself. i will not be held responsible for any damages or issues that may occur during or that may arise after the use of this video, if you choose to do so. this video should only be used as a guideline. i am not a qualified mechanic nor a qualified electrician or a professional.

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 468

@steveskobl305 4 года назад

Holy crap that is an excellent fix for the door lock... who would have thought....indeed saves time and money... thanks for sharing this it will help alot of ppl..especially now you dont have to go through the mess of removing the inner door frame.... thats gold..keep em coming mikey

@jessiejames4105 4 года назад

Mate just amazing u have saved me and im sure alot of other ppl money and time...thank you so much for taking the time to share...the info you share is priceless....

@Wisdom-Thinker 3 года назад

Great detailed instructions - installed one myself following your instructions and now I have power locks again.

@suhuynh82 4 года назад

When i saw all the work you have to do in order to fix the door lock i said to myself no way!!! But after watching your video im prepared to attempt this as u made it look so easy

@AsimEden 2 года назад

Hi Mikey, Brilliant Videos and thanks for saving us all a lot of time and money with this mod. Looking forward to checking out your other videos!

@pieterweyers9384 2 года назад

Hi Mickey. Thanks for this you save me a lot of money. Great idea. Keep up the good work.

@songheappham4996 4 года назад

Great stuff mate like always 🔥🔥

@3rdpedalmafia 3 года назад

I just did this to my w204 , works great ! The only thing I did differently was I used self tapping screws , not rivets, but did everything else the same. It works awesome! Thanks !

@MIKEYZVLOGZ 3 года назад

well done mate glad it worked

@3rdpedalmafia 3 года назад

This is why we do how to videos on RU-vid for sure bro ! I should have filmed mine but you did such a good job I didnt feel the need to , as I couldn't improve on a single thing you did , good job ! And thanks again !

@suhuynh82 4 года назад

Now thats a genius idea saves time and money just excellent as always

@benw2046 4 года назад

Excellent workaround thanks for showing

@michaelleroy4218 4 года назад

I like it mikey looks nice i dont know what other ppl like but i think looks really nice

@tb5176 Год назад

Have problem with my two back doors on me ml mercedes seems to be a problem with them bought two actuators waitin on delieverly cheers pal saved me alot of money for the two of them €20 with shipping👍

@alexvargas3078 Год назад

thank you! very useful with your tips it was a lot easier. Had it solved in just about 40 minutes

@MIKEYZVLOGZ 10 месяцев назад

magnificent

@hascg1 3 года назад

Thank you friend, it is the best I have seen, I have broken looking and had not found and it has been very helpful, thank you, thank you, thank you

@MIKEYZVLOGZ 3 года назад

so welcome

@Alemdarvecakr 3 года назад

I watched a lot of videos , i can say that this is The Best video , clear and easy, and cheap fix, i will try it on my w211.. greeting from Morocco 🇲🇦.

@MIKEYZVLOGZ 3 года назад

thanks

@MistaChubbz. 3 месяца назад

Did you end up doing it on your w211 I have the same car and was wondering if there is space for that!

@garethbird4259 2 года назад

Just done my passenger door. Thanks for the tips Mikey. Works as good as new! Cheers dude!

@MIKEYZVLOGZ 2 года назад

very happy to hear it mate..good job

@djnegro_ct7783 Год назад

Do you remember the wire colors?

@wernerschuller354 Год назад

@@djnegro_ct7783 meine

@shahanaraheel5982 3 года назад

Amazing 👏 saved me hell lot of money and effort. A little tip. Where you have to grind for easy moment of the shaft. Just install a screw into the body near by so the screw takes all the load but the lock shaft.

@MIKEYZVLOGZ 3 года назад

good tip I'm glad it helped u out .. this is something everyone should learn because it really does save so much time and $$

@sunnys14 4 года назад

I did this to my w204, the universal actuator lasted about 1.5 years, luckily I bought a 2 pack and the replacement took me 15 mins total!

@MIKEYZVLOGZ 3 года назад

yeah desnt last forever

@keenankerr5150 4 года назад

Before watching u i was so afraid..now i try it all and have managed to save a ton of $$$

@Chandawan7 Месяц назад

@MIKEYZVLOGZ Thank you so much for sharing the knowledge. Just installed and it works as normal. Indeed you deserve a compliment. 😊. Keep doing the great job.

@MIKEYZVLOGZ Месяц назад

cheers friend I appreciate u mate

@4guadalupe4 3 года назад

Thanks...good job. Very clear and easy.

@MIKEYZVLOGZ 3 года назад

thanks and glad to be of service

@CrucialSpeaks 3 года назад

Very cool. THANKS!

@villavids2785 Год назад

This video needs a thousand more likes! I just bought a two pack of door lock actuators for 11 dollars, and I only needed to fix one. Fixed my driver rear door lock exactly like this video. Easy peasy. Thanks for posting this!!!

@MIKEYZVLOGZ Год назад

aww your too kind mate..I really appreciate u saying that..but most of all I'm just glad it could help u out cuz for me that's why I started to do these videos cuz I was sick and tired of getting ripped at any mechanic for the smallest jobs ..

@Bridscape 10 месяцев назад

which colored wires did you cut because the rear doors have different colored wires for my w204

@MIKEYZVLOGZ 10 месяцев назад

hey bud cannu pls share the wires u used for a fellow subscriber pls ..as he just needs some help locating the wires needed

@johnmountford3007 9 месяцев назад

How did you do it? I just tried doing this on the rear door of my 2008 W204. But I can't as the pop-up button is not connected to a rod, but is actuated by a very thin wire running inside a plastic sleeve. I considered stripping the plastic sleeve, but the wire was too thin to fasten into the actuator connection block (and the wire would most likely just bend on actuation).

@RTSELLS 3 года назад

Nice. I'm doing this asap. Thx

@Switch_Hitta_Beats 4 года назад

Love all of your video's mate. Awesome content, editing and explanation. Keep up the great work.

@MIKEYZVLOGZ 4 года назад

thanks mate really appreciate it

@danielbarnatt9332 2 года назад

Thank you, finally found time to do this today. 15 quid and a hours work, it's sorted 👍

@amaansheikh1850 8 месяцев назад

What part was it?

@danielbarnatt9332 8 месяцев назад

I can't recall this was ages ago but I just bought "universal actuator" off amazon

@amaansheikh1850 8 месяцев назад

@@danielbarnatt9332thanks mate. Wife’s c class drivers doors giving her this issue I’m going to try and attack it on the weekend !

@MrTanahmed Год назад

Hi, thanks for the video guide. Just did the fix on my driver side door. Didn't have pop rivet gun so used some self tap screws. All works great. Might have to do some adjustments as it doesn't pop up as far as it should. Probably need to adjust the clamp onto original rod. Maybe I didn't extend fully before attaching or the aftermarket rod is catching on door panel.

@MIKEYZVLOGZ Год назад

did u shave the door abit cuz the rod rubs on the door panel that's why I shaved it

@wellsjulien9255 Год назад

Re drivers door master actuator Hey Mikeyz, your video was incredibly helpful, thank you! Just to confirm drivers door fix is exactually the same (on a MB W169 A class) Dont worry about all the existing wires, just locate the 2 power, in this case black stripe and green stripe. If the close/unlock out of sequence, just reverse the connection. One point to remember is to make sure the drivers door is closed before testing otherwise the 'lock' function wont work. Thanks again Mike

@MIKEYZVLOGZ Год назад

Yep it's what I knew all along

@yorkymc 4 года назад

Great information thank you from Ireland

@MIKEYZVLOGZ 4 года назад

thank you welcome to the channel

@robertjohn2249 2 года назад

Beautiful video, this will save people thousands of dollars at the dealership

@MIKEYZVLOGZ 2 года назад

I hope so

@TonySalafia Год назад

Thanks heaps. Saved me a lot of headache

@MIKEYZVLOGZ Год назад

awesome news .. good on ya

@tb5176 Год назад

Got delieverly today fitted two of them in a hour brilliant 👍

@MIKEYZVLOGZ Год назад

well done

@stiananonymousoppistov7469 8 месяцев назад

Thanks. This work good on my Norwegian 2007 W204 both sides front. You save me alot of money.

@MIKEYZVLOGZ 8 месяцев назад

ur welcome

@TheHomnguyen 18 дней назад

I'm looking to do the same for both front doors. You said something about master and slave units? I don't see that distinction made for units sold on AliExpress.

@MIKEYZVLOGZ 18 дней назад

@TheHomnguyen ok so it actually doesn't matter .. wen I bought mine it did make that distinction..hence why I thought it mattered ..but it really doesn't.. just use the slave one for any and it will be fine

@enquire422 3 года назад

I was thinking of this method for my ml w163 , then I found your video!!

@MIKEYZVLOGZ 3 года назад

cool man hope it helps u

@MIKEYZVLOGZ 3 года назад

cool man hope it helps u

@philipdeg1594 3 года назад

Season greetings pal. I have have been looking forever for a video like this one as I have the very same issue (left passenger door) with my c200 1.8l cgi for over two years.There is a similar video on the MB forum but it was not as detailed as this one.Actually, because of that video I bought four actuators but when came to the installation I chickened out because of the unclear directions. Yours have given me hope to finally repair this problem. Is it necessary to cut those two wires? In the MB forum video the guy simply connected as you did and it worked.Many thanks for your presence on this forum.All the best for 2021.

@MIKEYZVLOGZ 3 года назад

yes only cut the two wires u are using .. do not cut any other wires as u will lose a function ... just cut the two wires i connected to and u will be ok and everything will work 100%.. merry Xmas and happy new year to u too

@kenbirse1828 7 месяцев назад

So, I really appreciate this video as (to your point) it saves time and money. It was a tight squeeze, but worked very well. Because it is a 2010 E350, the color schemes were off, but it is GREAT. I used the green w/black stripe wire and the all-green wire. The remaining wires I tied back to the 'older' actuator. Unfortunately, now the indoor lock switch will not work. I've checked and see 3 wires from the door switch on the driver's side. They are grey,grey, and black with white stripe. Any idea how to fix this? Best, Ken.

@fauzyyusof9092 11 месяцев назад

GREAT INFORMATION.. THANK YOU FROM MALAYSIA

@MIKEYZVLOGZ 11 месяцев назад

ur most welcome buddy

@ok9275 3 года назад

About to give this a try. Having the same problem with my driver lock on my Mercedes as well.

@MIKEYZVLOGZ 3 года назад

u;; be ok, good on y a

@KBENNYdesigns 2 года назад

How did you go with driver door

@YusufPetersenCPT 2 года назад

Just discovered this problem on my car the same door, right now. Thank you for this ill have to see what ima do to fix i was hoping it just needs a reset but seeing all this video seems ima have to get dirty hahahah

@MIKEYZVLOGZ 2 года назад

ye .an no way around it ur gonna have to just do it .. very simple and easy fix

@brettgullatt2485 4 месяца назад

Hey man! Love the video, super helpful. I’m trying to do this myself on my 2007 GL 450, but the wire colors are different going to my right rear door actuator. Would you happen to know which ones I should splice?

@MIKEYZVLOGZ 4 месяца назад

hey bud so sorry as i haven't worked on your car before its hard for me to say , what u need to do is find your door schematics, and it will tell u which is which wire, however when u open the door u should be able to see what goes to the door actuator and that will def get u one step closer , for me , after i knew which cables they were i still has to confirm, so i followed the wires and triple checked they went to my actuator, in the end there should only be 2 wires that power the actuator becuz all it does is send the power wen u lock and unlock, its actually very straight forward wen u break it down, but i know it can be overwhelming, my best advice is find the schematics, or ask forums and someone can guide u very quickly, im just sorry i dont work on your specific car and all cars have different wiring

@brettgullatt2485 4 месяца назад

@@MIKEYZVLOGZ no worries, thanks for the quick response. The way our doors are set up, they are very similar. Just like yours, I have 5 wires wrapped in fabric that go into a hole towards the actuator. Do you know of anyway I can test which ones give power to the actuator without taking the whole door apart? lol I’m guessing I could maybe just test the voltage on each of those wires, but haven’t tried it yet. All good if you don’t have an answer, just talking out loud here

@raymondfong32 2 года назад

Great information and I just have the same case for my front left and right doors. I am going to order it from China coz I am in Hong Kong. Thank you.

@MIKEYZVLOGZ 2 года назад

good on. ya

@raymondfong32 2 года назад

@@MIKEYZVLOGZ I try to install the actuator, but it just only active when i press unlock. no response when i lock by the key. do i need to unplug the green plug and put it back in? is only of the fuse is broken?

@MIKEYZVLOGZ 2 года назад

@@raymondfong32 it should work maybe a connection loose cuz should be simple two wires to power device .. so wen u press lock and unlock it sends power to the device to spin ..that way it keeps rotating and locks and unlocks ... that how it works .. so in your case ..u must be missing something

@amratnavekar6670 2 месяца назад

Simple hack mate fantastic

@MIKEYZVLOGZ 2 месяца назад

thanks mate...I appreciate u

@eagledeoro 2 года назад

Thank you for sharing. I wish I had seen this before I had wasted time and money replacing faultty cheap mercedes parts. Mercedes should be ashame.

@MIKEYZVLOGZ 2 года назад

indeed

@paulcookney123 3 года назад

Cheers mikey

@MIKEYZVLOGZ 3 года назад

no worries mate glad ro help... i will take a look and see what i can come up with ... but ifu have to the rear actuator locks are much easier to replace then the fronts so its still a good thing... but of course it would be great if we could do the same for the rear doors

@alangonzalez2241 10 месяцев назад

hey mike cool vid looks simple witch one do i order if im doing driver side on a 2008 mercedez bennz C300

@MIKEYZVLOGZ 10 месяцев назад

ok so it doesn't matter ..u can still use the slave for driver side just follow the same cable colours... it will still work..I was simply just trying to state the rest are slave compared to the master where the main unit is..but u can still use the slave gor the driver side and it'll work just fine..the principle is to give power to the actuator wen u press lock and unlock which intern sends ppwer to the lock actuator motor which then spins and locks then unlocks the door ..that's it

@zakariaallie4843 2 года назад

Hi Boet nice video can’t you maybe a video to do the back doors because it doesn’t have the same set up as the front door . Please and thanks again

@MIKEYZVLOGZ 2 года назад

Great idea

@aytech5905 4 года назад

Thats so useful

@lazlimo 11 месяцев назад

Hi Mikey, Thanks again for your video and personal responses you have given me. I feel you should highlight the fact that the master after-market controller will also work as long as we use the correct colour wires as you prescribe. I feel you need to highlight the fact that there is minimal clearance for the new guide rod and that many many hours will be wasted by trying to move or bend the rods, in my case I had to do it so many times that I damaged the connecting bracket screws hence I needed to find a replacement. To help with the clearances I ultimately stuck some weather seal tape onto the door running parallel both sides to the connecting rod. This has allowed the clearances needed and now my after-market door actuator is working fine. Thanks again.

@MIKEYZVLOGZ 11 месяцев назад

did uptake note of the fact that I shaved my door so the rod could slide up and down easily?? is this what ur referring to? .. that's why i s shaved the door instead of trying to do something else..because u can't see it on the inside and It will not show on the outside nor ruin the door in anyway... I basically shaved like 3 to 5mm off where the rod as rubbing ... and it worked perfectly

@MIKEYZVLOGZ 11 месяцев назад

but thanks for ur input this will help others .hence why I leave comments section open so ppl can also give their experience in order ro help another I divided who has encountered the same problem

@MIKEYZVLOGZ 11 месяцев назад

I have always stated that it's possible le to do the Master using same wires.. although in video I stated u may need the master ... it was just a precaution... but everdently will work because all your doing is supplying power to the actuator motor to spin wenever it gets 12v power introduced through the lock and u lock mechanism

@kenbirse1828 7 месяцев назад

For a 2010 E350 W212 driver's side replacement,I was was succesful in installing 2-wire solution to green w/black and solid green. Remote key fob works, but not inside manual door lock switch. My question: In the scenario above (w212 driver front), should I use master actuator, or better yet can I attach both 2-wire new actuator wires to the wires off the inside door switch? Anyone been through this?@@MIKEYZVLOGZ

@davemccready6013 2 года назад

Ingenious, I just ran into this as I worked through some of my codes and although I have a 2010 W212, i’m going to attempt to see if this is possible. As others have done, I too saw the insane labor involved and honestly, I accepted the fact of having to manually lock and unlock. Huge thanks for the idea and I hope to report back that this is possible on the W212 as well.

@MIKEYZVLOGZ 2 года назад

good luck I'm sure u find a way mate mercs have alot of room behind door

@AsimEden 2 года назад

Hi Dave ive got the 2010 E350 W212 and have had an issue with my rear drivers side actuator not working. I am really thankful to Mikey for doing the 2 wire Universal Mod and was thinking i should try this aswell! Any luck with doing yours yet??

@davemccready6013 2 года назад

@@AsimEden I hate to say it but I haven’t had the opportunity to do this yet, I have plans to take care of this in the next 2 days so hopefully I should be able to let you know. I was able to order the actuators from Amazon which came as a pair for $10 and I picked up a box of assorted solder-less heatshrink connectors and assorted heatshrink to complete all for under $30 total. I will say what gave me the biggest issue and something I may be able to ultimately help you with is making sure of the 2 correct wires to connect to. I bought the Emanual online and although it was only $27 and it is basically the exact same program the stealership uses, including work hours and write ups for charges. The problem with this was I expected a PDF workshop manual that turned out to be a very difficult program requiring to download another program to run. It makes it difficult to find what you need unless you’ve been trained to use a factory dealership program. It took a couple of weeks during the days i had to spend on it, to learn how to navigate and find the diagram I needed and then I had to change my Bios to run the system to print out the needed info. So if you are considering a manual don’t use Emanual, I would try a different one, but also if i’m successful then I would be happy to let you know if the rears are the same colors or exactly what they are. I hope to report back in the next few days.

@AsimEden 2 года назад

@@davemccready6013 Dave please dont worry dude..... my actuator has been duff for the last 2 years lmao so no worrys you're doing ok! I've had some experience with these manuals and didnt bother in the end, even the Mercedes WIS/ASRA/EPC programs you can get on ebay and the like are really difficult to install. The saving grace here is that Mikey has quite nicely explained very well the wiring code with regards to the door actuator (Grey-Blue and Grey-Black). MB are pretty consistant with their colour coding so should be the same on ours. I noted that you have come across the low melt solder heatshrink, did a job on a VW Sharan fault with regards to the Fuel Temperature Sensor last week. The guy brought it to me after his mechanic had fitted a new sensor but the fault code and money light was still on. I found the fault to be a broken wire in the loom which was telling the ECU that the Voltage was high from the sensor so Engine light was put on. Found the wire break and used this solder heatshrink, worked beautifully! I've also found the Universal actuator on ebay and have ordered today......depending on the weather this weekend i might give it ago. i will let you know what i find behind the panel.

@davemccready6013 2 года назад

@@AsimEden I’m in the same boat going on 2 years of locking the drivers door manually from the rear. So Mikey was a god sent idea. Glad to hear about the connectors since this is my first go at using them, not a fan of crimped. As far as the wiring goes the colors are different on my front drivers door according to the diagram, but should know for sure tomorrow. I’ll update what the colors are and post an FYI.

@johnlee2326 3 года назад

Hey Mikey thanks for the video, for driver's side suppose you buy the master actuator and connect 4 cables? (Instead of 2 wires)

@MIKEYZVLOGZ 3 года назад

i believe so i havent done it yet but yes i believe so...

@sharol6336 3 года назад

Which cables? Tnx

@user-xr5bi1mg3n Год назад

Hi Mikey,thank your detailed instruction Videos.Do you have videos about rear doors?

@MIKEYZVLOGZ Год назад

no as I haven't needed to do it.. however I've been told that it is possible and it's the same procedure ... just ensure u check and measure a spot that will house the actuator before going any further

@tomdouglas7466 Год назад

@@MIKEYZVLOGZ hi,both my front doors have stopped locking or unlocking. will the after market actuator work on drivers door too?

@MIKEYZVLOGZ Год назад

@@tomdouglas7466 yes it will now I'm not 100% but I've been told from subs rivers that have done it it's the same procedure ...

@parthik899 3 года назад

thanks Mikey. Very helpful. Does the rear left door have enough room to fit this actuator ?

@MIKEYZVLOGZ 3 года назад

not sure as i havent done it yet but im sure you can find a spot for it

@Wisdom-Thinker 3 года назад

@@MIKEYZVLOGZ Just finished installing an actuator in one of my rear doors and all is fine. Same colour coded wiring. It was bit more involved because part of the lock cable has to be stripped and then secured.

@stray78 2 года назад

Hello Mikey thanks for the tips mate you helped me also with my ESL 👌 My rear passenger door UK model won’t open even though both outside and inside handles feel really solid so nothing feels out of place or broken. Do you have any tips for that ? Is the replacement door lock actuator going to fix this issue? Thanks a lot

@MIKEYZVLOGZ 2 года назад

does it unlock ? if it does then u may need to check the part that latchs onto the door handle ... its a wire that the door handle pulls on

@stray78 2 года назад

@@MIKEYZVLOGZ it doesn’t unlock (key fob) When I do pull the handle from the interior the lock pin pops up but the door won’t open. Obviously I am careful doing that as I have seen lots of them braking.

@stray78 2 года назад

@@MIKEYZVLOGZ is this wire accessible easily or do I have to remove the window and get to the mechanism ? Also are those £15 universal locks suitable for the rear doors ? Obviously sorting out the wire is one thing but while I am doing that I probably would have to change the actuator it didn’t sound that lively..voltage is good and battery in almost brand new

@lurumtaza2884 3 года назад

Thank you very much. I've done mine, driver's door. The cheapest and easiest 👍👍👍

@MIKEYZVLOGZ 3 года назад

I'm glad it helped well doneit was the same wasn't it ?

@sramzurc8000 Год назад

Hello everyone! Just wanna ask if anybody tried this on their rears? Thank you everyone and thanks Mike for a very helpful videos! Bless y'all!

@terrymurtha2451 3 года назад

Mikey, you are undoubtedly a genius and I bought the actuators so thanks, but my wires don’t have any grey/black or gray/blue. And I don’t think I can trace back to actuator without removing the metal plate. Any suggestions?

@MIKEYZVLOGZ 3 года назад

there must be a way to trace the wires out from the actuator .. in ur case I would try get the schematics and see exactly which wires are for the actuator that way u don't have to trace or guess

@terrymurtha2451 3 года назад

Hey thank you for your super quick response man. I’m gonna pimp you everywhere. But I did see that I have eight wires going into my actuator. Six of them go into a pin clip and the other two I can’t figure out where they go. I can’t help it I think the other two are going to be my power. Thoughts?

@MIKEYZVLOGZ 3 года назад

@@terrymurtha2451 that's my best guess ... schematics would definitely help... apart from that I would onl suggest tracing the wire ... another good place to ask is the forums ..maybe someone else has had the same issue and there's an answer already ...

@zinabhussein3513 2 года назад

Maybe use a contactless voltage tester to know which wires receive power when locking or unlocking

@MIKEYZVLOGZ 3 года назад

I did some digging and the driver side is the same as the passenger side guys so easy fix

@johnmountford3007 9 месяцев назад

Hi Mikey. Another request for a video on fitting the actuator on the W204 rear door. I have had a go, but can't see how to connect the actuator to the existing door button as there isn't a rod. It is actuated by a very thin wire running inside a blue plastic tube (which runs the length of the door). the wire slides inside the tube (works like a bicycle brake/gear cable). I suspect that if I cut the sleeving, and somehow manage to connect the replacement actuator to the exposed wire, that the wire would just bend on actuation. Cheers John

@MIKEYZVLOGZ 9 месяцев назад

ok imma look into it

@ticktime6569 2 года назад

Great video, thank you very much. Do you know if for the rear door is the same? I don't think so if I remember well. Thank you! :-)

@MIKEYZVLOGZ 2 года назад

yes very similar just make sure u choose the right spot to mount there's a spot perfect for it too.. ull see when u take door off

@ticktime6569 2 года назад

@@MIKEYZVLOGZ All the best, thanks again!

@MIKEYZVLOGZ 2 года назад

@@ticktime6569 cheers matey

@johnkatopodis7878 4 года назад

Hi great tutorial and help.. my drivers door wont work..could i use the slave actuator instead of master one? Any advice. .thank you

@MIKEYZVLOGZ 4 года назад

yes i believe you can all you need to do is connect the right wires to make it work...

@johnkatopodis7878 4 года назад

Hi mikey. Good news i installed slave actuator drivers door w204..works fantastic! Just cut grey wire with blue stripe.and attached blue wire to it.green to grey with black stripe..thanks again for your great tutorial videos👍👍❤

@MrRjb777 Год назад

Hi Mikey I’m wondering if you would know the two coloured wires to use on a 2009 E250 as they are different to your video

@MIKEYZVLOGZ Год назад

I don't vest way would be get wiring schematics

@adriancrozier8270 Год назад

Could you please do a back door actulator as it looks a lot more difficult Thanks great videos

@MIKEYZVLOGZ Год назад

I don't have the problem as yet buy I will try and see if I can do a guide for u

@adriancrozier8270 Год назад

@@MIKEYZVLOGZ thanks would really appreciate it

@blessed_curse9992 Год назад

Great Video. Does it also work on drivers side door? I heard you say that the master door might be different?? Thanks in advance.

@MIKEYZVLOGZ Год назад

I confirmed that driver side is the same

@blessed_curse9992 Год назад

@@MIKEYZVLOGZ thats great. Thanks. Already ordered one. Im sure your video will help. Thanks

@sc225 Год назад

Question my w204 2010 c350 4M is left hand drive (canada) the driver size lock not working (left) and what is that about when I look at the Amazon. They have a kit with 4 actuators 3 of them with 2 wires and one have 5 wires. What is that one with 5 wires for ?

@margaretgraham8122 2 года назад

Was wondering if you have a similar solution for a Mercedes Sprinter 2013 sliding door passenger side. Thank You

@MIKEYZVLOGZ 2 года назад

can't say I know for sure

@brettgullatt2485 4 месяца назад

Thanks!

@MIKEYZVLOGZ 4 месяца назад

thanks bud ur too nice .. I appreciate u...

@MIKEYZVLOGZ 4 месяца назад

I'll actually see if I can try find the schematics for u

@brettgullatt2485 4 месяца назад

@@MIKEYZVLOGZ thanks man! All good if you can’t find it, but that would be a big help

@MIKEYZVLOGZ 4 месяца назад

thanks for the donation bud u rock

@navyfederaI 3 месяца назад

tried it on my driver side door and it worked

@MIKEYZVLOGZ 3 месяца назад

well done ..as I stated in other comments .. I was sceptical about whether u needed a slave for driver door ... and after fellow subscriber told me he did the same I was corrected and now understand that u can do the exact same to the driver side

@alhodge9671 2 года назад

well, Thank You I got a ML350 2009 right passenger side. can I find the wires with a probe light?

@MIKEYZVLOGZ 2 года назад

ebay mate just type I'm lock a tuator on ebay and it will show

@anthonyredfern9405 2 года назад

Hi. Great video. Did I understand correctly that it cannot be fitted to the driver's door? Is it possible to only splice it to the wires to the motor leaving all the others? ps this motor looks suspiciously like that on the steering lock. How many cheap Chinese motors are there on this "premium " brand?

@MIKEYZVLOGZ 2 года назад

lol...I know right...for such a beautiful name brand car ..why did they cheap out on certain parts? that's the question isn't it... and as for drivers door... usually u would use a master actuator lock...but I guess in theory all u need to do is provide power to the lock actuator so it can lock and unlock the car lock... so with that said ...it just may be possible to use the exact same for driver side ... cuz all ur really doing is connecting a power circuit so that wenever a lock button is pressed it will power the actuator so it can spin locking and unlocking the lock 🔐

@flashg252 Год назад

Mike do you have a video for a rear left side for a c220 2010?

@MIKEYZVLOGZ Год назад

no I don't but I will be working on it this year. I've had a guy tell me that it's also possible to fit an actuator in the rear door ..bit must be a precise spot as there isn't much room

@greenie_the_detailer2499 6 месяцев назад

Jow about rear doors mikey? They are slightly different to this. Any reccomendations?

@MIKEYZVLOGZ 6 месяцев назад

i havent done them as yet but i am def gonna do it..cuz u guys have been asking alot about them..if u scroll through the comments same principle..there is a sweet spot for them too...just gotta make it work ... ppl have already successfully done using same principle

@greenie_the_detailer2499 6 месяцев назад

@MIKEYZVLOGZ they have a different mech for the pop up lock though same wires I'm guessing just have to tie it into the factory pop up the correct way I guess. Thanks heaps for your express fast reply mate 👍

@MIKEYZVLOGZ 4 года назад

hey guys thank you so much for all the support... if you want to support me further pls check out my patreon account under mikeyz vlogz...no obligation... www.patreon.com/mikeyzvlogz

@Kingy94_- 2 дня назад

Alright mate i have the same problem with mine but the door wont open so i cant do anything with it until it opens do you know how to get it open please mate? Just tried taking the panel off from the inside to see if it could be fixed but it defo needs to be open

@MIKEYZVLOGZ День назад

@@Kingy94_- u can't open from the outside? or the lock pin won't unlock either M

@Kingy94_- День назад

@MIKEYZVLOGZ it won't open outside or inside, i think the lock actuator is broken and is behind a pivoted steel panel after you take the interior panel off and it reveals the door mechanisms. But where i think i need to get to is behind the pivoted steel panel, and it is impossible to get to with the door being closed. Had someone look at it today, and they are not sure how to fix it yet. Thanks for your quick reply mate

@adriancrozier8270 Год назад

Mikeyz could you please do a back door universal actulator please as it looks a lot more complicated Thanks

@MIKEYZVLOGZ Год назад

I'll try do 1 asap

@adriancrozier8270 Год назад

Thanks Look forward to it as it is a lot more difficult to do

@michaelpeterson358 Год назад

Do you have any idea if this will work on a 1999 E320? W210

@MIKEYZVLOGZ Год назад

nor sure

@tsancyilynch5568 2 года назад

Will this work on my 2010 e350? But I'll just get master instead of slave?

@meltn2me 8 месяцев назад

Thank you for the video!! I have been looking for something like this. I have a ML350 and I'm about to change my passenger door lock, but I don't have the color wires you have. I looked up the schematics and I believe my pink/black and white/black are what I need to cut, but how do i know what to connect the blue to and the green to? what is the difference? I didn't see you explain the difference in your video or i missed it somehow. also, you cut wires to power. do i also need to cut some power wires? or just the two wires only? thanks in advance

@MIKEYZVLOGZ 8 месяцев назад

as for the blue and green ..u just do a trial and error test run ... im pretty sure polarity doesn't matter .. follow the wires that come right off the actuator ..whichever powers the actuator..you connect to those wires and ur good to go.. the actuator only needs power to spin so when u press lock or unlock it send power to the actuator to spin ..that's it.. but u can always switch em around if it doesn't work

@meltn2me 8 месяцев назад

Great thank you 😊 here goes nothing lol

@MIKEYZVLOGZ 8 месяцев назад

@meltn2me dw it's only 2 cables ur really connecting ..u can't really stuff up... even wen i cut the wrong cable it's color coded so u just reconnect ... and all g..i accidentally cut the rotary tumbler switch cable and it was for the door led..it somehow related to it and luckily i noticed and reconnected it ..now all is well and locks back to normal

@vencitostoyanov7479 Год назад

Fits on x164 rear left door, easy install with lots of space. The colours are WHITE and PURPLE with BLACK.

@sidneywilliams7958 3 года назад

Excellent video you mentioned a link for the universal lock actuator would love to have it since my has failed so far

@MIKEYZVLOGZ 3 года назад

links in video description

@genevievemagennis411 3 года назад

Hi Mikey, will this work for all models. I have a 2007 ml280cdi. I was quoted $1000 for one actuator and door lock combined. Both my driver door and front passenger side have gone. Can you please confirm which ones in need to buy to make sure I understand. As a single mum I have no idea and it seems hard but I’m willing to give it go as I can’t afford to fix it otherwise. I’m currently climbing from the back seat to open it. Stupid the key doesn’t open it either. Thank you

@MIKEYZVLOGZ 3 года назад

hi ... firstly i cant say definately if it will work on ur model as i habe never done it on other models.. but from how the actuator works ... it should be thr same procedure and should work..as all u are doing is sendinh power to the after market motor in order to allow the door to unlock and lock again... theoretically it should work..its just a matter of finding the righy spot to mount it.... if i were in your shoes i would give it a go... as the part is very cheap and its better then spending $1000 .... remove your door frame have a look at the wires you have and see if they match ... getting schematics would help alot as it will show you exactly what wires go where and what they do and what colour they are... but from experience merc like to use the same colour codes for wires ... but really only one way to find out and that is to remove the door and have a look... i hope this helps you out somewhat...

@Verociity Год назад

I have an A170 which won't lock with the key but WILL lock itself when driving, so it's probably not the actuator right? However it can't be the key either because it does lock all other locks except the driver side. Edit: turns out it was just the key batteries, 2x new CR2025 batteries fixed all 4 door locks instantly.

@vladyslavbudko7042 Год назад

Hey, thanks for your video. I have MB w164 and I’m try do the same like you said, but I have another color of wires. And it’s only close the door but not open. I have white, brown, pink with black line and purple with black line. Maybe you have some ideas what I do wrong. Thank you.

@MIKEYZVLOGZ Год назад

hmm, yeah diff car will have diff colours, u need the schematics to be sure friend sorry i am not familiar with your model...

@vencitostoyanov7479 Год назад

The ones you need are white and purple with black. It is an easy fit for the actuator, it works for me -x164

@Rylin_RyRy Год назад

Can you help me out? Where is the fuse for the driver side back door hatch open button on a GL450 Mercedes? Thank you so much🙏🏽

@MIKEYZVLOGZ Год назад

Hi friend to be honest. I'm not too sure.. if u have a manual I suggest looking through that or use google and search for what u want to know... ud be surprised what u can find on the net. Wish I could be more help but in only really familiar with the w203 and w204 as they are the cars I own... apologies

@LakeyCakez 2 года назад

Hi these don’t deliver to uk where I am based would it work with a different universale actuator as I am afraid the wires may be different colours to what you show on the video

@tomdouglas7466 Год назад

universal lock actuators on ebay.i just got 2 for £9.40

@stephenhall4432 2 года назад

Hi Mikey, a very useful video. Will this method fix my door issue? The lock button moves up, but the door does not unlock, You have to press lock and unlock several times to open the door. You used two of the four wires, did you snip the other two or just leave them?

@MIKEYZVLOGZ 2 года назад

leave them buddy cuz it controls the led for the door ...I saw another guy post that u cut them buy if u do u won't have the led for your doors .. so only snip the 2 wires h need

@benbergmann8748 2 месяца назад

@stephenhall4432 I have the same issue. Did you try this in the end and did it fix it?

@vicgnu4850 2 года назад

Hey what if u have the air lock system and im lost if pump bad or anything will your lock system bypass that

@MIKEYZVLOGZ 2 года назад

I'm unfamiliar with the air lock system.. do u mean where it uses the air in the hose to lock and unlock the door lock? I can't say I'm fully knowledgeable about that system ...although I do know the older models tend to use it.. like my w203 ... however ... I can't say indefinitely that it would work ... sorry couldn't help more ..u may need to consult an expert

@domenickcutugno1677 2 месяца назад

I have a 2009 ML 350 that the driver side door actuator is not working correctly. Will this fix work on it? In your video you mentioned that this fix works on the other doors but I’m not sure what you meant as far as what I need to do on the driver side.

@MIKEYZVLOGZ 2 месяца назад

hi mate thanks for watching. what I meant is you can use this same fix on any other door rear ... and u don't need a master cylinder for driver door ..just a slave will work..so long as u identify the 2 wires that supply power to your factory actuator..connect the after market to it and it will work the same

@nelsonmaldonado7094 Год назад

Question . If I used that door actuator the alarm is still work?? Have the same problem on mercedes 2009 c 300 driver side door

@MIKEYZVLOGZ Год назад

yes it will it's just to change the motor that spins the lock the alarm is connected via cars ignition system and ecu and that's what tells alarm to activate and deactivate when u lock unlock

@DazdProductions Год назад

So my driver door accuator is gone, im looking for the "Universal Car Central Door Lock Actuator locking Motor Gun - MASTER verison" ? is this correct? thanks!

@MIKEYZVLOGZ Год назад

same pinciple u can use a slave lock actuator doesnt have to be a master ..so long as it gets power wen u lock and unlock it will do the exact same job.. it has been confirmed by other subscribers its the exact same job

@kimmolopperi1451 9 месяцев назад

I have to get it done when i get somewhere that aftermarket part 😁 but what wires you have to cut, this video looks like that you are cutting more wires than only two ? 14.08 looks like there is pink wire also cutted 🤔 but very good video 👌 have to know the right wires

@MIKEYZVLOGZ 9 месяцев назад

i tell u in the video which ones to cut and i also explain on the comment as well

@kimmolopperi1451 9 месяцев назад

Aftermarket part came today and I put it in place and it works so thank you again 👌I buy it aliexpress two pc and only 12 euros. Only problem is that door panel do not fit in place 😄 little bit different part than you do so have to measure more and drill new holes etc. but I know it fits someday 😁 Here in Finland in the autumn second problem is that here always raining and have to fix outside so it is little bit annoying

@MIKEYZVLOGZ 9 месяцев назад

excellent news mate

@yonicat 2 месяца назад

U cut 4 wire u explain 2 to connect which other 2 did u cut?@@MIKEYZVLOGZ

@mohomadsari1329 3 года назад

Hey mind is the rear passenger door are you able to advise

@MIKEYZVLOGZ 3 года назад

it's the exact same procedure and there is a spot that will fit the actuator too ... so yes it can. e done easily just ensure you mark measure twice and drill once ... and test fit always first if ur unsure .. wiring is same ...

@diohernandez3271 2 года назад

My passenger door is stuck open would this fix the latch issue?

@petergiannitsadis3561 10 месяцев назад

Hi I need to use this door actuator but I need the master for my 2003 clk 240 the master has 5 wires. blue.white . Black.brown and green can you please tell me which wires to connect to on the driver's door like which colour connects to which colour of the car door wires thanks.

@MIKEYZVLOGZ 10 месяцев назад

easiest way is to find tour cars schematics ... I'm sorry to say that I'm now familiar with your model ... I habe only worked on the w204 door lock actuator ..but if u follow the wires see which ones goto the actuator ..same way I did in this video ...... then there is always trial and error ... u can just use a slave actuator ... as it works as well... the main is just rendered to as the master ... but u can use the slave in place ... u can find tour cars or schematics ..or Google it and someone would have done it before so they can tell u which cables power the actuator

@garethbird4259 3 года назад

Can you just clarify which colour wires you cut to disable the power to the factory actuator. Cheers

@MIKEYZVLOGZ 3 года назад

grey with black stripe and grey with blue stripe

@Lwmusic1000 18 дней назад

Will this work on the rear door of a 2008 s550 mercedes

@MIKEYZVLOGZ 18 дней назад

dhonestly i cant say for sure as i have never seen it before in that car or worked on it, sorry i couldnt be more help

@roncalvo251 Год назад

Can I iuse this on mercedes 2009 gl 450. ? I see no room to put actuator? I seen videos of door panel removal and don't see any room.?also do you have the part number for actuator? Thanks so much

@MIKEYZVLOGZ Год назад

u should be able to.. there wasn't enough room to use this actuator ..but I made it work by shaving the doornpanel down ... u can use it as long as u make some room

@LaurieTatana Месяц назад

Will this work on a Mercedes C320? Ty.

@MIKEYZVLOGZ Месяц назад

yes it should

@martinrivera2950 Год назад

Hey Mikey, great video but why this wouldn't work with the drivers side door? That's my problem drivers side.

@MIKEYZVLOGZ Год назад

it can and will... I was told from another subscriber that it's the same procedure on both doors... driver side is referred to as master and other doors as slave .. if u use the same cables and install the actuator.. all that matters is that wen u lock and unlock it powers the actuator to spin and thereby locking and unlocking ... the actuator is a motor that spins infinite rotations according to when u gibe power to it.. everytime u press lock or unlock. it send power to the actuator and spend the motor in turn it locks and unlocks... hope this makes sense ..so in theory it will work..and I've also been confirmed by others as well

@martinrivera2950 Год назад

@@MIKEYZVLOGZ Thanks Mikeyz very helpful.

@MIKEYZVLOGZ Год назад

@@martinrivera2950 ur welcome bud

@adriancrozier8270 2 месяца назад

Did you ever do a rear door actuator as this looks more difficult ,?

@MIKEYZVLOGZ 2 месяца назад

definitely abit different but I haven't had any issues as yet so haven't done it ..but I def will consider it as alot of u guys have been asking for it so def will do it ...

@BjarneIrvingJorgensen 3 месяца назад

HI MIKEY. I amm looking for the same actuator for my W204's passenger door, haven't been able to find the same as in your video on Ebay. can you put me in the right direction please? It's an Right Hand drive.

@MIKEYZVLOGZ 3 месяца назад

sure I'll sens u a link

@BjarneIrvingJorgensen 2 месяца назад

@@MIKEYZVLOGZ thank you!

@lindseysanchez8035 3 года назад

So my mercedes that I just bought it has a bouncing lock. Tonight when I tried to fix I saw videos of everything they were pulling off and out. Which is alot. I love your video I am gonna try this. But I noticed in the beginning of your video you said I didn't need to put this on all doors. Now the bouncy lock is on my right front but noticed tonight that all the other locks don't budge at all so now were would I put the universal actuator r should I get 4 of them and put on all 4 doors

@MIKEYZVLOGZ 3 года назад

hi Lindsey so all u need to do is follow the video regardless of which door your trying to fix and it will be ok .. the bouncing lock is from a pin breaking or actuator malfunctioned... in any case u can do this to fix it ... much better and cheaper then replacing the actuator with an oem or genuine part.. also alot less trouble as well... the wires will be colour coded the same so as long as u do exactly what I did u will be ok.. gluck hope u get it sorted

@MIKEYZVLOGZ 3 года назад

wen u say the other doors or locks don't budge do u mean they all don't work ? or only the front right doesn't work? whichever doesn't work fix it using this method and u will be able to fix it .. u can also do this for the rear doors ..same cables same colours ...

@lindseysanchez8035 3 года назад

@@MIKEYZVLOGZ I believe all four doors don't work the locks don't move at all on the other 3 doors and the right front is the bouncing lock

@MIKEYZVLOGZ 3 года назад

@@lindseysanchez8035 that's doesn't sound good... have u checked its not just fuses ? google your cars fuse diagram and check fuses relating to the door lock pins... I all else fails then I would try taking the door off and seeing if there's any loose connections